! Started logfile: /scr/pima/rv121_uvs/J1316-3338_S_dfm.log on Sat Jul 28 00:11:15 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv121_uvs/J1316-3338_S_uva.fits
! Reading UV FITS file: /scr/pima/rv121_uvs/J1316-3338_S_uva.fits
! AN table 1: 17 integrations on 28 of 28 possible baselines.
! AN table 2: 15 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.525591 visibilities/baseline/integration-bin.
! Found source: J1316-3338
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 2136 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1316-3338_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 63 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 63 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 83 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 63 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.080950Jy  sigma=14.431273
! Fit after  self-cal, rms=0.638108Jy  sigma=8.713515
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=9.857 mas, bpa=-0.3985 degrees
! Estimated noise=1.936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.243221 Jy
! Component: 100  -  total flux cleaned = 0.345098 Jy
! Total flux subtracted in 100 components = 0.345098 Jy
! Clean residual min=-0.022255 max=0.050688 Jy/beam
! Clean residual mean=0.000010 rms=0.005342 Jy/beam
! Combined flux in latest and established models = 0.345098 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.345098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177759Jy  sigma=2.318272
! Fit after  self-cal, rms=0.177387Jy  sigma=2.314030
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0616145 Jy
! Component: 100  -  total flux cleaned = 0.100657 Jy
! Total flux subtracted in 100 components = 0.100657 Jy
! Clean residual min=-0.014322 max=0.026957 Jy/beam
! Clean residual mean=-0.000012 rms=0.003538 Jy/beam
! Combined flux in latest and established models = 0.445755 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.445755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126663Jy  sigma=1.597364
! Fit after  self-cal, rms=0.126453Jy  sigma=1.595398
! Inverting map 
! Added new window around map position (-5, -4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0297535 Jy
! Component: 100  -  total flux cleaned = 0.05083 Jy
! Total flux subtracted in 100 components = 0.05083 Jy
! Clean residual min=-0.012247 max=0.018809 Jy/beam
! Clean residual mean=-0.000024 rms=0.002916 Jy/beam
! Combined flux in latest and established models = 0.496585 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 61 components and 0.496585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108463Jy  sigma=1.335226
! Fit after  self-cal, rms=0.107874Jy  sigma=1.329024
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.587 mas, bmaj=12.71 mas, bpa=-1.458 degrees
! Estimated noise=1.46819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0381227 Jy
! Component: 100  -  total flux cleaned = 0.0606242 Jy
! Component: 150  -  total flux cleaned = 0.0744649 Jy
! Component: 200  -  total flux cleaned = 0.0830623 Jy
! Total flux subtracted in 200 components = 0.0830623 Jy
! Clean residual min=-0.008829 max=0.016258 Jy/beam
! Clean residual mean=-0.000168 rms=0.002590 Jy/beam
! Combined flux in latest and established models = 0.579647 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 106 components and 0.579647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092662Jy  sigma=1.103663
! Fit after  self-cal, rms=0.091428Jy  sigma=1.088781
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.587 x 12.71 at -1.458 degrees (North through East)
! Clean map  min=-0.0091011  max=0.34967 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.19     KP        0.94     LA        0.96     
!   NL        1.02     OV        0.99     PT        0.98     SC        0.93     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.97     KP        0.97     LA        0.98     
!   MK        0.90     NL        1.09     OV        0.97     PT        1.00     
!   SC        2.13     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.15     KP        0.95     LA        0.97     
!   NL        1.05     OV        1.03     PT        0.96     SC        0.98     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        0.96     KP        0.98     LA        0.99     
!   MK        0.95     NL        1.18     OV        1.02     PT        0.96     
!   SC        1.32     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        1.21     KP        1.00*    LA        0.78     
!   NL        1.00*    OV        1.03     PT        1.02     SC        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        1.01     KP        1.00*    LA        1.75     
!   MK        0.79     NL        1.00*    OV        0.99     PT        0.98     
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.24     KP        0.97     LA        0.99     
!   NL        1.00     OV        1.01     PT        0.99     SC        1.00     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.08     KP        0.98     LA        0.99     
!   MK        1.07     NL        1.25     OV        0.95     PT        0.96     
!   SC        1.26     
! 
