! Started logfile: /scr/pima/rv121_uvs/J1702-2415_X_dfm.log on Sat Jul 28 00:42:39 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv121_uvs/J1702-2415_X_uva.fits ! Reading UV FITS file: /scr/pima/rv121_uvs/J1702-2415_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1702-2415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7920 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1702-2415_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005005Jy sigma=17.802010 ! Fit after self-cal, rms=0.935827Jy sigma=16.533426 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6404 mas, bmaj=1.687 mas, bpa=-4.899 degrees ! Estimated noise=0.832602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0505822 Jy ! Component: 100 - total flux cleaned = 0.0618935 Jy ! Total flux subtracted in 100 components = 0.0618935 Jy ! Clean residual min=-0.003725 max=0.003844 Jy/beam ! Clean residual mean=-0.000003 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.0618935 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0618935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060835Jy sigma=0.941644 ! Fit after self-cal, rms=0.060554Jy sigma=0.937758 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8338 mas, bmaj=2.103 mas, bpa=-4.042 degrees ! Estimated noise=0.463546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588608 Jy ! Component: 100 - total flux cleaned = 0.00836243 Jy ! Component: 150 - total flux cleaned = 0.00908158 Jy ! Component: 200 - total flux cleaned = 0.00923251 Jy ! Total flux subtracted in 200 components = 0.00923251 Jy ! Clean residual min=-0.002114 max=0.002329 Jy/beam ! Clean residual mean=-0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.071126 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.071126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060150Jy sigma=0.926313 ! Fit after self-cal, rms=0.060161Jy sigma=0.926188 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8338 x 2.103 at -4.042 degrees (North through East) ! Clean map min=-0.0019426 max=0.067006 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 1.22 KP 0.96 ! LA 1.00 MK 0.96 NL 1.04 OV 1.00 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.15 KP 0.97 ! LA 1.05 MK 1.03 NL 1.03 OV 0.97 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.15 KP 0.99 ! LA 1.02 MK 1.03 NL 0.97 OV 0.93 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 1.25 KP 1.00 ! LA 0.99 MK 1.01 NL 1.08 OV 0.97 ! PT 0.95 SC 1.01 ! ! ! Fit before self-cal, rms=0.060161Jy sigma=0.926188 ! Fit after self-cal, rms=0.063586Jy sigma=0.922533 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8411 mas, bmaj=2.1 mas, bpa=-3.706 degrees ! Estimated noise=0.462369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373627 Jy ! Component: 100 - total flux cleaned = -0.000396757 Jy ! Component: 150 - total flux cleaned = -0.000379117 Jy ! Component: 200 - total flux cleaned = -0.000362644 Jy ! Total flux subtracted in 200 components = -0.000362644 Jy ! Clean residual min=-0.002028 max=0.001994 Jy/beam ! Clean residual mean=-0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0707633 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 17 components and 0.0707633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063573Jy sigma=0.922286 ! Fit after self-cal, rms=0.063655Jy sigma=0.922158 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063655Jy sigma=0.922158 ! Fit after self-cal, rms=0.064502Jy sigma=0.920032 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8438 mas, bmaj=2.101 mas, bpa=-3.744 degrees ! Estimated noise=0.462519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152588 Jy ! Component: 100 - total flux cleaned = -0.000152438 Jy ! Component: 150 - total flux cleaned = -0.000141357 Jy ! Component: 200 - total flux cleaned = -0.000121533 Jy ! Total flux subtracted in 200 components = -0.000121533 Jy ! Clean residual min=-0.002043 max=0.001934 Jy/beam ! Clean residual mean=-0.000002 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0706418 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.0706418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064498Jy sigma=0.919943 ! Fit after self-cal, rms=0.064522Jy sigma=0.919893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05305e-05 Jy ! Component: 100 - total flux cleaned = 