! Started logfile: /scr/pima/rv123_uvs/J0102+5824_X_dfm.log on Sun Dec 23 00:39:06 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv123_uvs/J0102+5824_X_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J0102+5824_X_uva.fits ! AN table 1: 51 integrations on 78 of 78 possible baselines. ! AN table 2: 14 integrations on 66 of 66 possible baselines. ! AN table 3: 12 integrations on 55 of 55 possible baselines. ! AN table 4: 3 integrations on 6 of 6 possible baselines. ! AN table 5: 6 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.306802 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0102+5824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 6892 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 425 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! A total of 66 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 425 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! A total of 66 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 461 telescope corrections were flagged in sub-array 1. ! A total of 110 telescope corrections were flagged in sub-array 2. ! A total of 68 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 461 telescope corrections were flagged in sub-array 1. ! A total of 110 telescope corrections were flagged in sub-array 2. ! A total of 68 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.844658Jy sigma=21.043656 ! Fit after self-cal, rms=0.694337Jy sigma=7.883893 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.04% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.5875 mas, bmaj=0.7722 mas, bpa=38.49 degrees ! Estimated noise=1.12307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.02926 Jy ! Component: 100 - total flux cleaned = 1.35175 Jy ! Total flux subtracted in 100 components = 1.35175 Jy ! Clean residual min=-0.041672 max=0.154304 Jy/beam ! Clean residual mean=-0.000273 rms=0.008756 Jy/beam ! Combined flux in latest and established models = 1.35175 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.35175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.493729Jy sigma=5.850540 ! Fit after self-cal, rms=0.492797Jy sigma=5.839081 ! Inverting map ! Your choice of large map pixels excluded 1.04% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.179882 Jy ! Component: 100 - total flux cleaned = 0.287009 Jy ! Total flux subtracted in 100 components = 0.287009 Jy ! Clean residual min=-0.033237 max=0.055045 Jy/beam ! Clean residual mean=-0.000280 rms=0.006777 Jy/beam ! Combined flux in latest and established models = 1.63876 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 1.63876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388592Jy sigma=4.988577 ! Fit after self-cal, rms=0.388393Jy sigma=4.986415 ! Inverting map ! Your choice of large map pixels excluded 1.04% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673548 Jy ! Component: 100 - total flux cleaned = 0.109794 Jy ! Total flux subtracted in 100 components = 0.109794 Jy ! Clean residual min=-0.030485 max=0.043936 Jy/beam ! Clean residual mean=-0.000282 rms=0.006485 Jy/beam ! Combined flux in latest and established models = 1.74856 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 1.74856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370080Jy sigma=4.916850 ! Fit after self-cal, rms=0.369859Jy sigma=4.914697 ! Inverting map ! Your choice of large map pixels excluded 1.04% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Added new window around map position (-1.2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442343 Jy ! Component: 100 - total flux cleaned = 0.0695087 Jy ! Total flux subtracted in 100 components = 0.0695087 Jy ! Clean residual min=-0.029191 max=0.033202 Jy/beam ! Clean residual mean=-0.000284 rms=0.006320 Jy/beam ! Combined flux in latest and established models = 1.81807 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 1.81807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363954Jy sigma=4.918535 ! Fit after self-cal, rms=0.363367Jy sigma=4.911776 ! Inverting map ! Your choice of large map pixels excluded 1.04% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.04% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.6855 mas, bmaj=0.8942 mas, bpa=33.09 degrees ! Estimated