! 
! Fit before self-cal, rms=0.091428Jy  sigma=1.088781
! Fit after  self-cal, rms=0.078931Jy  sigma=0.927725
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.599 mas, bmaj=13.36 mas, bpa=-2.612 degrees
! Estimated noise=1.48376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000538784 Jy
! Component: 100  -  total flux cleaned = 0.00078457 Jy
! Component: 150  -  total flux cleaned = 0.000995705 Jy
! Component: 200  -  total flux cleaned = 0.00108868 Jy
! Total flux subtracted in 200 components = 0.00108868 Jy
! Clean residual min=-0.006146 max=0.007657 Jy/beam
! Clean residual mean=-0.000068 rms=0.001677 Jy/beam
! Combined flux in latest and established models = 0.580736 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 114 components and 0.580736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078622Jy  sigma=0.921764
! Fit after  self-cal, rms=0.078813Jy  sigma=0.921068
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078813Jy  sigma=0.921068
! Fit after  self-cal, rms=0.077817Jy  sigma=0.906625
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.591 mas, bmaj=13.31 mas, bpa=-2.489 degrees
! Estimated noise=1.48468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000780477 Jy
! Component: 100  -  total flux cleaned = 0.000978629 Jy
! Component: 150  -  total flux cleaned = 0.00115012 Jy
! Component: 200  -  total flux cleaned = 0.00130374 Jy
! Total flux subtracted in 200 components = 0.00130374 Jy
! Clean residual min=-0.005550 max=0.007232 Jy/beam
! Clean residual mean=-0.000025 rms=0.001587 Jy/beam
! Combined flux in latest and established models = 0.582039 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 116 components and 0.582039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077628Jy  sigma=0.903085
! Fit after  self-cal, rms=0.077617Jy  sigma=0.902936
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.5, -12.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645067 Jy
! Component: 100  -  total flux cleaned = 0.00937156 Jy
! Component: 150  -  total flux cleaned = 0.00956258 Jy
! Component: 200  -  total flux cleaned = 0.00981578 Jy
! Total flux subtracted in 200 components = 0.00981578 Jy
! Clean residual min=-0.005420 max=0.005440 Jy/beam
! Clean residual mean=-0.000045 rms=0.001448 Jy/beam
! Combined flux in latest and established models = 0.591855 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 135 components and 0.591855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076963Jy  sigma=0.894548
! Fit after  self-cal, rms=0.076942Jy  sigma=0.893707
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076942Jy  sigma=0.893707
! Fit after  self-cal, rms=0.073192Jy  sigma=0.835154
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.579 mas, bmaj=13.3 mas, bpa=-2.284 degrees
! Estimated noise=1.47856 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192366 Jy
! Component: 100  -  total flux cleaned = 0.00249715 Jy
! Component: 150  -  total flux cleaned = 0.002633 Jy
! Component: 200  -  total flux cleaned = 0.00263213 Jy
! Total flux subtracted in 200 components = 0.00263213 Jy
! Clean residual min=-0.005132 max=0.004972 Jy/beam
! Clean residual mean=-0.000009 rms=0.001273 Jy/beam
! Combined flux in latest and established models = 0.594487 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 159 components and 0.594487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072990Jy  sigma=0.833105
! Fit after  self-cal, rms=0.073015Jy  sigma=0.832896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000639535 Jy
! Component: 100  -  total flux cleaned = 0.000639612 Jy
! Component: 150  -  total flux cleaned = 0.000638289 Jy
! Component: 200  -  total flux cleaned = 0.000638516 Jy
! Total flux subtracted in 200 components = 0.000638516 Jy
! Clean residual min=-0.005173 max=0.004969 Jy/beam
! Clean residual mean=-0.000010 rms=0.001266 Jy/beam
! Combined flux in latest and established models = 0.595126 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 169 components and 0.595126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072903Jy  sigma=0.831899
