! Started logfile: /scr/pima/rv121_uvs/J1700-2610_X_dfm.log on Sat Jul 28 00:42:34 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv121_uvs/J1700-2610_X_uva.fits ! Reading UV FITS file: /scr/pima/rv121_uvs/J1700-2610_X_uva.fits ! AN table 1: 51 integrations on 3 of 3 possible baselines. ! AN table 2: 10 integrations on 3 of 3 possible baselines. ! AN table 3: 7 integrations on 3 of 3 possible baselines. ! AN table 4: 3 integrations on 21 of 21 possible baselines. ! AN table 5: 3 integrations on 21 of 21 possible baselines. ! AN table 6: 2 integrations on 21 of 21 possible baselines. ! AN table 7: 10 integrations on 28 of 28 possible baselines. ! AN table 8: 22 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.483438 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 2452 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1700-2610_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 64 telescope corrections were flagged in sub-array 7. ! A total of 138 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 64 telescope corrections were flagged in sub-array 7. ! A total of 138 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 64 telescope corrections were flagged in sub-array 7. ! A total of 138 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 64 telescope corrections were flagged in sub-array 7. ! A total of 138 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.723749Jy sigma=19.291712 ! Fit after self-cal, rms=0.515358Jy sigma=5.659656 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.6% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.7122 mas, bmaj=0.9665 mas, bpa=6.819 degrees ! Estimated noise=2.11263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.08395 Jy ! Component: 100 - total flux cleaned = 1.32819 Jy ! Total flux subtracted in 100 components = 1.32819 Jy ! Clean residual min=-0.035076 max=0.099158 Jy/beam ! Clean residual mean=0.000129 rms=0.008199 Jy/beam ! Combined flux in latest and established models = 1.32819 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.32819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309164Jy sigma=2.949606 ! Fit after self-cal, rms=0.309125Jy sigma=2.949428 ! Inverting map ! Your choice of large map pixels excluded 2.6% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Added new window around map position (-0.2, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101114 Jy ! Component: 100 - total flux cleaned = 0.158259 Jy ! Total flux subtracted in 100 components = 0.158259 Jy ! Clean residual min=-0.030528 max=0.066710 Jy/beam ! Clean residual mean=0.000049 rms=0.006030 Jy/beam ! Combined flux in latest and established models = 1.48645 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 1.48645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255716Jy sigma=2.225932 ! Fit after self-cal, rms=0.254407Jy sigma=2.202889 ! Inverting map ! Your choice of large map pixels excluded 2.6% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Added new window around map position (2.4, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.053752 Jy ! Component: 100 - total flux cleaned = 0.0876624 Jy ! Total flux subtracted in 100 components = 0.0876624 Jy ! Clean residual min=-0.027218 max=0.042294 Jy/beam ! Clean residual mean=-0.000001 rms=0.005156 Jy/beam ! Combined flux in latest and established models = 1.57411 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 1.57411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241683Jy sigma=2.028857 ! Fit after self-cal, rms=0.240918Jy sigma=2.014676 ! Inverting map ! Your choice of large map pixels excluded 2.6% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Added new window around map position (1, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342204 Jy ! Component: 100 - total flux cleaned = 0.0462796 Jy ! Total flux subtracted in 100 components = 0.0462796 Jy ! Clean residual min=-0.027281 max=0.026901 Jy/beam ! Clean residual mean=-0.000027 rms=0.004688 Jy/beam ! Combined flux in latest and established models = 1.62039 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 