! Started logfile: /scr/pima/rv122_uvs/J1725+1152_X_dfm.log on Fri Jul 13 21:10:00 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv122_uvs/J1725+1152_X_uva.fits
! Reading UV FITS file: /scr/pima/rv122_uvs/J1725+1152_X_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.873522 visibilities/baseline/integration-bin.
! Found source: J1725+1152
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 5912 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1725+1152_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003542Jy  sigma=19.689958
! Fit after  self-cal, rms=0.927074Jy  sigma=18.130146
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6656 mas, bmaj=1.615 mas, bpa=-2.268 degrees
! Estimated noise=0.895993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0568085 Jy
! Component: 100  -  total flux cleaned = 0.0692441 Jy
! Total flux subtracted in 100 components = 0.0692441 Jy
! Clean residual min=-0.003720 max=0.004207 Jy/beam
! Clean residual mean=-0.000001 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.0692441 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0692441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052240Jy  sigma=0.906667
! Fit after  self-cal, rms=0.052161Jy  sigma=0.905825
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8707 mas, bmaj=1.927 mas, bpa=-2.023 degrees
! Estimated noise=0.489567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00527779 Jy
! Component: 100  -  total flux cleaned = 0.0077735 Jy
! Component: 150  -  total flux cleaned = 0.00933437 Jy
! Component: 200  -  total flux cleaned = 0.0103523 Jy
! Total flux subtracted in 200 components = 0.0103523 Jy
! Clean residual min=-0.002895 max=0.002703 Jy/beam
! Clean residual mean=-0.000001 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.0795964 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 33 components and 0.0795965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051719Jy  sigma=0.893015
! Fit after  self-cal, rms=0.051738Jy  sigma=0.892919
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8707 x 1.927 at -2.023 degrees (North through East)
! Clean map  min=-0.0026514  max=0.074226 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        1.13     
!   LA        1.02     MK        1.01     OV        0.98     PT        0.88     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        1.11     KP        1.15     
!   LA        1.01     MK        0.96     OV        1.01     PT        0.89     
!   SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.14     
!   LA        1.04     MK        0.95     OV        0.93     PT        0.86     
!   SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.90     HN        1.13     KP        1.14     
!   LA        1.02     MK        1.00     OV        0.94     PT        0.91     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.051738Jy  sigma=0.892919
! Fit after  self-cal, rms=0.052271Jy  sigma=0.881263
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8721 mas, bmaj=1.933 mas, bpa=-2.165 degrees
! Estimated noise=0.488615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156615 Jy
! Component: 100  -  total flux cleaned = -0.000185464 Jy
! Component: 150  -  total flux cleaned = -0.000197988 Jy
! Component: 200  -  total flux cleaned = -0.000209659 Jy
! Total flux subtracted in 200 components = -0.000209659 Jy
! Clean residual min=-0.001648 max=0.001688 Jy/beam
! Clean residual mean=0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0793868 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 40 components and 0.0793868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052264Jy  sigma=0.881131
! Fit after  self-cal, rms=0.052348Jy  sigma=0.880804
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052348Jy  sigma=0.880804
! Fit after  self-cal, rms=0.052536Jy  sigma=0.878986
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8733 mas, bmaj=1.93 mas, bpa=-1.945 degrees
! Estimated noise=0.48859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115816 Jy
! Component: 100  -  total flux cleaned = -0.000116381 Jy
! Component: 150  -  total flux cleaned = -0.000128161 Jy
! Component: 200  -  total flux cleaned = -0.000148238 Jy
! Total flux subtracted in 200 components = -0.000148238 Jy
! Clean residual min=-0.001588 max=0.001564 Jy/beam
! Clean residual mean=0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0792386 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 43 components and 0.0792386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052527Jy  sigma=0.878888
! Fit after  self-cal, rms=0.052538Jy  sigma=0.878830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101522 Jy
! Component: 100  -  total flux cleaned = -0.000111129 Jy
! Component: 150  -  total flux cleaned = -0.000119653 Jy
! Component: 200  -  total flux cleaned = -0.000119915 Jy
! Total flux subtracted in 200 components = -0.000119915 Jy
! Clean residual min=-0.001608 max=0.001578 Jy/beam
! Clean residual mean=0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.0791186 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 44 components and 0.0791186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052533Jy  sigma=0.878785
! Fit after  self-cal, rms=0.052531Jy  sigma=0.878776
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052531Jy  sigma=0.878776
! Fit after  self-cal, rms=0.052632Jy  sigma=0.878755
