! Started logfile: /scr/pima/rv121_uvs/J1230+1223_S_dfm.log on Sat Jul 28 00:10:54 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv121_uvs/J1230+1223_S_uva.fits ! Reading UV FITS file: /scr/pima/rv121_uvs/J1230+1223_S_uva.fits ! AN table 1: 4 integrations on 6 of 6 possible baselines. ! AN table 2: 85 integrations on 28 of 28 possible baselines. ! AN table 3: 3 integrations on 45 of 45 possible baselines. ! AN table 4: 2 integrations on 6 of 6 possible baselines. ! AN table 5: 3 integrations on 6 of 6 possible baselines. ! AN table 6: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.338096 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1230+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 6152 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1230+1223_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 364 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 235 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 364 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 235 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 410 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 298 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 364 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 235 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.451133Jy sigma=16.589577 ! Fit after self-cal, rms=0.635405Jy sigma=6.738879 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=2.757 mas, bpa=-12.46 degrees ! Estimated noise=1.20012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.579835 Jy ! Component: 100 - total flux cleaned = 0.839615 Jy ! Total flux subtracted in 100 components = 0.839615 Jy ! Clean residual min=-0.044169 max=0.180566 Jy/beam ! Clean residual mean=0.000160 rms=0.012871 Jy/beam ! Combined flux in latest and established models = 0.839615 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.839615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.523680Jy sigma=5.080503 ! Fit after self-cal, rms=0.521236Jy sigma=5.067974 ! Inverting map ! Added new window around map position (-3.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185637 Jy ! Component: 100 - total flux cleaned = 0.305351 Jy ! Total flux subtracted in 100 components = 0.305351 Jy ! Clean residual min=-0.032780 max=0.097272 Jy/beam ! Clean residual mean=0.000103 rms=0.009297 Jy/beam ! Combined flux in latest and established models = 1.14497 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 1.14497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396927Jy sigma=3.731530 ! Fit after self-cal, rms=0.393786Jy sigma=3.661905 ! Inverting map ! Added new window around map position (-7, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104952 Jy ! Component: 100 - total flux cleaned = 0.177965 Jy ! Total flux subtracted in 100 components = 0.177965 Jy ! Clean residual min=-0.028354 max=0.081539 Jy/beam ! Clean residual mean=0.000070 rms=0.007530 Jy/beam ! Combined flux in latest and established models = 1.32293 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 1.32293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337849Jy sigma=3.117720 ! Fit after self-cal, rms=0.336334Jy sigma=3.081790 ! Inverting map ! Added new window around map position (-19, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826282 Jy ! Component: 100 - total flux cleaned = 0.140316 Jy ! Total flux subtracted in 100 components = 0.140316 Jy ! Clean residual min=-0.026349 max=0.050313 Jy/beam ! Clean residual mean=0.000056 rms=0.006230 Jy/beam ! Combined flux in latest and established models = 1.46325 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 1.46325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298056Jy sigma=2.689284 ! Fit after self-cal, rms=0.296508Jy sigma=2.653883 ! Inverting map ! Added new window around map position (-11.5, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0593997 Jy ! Component: 100 - total flux cleaned = 0.106037 Jy ! Total flux subtracted in 100 components = 0.106037 Jy ! Clean residual min=-0.024269 max=0.041355 Jy/beam ! Clean residual mean=0.000042 rms=0.005383 Jy/beam ! Combined flux in latest and established models = 1.56928 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 93 components and 1.56928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270065Jy sigma=2.387389 ! Fit after self-cal, rms=0.269516Jy sigma=2.370950 ! Inverting map ! Added new window around map position (-24, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471447 Jy ! Component: 100 - total flux cleaned = 0.0858402 Jy ! Total flux subtracted in 100 components = 0.0858402 Jy ! Clean residual min=-0.022788 max=0.037649 Jy/beam ! Clean residual mean=0.000034 rms=0.004791 