! Started logfile: /scr/pima/rv122_uvs/J2056-4714_S_dfm.log on Fri Jul 13 21:11:17 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv122_uvs/J2056-4714_S_uva.fits
! Reading UV FITS file: /scr/pima/rv122_uvs/J2056-4714_S_uva.fits
! AN table 1: 4 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.875 visibilities/baseline/integration-bin.
! Found source: J2056-4714
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 84 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2056-4714_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.450216Jy  sigma=20.983915
! Fit after  self-cal, rms=1.048143Jy  sigma=8.799172
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.51 mas, bmaj=69.42 mas, bpa=9.599 degrees
! Estimated noise=14.5199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.40022 Jy
! Component: 100  -  total flux cleaned = 1.72032 Jy
! Total flux subtracted in 100 components = 1.72032 Jy
! Clean residual min=-0.089644 max=0.118171 Jy/beam
! Clean residual mean=-0.001416 rms=0.047082 Jy/beam
! Combined flux in latest and established models = 1.72032 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.72032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.391248Jy  sigma=3.217326
! Fit after  self-cal, rms=0.391270Jy  sigma=3.217096
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.579 mas, bmaj=55.08 mas, bpa=9.038 degrees
! Estimated noise=11.3793 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.288246 Jy
! Component: 100  -  total flux cleaned = 0.379046 Jy
! Component: 150  -  total flux cleaned = 0.372645 Jy
! Component: 200  -  total flux cleaned = 0.366679 Jy
! Total flux subtracted in 200 components = 0.366679 Jy
! Clean residual min=-0.032318 max=0.033198 Jy/beam
! Clean residual mean=0.000016 rms=0.011237 Jy/beam
! Combined flux in latest and established models = 2.087 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 76 components and 2.087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077456Jy  sigma=0.646884
! Fit after  self-cal, rms=0.075142Jy  sigma=0.619870
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.579 x 55.08 at 9.038 degrees (North through East)
! Clean map  min=-0.034151  max=1.677 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.98     LA        0.99     PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.01     LA        1.00     PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00     LA        0.99     PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.075142Jy  sigma=0.619870
! Fit after  self-cal, rms=0.065227Jy  sigma=0.548727
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=59.07 mas, bpa=9.215 degrees
! Estimated noise=13.5148 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132668 Jy
! Component: 100  -  total flux cleaned = 0.000258203 Jy
! Component: 150  -  total flux cleaned = 0.00132834 Jy
! Component: 200  -  total flux cleaned = 0.0017954 Jy
! Total flux subtracted in 200 components = 0.0017954 Jy
! Clean residual min=-0.003762 max=0.003772 Jy/beam
! Clean residual mean=0.000009 rms=0.001396 Jy/beam
! Combined flux in latest and established models = 2.08879 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 129 components and 2.08879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059921Jy  sigma=0.503654
! Fit after  self-cal, rms=0.059564Jy  sigma=0.501695
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059564Jy  sigma=0.501695
! Fit after  self-cal, rms=0.059392Jy  sigma=0.499828
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.968 mas, bmaj=59.07 mas, bpa=9.216 degrees
! Estimated noise=13.5038 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127625 Jy
! Component: 100  -  total flux cleaned = 0.0020745 Jy
! Component: 150  -  total flux cleaned = 0.0031035 Jy
! Component: 200  -  total flux cleaned = 0.00427267 Jy
! Total flux subtracted in 200 components = 0.00427267 Jy
! Clean residual min=-0.002848 max=0.002865 Jy/beam
! Clean residual mean=-0.000019 rms=0.001082 Jy/beam
! Combined flux in latest and established models = 2.09307 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 174 components and 2.09307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058129Jy  sigma=0.492029
! Fit after  self-cal, rms=0.058219Jy  sigma=0.491254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.94255e-05 Jy
! Component: 100  -  total flux cleaned = -0.000286256 Jy
! Component: 150  -  total flux cleaned = -0.000727878 Jy
! Component: 200  -  total flux cleaned = -0.00103125 Jy
! Total flux subtracted in 200 components = -0.00103125 Jy
! Clean residual min=-0.002687 max=0.002628 Jy/beam
! Clean residual mean=0.000020 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 2.09204 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 225 components and 2.09204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057434Jy  sigma=0.486960