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8734 mas, bmaj=1.928 mas, bpa=-1.931 degrees
! Estimated noise=0.488729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.37008e-05 Jy
! Component: 100  -  total flux cleaned = -4.38073e-05 Jy
! Component: 150  -  total flux cleaned = -5.21132e-05 Jy
! Component: 200  -  total flux cleaned = -6.69908e-05 Jy
! Total flux subtracted in 200 components = -6.69908e-05 Jy
! Clean residual min=-0.001610 max=0.001579 Jy/beam
! Clean residual mean=0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.0790517 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 44 components and 0.0790517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052627Jy  sigma=0.878710
! Fit after  self-cal, rms=0.052628Jy  sigma=0.878702
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.1241e-05 Jy
! Component: 100  -  total flux cleaned = -6.83029e-05 Jy
! Component: 150  -  total flux cleaned = -6.86513e-05 Jy
! Component: 200  -  total flux cleaned = -6.8888e-05 Jy
! Total flux subtracted in 200 components = -6.8888e-05 Jy
! Clean residual min=-0.001619 max=0.001586 Jy/beam
! Clean residual mean=0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.0789828 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 47 components and 0.0789828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052625Jy  sigma=0.878683
! Fit after  self-cal, rms=0.052624Jy  sigma=0.878678
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052624Jy  sigma=0.878678
! Fit after  self-cal, rms=0.052690Jy  sigma=0.878669
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=3.089 mas, bpa=7.996 degrees
! Estimated noise=0.601889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205574 Jy
! Component: 100  -  total flux cleaned = 0.000205442 Jy
! Component: 150  -  total flux cleaned = 0.000205311 Jy
! Component: 200  -  total flux cleaned = 0.000205278 Jy
! Total flux subtracted in 200 components = 0.000205278 Jy
! Clean residual min=-0.001764 max=0.001796 Jy/beam
! Clean residual mean=0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.079188 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 48 components and 0.079188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052696Jy  sigma=0.878757
! Fit after  self-cal, rms=0.052699Jy  sigma=0.878740
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.38391e-05 Jy
! Component: 100  -  total flux cleaned = 2.39332e-05 Jy
! Component: 150  -  total flux cleaned = 1.8808e-05 Jy
! Component: 200  -  total flux cleaned = 1.07407e-05 Jy
! Total flux subtracted in 200 components = 1.07407e-05 Jy
! Clean residual min=-0.001764 max=0.001777 Jy/beam
! Clean residual mean=0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0791988 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 50 components and 0.0791988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052703Jy  sigma=0.878813
! Fit after  self-cal, rms=0.052704Jy  sigma=0.878804
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8734 mas, bmaj=1.927 mas, bpa=-1.934 degrees
! Estimated noise=0.488911 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8734 x 1.927 at -1.934 degrees (North through East)
! Clean map  min=-0.0014621  max=0.074102 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6669 mas, bmaj=1.61 mas, bpa=-2.036 degrees
! Estimated noise=0.894911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0566745 Jy
! Component: 100  -  total flux cleaned = 0.0690935 Jy
! Component: 150  -  total flux cleaned = 0.0731048 Jy
! Component: 200  -  total flux cleaned = 0.0752851 Jy
! Total flux subtracted in 200 components = 0.0752851 Jy
! Clean residual min=-0.003060 max=0.002909 Jy/beam
! Clean residual mean=-0.000000 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.0752851 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0752851 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8734 mas, bmaj=1.927 mas, bpa=-1.934 degrees
! Estimated noise=0.488911 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209387 Jy
! Component: 100  -  total flux cleaned = 0.00298547 Jy
! Component: 150  -  total flux cleaned = 0.00340212 Jy
! Component: 200  -  total flux cleaned = 0.00348488 Jy
! Total flux subtracted in 200 components = 0.00348488 Jy
! Clean residual min=-0.001621 max=0.001544 Jy/beam
! Clean residual mean=0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.07877 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.07877 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=3.089 mas, bpa=7.996 degrees
! Estimated noise=0.601889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449317 Jy
! Component: 100  -  total flux cleaned = 0.000449924 Jy
! Component: 150  -  total flux cleaned = 0.000438277 Jy
! Component: 200  -  total flux cleaned = 0.000428082 Jy
! Total flux subtracted in 200 components = 0.000428082 Jy
! Clean residual min=-0.001771 max=0.001782 Jy/beam
! Clean residual mean=0.000002 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.0791981 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.0292e-06 Jy
! Component: 100  -  total flux cleaned = -1.29534e-05 Jy
! Component: 150  -  total flux cleaned = -2.03418e-05 Jy
! Component: 200  -  total flux cleaned = -2.01742e-05 Jy
! Total flux subtracted in 200 components = -2.01742e-05 Jy
! Clean residual min=-0.001778 max=0.001781 Jy/beam
! Clean residual mean=0.000002 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.0791779 Jy
! Adding 7 model components to the UV plane model.