3.93647e-05 Jy ! Component: 150 - total flux cleaned = 5.60739e-05 Jy ! Component: 200 - total flux cleaned = 7.18938e-05 Jy ! Total flux subtracted in 200 components = 7.18938e-05 Jy ! Clean residual min=-0.002025 max=0.001943 Jy/beam ! Clean residual mean=-0.000002 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0707137 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0707137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064519Jy sigma=0.919845 ! Fit after self-cal, rms=0.064520Jy sigma=0.919840 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064520Jy sigma=0.919840 ! Fit after self-cal, rms=0.064777Jy sigma=0.919739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8449 mas, bmaj=2.106 mas, bpa=-3.73 degrees ! Estimated noise=0.462634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130143 Jy ! Component: 100 - total flux cleaned = -0.000130007 Jy ! Component: 150 - total flux cleaned = -0.00012201 Jy ! Component: 200 - total flux cleaned = -0.000106986 Jy ! Total flux subtracted in 200 components = -0.000106986 Jy ! Clean residual min=-0.002017 max=0.001925 Jy/beam ! Clean residual mean=-0.000003 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0706067 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0706067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064775Jy sigma=0.919688 ! Fit after self-cal, rms=0.064782Jy sigma=0.919682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.69564e-05 Jy ! Component: 100 - total flux cleaned = 2.45526e-05 Jy ! Component: 150 - total flux cleaned = 3.14304e-05 Jy ! Component: 200 - total flux cleaned = 3.79107e-05 Jy ! Total flux subtracted in 200 components = 3.79107e-05 Jy ! Clean residual min=-0.002006 max=0.001925 Jy/beam ! Clean residual mean=-0.000003 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0706446 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0706446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064780Jy sigma=0.919654 ! Fit after self-cal, rms=0.064780Jy sigma=0.919652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064780Jy sigma=0.919652 ! Fit after self-cal, rms=0.064747Jy sigma=0.919644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=5.221 mas, bpa=2.487 degrees ! Estimated noise=0.56088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217539 Jy ! Component: 100 - total flux cleaned = -0.000216947 Jy ! Component: 150 - total flux cleaned = -0.000216536 Jy ! Component: 200 - total flux cleaned = -0.000209148 Jy ! Total flux subtracted in 200 components = -0.000209148 Jy ! Clean residual min=-0.001887 max=0.002052 Jy/beam ! Clean residual mean=-0.000005 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0704355 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.0704355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064746Jy sigma=0.919669 ! Fit after self-cal, rms=0.064746Jy sigma=0.919656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.57688e-07 Jy ! Component: 100 - total flux cleaned = -1.49752e-07 Jy ! Component: 150 - total flux cleaned = 4.37191e-06 Jy ! Component: 200 - total flux cleaned = 1.19876e-05 Jy ! Total flux subtracted in 200 components = 1.19876e-05 Jy ! Clean residual min=-0.001885 max=0.002049 Jy/beam ! Clean residual mean=-0.000005 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0704474 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.0704475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064746Jy sigma=0.919675 ! Fit after self-cal, rms=0.064745Jy sigma=0.919667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8456 mas, bmaj=2.109 mas, bpa=-3.697 degrees ! Estimated noise=0.462639 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8456 x 2.109 at -3.697 degrees (North through East) ! Clean map min=-0.001793 max=0.066572 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6457 mas, bmaj=1.679 mas, bpa=-4.502 degrees ! Estimated noise=0.839597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510412 Jy ! Component: 100 - total flux cleaned = 0.0625464 Jy ! Component: 150 - total flux cleaned = 0.0665932 Jy ! Component: 200 - total flux cleaned = 0.0679295 Jy ! Total flux subtracted in 200 components = 0.0679295 Jy ! Clean residual min=-0.003315 max=0.003116 Jy/beam ! Clean residual mean=-0.000003 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0679295 