! Fit after  self-cal, rms=0.057539Jy  sigma=0.486367
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057539Jy  sigma=0.486367
! Fit after  self-cal, rms=0.057492Jy  sigma=0.486116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.968 mas, bmaj=59.08 mas, bpa=9.215 degrees
! Estimated noise=13.5051 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000430016 Jy
! Component: 100  -  total flux cleaned = 0.000141132 Jy
! Component: 150  -  total flux cleaned = 0.000306074 Jy
! Component: 200  -  total flux cleaned = 0.000683144 Jy
! Total flux subtracted in 200 components = 0.000683144 Jy
! Clean residual min=-0.003396 max=0.003221 Jy/beam
! Clean residual mean=-0.000010 rms=0.001136 Jy/beam
! Combined flux in latest and established models = 2.09272 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 248 components and 2.09272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056782Jy  sigma=0.483287
! Fit after  self-cal, rms=0.056895Jy  sigma=0.482568
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123046 Jy
! Component: 100  -  total flux cleaned = 0.00302828 Jy
! Component: 150  -  total flux cleaned = 0.00285327 Jy
! Component: 200  -  total flux cleaned = 0.00247274 Jy
! Total flux subtracted in 200 components = 0.00247274 Jy
! Clean residual min=-0.003407 max=0.003351 Jy/beam
! Clean residual mean=0.000015 rms=0.001205 Jy/beam
! Combined flux in latest and established models = 2.09519 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 277 components and 2.09519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056267Jy  sigma=0.479914
! Fit after  self-cal, rms=0.056309Jy  sigma=0.478917
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056309Jy  sigma=0.478917
! Fit after  self-cal, rms=0.056270Jy  sigma=0.478462
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.06 mas, bmaj=51.48 mas, bpa=5.268 degrees
! Estimated noise=19.4272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234361 Jy
! Component: 100  -  total flux cleaned = -0.00102068 Jy
! Component: 150  -  total flux cleaned = -0.00162275 Jy
! Component: 200  -  total flux cleaned = -0.000556795 Jy
! Total flux subtracted in 200 components = -0.000556795 Jy
! Clean residual min=-0.003710 max=0.003826 Jy/beam
! Clean residual mean=0.000019 rms=0.001639 Jy/beam
! Combined flux in latest and established models = 2.09464 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 335 components and 2.09464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055432Jy  sigma=0.475676
! Fit after  self-cal, rms=0.055527Jy  sigma=0.474826
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122611 Jy
! Component: 100  -  total flux cleaned = 0.00218059 Jy
! Component: 150  -  total flux cleaned = 0.00257541 Jy
! Component: 200  -  total flux cleaned = 0.00302521 Jy
! Total flux subtracted in 200 components = 0.00302521 Jy
! Clean residual min=-0.003973 max=0.003892 Jy/beam
! Clean residual mean=0.000006 rms=0.001646 Jy/beam
! Combined flux in latest and established models = 2.09766 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 367 components and 2.09766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054920Jy  sigma=0.472526
! Fit after  self-cal, rms=0.054947Jy  sigma=0.471388
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=59.08 mas, bpa=9.214 degrees
! Estimated noise=13.508 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.969 x 59.08 at 9.214 degrees (North through East)
! Clean map  min=-0.022191  max=1.6525 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054947Jy  sigma=0.471388
! Fit after  self-cal, rms=0.049740Jy  sigma=0.401821
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=59.07 mas, bpa=9.214 degrees
! Estimated noise=13.5142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00173887 Jy
! Component: 100  -  total flux cleaned = -0.00269989 Jy
! Component: 150  -  total flux cleaned = -0.00256741 Jy
! Component: 200  -  total flux cleaned = -0.00227632 Jy
! Total flux subtracted in 200 components = -0.00227632 Jy
! Clean residual min=-0.002601 max=0.002472 Jy/beam
! Clean residual mean=0.000001 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 2.09538 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 392 components and 2.09538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049228Jy  sigma=0.399661
! Fit after  self-cal, rms=0.049303Jy  sigma=0.399129
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000593182 Jy
! Component: 100  -  total flux cleaned = 0.00124549 Jy
! Component: 150  -  total flux cleaned = 0.00124069 Jy
! Component: 200  -  total flux cleaned = 0.000873546 Jy
! Total flux subtracted in 200 components = 0.000873546 Jy
! Clean residual min=-0.002217 max=0.002221 Jy/beam
