! Started logfile: /scr/pima/rv122_uvs/J1458+0416_X_dfm.log on Fri Jul 13 21:09:38 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv122_uvs/J1458+0416_X_uva.fits
! Reading UV FITS file: /scr/pima/rv122_uvs/J1458+0416_X_uva.fits
! AN table 1: 66 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.361953 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1458+0416
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 3440 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1458+0416_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 334 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 334 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 334 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 334 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018860Jy  sigma=18.249181
! Fit after  self-cal, rms=0.830101Jy  sigma=14.780737
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8816 mas, bmaj=1.861 mas, bpa=-0.004415 degrees
! Estimated noise=1.03695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130011 Jy
! Component: 100  -  total flux cleaned = 0.163013 Jy
! Total flux subtracted in 100 components = 0.163013 Jy
! Clean residual min=-0.006938 max=0.013440 Jy/beam
! Clean residual mean=-0.000015 rms=0.001675 Jy/beam
! Combined flux in latest and established models = 0.163013 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.163013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063016Jy  sigma=1.060849
! Fit after  self-cal, rms=0.062844Jy  sigma=1.059018
! Inverting map 
! Added new window around map position (-0.8, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150353 Jy
! Component: 100  -  total flux cleaned = 0.0231771 Jy
! Total flux subtracted in 100 components = 0.0231771 Jy
! Clean residual min=-0.005463 max=0.006463 Jy/beam
! Clean residual mean=-0.000010 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.18619 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.18619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058625Jy  sigma=0.952454
! Fit after  self-cal, rms=0.058486Jy  sigma=0.950636
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.086 mas, bmaj=2.136 mas, bpa=-0.6917 degrees
! Estimated noise=0.761561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00870169 Jy
! Component: 100  -  total flux cleaned = 0.0134347 Jy
! Component: 150  -  total flux cleaned = 0.0156783 Jy
! Component: 200  -  total flux cleaned = 0.0161157 Jy
! Total flux subtracted in 200 components = 0.0161157 Jy
! Clean residual min=-0.005064 max=0.005852 Jy/beam
! Clean residual mean=-0.000015 rms=0.001133 Jy/beam
! Combined flux in latest and established models = 0.202306 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 30 components and 0.202306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057334Jy  sigma=0.921297
! Fit after  self-cal, rms=0.057280Jy  sigma=0.920361
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.086 x 2.136 at -0.6917 degrees (North through East)
! Clean map  min=-0.0049095  max=0.16557 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.04     KP        1.12     
!   LA        1.03     MK        0.98     OV        0.97     PT        0.90     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.03     KP        1.09     
!   LA        1.05     MK        0.96     OV        0.94     PT        0.91     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.92     HN        1.02     KP        1.17     
!   LA        1.05     MK        0.96     OV        0.97     PT        0.91     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.10     KP        1.19     
!   LA        1.02     MK        0.95     OV        0.97     PT        0.93     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.057280Jy  sigma=0.920361
! Fit after  self-cal, rms=0.055615Jy  sigma=0.876972
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=2.14 mas, bpa=-0.9848 degrees
! Estimated noise=0.7596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476828 Jy
! Component: 100  -  total flux cleaned = 0.000299047 Jy
! Component: 150  -  total flux cleaned = 0.000154544 Jy
! Component: 200  -  total flux cleaned = 0.000112966 Jy
! Total flux subtracted in 200 components = 0.000112966 Jy
! Clean residual min=-0.002656 max=0.003231 Jy/beam
! Clean residual mean=-0.000011 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.202419 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.202419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055481Jy  sigma=0.874378
! Fit after  self-cal, rms=0.055532Jy  sigma=0.873736
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055532Jy  sigma=0.873736
! Fit after  self-cal, rms=0.055349Jy  sigma=0.867740
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.081 mas, bmaj=2.14 mas, bpa=-0.9932 degrees
! Estimated noise=0.759734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497631 Jy