! Fit after  self-cal, rms=0.072915Jy  sigma=0.831859
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072915Jy  sigma=0.831859
! Fit after  self-cal, rms=0.072901Jy  sigma=0.831378
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.241 mas, bmaj=21.54 mas, bpa=1.266 degrees
! Estimated noise=1.84347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000895866 Jy
! Component: 100  -  total flux cleaned = 0.000957341 Jy
! Component: 150  -  total flux cleaned = 0.000911833 Jy
! Component: 200  -  total flux cleaned = 0.000912847 Jy
! Total flux subtracted in 200 components = 0.000912847 Jy
! Clean residual min=-0.004715 max=0.004690 Jy/beam
! Clean residual mean=-0.000012 rms=0.001368 Jy/beam
! Combined flux in latest and established models = 0.596039 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 180 components and 0.596039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072852Jy  sigma=0.831276
! Fit after  self-cal, rms=0.072848Jy  sigma=0.831051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000277065 Jy
! Component: 100  -  total flux cleaned = 0.000193719 Jy
! Component: 150  -  total flux cleaned = 0.000194774 Jy
! Component: 200  -  total flux cleaned = 0.000191756 Jy
! Total flux subtracted in 200 components = 0.000191756 Jy
! Clean residual min=-0.004683 max=0.004698 Jy/beam
! Clean residual mean=-0.000012 rms=0.001367 Jy/beam
! Combined flux in latest and established models = 0.596231 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 184 components and 0.596231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072837Jy  sigma=0.831242
! Fit after  self-cal, rms=0.072827Jy  sigma=0.831089
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.575 mas, bmaj=13.31 mas, bpa=-2.251 degrees
! Estimated noise=1.47592 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.575 x 13.31 at -2.251 degrees (North through East)
! Clean map  min=-0.0048757  max=0.34746 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.858 mas, bmaj=10.28 mas, bpa=-1.187 degrees
! Estimated noise=1.97763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.244009 Jy
! Component: 100  -  total flux cleaned = 0.350223 Jy
! Component: 150  -  total flux cleaned = 0.4138 Jy
! Component: 200  -  total flux cleaned = 0.454923 Jy
! Total flux subtracted in 200 components = 0.454923 Jy
! Clean residual min=-0.011095 max=0.022527 Jy/beam
! Clean residual mean=0.000009 rms=0.002893 Jy/beam
! Combined flux in latest and established models = 0.454924 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.454924 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.575 mas, bmaj=13.31 mas, bpa=-2.251 degrees
! Estimated noise=1.47592 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0531408 Jy
! Component: 100  -  total flux cleaned = 0.0823826 Jy
! Component: 150  -  total flux cleaned = 0.0996185 Jy
! Component: 200  -  total flux cleaned = 0.110643 Jy
! Total flux subtracted in 200 components = 0.110643 Jy
! Clean residual min=-0.005251 max=0.010106 Jy/beam
! Clean residual mean=0.000054 rms=0.001737 Jy/beam
! Combined flux in latest and established models = 0.565567 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 110 components and 0.565567 Jy
! Inverting map 
! Added new window around map position (-11, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00957336 Jy
! Component: 100  -  total flux cleaned = 0.0158279 Jy
! Component: 150  -  total flux cleaned = 0.0204635 Jy
! Component: 200  -  total flux cleaned = 0.0240011 Jy
! Total flux subtracted in 200 components = 0.0240011 Jy
! Clean residual min=-0.004682 max=0.004820 Jy/beam
! Clean residual mean=0.000005 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.589568 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 145 components and 0.589568 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.241 mas, bmaj=21.54 mas, bpa=1.266 degrees