noise=0.92205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00553993 Jy ! Component: 100 - total flux cleaned = -0.00654021 Jy ! Component: 150 - total flux cleaned = -0.00694935 Jy ! Component: 200 - total flux cleaned = -0.0073255 Jy ! Total flux subtracted in 200 components = -0.0073255 Jy ! Clean residual min=-0.046636 max=0.050930 Jy/beam ! Clean residual mean=-0.003329 rms=0.012870 Jy/beam ! Combined flux in latest and established models = 1.81074 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 1.81074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362330Jy sigma=4.897749 ! Fit after self-cal, rms=0.362249Jy sigma=4.896738 ! Inverting map ! Your choice of large map pixels excluded 1.04% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6855 x 0.8942 at 33.09 degrees (North through East) ! Clean map min=-0.041756 max=1.3753 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.88 HN 1.02 KP 1.07 ! LA 0.99 MC 0.81 MK 0.97 NL 1.01 ! NY 0.73 ON 0.89 OV 0.94 PT 1.51 ! WN 1.45 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.22 HN 1.02 KP 1.14 ! LA 1.01 MC 0.83 NL 0.99 NY 0.73 ! ON 0.93 OV 0.98 SC 0.87 WZ 1.18 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.85 HN 1.03 KP 1.07 ! LA 0.99 MK 0.96 NL 1.06 NY 0.76 ! OV 0.97 PT 0.85 SC 1.22 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.73 ON 1.00 WN 1.62 WZ 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MK 0.84 SC 0.84 WN 1.69 WZ 1.07 ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.89 HN 1.03 KP 1.05 ! LA 0.99 MC 0.87 MK 0.97 NL 1.01 ! NY 0.86 ON 0.85 OV 0.94 PT 1.36 ! WN 1.44 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.30 HN 1.02 KP 1.13 ! LA 1.00 MC 0.88 NL 1.01 NY 0.87 ! ON 0.88 OV 0.98 SC 0.87 WZ 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.84 HN 1.00 KP 1.08 ! LA 1.00 MK 0.94 NL 1.05 NY 0.88 ! OV 0.97 PT 0.85 SC 1.26 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.89 ON 0.92 WN 1.58 WZ 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MK 0.82 SC 0.86 WN 1.76 WZ 1.02 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.86 HN 1.02 KP 1.05 ! LA 0.99 MC 1.29 MK 0.98 NL 1.00 ! NY 1.00* ON 1.12 OV 0.94 PT 1.35 ! WN 1.28 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.25 HN 1.01 KP 1.13 ! LA 1.01 MC 1.23 NL 1.00 NY 1.00* ! ON 1.20 OV 0.95 SC 0.86 WZ 1.20 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.84 HN 0.99 KP 1.07 ! LA 0.99 MK 0.95 NL 1.05 NY 1.00* ! OV 0.96 PT 0.84 SC 1.28 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* WN 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MK 0.87 SC 0.86 WN 1.58 WZ 1.02 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.86 HN 1.02 KP 1.07 ! LA 0.99 MC 1.24 MK 0.96 NL 1.01 ! NY 1.00* ON 1.04 OV 0.94 PT 1.35 ! WN 1.21 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.23 HN 1.01 KP 1.10 ! LA 1.02 MC 1.18 NL 1.00 NY 1.00* ! ON 1.17 OV 0.95 SC 0.87 WZ 1.22 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.84 HN 1.00 KP 1.07 ! LA 0.97 MK 0.93 NL 1.05 NY 1.00* ! OV 0.97 PT 0.84 SC 1.24 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* ON 0.00* WN 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MK 0.81 SC 0.86 WN 1.47 WZ 1.01 ! ! ! Fit before self-cal, rms=0.362249Jy sigma=4.896738 ! Fit after self-cal, rms=0.371475Jy sigma=3.864403 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.7049 mas, bmaj=0.9352 mas, bpa=33.29 degrees ! Estimated noise=0.951213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211609 Jy ! Component: 100 - total flux cleaned = 0.0237557 Jy ! Component: 150 - total flux cleaned = 0.024241 Jy ! Component: 200 - total flux cleaned = 0.0246638 Jy ! Total flux subtracted in 200 components = 0.0246638 Jy ! Clean residual min=-0.030660 max=0.031533 Jy/beam ! Clean residual mean=-0.000065 rms=0.008668 Jy/beam ! Combined flux in latest and established models = 1.8354 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 1.8354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367881Jy sigma=3.849309 ! Fit after self-cal, rms=0.367698Jy sigma=3.845542 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367698Jy sigma=3.845542 ! Fit after self-cal, rms=0.434460Jy sigma=2.865798 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.7034 mas, bmaj=0.9361 mas, bpa=32.83 