! Component: 100  -  total flux cleaned = 0.000458832 Jy
! Component: 150  -  total flux cleaned = 0.000458865 Jy
! Component: 200  -  total flux cleaned = 0.000458826 Jy
! Total flux subtracted in 200 components = 0.000458826 Jy
! Clean residual min=-0.002447 max=0.003064 Jy/beam
! Clean residual mean=-0.000007 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.202878 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 53 components and 0.202878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055298Jy  sigma=0.866849
! Fit after  self-cal, rms=0.055299Jy  sigma=0.866742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21.2, 35.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123164 Jy
! Component: 100  -  total flux cleaned = 0.000765804 Jy
! Component: 150  -  total flux cleaned = 0.000625932 Jy
! Component: 200  -  total flux cleaned = 0.000469688 Jy
! Total flux subtracted in 200 components = 0.000469688 Jy
! Clean residual min=-0.002385 max=0.002599 Jy/beam
! Clean residual mean=-0.000007 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.203348 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.203348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055140Jy  sigma=0.864046
! Fit after  self-cal, rms=0.055128Jy  sigma=0.863901
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055128Jy  sigma=0.863901
! Fit after  self-cal, rms=0.055014Jy  sigma=0.854118
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.138 mas, bpa=-1.003 degrees
! Estimated noise=0.759976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105097 Jy
! Component: 100  -  total flux cleaned = 7.19281e-05 Jy
! Component: 150  -  total flux cleaned = 1.25531e-05 Jy
! Component: 200  -  total flux cleaned = 6.7589e-05 Jy
! Total flux subtracted in 200 components = 6.7589e-05 Jy
! Clean residual min=-0.002233 max=0.002523 Jy/beam
! Clean residual mean=-0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.203415 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 0.203415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054969Jy  sigma=0.853574
! Fit after  self-cal, rms=0.054975Jy  sigma=0.853502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (42, 31.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188013 Jy
! Component: 100  -  total flux cleaned = 0.00194428 Jy
! Component: 150  -  total flux cleaned = 0.00203894 Jy
! Component: 200  -  total flux cleaned = 0.00212234 Jy
! Total flux subtracted in 200 components = 0.00212234 Jy
! Clean residual min=-0.002127 max=0.002251 Jy/beam
! Clean residual mean=-0.000003 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.205538 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.205538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054829Jy  sigma=0.851023
! Fit after  self-cal, rms=0.054821Jy  sigma=0.850875
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054821Jy  sigma=0.850875
! Fit after  self-cal, rms=0.054831Jy  sigma=0.850678
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.801 mas, bmaj=3.195 mas, bpa=4.024 degrees
! Estimated noise=0.88315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012326 Jy
! Component: 100  -  total flux cleaned = 0.00136091 Jy
! Component: 150  -  total flux cleaned = 0.00141879 Jy
! Component: 200  -  total flux cleaned = 0.00139322 Jy
! Total flux subtracted in 200 components = 0.00139322 Jy
! Clean residual min=-0.002292 max=0.002207 Jy/beam
! Clean residual mean=-0.000006 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.206931 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 105 components and 0.206931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054802Jy  sigma=0.850249
! Fit after  self-cal, rms=0.054801Jy  sigma=0.850178
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251366 Jy
! Component: 100  -  total flux cleaned = 0.0002266 Jy
! Component: 150  -  total flux cleaned = 0.000225653 Jy
! Component: 200  -  total flux cleaned = 0.000204614 Jy
! Total flux subtracted in 200 components = 0.000204614 Jy
! Clean residual min=-0.002284 max=0.002163 Jy/beam
! Clean residual mean=-0.000006 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.207135 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 110 components and 0.207135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054790Jy  sigma=0.850050
! Fit after  self-cal, rms=0.054789Jy  sigma=0.850031
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.138 mas, bpa=-1.038 degrees
! Estimated noise=0.759602 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.082 x 2.138 at -1.038 degrees (North through East)
! Clean map  min=-0.0020873  max=0.16419 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8834 mas, bmaj=1.854 mas, bpa=-0.07662 degrees
! Estimated noise=1.03091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128801 Jy
! Component: 100  -  total flux cleaned = 0.163379 Jy