! Estimated noise=1.84347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00352896 Jy
! Component: 100  -  total flux cleaned = 0.00492827 Jy
! Component: 150  -  total flux cleaned = 0.00537245 Jy
! Component: 200  -  total flux cleaned = 0.0055624 Jy
! Total flux subtracted in 200 components = 0.0055624 Jy
! Clean residual min=-0.004167 max=0.004606 Jy/beam
! Clean residual mean=-0.000007 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 0.59513 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170594 Jy
! Component: 100  -  total flux cleaned = 0.000325811 Jy
! Component: 150  -  total flux cleaned = 0.000467391 Jy
! Component: 200  -  total flux cleaned = 0.000555465 Jy
! Total flux subtracted in 200 components = 0.000555465 Jy
! Clean residual min=-0.004183 max=0.004593 Jy/beam
! Clean residual mean=-0.000009 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.595686 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 207 components and 0.595686 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.575 mas, bmaj=13.31 mas, bpa=-2.251 degrees
! Estimated noise=1.47592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106557 Jy
! Component: 100  -  total flux cleaned = 2.83891e-05 Jy
! Component: 150  -  total flux cleaned = 0.000152231 Jy
! Component: 200  -  total flux cleaned = 0.00026715 Jy
! Total flux subtracted in 200 components = 0.00026715 Jy
! Clean residual min=-0.004633 max=0.005062 Jy/beam
! Clean residual mean=-0.000008 rms=0.001214 Jy/beam
! Combined flux in latest and established models = 0.595953 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 229 components and 0.595953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072395Jy  sigma=0.826690
! Fit after  self-cal, rms=0.072401Jy  sigma=0.825461
wmodel J1316-3338_S_map.mod
! Writing 229 model components to file: J1316-3338_S_map.mod
wobs   J1316-3338_S_uvs.fits
! Writing UV FITS file: J1316-3338_S_uvs.fits
wwins  J1316-3338_S_map.win
! wwins: Wrote 4 windows to J1316-3338_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012593 Jy
! Component: 100  -  total flux cleaned = 0.00174386 Jy
! Component: 150  -  total flux cleaned = 0.00212758 Jy
! Component: 200  -  total flux cleaned = 0.00197994 Jy
! Component: 250  -  total flux cleaned = 0.00205123 Jy
! Component: 300  -  total flux cleaned = 0.00205143 Jy
! Component: 350  -  total flux cleaned = 0.00211974 Jy
! Component: 400  -  total flux cleaned = 0.00218664 Jy
! Component: 450  -  total flux cleaned = 0.00205875 Jy
! Component: 500  -  total flux cleaned = 0.00212317 Jy
! Component: 550  -  total flux cleaned = 0.00187566 Jy
! Component: 600  -  total flux cleaned = 0.00187592 Jy
! Component: 650  -  total flux cleaned = 0.00175591 Jy
! Component: 700  -  total flux cleaned = 0.00181546 Jy
! Component: 750  -  total flux cleaned = 0.00164116 Jy
! Component: 800  -  total flux cleaned = 0.00152747 Jy
! Component: 850  -  total flux cleaned = 0.00141539 Jy
! Component: 900  -  total flux cleaned = 0.00130425 Jy
! Component: 950  -  total flux cleaned = 0.00124982 Jy
! Component: 1000  -  total flux cleaned = 0.00119593 Jy
! Component: 1050  -  total flux cleaned = 0.00124853 Jy
! Component: 1100  -  total flux cleaned = 0.00114218 Jy
! Component: 1150  -  total flux cleaned = 0.00108968 Jy
! Component: 1200  -  total flux cleaned = 0.00124511 Jy
! Component: 1250  -  total flux cleaned = 0.00139853 Jy
! Component: 1300  -  total flux cleaned = 0.00139842 Jy
! Component: 1350  -  total flux cleaned = 0.00149906 Jy
! Component: 1400  -  total flux cleaned = 0.0014495 Jy
! Component: 1450  -  total flux cleaned = 0.00169571 Jy
! Component: 1500  -  total flux cleaned = 0.00164717 Jy
! Component: 1550  -  total flux cleaned = 0.00169549 Jy
! Component: 1600  -  total flux cleaned = 0.00183905 Jy
! Component: 1650  -  total flux cleaned = 0.00193479 Jy
! Component: 1700  -  total flux cleaned = 0.00193461 Jy
! Component: 1750  -  total flux cleaned = 0.00198117 Jy
! Component: 1800  -  total flux cleaned = 0.00207389 Jy