1.62039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239207Jy sigma=1.981646 ! Fit after self-cal, rms=0.238871Jy sigma=1.977397 ! Inverting map ! Your choice of large map pixels excluded 2.6% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.6% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.9084 mas, bmaj=1.063 mas, bpa=20.98 degrees ! Estimated noise=1.73439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263451 Jy ! Component: 100 - total flux cleaned = 0.00124833 Jy ! Component: 150 - total flux cleaned = 0.000621351 Jy ! Component: 200 - total flux cleaned = 0.000586812 Jy ! Total flux subtracted in 200 components = 0.000586812 Jy ! Clean residual min=-0.020932 max=0.018315 Jy/beam ! Clean residual mean=-0.000052 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 1.62098 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 1.62098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237659Jy sigma=1.963666 ! Fit after self-cal, rms=0.237546Jy sigma=1.962131 ! Inverting map ! Your choice of large map pixels excluded 2.6% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9084 x 1.063 at 20.98 degrees (North through East) ! Clean map min=-0.022178 max=1.3616 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.15 KP 1.00 LA 1.01 ! NL 1.08 PT 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.02 HH 6.94 HN 1.05 KP 1.00 ! LA 1.00 OV 1.01 PT 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.99 KP 0.99 LA 1.01 ! MK 1.05 OV 0.99 PT 0.99 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 0.99 KP 1.00 MK 1.02 ! NL 0.94 OV 0.98 PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.95 KP 0.98 LA 0.98 MK 0.97 ! NL 1.01 OV 0.97 PT 0.99 SC 1.06 ! ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 HN 1.25 KP 1.00 LA 1.01 ! NL 1.09 PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.05 HH 6.82 HN 1.10 KP 0.99 ! LA 1.02 OV 1.01 PT 1.04 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.00 KP 0.99 LA 1.01 ! MK 1.05 OV 0.95 PT 1.01 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 0.96 KP 0.98 MK 1.05 ! NL 0.93 OV 0.99 PT 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.97 KP 0.97 LA 0.99 MK 0.98 ! NL 1.02 OV 0.96 PT 1.00 SC 1.07 ! ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.04 HN 1.16 KP 1.01 LA 1.04 ! NL 1.13 PT 1.00 SC 0.95 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.03 HH 12.16 HN 1.14 KP 1.01 ! LA 1.01 OV 1.01 PT 1.03 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 1.00 KP 0.99 LA 1.01 ! MK 1.03 OV 0.99 PT 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 FD 0.96 KP 1.00 MK 1.01 ! NL 0.94 OV 1.00 PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.97 KP 0.97 LA 1.00 MK 0.97 ! NL 1.03 OV 0.98 PT 0.99 SC 1.07 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* SC 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.05 HN 1.22 KP 1.00 LA 1.04 ! NL 1.13 PT 1.01 SC 0.94 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.06 HH 14.84 HN 1.12 KP 0.99 ! LA 1.02 OV 1.02 PT 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.03 FD 1.01 KP 1.01 LA 1.00 ! MK 1.03 OV 0.99 PT 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 FD 0.97 KP 1.01 MK 1.01 ! NL 0.95 OV 0.99 PT 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.96 KP 0.98 LA 0.99 MK 0.96 ! NL 1.04 OV 0.98 PT 1.00 SC 1.09 ! ! ! Fit before self-cal, rms=0.237546Jy sigma=1.962131 ! Fit after self-cal, rms=0.323385Jy sigma=0.858853 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.9394 mas, bmaj=2.274 mas, bpa=-10.41 degrees ! Estimated noise=1.85468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119247 Jy ! Component: 100 - total flux cleaned = -0.0126504 Jy ! Component: 150 - total flux cleaned = -0.0126343 Jy ! Component: 200 - total flux cleaned = -0.0134249 Jy ! Total flux subtracted in 200 components = -0.0134249 Jy ! Clean residual min=-0.010619 max=0.008115 Jy/beam ! Clean residual mean=-0.000113 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 1.60755 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 1.60755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321791Jy sigma=0.821641 ! Fit after self-cal, rms=0.322573Jy