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0679295 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8456 mas, bmaj=2.109 mas, bpa=-3.697 degrees ! Estimated noise=0.462639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176186 Jy ! Component: 100 - total flux cleaned = 0.00206731 Jy ! Component: 150 - total flux cleaned = 0.00215803 Jy ! Component: 200 - total flux cleaned = 0.00221087 Jy ! Total flux subtracted in 200 components = 0.00221087 Jy ! Clean residual min=-0.002009 max=0.001992 Jy/beam ! Clean residual mean=-0.000003 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0701404 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.0701404 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=5.221 mas, bpa=2.487 degrees ! Estimated noise=0.56088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156477 Jy ! Component: 100 - total flux cleaned = 0.000166022 Jy ! Component: 150 - total flux cleaned = 0.000173548 Jy ! Component: 200 - total flux cleaned = 0.000179687 Jy ! Total flux subtracted in 200 components = 0.000179687 Jy ! Clean residual min=-0.001921 max=0.002018 Jy/beam ! Clean residual mean=-0.000005 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0703201 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.72537e-08 Jy ! Component: 100 - total flux cleaned = 4.63678e-06 Jy ! Component: 150 - total flux cleaned = 8.56272e-06 Jy ! Component: 200 - total flux cleaned = 1.50799e-05 Jy ! Total flux subtracted in 200 components = 1.50799e-05 Jy ! Clean residual min=-0.001906 max=0.002025 Jy/beam ! Clean residual mean=-0.000005 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0703352 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 20 components and 0.0703352 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8456 mas, bmaj=2.109 mas, bpa=-3.697 degrees ! Estimated noise=0.462639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121502 Jy ! Component: 100 - total flux cleaned = -0.00012221 Jy ! Component: 150 - total flux cleaned = -0.000103143 Jy ! Component: 200 - total flux cleaned = -6.86607e-05 Jy ! Total flux subtracted in 200 components = -6.86607e-05 Jy ! Clean residual min=-0.001989 max=0.001965 Jy/beam ! Clean residual mean=-0.000003 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0702665 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.0702665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064751Jy sigma=0.919884 ! Fit after self-cal, rms=0.064751Jy sigma=0.919868 wmodel J1702-2415_X_map.mod ! Writing 30 model components to file: J1702-2415_X_map.mod wobs J1702-2415_X_uvs.fits ! Writing UV FITS file: J1702-2415_X_uvs.fits wwins J1702-2415_X_map.win ! wwins: Wrote 1 windows to J1702-2415_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.8242e-05 Jy ! Component: 100 - total flux cleaned = -3.18142e-05 Jy ! Component: 150 - total flux cleaned = -0.000292949 Jy ! Component: 200 - total flux cleaned = -0.000486815 Jy ! Component: 250 - total flux cleaned = -0.000594326 Jy ! Component: 300 - total flux cleaned = -0.000804051 Jy ! Component: 350 - total flux cleaned = -0.000932047 Jy ! Component: 400 - total flux cleaned = -0.00113257 Jy ! Component: 450 - total flux cleaned = -0.00135372 Jy ! Component: 500 - total flux cleaned = -0.00149837 Jy ! Component: 550 - total flux cleaned = -0.00164047 Jy ! Component: 600 - total flux cleaned = -0.00178045 Jy ! Component: 650 - total flux cleaned = -0.00184922 Jy ! Component: 700 - total flux cleaned = -0.00191711 Jy ! Component: 750 - total flux cleaned = -0.00196168 Jy ! Component: 800 - total flux cleaned = -0.0020281 Jy ! Component: 850 - total flux cleaned = -0.00209359 Jy ! Component: 900 - total flux cleaned = -0.00215798 Jy ! Component: 950 - total flux cleaned = -0.00226418 Jy ! Component: 1000 - total flux cleaned = -0.00236883 Jy ! Component: 1050 - total flux cleaned = -0.00243079 Jy ! Component: 1100 - total flux cleaned = -0.00247203 Jy ! Component: 1150 - total flux cleaned = -0.0026751 Jy ! Component: 1200 - total flux cleaned = -0.00275532 Jy ! Component: 1250 - total flux cleaned = -0.0028743 Jy ! Component: 1300 - total flux cleaned = -0.00295285 Jy ! Component: 1350 - total flux cleaned = -0.00308934 Jy ! Component: 1400 - total flux cleaned = -0.00312788 Jy ! Component: 1450 - total flux cleaned = -0.00314709 