! Clean residual mean=0.000015 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 2.09626 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 421 components and 2.09626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048888Jy  sigma=0.397103
! Fit after  self-cal, rms=0.048940Jy  sigma=0.396816
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048940Jy  sigma=0.396816
! Fit after  self-cal, rms=0.048917Jy  sigma=0.396594
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.514 mas, bmaj=68.91 mas, bpa=9.598 degrees
! Estimated noise=14.8747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.39582 Jy
! Component: 100  -  total flux cleaned = 1.71451 Jy
! Component: 150  -  total flux cleaned = 1.87161 Jy
! Component: 200  -  total flux cleaned = 1.91038 Jy
! Total flux subtracted in 200 components = 1.91038 Jy
! Clean residual min=-0.092092 max=0.095108 Jy/beam
! Clean residual mean=-0.000437 rms=0.028034 Jy/beam
! Combined flux in latest and established models = 1.91038 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 1.91038 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=59.08 mas, bpa=9.213 degrees
! Estimated noise=13.5136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0961802 Jy
! Component: 100  -  total flux cleaned = 0.102722 Jy
! Component: 150  -  total flux cleaned = 0.0969192 Jy
! Component: 200  -  total flux cleaned = 0.0942323 Jy
! Total flux subtracted in 200 components = 0.0942323 Jy
! Clean residual min=-0.055403 max=0.055540 Jy/beam
! Clean residual mean=-0.000017 rms=0.021218 Jy/beam
! Combined flux in latest and established models = 2.00461 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 73 components and 2.00461 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.06 mas, bmaj=51.48 mas, bpa=5.262 degrees
! Estimated noise=19.4265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0567403 Jy
! Component: 100  -  total flux cleaned = 0.0407144 Jy
! Component: 150  -  total flux cleaned = 0.0223323 Jy
! Component: 200  -  total flux cleaned = 0.0244369 Jy
! Total flux subtracted in 200 components = 0.0244369 Jy
! Clean residual min=-0.037360 max=0.037020 Jy/beam
! Clean residual mean=0.000879 rms=0.015684 Jy/beam
! Combined flux in latest and established models = 2.02905 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235201 Jy
! Component: 100  -  total flux cleaned = 0.000481232 Jy
! Component: 150  -  total flux cleaned = 0.000770973 Jy
! Component: 200  -  total flux cleaned = 0.00115605 Jy
! Total flux subtracted in 200 components = 0.00115605 Jy
! Clean residual min=-0.082375 max=0.083313 Jy/beam
! Clean residual mean=0.002140 rms=0.033733 Jy/beam
! Combined flux in latest and established models = 2.0302 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 139 components and 2.0302 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=59.08 mas, bpa=9.213 degrees
! Estimated noise=13.5136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754212 Jy
! Component: 100  -  total flux cleaned = 0.00087937 Jy
! Component: 150  -  total flux cleaned = 0.000700175 Jy
! Component: 200  -  total flux cleaned = -0.00270923 Jy
! Total flux subtracted in 200 components = -0.00270923 Jy
! Clean residual min=-0.064010 max=0.065162 Jy/beam
! Clean residual mean=-0.001252 rms=0.023086 Jy/beam
! Combined flux in latest and established models = 2.02749 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 157 components and 2.0275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122982Jy  sigma=1.078588
! Fit after  self-cal, rms=0.116231Jy  sigma=0.988800
wmodel J2056-4714_S_map.mod
! Writing 157 model components to file: J2056-4714_S_map.mod
wobs   J2056-4714_S_uvs.fits
! Writing UV FITS file: J2056-4714_S_uvs.fits
wwins  J2056-4714_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /scr/pima/rv122_uvs/J2056-4714_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.969 x 59.08 at 9.213 degrees (North through East)
! Clean map  min=-0.14401  max=1.4058 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv122_uvs/J2056-4714_S_map.fits
wmodel /scr/pima/rv122_uvs/J2056-4714_S_map.mod
! Writing 157 model components to file: /scr/pima/rv122_uvs/J2056-4714_S_map.mod
wobs   /scr/pima/rv122_uvs/J2056-4714_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv122_uvs/J2056-4714_S_uvs.fits
wwins  /scr/pima/rv122_uvs/J2056-4714_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.40581 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0264225 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.63855 5.63855 11.2771 22.5542 45.1084 90.2168
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0792 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.405 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  53.205 
quit
! Quitting program
! Log file /scr/pima/rv122_uvs/J2056-4714_S_dfm.log closed on Fri Jul 13 21:11:20 2018