sigma=0.814937 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322573Jy sigma=0.814937 ! Fit after self-cal, rms=0.325321Jy sigma=0.767437 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.9394 mas, bmaj=2.277 mas, bpa=-10.38 degrees ! Estimated noise=1.85127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00849578 Jy ! Component: 100 - total flux cleaned = -0.00877391 Jy ! Component: 150 - total flux cleaned = -0.00924073 Jy ! Component: 200 - total flux cleaned = -0.0094372 Jy ! Total flux subtracted in 200 components = -0.0094372 Jy ! Clean residual min=-0.008088 max=0.007394 Jy/beam ! Clean residual mean=0.000007 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 1.59811 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 1.59811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324234Jy sigma=0.746602 ! Fit after self-cal, rms=0.323987Jy sigma=0.742800 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213607 Jy ! Component: 100 - total flux cleaned = -0.00234116 Jy ! Component: 150 - total flux cleaned = -0.00268069 Jy ! Component: 200 - total flux cleaned = -0.00282809 Jy ! Total flux subtracted in 200 components = -0.00282809 Jy ! Clean residual min=-0.007223 max=0.007111 Jy/beam ! Clean residual mean=0.000008 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 1.59529 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 1.59529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323356Jy sigma=0.733151 ! Fit after self-cal, rms=0.323210Jy sigma=0.731635 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Added new window around map position (5.6, -43.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320053 Jy ! Component: 100 - total flux cleaned = 0.00368222 Jy ! Component: 150 - total flux cleaned = 0.00367938 Jy ! Component: 200 - total flux cleaned = 0.00367495 Jy ! Total flux subtracted in 200 components = 0.00367495 Jy ! Clean residual min=-0.007113 max=0.005805 Jy/beam ! Clean residual mean=0.000005 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 1.59896 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 1.59896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322632Jy sigma=0.723085 ! Fit after self-cal, rms=0.322505Jy sigma=0.722367 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322505Jy sigma=0.722367 ! Fit after self-cal, rms=0.323456Jy sigma=0.713006 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.9394 mas, bmaj=2.279 mas, bpa=-10.35 degrees ! Estimated noise=1.85035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00564073 Jy ! Component: 100 - total flux cleaned = -0.00545951 Jy ! Component: 150 - total flux cleaned = -0.00516036 Jy ! Component: 200 - total flux cleaned = -0.00528835 Jy ! Total flux subtracted in 200 components = -0.00528835 Jy ! Clean residual min=-0.006257 max=0.005043 Jy/beam ! Clean residual mean=-0.000007 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 1.59367 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 1.59367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322907Jy sigma=0.704349 ! Fit after self-cal, rms=0.322850Jy sigma=0.702894 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133187 Jy ! Component: 100 - total flux cleaned = -0.00134915 Jy ! Component: 150 - total flux cleaned = -0.00135153 Jy ! Component: 200 - total flux cleaned = -0.00135215 Jy ! Total flux subtracted in 200 components = -0.00135215 Jy ! Clean residual min=-0.005640 max=0.004910 Jy/beam ! Clean residual mean=-0.000006 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 1.59232 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 1.59232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322507Jy sigma=0.698805 ! Fit after self-cal, rms=0.322477Jy sigma=0.698337 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322477Jy sigma=0.698337 ! Fit after self-cal, rms=0.323122Jy sigma=0.695804 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=2.562 mas, bmaj=5.738 mas, bpa=-7.116 degrees ! Estimated noise=2.29645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0046371 Jy ! Component: 100 - total flux cleaned = -0.00532877 Jy ! Component: 