degrees ! Estimated noise=0.951821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183716 Jy ! Component: 100 - total flux cleaned = 0.00182732 Jy ! Component: 150 - total flux cleaned = 0.00156139 Jy ! Component: 200 - total flux cleaned = 0.00131845 Jy ! Total flux subtracted in 200 components = 0.00131845 Jy ! Clean residual min=-0.011545 max=0.010770 Jy/beam ! Clean residual mean=-0.000054 rms=0.002561 Jy/beam ! Combined flux in latest and established models = 1.83672 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 1.83672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434026Jy sigma=2.858061 ! Fit after self-cal, rms=0.434001Jy sigma=2.857041 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.50756e-05 Jy ! Component: 100 - total flux cleaned = 0.000205075 Jy ! Component: 150 - total flux cleaned = 0.000210302 Jy ! Component: 200 - total flux cleaned = 0.000208172 Jy ! Total flux subtracted in 200 components = 0.000208172 Jy ! Clean residual min=-0.011503 max=0.010661 Jy/beam ! Clean residual mean=-0.000055 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 1.83693 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 1.83693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.433763Jy sigma=2.852876 ! Fit after self-cal, rms=0.433722Jy sigma=2.852244 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.433722Jy sigma=2.852244 ! Fit after self-cal, rms=0.428683Jy sigma=2.773554 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.7048 mas, bmaj=0.9377 mas, bpa=32.73 degrees ! Estimated noise=0.953977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014143 Jy ! Component: 100 - total flux cleaned = 0.00118818 Jy ! Component: 150 - total flux cleaned = 0.000989239 Jy ! Component: 200 - total flux cleaned = 0.000801429 Jy ! Total flux subtracted in 200 components = 0.000801429 Jy ! Clean residual min=-0.009559 max=0.008536 Jy/beam ! Clean residual mean=-0.000048 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 1.83773 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 1.83773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428404Jy sigma=2.769365 ! Fit after self-cal, rms=0.428371Jy sigma=2.768808 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234439 Jy ! Component: 100 - total flux cleaned = -7.01592e-05 Jy ! Component: 150 - total flux cleaned = -7.06403e-05 Jy ! Component: 200 - total flux cleaned = 7.31831e-05 Jy ! Total flux subtracted in 200 components = 7.31831e-05 Jy ! Clean residual min=-0.009445 max=0.008505 Jy/beam ! Clean residual mean=-0.000048 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 1.83781 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 1.83781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428227Jy sigma=2.766508 ! Fit after self-cal, rms=0.428198Jy sigma=2.766060 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428198Jy sigma=2.766060 ! Fit after self-cal, rms=0.428459Jy sigma=2.765002 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=2.623 mas, bmaj=2.729 mas, bpa=80.42 degrees ! Estimated noise=1.38895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210201 Jy ! Component: 100 - total flux cleaned = 0.00210844 Jy ! Component: 150 - total flux cleaned = 0.00221915 Jy ! Component: 200 - total flux cleaned = 0.00228855 Jy ! Total flux subtracted in 200 components = 0.00228855 Jy ! Clean residual min=-0.013894 max=0.014332 Jy/beam ! Clean residual mean=-0.000105 rms=0.003442 Jy/beam ! Combined flux in latest and established models = 1.84009 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 1.84009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428395Jy sigma=2.764545 ! Fit after self-cal, rms=0.428355Jy sigma=2.763734 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27.4, 41.