! The established model now contains 36 components and 0.0791779 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8734 mas, bmaj=1.927 mas, bpa=-1.934 degrees
! Estimated noise=0.488911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000435663 Jy
! Component: 100  -  total flux cleaned = -0.000418929 Jy
! Component: 150  -  total flux cleaned = -0.000371954 Jy
! Component: 200  -  total flux cleaned = -0.000361451 Jy
! Total flux subtracted in 200 components = -0.000361451 Jy
! Clean residual min=-0.001637 max=0.001547 Jy/beam
! Clean residual mean=0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.0788165 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 37 components and 0.0788165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052707Jy  sigma=0.878821
! Fit after  self-cal, rms=0.052703Jy  sigma=0.878803
wmodel J1725+1152_X_map.mod
! Writing 37 model components to file: J1725+1152_X_map.mod
wobs   J1725+1152_X_uvs.fits
! Writing UV FITS file: J1725+1152_X_uvs.fits
wwins  J1725+1152_X_map.win
! wwins: Wrote 1 windows to J1725+1152_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000213627 Jy
! Component: 100  -  total flux cleaned = -0.00024216 Jy
! Component: 150  -  total flux cleaned = -0.000136606 Jy
! Component: 200  -  total flux cleaned = -0.00013702 Jy
! Component: 250  -  total flux cleaned = -0.000136861 Jy
! Component: 300  -  total flux cleaned = -6.38109e-05 Jy
! Component: 350  -  total flux cleaned = 3.12649e-05 Jy
! Component: 400  -  total flux cleaned = 0.00014726 Jy
! Component: 450  -  total flux cleaned = 0.000261486 Jy
! Component: 500  -  total flux cleaned = 0.000373743 Jy
! Component: 550  -  total flux cleaned = 0.000483775 Jy
! Component: 600  -  total flux cleaned = 0.00044022 Jy
! Component: 650  -  total flux cleaned = 0.000525782 Jy
! Component: 700  -  total flux cleaned = 0.000525872 Jy
! Component: 750  -  total flux cleaned = 0.000505237 Jy
! Component: 800  -  total flux cleaned = 0.00060755 Jy
! Component: 850  -  total flux cleaned = 0.000566678 Jy
! Component: 900  -  total flux cleaned = 0.000566586 Jy
! Component: 950  -  total flux cleaned = 0.000586107 Jy
! Component: 1000  -  total flux cleaned = 0.000585997 Jy
! Component: 1050  -  total flux cleaned = 0.000566611 Jy
! Component: 1100  -  total flux cleaned = 0.000509859 Jy
! Component: 1150  -  total flux cleaned = 0.000547061 Jy
! Component: 1200  -  total flux cleaned = 0.000546822 Jy
! Component: 1250  -  total flux cleaned = 0.000528319 Jy
! Component: 1300  -  total flux cleaned = 0.000510247 Jy
! Component: 1350  -  total flux cleaned = 0.000581242 Jy
! Component: 1400  -  total flux cleaned = 0.000475206 Jy
! Component: 1450  -  total flux cleaned = 0.000492675 Jy
! Component: 1500  -  total flux cleaned = 0.000458309 Jy
! Component: 1550  -  total flux cleaned = 0.000475215 Jy
! Component: 1600  -  total flux cleaned = 0.000424263 Jy
! Component: 1650  -  total flux cleaned = 0.000457901 Jy
! Component: 1700  -  total flux cleaned = 0.000408006 Jy
! Component: 1750  -  total flux cleaned = 0.000441002 Jy
! Component: 1800  -  total flux cleaned = 0.000441284 Jy
! Component: 1850  -  total flux cleaned = 0.000489797 Jy
! Component: 1900  -  total flux cleaned = 0.000505751 Jy
! Component: 1950  -  total flux cleaned = 0.000569514 Jy
! Component: 2000  -  total flux cleaned = 0.000601039 Jy
! Component: 2050  -  total flux cleaned = 0.000585407 Jy
! Component: 2100  -  total flux cleaned = 0.000709181 Jy
! Component: 2150  -  total flux cleaned = 0.000678382 Jy
! Component: 2200  -  total flux cleaned = 0.000678236 Jy