! Component: 150  -  total flux cleaned = 0.177997 Jy
! Component: 200  -  total flux cleaned = 0.185935 Jy
! Total flux subtracted in 200 components = 0.185935 Jy
! Clean residual min=-0.004013 max=0.004476 Jy/beam
! Clean residual mean=-0.000003 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.185936 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.185936 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.138 mas, bpa=-1.038 degrees
! Estimated noise=0.759602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00757435 Jy
! Component: 100  -  total flux cleaned = 0.0120887 Jy
! Component: 150  -  total flux cleaned = 0.0154198 Jy
! Component: 200  -  total flux cleaned = 0.0175218 Jy
! Total flux subtracted in 200 components = 0.0175218 Jy
! Clean residual min=-0.002502 max=0.002865 Jy/beam
! Clean residual mean=-0.000004 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.203457 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 43 components and 0.203457 Jy
! Inverting map 
! Added new window around map position (-2.4, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220835 Jy
! Component: 100  -  total flux cleaned = 0.00276003 Jy
! Component: 150  -  total flux cleaned = 0.00290328 Jy
! Component: 200  -  total flux cleaned = 0.0031018 Jy
! Total flux subtracted in 200 components = 0.0031018 Jy
! Clean residual min=-0.002367 max=0.002185 Jy/beam
! Clean residual mean=-0.000004 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.206559 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 65 components and 0.206559 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.801 mas, bmaj=3.195 mas, bpa=4.024 degrees
! Estimated noise=0.88315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079665 Jy
! Component: 100  -  total flux cleaned = 0.000893122 Jy
! Component: 150  -  total flux cleaned = 0.000933071 Jy
! Component: 200  -  total flux cleaned = 0.000967558 Jy
! Total flux subtracted in 200 components = 0.000967558 Jy
! Clean residual min=-0.002505 max=0.002111 Jy/beam
! Clean residual mean=-0.000007 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.207527 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.41956e-05 Jy
! Component: 100  -  total flux cleaned = 6.4162e-05 Jy
! Component: 150  -  total flux cleaned = 3.77328e-05 Jy
! Component: 200  -  total flux cleaned = 1.21196e-05 Jy
! Total flux subtracted in 200 components = 1.21196e-05 Jy
! Clean residual min=-0.002441 max=0.002109 Jy/beam
! Clean residual mean=-0.000007 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.207539 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 92 components and 0.207539 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.138 mas, bpa=-1.038 degrees
! Estimated noise=0.759602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000277172 Jy
! Component: 100  -  total flux cleaned = -0.000331698 Jy
! Component: 150  -  total flux cleaned = -0.000333199 Jy
! Component: 200  -  total flux cleaned = -0.000376519 Jy
! Total flux subtracted in 200 components = -0.000376519 Jy
! Clean residual min=-0.002177 max=0.002143 Jy/beam
! Clean residual mean=-0.000004 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.207162 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 110 components and 0.207162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054806Jy  sigma=0.849829
! Fit after  self-cal, rms=0.054772Jy  sigma=0.849537
wmodel J1458+0416_X_map.mod
! Writing 110 model components to file: J1458+0416_X_map.mod
wobs   J1458+0416_X_uvs.fits
! Writing UV FITS file: J1458+0416_X_uvs.fits
wwins  J1458+0416_X_map.win
! wwins: Wrote 6 windows to J1458+0416_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000434753 Jy
! Component: 100  -  total flux cleaned = -0.000958887 Jy
! Component: 150  -  total flux cleaned = -0.00139292 Jy
! Component: 200  -  total flux cleaned = -0.00160411 Jy
! Component: 250  -  total flux cleaned = -0.00177593 Jy
! Component: 300  -  total flux cleaned = -0.00177661 Jy
! Component: 350  -  total flux cleaned = -0.00174409 Jy
! Component: 400  -  total flux cleaned = -0.0018088 Jy
! Component: 450  -  total flux cleaned = -0.00184024 Jy
! Component: 500  -  total flux cleaned = -0.00193363 Jy
! Component: 550  -  total flux cleaned = -0.00187125 Jy
! Component: 600  -  total flux cleaned = -0.00190172 Jy
! Component: 650  -  total flux cleaned = -0.00187162 Jy
! Component: 700  -  total flux cleaned = -0.0019613 Jy
! Component: 750  -  total flux cleaned = -0.00190309 Jy
! Component: 800  -  total flux cleaned = -0.00196152 Jy
! Component: 850  -  total flux cleaned = -0.00199018 Jy
! Component: 900  -  total flux cleaned = -0.00190509 Jy
! Component: 950  -  total flux cleaned = -0.00196133 Jy
! Component: 1000  -  total flux cleaned = -0.00193386 Jy
! Component: 1050  -  total flux cleaned = -0.0019884 Jy