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106496 Jy ! Component: 100 - total flux cleaned = 0.0141581 Jy ! Component: 150 - total flux cleaned = 0.0173898 Jy ! Component: 200 - total flux cleaned = 0.0192277 Jy ! Total flux subtracted in 200 components = 0.0192277 Jy ! Clean residual min=-0.013898 max=0.013814 Jy/beam ! Clean residual mean=-0.000179 rms=0.003271 Jy/beam ! Combined flux in latest and established models = 1.85932 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 72 components and 1.85932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428052Jy sigma=2.762028 ! Fit after self-cal, rms=0.428037Jy sigma=2.761554 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.7065 mas, bmaj=0.9387 mas, bpa=32.74 degrees ! Estimated noise=0.956438 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7065 x 0.9387 at 32.74 degrees (North through East) ! Clean map min=-0.0083313 max=1.4039 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428037Jy sigma=2.761554 ! Fit after self-cal, rms=1.281325Jy sigma=0.841163 ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.7071 mas, bmaj=0.9383 mas, bpa=32.77 degrees ! Estimated noise=0.954241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00491961 Jy ! Component: 100 - total flux cleaned = -0.00589711 Jy ! Component: 150 - total flux cleaned = -0.00624949 Jy ! Component: 200 - total flux cleaned = -0.00625621 Jy ! Total flux subtracted in 200 components = -0.00625621 Jy ! Clean residual min=-0.006451 max=0.007011 Jy/beam ! Clean residual mean=-0.000032 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 1.85307 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 1.85307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.281327Jy sigma=0.831569 ! Fit after self-cal, rms=1.281331Jy sigma=0.831017 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Added new window around map position (-0.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004321 Jy ! Component: 100 - total flux cleaned = 2.89634e-05 Jy ! Component: 150 - total flux cleaned = -0.00047233 Jy ! Component: 200 - total flux cleaned = -1.12269e-05 Jy ! Total flux subtracted in 200 components = -1.12269e-05 Jy ! Clean residual min=-0.004759 max=0.005284 Jy/beam ! Clean residual mean=-0.000032 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 1.85305 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 1.85305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.281380Jy sigma=0.818247 ! Fit after self-cal, rms=1.281362Jy sigma=0.815738 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Added new window around map position (-2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264035 Jy ! Component: 100 - total flux cleaned = 0.00334359 Jy ! Component: 150 - total flux cleaned = 0.0036461 Jy ! Component: 200 - total flux cleaned = 0.00378943 Jy ! Total flux subtracted in 200 components = 0.00378943 Jy ! Clean residual min=-0.004708 max=0.004074 Jy/beam ! Clean residual mean=-0.000034 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 1.85684 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 102 components and 1.85684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.281421Jy sigma=0.807555 ! Fit after self-cal, rms=1.281428Jy sigma=0.806655 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.281428Jy sigma=0.806655 ! Fit after self-cal, rms=1.299041Jy sigma=0.801659 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.609 mas, bmaj=0.8052 mas, bpa=38.51 degrees ! Estimated noise=1.16926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0652 Jy ! Component: 100 - total flux cleaned = 1.37177 Jy ! Component: 150 - total flux cleaned = 1.53122 Jy ! Component: 200 - total flux cleaned = 1.62825 Jy ! Total flux subtracted in 200 components = 1.62825 Jy ! Clean residual min=-0.010013 max=0.050819 Jy/beam ! Clean residual mean=-0.000016 rms=0.002655 Jy/beam ! Combined flux in latest and established models = 1.62825 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.62825 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.7088 mas, bmaj=0.94 mas, bpa=32.94 degrees ! Estimated noise=0.954166 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.09132 Jy ! Component: 100 - total flux cleaned = 0.142407 Jy ! Component: 150 - total flux cleaned = 0.171856 Jy ! Component: 200 - total flux cleaned = 0.189307 Jy ! Total flux subtracted in 200 components = 0.189307 Jy ! Clean residual min=-0.004593 max=0.008994 Jy/beam ! Clean residual mean=-0.000012 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 1.81755 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 43 components and 1.81755 Jy ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109399 Jy ! Component: 100 - total flux cleaned = 0.0179458 Jy ! Component: 