Jy ! Component: 1500 - total flux cleaned = -0.00327969 Jy ! Component: 1550 - total flux cleaned = -0.00339243 Jy ! Component: 1600 - total flux cleaned = -0.003411 Jy ! Component: 1650 - total flux cleaned = -0.00348494 Jy ! Component: 1700 - total flux cleaned = -0.00359513 Jy ! Component: 1750 - total flux cleaned = -0.00372259 Jy ! Component: 1800 - total flux cleaned = -0.00381285 Jy ! Component: 1850 - total flux cleaned = -0.0039563 Jy ! Component: 1900 - total flux cleaned = -0.00402753 Jy ! Component: 1950 - total flux cleaned = -0.0041158 Jy ! Component: 2000 - total flux cleaned = -0.00415068 Jy ! Component: 2050 - total flux cleaned = -0.0041856 Jy ! Component: 2100 - total flux cleaned = -0.00423777 Jy ! Component: 2150 - total flux cleaned = -0.00435821 Jy ! Component: 2200 - total flux cleaned = -0.00442665 Jy ! Component: 2250 - total flux cleaned = -0.00449455 Jy ! Component: 2300 - total flux cleaned = -0.00452819 Jy ! Component: 2350 - total flux cleaned = -0.00461216 Jy ! Component: 2400 - total flux cleaned = -0.00469561 Jy ! Component: 2450 - total flux cleaned = -0.00474529 Jy ! Component: 2500 - total flux cleaned = -0.00484428 Jy ! Component: 2550 - total flux cleaned = -0.00494252 Jy ! Component: 2600 - total flux cleaned = -0.00499131 Jy ! Component: 2650 - total flux cleaned = -0.00508849 Jy ! Component: 2700 - total flux cleaned = -0.0051691 Jy ! Component: 2750 - total flux cleaned = -0.00521704 Jy ! Component: 2800 - total flux cleaned = -0.00528071 Jy ! Component: 2850 - total flux cleaned = -0.00535982 Jy ! Component: 2900 - total flux cleaned = -0.00535984 Jy ! Component: 2950 - total flux cleaned = -0.00542246 Jy ! Component: 3000 - total flux cleaned = -0.00548472 Jy ! Component: 3050 - total flux cleaned = -0.00556207 Jy ! Component: 3100 - total flux cleaned = -0.00563904 Jy ! Component: 3150 - total flux cleaned = -0.00566962 Jy ! Component: 3200 - total flux cleaned = -0.00573065 Jy ! Component: 3250 - total flux cleaned = -0.00576093 Jy ! Component: 3300 - total flux cleaned = -0.00580621 Jy ! Component: 3350 - total flux cleaned = -0.00586628 Jy ! Component: 3400 - total flux cleaned = -0.00588131 Jy ! Component: 3450 - total flux cleaned = -0.00598505 Jy ! Component: 3500 - total flux cleaned = -0.00601456 Jy ! Component: 3550 - total flux cleaned = -0.00605872 Jy ! Component: 3600 - total flux cleaned = -0.00614641 Jy ! Component: 3650 - total flux cleaned = -0.00624807 Jy ! Component: 3700 - total flux cleaned = -0.00629135 Jy ! Component: 3750 - total flux cleaned = -0.00627698 Jy ! Component: 3800 - total flux cleaned = -0.00639156 Jy ! Component: 3850 - total flux cleaned = -0.00642008 Jy ! Component: 3900 - total flux cleaned = -0.00653357 Jy ! Component: 3950 - total flux cleaned = -0.00657591 Jy ! Component: 4000 - total flux cleaned = -0.00657585 Jy ! Component: 4050 - total flux cleaned = -0.00671571 Jy ! Total flux subtracted in 4096 components = -0.00672956 Jy ! Clean residual min=-0.000899 max=0.000895 Jy/beam ! Clean residual mean=-0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0635369 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 335 components and 0.0635369 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv121_uvs/J1702-2415_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8456 x 2.109 at -3.697 degrees (North through East) ! Clean map min=-0.0012796 max=0.066629 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv121_uvs/J1702-2415_X_map.fits wmodel /scr/pima/rv121_uvs/J1702-2415_X_map.mod ! Writing 335 model components to file: /scr/pima/rv121_uvs/J1702-2415_X_map.mod wobs /scr/pima/rv121_uvs/J1702-2415_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv121_uvs/J1702-2415_X_uvs.fits wwins /scr/pima/rv121_uvs/J1702-2415_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv121_uvs/J1702-2415_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0666286 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236788 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06616 1.06616 2.13231 4.26462 8.52924 17.0585 34.117 68.2339 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.066 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 281.384 quit ! Quitting program ! Log file /scr/pima/rv121_uvs/J1702-2415_X_dfm.log closed on Sat Jul 28 00:42:43 2018