! Component: 2250  -  total flux cleaned = 0.000662989 Jy
! Component: 2300  -  total flux cleaned = 0.00069328 Jy
! Component: 2350  -  total flux cleaned = 0.000723083 Jy
! Component: 2400  -  total flux cleaned = 0.000678738 Jy
! Component: 2450  -  total flux cleaned = 0.000810812 Jy
! Component: 2500  -  total flux cleaned = 0.000781515 Jy
! Component: 2550  -  total flux cleaned = 0.000825062 Jy
! Component: 2600  -  total flux cleaned = 0.000825155 Jy
! Component: 2650  -  total flux cleaned = 0.000882297 Jy
! Component: 2700  -  total flux cleaned = 0.000853997 Jy
! Component: 2750  -  total flux cleaned = 0.000882182 Jy
! Component: 2800  -  total flux cleaned = 0.000881978 Jy
! Component: 2850  -  total flux cleaned = 0.00089592 Jy
! Component: 2900  -  total flux cleaned = 0.0008407 Jy
! Component: 2950  -  total flux cleaned = 0.000854519 Jy
! Component: 3000  -  total flux cleaned = 0.000909175 Jy
! Component: 3050  -  total flux cleaned = 0.000909243 Jy
! Component: 3100  -  total flux cleaned = 0.000855351 Jy
! Component: 3150  -  total flux cleaned = 0.000828684 Jy
! Component: 3200  -  total flux cleaned = 0.00084206 Jy
! Component: 3250  -  total flux cleaned = 0.000815429 Jy
! Component: 3300  -  total flux cleaned = 0.000815484 Jy
! Component: 3350  -  total flux cleaned = 0.000802504 Jy
! Component: 3400  -  total flux cleaned = 0.000776624 Jy
! Component: 3450  -  total flux cleaned = 0.000776643 Jy
! Component: 3500  -  total flux cleaned = 0.000725227 Jy
! Component: 3550  -  total flux cleaned = 0.000738069 Jy
! Component: 3600  -  total flux cleaned = 0.000750682 Jy
! Component: 3650  -  total flux cleaned = 0.000687477 Jy
! Component: 3700  -  total flux cleaned = 0.000649805 Jy
! Component: 3750  -  total flux cleaned = 0.000574861 Jy
! Component: 3800  -  total flux cleaned = 0.000537698 Jy
! Component: 3850  -  total flux cleaned = 0.000488211 Jy
! Component: 3900  -  total flux cleaned = 0.000562072 Jy
! Component: 3950  -  total flux cleaned = 0.000488597 Jy
! Component: 4000  -  total flux cleaned = 0.000452121 Jy
! Component: 4050  -  total flux cleaned = 0.000367427 Jy
! Total flux subtracted in 4096 components = 0.000391566 Jy
! Clean residual min=-0.000691 max=0.000797 Jy/beam
! Clean residual mean=-0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.079208 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 324 components and 0.0792081 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv122_uvs/J1725+1152_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8734 x 1.927 at -1.934 degrees (North through East)
! Clean map  min=-0.0013567  max=0.074295 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv122_uvs/J1725+1152_X_map.fits
wmodel /scr/pima/rv122_uvs/J1725+1152_X_map.mod
! Writing 324 model components to file: /scr/pima/rv122_uvs/J1725+1152_X_map.mod
wobs   /scr/pima/rv122_uvs/J1725+1152_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv122_uvs/J1725+1152_X_uvs.fits
wwins  /scr/pima/rv122_uvs/J1725+1152_X_map.win
! wwins: Wrote 2 windows to /scr/pima/rv122_uvs/J1725+1152_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0742946 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00020258 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.818014 0.818014 1.63603 3.27205 6.54411 13.0882 26.1764 52.3529
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.074 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  366.742 
quit
! Quitting program
! Log file /scr/pima/rv122_uvs/J1725+1152_X_dfm.log closed on Fri Jul 13 21:10:03 2018