! Component: 1850  -  total flux cleaned = 0.00221194 Jy
! Component: 1900  -  total flux cleaned = 0.0023034 Jy
! Component: 1950  -  total flux cleaned = 0.00243924 Jy
! Component: 2000  -  total flux cleaned = 0.00257361 Jy
! Component: 2050  -  total flux cleaned = 0.00261818 Jy
! Component: 2100  -  total flux cleaned = 0.00270648 Jy
! Component: 2150  -  total flux cleaned = 0.00279379 Jy
! Component: 2200  -  total flux cleaned = 0.0027508 Jy
! Component: 2250  -  total flux cleaned = 0.002966 Jy
! Component: 2300  -  total flux cleaned = 0.00313706 Jy
! Component: 2350  -  total flux cleaned = 0.00313697 Jy
! Component: 2400  -  total flux cleaned = 0.00326376 Jy
! Component: 2450  -  total flux cleaned = 0.00334721 Jy
! Component: 2500  -  total flux cleaned = 0.00343073 Jy
! Component: 2550  -  total flux cleaned = 0.00363664 Jy
! Component: 2600  -  total flux cleaned = 0.0036364 Jy
! Component: 2650  -  total flux cleaned = 0.00371797 Jy
! Component: 2700  -  total flux cleaned = 0.00383894 Jy
! Component: 2750  -  total flux cleaned = 0.00387882 Jy
! Component: 2800  -  total flux cleaned = 0.0040782 Jy
! Component: 2850  -  total flux cleaned = 0.00403862 Jy
! Component: 2900  -  total flux cleaned = 0.00403916 Jy
! Component: 2950  -  total flux cleaned = 0.00411726 Jy
! Component: 3000  -  total flux cleaned = 0.00431102 Jy
! Component: 3050  -  total flux cleaned = 0.00431101 Jy
! Component: 3100  -  total flux cleaned = 0.00442594 Jy
! Component: 3150  -  total flux cleaned = 0.00454021 Jy
! Component: 3200  -  total flux cleaned = 0.00476685 Jy
! Component: 3250  -  total flux cleaned = 0.00469158 Jy
! Component: 3300  -  total flux cleaned = 0.00476644 Jy
! Component: 3350  -  total flux cleaned = 0.00480408 Jy
! Component: 3400  -  total flux cleaned = 0.00491452 Jy
! Component: 3450  -  total flux cleaned = 0.00502467 Jy
! Component: 3500  -  total flux cleaned = 0.00506086 Jy
! Component: 3550  -  total flux cleaned = 0.00513359 Jy
! Component: 3600  -  total flux cleaned = 0.00524172 Jy
! Component: 3650  -  total flux cleaned = 0.00524182 Jy
! Component: 3700  -  total flux cleaned = 0.00534864 Jy
! Component: 3750  -  total flux cleaned = 0.00545474 Jy
! Component: 3800  -  total flux cleaned = 0.00548983 Jy
! Component: 3850  -  total flux cleaned = 0.00541971 Jy
! Component: 3900  -  total flux cleaned = 0.00545456 Jy
! Component: 3950  -  total flux cleaned = 0.00555868 Jy
! Component: 4000  -  total flux cleaned = 0.00559359 Jy
! Component: 4050  -  total flux cleaned = 0.00569648 Jy
! Total flux subtracted in 4096 components = 0.00569659 Jy
! Clean residual min=-0.001974 max=0.002229 Jy/beam
! Clean residual mean=-0.000012 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.601649 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 508 components and 0.601649 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv121_uvs/J1316-3338_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.575 x 13.31 at -2.251 degrees (North through East)
! Clean map  min=-0.0037938  max=0.3502 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv121_uvs/J1316-3338_S_map.fits
wmodel /scr/pima/rv121_uvs/J1316-3338_S_map.mod
! Writing 508 model components to file: /scr/pima/rv121_uvs/J1316-3338_S_map.mod
wobs   /scr/pima/rv121_uvs/J1316-3338_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv121_uvs/J1316-3338_S_uvs.fits
wwins  /scr/pima/rv121_uvs/J1316-3338_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rv121_uvs/J1316-3338_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.3502 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00065814 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.563798 0.563798 1.1276 2.25519 4.51038 9.02077 18.0415 36.0831 72.1661
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.35 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  532.105 
quit
! Quitting program
! Log file /scr/pima/rv121_uvs/J1316-3338_S_dfm.log closed on Sat Jul 28 00:11:19 2018