150 - total flux cleaned = 0.0210903 Jy ! Component: 200 - total flux cleaned = 0.0229545 Jy ! Total flux subtracted in 200 components = 0.0229545 Jy ! Clean residual min=-0.005611 max=0.004574 Jy/beam ! Clean residual mean=-0.000026 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 1.84051 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 58 components and 1.84051 Jy ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=2.617 mas, bmaj=2.724 mas, bpa=81.29 degrees ! Estimated noise=1.38236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561674 Jy ! Component: 100 - total flux cleaned = 0.00867586 Jy ! Component: 150 - total flux cleaned = 0.0102282 Jy ! Component: 200 - total flux cleaned = 0.0116415 Jy ! Total flux subtracted in 200 components = 0.0116415 Jy ! Clean residual min=-0.005204 max=0.004878 Jy/beam ! Clean residual mean=-0.000112 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 1.85215 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899807 Jy ! Component: 100 - total flux cleaned = 0.00155501 Jy ! Component: 150 - total flux cleaned = 0.00215082 Jy ! Component: 200 - total flux cleaned = 0.00257488 Jy ! Total flux subtracted in 200 components = 0.00257488 Jy ! Clean residual min=-0.005154 max=0.004895 Jy/beam ! Clean residual mean=-0.000121 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 1.85473 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 108 components and 1.85473 Jy ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! Estimated beam: bmin=0.7088 mas, bmaj=0.94 mas, bpa=32.94 degrees ! Estimated noise=0.954166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.62785e-05 Jy ! Component: 100 - total flux cleaned = 0.000530118 Jy ! Component: 150 - total flux cleaned = 0.00118651 Jy ! Component: 200 - total flux cleaned = 0.00179842 Jy ! Total flux subtracted in 200 components = 0.00179842 Jy ! Clean residual min=-0.005363 max=0.004219 Jy/beam ! Clean residual mean=-0.000043 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 1.85652 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 112 components and 1.85652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.299954Jy sigma=0.832102 ! Fit after self-cal, rms=1.299778Jy sigma=0.821707 wmodel J0102+5824_X_map.mod ! Writing 112 model components to file: J0102+5824_X_map.mod wobs J0102+5824_X_uvs.fits ! Writing UV FITS file: J0102+5824_X_uvs.fits wwins J0102+5824_X_map.win ! wwins: Wrote 5 windows to J0102+5824_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135115 Jy ! Component: 100 - total flux cleaned = -0.00173261 Jy ! Component: 150 - total flux cleaned = -0.0021739 Jy ! Component: 200 - total flux cleaned = -0.00253193 Jy ! Component: 250 - total flux cleaned = -0.00274088 Jy ! Component: 300 - total flux cleaned = -0.00308344 Jy ! Component: 350 - total flux cleaned = -0.00362267 Jy ! Component: 400 - total flux cleaned = -0.00408809 Jy ! Component: 450 - total flux cleaned = -0.00461268 Jy ! Component: 500 - total flux cleaned = -0.00487139 Jy ! Component: 550 - total flux cleaned = -0.00531843 Jy ! Component: 600 - total flux cleaned = -0.00563432 Jy ! Component: 650 - total flux cleaned = -0.00600901 Jy ! Component: 700 - total flux cleaned = -0.00662669 Jy ! Component: 750 - total flux cleaned = -0.00699279 Jy ! Component: 800 - total flux cleaned = -0.00717406 Jy ! Component: 850 - total flux cleaned = -0.0075953 Jy ! Component: 900 - total flux cleaned = -0.00789352 Jy ! Component: 950 - total flux cleaned = -0.00830773 Jy ! Component: 1000 - total flux cleaned = -0.00854284 Jy ! Component: 1050 - total flux cleaned = -0.00895126 Jy ! Component: 1100 - total flux cleaned = -0.00941387 Jy ! Component: 1150 - total flux cleaned = -0.00947124 Jy ! Component: 1200 - total flux cleaned = -0.00992791 Jy ! Component: 1250 - total flux cleaned = -0.0100417 Jy ! Component: 1300 - total flux cleaned = -0.0103235 Jy ! Component: 1350 - total flux cleaned = -0.0106598 Jy ! Component: 1400 - total flux cleaned = -0.0109941 Jy ! Component: 1450 - total flux cleaned = -0.0113259 Jy ! Component: 1500 - total flux cleaned = -0.0115455 Jy ! Component: 1550 - total flux cleaned = -0.0118189 Jy ! Component: 1600 - total flux cleaned = -0.0119274 Jy ! Component: 1650 - total