! Component: 1100  -  total flux cleaned = -0.00198845 Jy
! Component: 1150  -  total flux cleaned = -0.00206827 Jy
! Component: 1200  -  total flux cleaned = -0.00201519 Jy
! Component: 1250  -  total flux cleaned = -0.00209385 Jy
! Component: 1300  -  total flux cleaned = -0.00211952 Jy
! Component: 1350  -  total flux cleaned = -0.00217099 Jy
! Component: 1400  -  total flux cleaned = -0.00219646 Jy
! Component: 1450  -  total flux cleaned = -0.00234751 Jy
! Component: 1500  -  total flux cleaned = -0.00239727 Jy
! Component: 1550  -  total flux cleaned = -0.00242192 Jy
! Component: 1600  -  total flux cleaned = -0.00247104 Jy
! Component: 1650  -  total flux cleaned = -0.00256822 Jy
! Component: 1700  -  total flux cleaned = -0.00256812 Jy
! Component: 1750  -  total flux cleaned = -0.00268755 Jy
! Component: 1800  -  total flux cleaned = -0.00271111 Jy
! Component: 1850  -  total flux cleaned = -0.00280495 Jy
! Component: 1900  -  total flux cleaned = -0.0027583 Jy
! Component: 1950  -  total flux cleaned = -0.00292014 Jy
! Component: 2000  -  total flux cleaned = -0.0030119 Jy
! Component: 2050  -  total flux cleaned = -0.0030575 Jy
! Component: 2100  -  total flux cleaned = -0.00317047 Jy
! Component: 2150  -  total flux cleaned = -0.00321537 Jy
! Component: 2200  -  total flux cleaned = -0.00346046 Jy
! Component: 2250  -  total flux cleaned = -0.00350455 Jy
! Component: 2300  -  total flux cleaned = -0.00357047 Jy
! Component: 2350  -  total flux cleaned = -0.0036578 Jy
! Component: 2400  -  total flux cleaned = -0.00376612 Jy
! Component: 2450  -  total flux cleaned = -0.00393816 Jy
! Component: 2500  -  total flux cleaned = -0.00393819 Jy
! Component: 2550  -  total flux cleaned = -0.00404458 Jy
! Component: 2600  -  total flux cleaned = -0.00410812 Jy
! Component: 2650  -  total flux cleaned = -0.00421313 Jy
! Component: 2700  -  total flux cleaned = -0.0043173 Jy
! Component: 2750  -  total flux cleaned = -0.0044 Jy
! Component: 2800  -  total flux cleaned = -0.00454375 Jy
! Component: 2850  -  total flux cleaned = -0.00446172 Jy
! Component: 2900  -  total flux cleaned = -0.00470556 Jy
! Component: 2950  -  total flux cleaned = -0.00480638 Jy
! Component: 3000  -  total flux cleaned = -0.00484638 Jy
! Component: 3050  -  total flux cleaned = -0.00486634 Jy
! Component: 3100  -  total flux cleaned = -0.00488639 Jy
! Component: 3150  -  total flux cleaned = -0.00502441 Jy
! Component: 3200  -  total flux cleaned = -0.0050833 Jy
! Component: 3250  -  total flux cleaned = -0.00506374 Jy
! Component: 3300  -  total flux cleaned = -0.00519933 Jy
! Component: 3350  -  total flux cleaned = -0.00527635 Jy
! Component: 3400  -  total flux cleaned = -0.0053339 Jy
! Component: 3450  -  total flux cleaned = -0.00541007 Jy
! Component: 3500  -  total flux cleaned = -0.00548579 Jy
! Component: 3550  -  total flux cleaned = -0.00559858 Jy
! Component: 3600  -  total flux cleaned = -0.00559857 Jy
! Component: 3650  -  total flux cleaned = -0.00567297 Jy
! Component: 3700  -  total flux cleaned = -0.00567303 Jy
! Component: 3750  -  total flux cleaned = -0.00576508 Jy
! Component: 3800  -  total flux cleaned = -0.00587481 Jy
! Component: 3850  -  total flux cleaned = -0.00596594 Jy
! Component: 3900  -  total flux cleaned = -0.00605656 Jy
! Component: 3950  -  total flux cleaned = -0.0060925 Jy
! Component: 4000  -  total flux cleaned = -0.00616428 Jy
! Component: 4050  -  total flux cleaned = -0.00635994 Jy
! Total flux subtracted in 4096 components = -0.00639534 Jy
! Clean residual min=-0.001083 max=0.001113 Jy/beam
! Clean residual mean=-0.000002 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.200767 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 408 components and 0.200767 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv122_uvs/J1458+0416_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.082 x 2.138 at -1.038 degrees (North through East)
! Clean map  min=-0.0016415  max=0.16445 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv122_uvs/J1458+0416_X_map.fits
wmodel /scr/pima/rv122_uvs/J1458+0416_X_map.mod
! Writing 408 model components to file: /scr/pima/rv122_uvs/J1458+0416_X_map.mod
wobs   /scr/pima/rv122_uvs/J1458+0416_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv122_uvs/J1458+0416_X_uvs.fits
wwins  /scr/pima/rv122_uvs/J1458+0416_X_map.win
! wwins: Wrote 7 windows to /scr/pima/rv122_uvs/J1458+0416_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.164445 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000315019 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.574694 0.574694 1.14939 2.29878 4.59755 9.19511 18.3902 36.7804 73.5609
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.164 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  522.016 
quit
! Quitting program
! Log file /scr/pima/rv122_uvs/J1458+0416_X_dfm.log closed on Fri Jul 13 21:09:41 2018