150 - total flux cleaned = -0.00580246 Jy ! Component: 200 - total flux cleaned = -0.00620247 Jy ! Total flux subtracted in 200 components = -0.00620247 Jy ! Clean residual min=-0.005310 max=0.004804 Jy/beam ! Clean residual mean=-0.000022 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 1.58612 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 1.58612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323159Jy sigma=0.695285 ! Fit after self-cal, rms=0.323115Jy sigma=0.693944 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00076237 Jy ! Component: 100 - total flux cleaned = -0.00116503 Jy ! Component: 150 - total flux cleaned = -0.0015033 Jy ! Component: 200 - total flux cleaned = -0.00168145 Jy ! Total flux subtracted in 200 components = -0.00168145 Jy ! Clean residual min=-0.005152 max=0.004729 Jy/beam ! Clean residual mean=-0.000021 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 1.58444 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 1.58444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323117Jy sigma=0.694294 ! Fit after self-cal, rms=0.323109Jy sigma=0.693764 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.9397 mas, bmaj=2.279 mas, bpa=-10.34 degrees ! Estimated noise=1.84967 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9397 x 2.279 at -10.34 degrees (North through East) ! Clean map min=-0.011662 max=1.3893 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323109Jy sigma=0.693764 ! Fit after self-cal, rms=0.340218Jy sigma=0.652773 ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.9399 mas, bmaj=2.279 mas, bpa=-10.37 degrees ! Estimated noise=1.84871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025579 Jy ! Component: 100 - total flux cleaned = -0.00255964 Jy ! Component: 150 - total flux cleaned = -0.00255567 Jy ! Component: 200 - total flux cleaned = -0.00255076 Jy ! Total flux subtracted in 200 components = -0.00255076 Jy ! Clean residual min=-0.005038 max=0.004616 Jy/beam ! Clean residual mean=-0.000016 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 1.58188 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 1.58188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339851Jy sigma=0.648174 ! Fit after self-cal, rms=0.339847Jy sigma=0.647470 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000731485 Jy ! Component: 100 - total flux cleaned = -0.000635216 Jy ! Component: 150 - total flux cleaned = -0.000720682 Jy ! Component: 200 - total flux cleaned = -0.000719828 Jy ! Total flux subtracted in 200 components = -0.000719828 Jy ! Clean residual min=-0.004917 max=0.004573 Jy/beam ! Clean residual mean=-0.000015 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 1.58117 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 1.58117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339609Jy sigma=0.644954 ! Fit after self-cal, rms=0.339604Jy sigma=0.644699 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339604Jy sigma=0.644699 ! Fit after self-cal, rms=0.339963Jy sigma=0.643572 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.7395 mas, bmaj=1.783 mas, bpa=-8.941 degrees ! Estimated noise=2.2663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.09335 Jy ! Component: 100 - total flux cleaned = 1.335 Jy ! Component: 150 - total flux cleaned = 1.42039 Jy ! Component: 200 - total flux cleaned = 1.47171 Jy ! Total flux subtracted in 200 components = 1.47171 Jy ! Clean residual min=-0.013891 max=0.027017 Jy/beam ! Clean residual mean=0.000018 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 1.47171 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.47171 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.94 mas, bmaj=2.279 mas, bpa=-10.37 degrees ! Estimated noise=1.8481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490949 Jy ! Component: 100 - total flux cleaned = 0.0742659 Jy ! Component: 150 - total flux cleaned = 0.0884994 Jy ! Component: 200 - total flux cleaned = 0.0972268 Jy ! Total flux subtracted in 200 components = 0.0972268 Jy ! Clean residual min=-0.006905 max=0.006039 Jy/beam ! Clean residual mean=-0.000015 