flux cleaned = -0.0121438 Jy ! Component: 1700 - total flux cleaned = -0.0123045 Jy ! Component: 1750 - total flux cleaned = -0.012412 Jy ! Component: 1800 - total flux cleaned = -0.0125717 Jy ! Component: 1850 - total flux cleaned = -0.0128894 Jy ! Component: 1900 - total flux cleaned = -0.0130478 Jy ! Component: 1950 - total flux cleaned = -0.0132579 Jy ! Component: 2000 - total flux cleaned = -0.013519 Jy ! Component: 2050 - total flux cleaned = -0.0139348 Jy ! Component: 2100 - total flux cleaned = -0.0141417 Jy ! Component: 2150 - total flux cleaned = -0.0142446 Jy ! Component: 2200 - total flux cleaned = -0.0146037 Jy ! Component: 2250 - total flux cleaned = -0.0146548 Jy ! Component: 2300 - total flux cleaned = -0.0148074 Jy ! Component: 2350 - total flux cleaned = -0.01501 Jy ! Component: 2400 - total flux cleaned = -0.0151611 Jy ! Component: 2450 - total flux cleaned = -0.0154121 Jy ! Component: 2500 - total flux cleaned = -0.0155623 Jy ! Component: 2550 - total flux cleaned = -0.0158116 Jy ! Component: 2600 - total flux cleaned = -0.0159109 Jy ! Component: 2650 - total flux cleaned = -0.0160098 Jy ! Component: 2700 - total flux cleaned = -0.0161578 Jy ! Component: 2750 - total flux cleaned = -0.0164519 Jy ! Component: 2800 - total flux cleaned = -0.0165498 Jy ! Component: 2850 - total flux cleaned = -0.0167445 Jy ! Component: 2900 - total flux cleaned = -0.0169387 Jy ! Component: 2950 - total flux cleaned = -0.017035 Jy ! Component: 3000 - total flux cleaned = -0.017035 Jy ! Component: 3050 - total flux cleaned = -0.0173227 Jy ! Component: 3100 - total flux cleaned = -0.0176096 Jy ! Component: 3150 - total flux cleaned = -0.0176094 Jy ! Component: 3200 - total flux cleaned = -0.0175617 Jy ! Component: 3250 - total flux cleaned = -0.0179398 Jy ! Component: 3300 - total flux cleaned = -0.0179867 Jy ! Component: 3350 - total flux cleaned = -0.0180809 Jy ! Component: 3400 - total flux cleaned = -0.0180811 Jy ! Component: 3450 - total flux cleaned = -0.018361 Jy ! Component: 3500 - total flux cleaned = -0.018454 Jy ! Component: 3550 - total flux cleaned = -0.0186393 Jy ! Component: 3600 - total flux cleaned = -0.0187316 Jy ! Component: 3650 - total flux cleaned = -0.0188696 Jy ! Component: 3700 - total flux cleaned = -0.0189155 Jy ! Component: 3750 - total flux cleaned = -0.0190981 Jy ! Component: 3800 - total flux cleaned = -0.0193256 Jy ! Component: 3850 - total flux cleaned = -0.0191893 Jy ! Component: 3900 - total flux cleaned = -0.0194156 Jy ! Component: 3950 - total flux cleaned = -0.0192801 Jy ! Component: 4000 - total flux cleaned = -0.0195498 Jy ! Component: 4050 - total flux cleaned = -0.0198188 Jy ! Total flux subtracted in 4096 components = -0.0199527 Jy ! Clean residual min=-0.002628 max=0.002365 Jy/beam ! Clean residual mean=-0.000024 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 1.83657 Jy keep ! Adding 373 model components to the UV plane model. ! The established model now contains 482 components and 1.83657 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J0102+5824_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7088 x 0.94 at 32.94 degrees (North through East) ! Clean map min=-0.0031546 max=1.4013 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J0102+5824_X_map.fits wmodel /scr/pima/rv123_uvs/J0102+5824_X_map.mod ! Writing 482 model components to file: /scr/pima/rv123_uvs/J0102+5824_X_map.mod wobs /scr/pima/rv123_uvs/J0102+5824_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J0102+5824_X_uvs.fits wwins /scr/pima/rv123_uvs/J0102+5824_X_map.win ! wwins: Wrote 6 windows to /scr/pima/rv123_uvs/J0102+5824_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.4013 invert ! Inverting map ! Your choice of large map pixels excluded 0.561% of the data. ! The y-axis pixel size should ideally be below 0.1714 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000734192 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.157181 0.157181 0.314362 0.628724 1.25745 2.51489 5.02979 10.0596 20.1192 40.2383 80.4766 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.401 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1908.63 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J0102+5824_X_dfm.log closed on Sun Dec 23 00:39:10 2018