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 1.56894 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 35 components and 1.56894 Jy ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=2.565 mas, bmaj=5.746 mas, bpa=-7.065 degrees ! Estimated noise=2.29309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521694 Jy ! Component: 100 - total flux cleaned = 0.00648806 Jy ! Component: 150 - total flux cleaned = 0.00721918 Jy ! Component: 200 - total flux cleaned = 0.00771179 Jy ! Total flux subtracted in 200 components = 0.00771179 Jy ! Clean residual min=-0.004974 max=0.004924 Jy/beam ! Clean residual mean=-0.000034 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 1.57665 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425011 Jy ! Component: 100 - total flux cleaned = 0.000873787 Jy ! Component: 150 - total flux cleaned = 0.00118021 Jy ! Component: 200 - total flux cleaned = 0.00132115 Jy ! Total flux subtracted in 200 components = 0.00132115 Jy ! Clean residual min=-0.004734 max=0.004840 Jy/beam ! Clean residual mean=-0.000035 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 1.57797 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 1.57797 Jy ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! Estimated beam: bmin=0.94 mas, bmaj=2.279 mas, bpa=-10.37 degrees ! Estimated noise=1.8481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131209 Jy ! Component: 100 - total flux cleaned = 0.00145053 Jy ! Component: 150 - total flux cleaned = 0.00143777 Jy ! Component: 200 - total flux cleaned = 0.00122965 Jy ! Total flux subtracted in 200 components = 0.00122965 Jy ! Clean residual min=-0.005540 max=0.004946 Jy/beam ! Clean residual mean=-0.000019 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 1.5792 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 1.5792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343290Jy sigma=0.648285 ! Fit after self-cal, rms=0.342816Jy sigma=0.646341 wmodel J1700-2610_X_map.mod ! Writing 65 model components to file: J1700-2610_X_map.mod wobs J1700-2610_X_uvs.fits ! Writing UV FITS file: J1700-2610_X_uvs.fits wwins J1700-2610_X_map.win ! wwins: Wrote 5 windows to J1700-2610_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133782 Jy ! Component: 100 - total flux cleaned = -0.00186217 Jy ! Component: 150 - total flux cleaned = -0.00219939 Jy ! Component: 200 - total flux cleaned = -0.00244716 Jy ! Component: 250 - total flux cleaned = -0.00284615 Jy ! Component: 300 - total flux cleaned = -0.00300136 Jy ! Component: 350 - total flux cleaned = -0.00315322 Jy ! Component: 400 - total flux cleaned = -0.00330113 Jy ! Component: 450 - total flux cleaned = -0.00315423 Jy ! Component: 500 - total flux cleaned = -0.00329981 Jy ! Component: 550 - total flux cleaned = -0.00336998 Jy ! Component: 600 - total flux cleaned = -0.00315832 Jy ! Component: 650 - total flux cleaned = -0.00343726 Jy ! Component: 700 - total flux cleaned = -0.00336818 Jy ! Component: 750 - total flux cleaned = -0.00350481 Jy ! Component: 800 - total flux cleaned = -0.00357289 Jy ! Component: 850 - total flux cleaned = -0.00370799 Jy ! Component: 900 - total flux cleaned = -0.00377414 Jy ! Component: 950 - total flux cleaned = -0.0039061 Jy ! Component: 1000 - total flux cleaned = -0.00409969 Jy ! Component: 1050 - total flux cleaned = -0.00416415 Jy ! Component: 1100 - total flux cleaned = -0.00422756 Jy ! Component: 1150 - total flux cleaned = -0.00454173 Jy ! Component: 1200 - total flux cleaned = -0.00479107 Jy ! Component: 1250 - total flux cleaned = -0.0047901 Jy ! Component: 1300 - total flux cleaned = -0.00497321 Jy ! Component: 1350 - total flux cleaned = -0.00503373 Jy ! Component: 1400 - total flux cleaned = -0.00521413 Jy ! Component: 1450 - total flux cleaned = -0.00527406 Jy ! Component: 1500 - total flux cleaned = -0.00527399 Jy ! Component: 1550 - total flux cleaned = -0.00550873 Jy ! Component: 1600 - total flux cleaned = -0.00539204 Jy ! Component: 1650 - total flux cleaned = -0.00539134 Jy ! Component: 1700 - total flux cleaned = -0.00556224 Jy ! Component: 1750 - total flux cleaned = -0.00527829 Jy ! Component: 1800 - total flux cleaned = -0.00527845 Jy ! Component: 1850 - total flux cleaned = -0.0054454 Jy ! Component: 1900 - total flux cleaned = -0.0052236 Jy ! Component: 1950 - total flux cleaned = -0.00522384 Jy ! Component: 2000 - total flux cleaned = -0.00533258 Jy ! Component: 2050 - total flux cleaned = -0.0052242 Jy ! Component: 2100 - total flux cleaned = -0.00549363 Jy ! Component: 2150 - total flux cleaned = -0.00517222 Jy ! Component: 2200 - total flux cleaned = -0.00506528 Jy ! Component: 2250 - total flux cleaned = -0.00522335 Jy ! Component: 2300 - total flux cleaned = -0.00501327 Jy ! Component: 2350 - total flux cleaned = -0.00506469 Jy ! Component: 2400 - total flux cleaned = -0.0049614 Jy ! Component: 2450 - total flux cleaned = -0.00490947 Jy ! Component: 2500 - total flux cleaned = -0.00501172 Jy ! Component: 2550 - total flux cleaned = -0.00491041 Jy ! Component: 2600 - total flux cleaned = -0.00491015 Jy ! Component: 2650 - total flux cleaned = -0.00480932 Jy ! Component: 2700 - total flux cleaned = -0.00475935 Jy ! Component: 2750 - total flux cleaned = -0.0046107 Jy ! Component: 2800 - total flux cleaned = -0.00465982 Jy ! Component: 2850 - total flux cleaned = -0.00475774 Jy ! Component: 2900 - total flux cleaned = -0.0047089 Jy ! Component: 2950 - total flux cleaned = -0.00461178 Jy ! Component: 3000 - total flux cleaned = -0.00446717 Jy ! Component: 3050 - total flux cleaned = -0.0043714 Jy ! Component: 3100 - total flux cleaned = -0.00432375 Jy ! Component: 3150 - total flux cleaned = -0.00427642 Jy ! Component: 3200 - total flux cleaned = -0.00427635 Jy ! Component: 3250 - total flux cleaned = -0.00418235 Jy ! Component: 3300 - total flux cleaned = -0.00418252 Jy ! Component: 3350 - total flux cleaned = -0.00422866 Jy ! Component: 3400 - total flux cleaned = -0.0039988 Jy ! Component: 3450 - total flux cleaned = -0.00418238 Jy ! Component: 3500 - total flux cleaned = -0.00431891 Jy ! Component: 3550 - total flux cleaned = -0.00409204 Jy ! Component: 3600 - total flux cleaned = -0.00427286 Jy ! Component: 3650 - total flux cleaned = -0.00440733 Jy ! Component: 3700 - total flux cleaned = -0.00436317 Jy ! Component: 3750 - total flux cleaned = -0.00436303 Jy ! Component: 3800 - total flux cleaned = -0.0044512 Jy ! Component: 3850 - total flux cleaned = -0.00436325 Jy ! Component: 3900 - total flux cleaned = -0.0043632 Jy ! Component: 3950 - total flux cleaned = -0.00436292 Jy ! Component: 4000 - total flux cleaned = -0.0043632 Jy ! Component: 4050 - total flux cleaned = -0.00436343 Jy ! Total flux subtracted in 4096 components = -0.00436355 Jy ! Clean residual min=-0.002262 max=0.002618 Jy/beam ! Clean residual mean=-0.000004 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 1.57483 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 364 components and 1.57483 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv121_uvs/J1700-2610_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.94 x 2.279 at -10.37 degrees (North through East) ! Clean map min=-0.0085481 max=1.3997 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv121_uvs/J1700-2610_X_map.fits wmodel /scr/pima/rv121_uvs/J1700-2610_X_map.mod ! Writing 364 model components to file: /scr/pima/rv121_uvs/J1700-2610_X_map.mod wobs /scr/pima/rv121_uvs/J1700-2610_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv121_uvs/J1700-2610_X_uvs.fits wwins /scr/pima/rv121_uvs/J1700-2610_X_map.win ! wwins: Wrote 6 windows to /scr/pima/rv121_uvs/J1700-2610_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.39966 invert ! Inverting map ! Your choice of large map pixels excluded 3.47% of the data. ! The x-axis pixel size should ideally be below 0.1701 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000732302 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.15696 0.15696 0.313919 0.627839 1.25568 2.51135 5.02271 10.0454 20.0908 40.1817 80.3633 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.399 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1911.32 quit ! Quitting program ! Log file /scr/pima/rv121_uvs/J1700-2610_X_dfm.log closed on Sat Jul 28 00:42:39 2018