Jy/beam ! Combined flux in latest and established models = 1.65512 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 105 components and 1.65512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250983Jy sigma=2.186194 ! Fit after self-cal, rms=0.250707Jy sigma=2.173458 ! Inverting map ! Added new window around map position (-15.5, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039829 Jy ! Component: 100 - total flux cleaned = 0.0724044 Jy ! Total flux subtracted in 100 components = 0.0724044 Jy ! Clean residual min=-0.021702 max=0.033050 Jy/beam ! Clean residual mean=0.000027 rms=0.004323 Jy/beam ! Combined flux in latest and established models = 1.72753 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 121 components and 1.72753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235707Jy sigma=2.029211 ! Fit after self-cal, rms=0.235668Jy sigma=2.021279 ! Inverting map ! Added new window around map position (4, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336617 Jy ! Component: 100 - total flux cleaned = 0.0619158 Jy ! Total flux subtracted in 100 components = 0.0619158 Jy ! Clean residual min=-0.019872 max=0.024911 Jy/beam ! Clean residual mean=0.000020 rms=0.003948 Jy/beam ! Combined flux in latest and established models = 1.78944 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 136 components and 1.78944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224294Jy sigma=1.912472 ! Fit after self-cal, rms=0.224055Jy sigma=1.909744 ! Inverting map ! Added new window around map position (-29, 10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284352 Jy ! Component: 100 - total flux cleaned = 0.052356 Jy ! Total flux subtracted in 100 components = 0.052356 Jy ! Clean residual min=-0.018779 max=0.017770 Jy/beam ! Clean residual mean=0.000014 rms=0.003673 Jy/beam ! Combined flux in latest and established models = 1.8418 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 148 components and 1.8418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215295Jy sigma=1.824902 ! Fit after self-cal, rms=0.215141Jy sigma=1.822037 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=2.829 mas, bpa=-28.08 degrees ! Estimated noise=0.979847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038519 Jy ! Component: 100 - total flux cleaned = 0.0697705 Jy ! Component: 150 - total flux cleaned = 0.096769 Jy ! Component: 200 - total flux cleaned = 0.120334 Jy ! Total flux subtracted in 200 components = 0.120334 Jy ! Clean residual min=-0.022202 max=0.019962 Jy/beam ! Clean residual mean=0.000027 rms=0.004825 Jy/beam ! Combined flux in latest and established models = 1.96213 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 191 components and 1.96213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196346Jy sigma=1.686605 ! Fit after self-cal, rms=0.195876Jy sigma=1.678488 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.76 x 2.829 at -28.08 degrees (North through East) ! Clean map min=-0.020972 max=0.66437 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.04 SC 0.90 WZ 1.27 ! ! A total of 60 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HH 1.16 HN 1.03 NL 1.02 ! NY 0.90 ON 0.88 SC 0.91 WZ 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.88 HN 1.10 KP 1.01 ! LA 0.97 NL 0.95 NY 0.97 OV 1.10 ! PT 0.99 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 MK 1.11 OV 0.96 WZ 1.12 ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.99 MK 0.86 NY 0.97 OV 1.15 ! ! A total of 39 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.98 HN 1.05 KP 1.04 ! LA 0.88 MK 1.00 NL 0.98 OV 1.03 ! PT 1.08 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.05 SC 0.92 WZ 1.04 ! ! A total of 60 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 HH 1.11 HN 1.01 NL 1.03 ! NY 0.98 ON 0.85 SC 0.91 WZ 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.93 HN 1.09 KP 0.96 ! LA 0.99 NL 0.95 NY 1.01 OV 1.04 ! PT 0.99 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 MK 1.08 OV 0.94 WZ 1.22 ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.99 MK 0.89 NY 1.20 OV 1.03 ! ! A total of 39 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.99 HN 1.03 KP 1.00 ! LA 0.89 MK 1.02 NL 0.98 OV 1.04 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 66 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 HH 1.06 HN 1.02 NL 1.00* ! NY 1.01 ON 0.89 SC 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.89 HN 1.11 KP 1.00* ! LA 0.96 NL 1.00* NY 0.95 OV 1.07 ! PT 1.01 SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 MK 0.83 OV 1.00 WZ 1.28 ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.96 MK 1.30 NY 1.08 OV 1.11 ! ! A total of 84 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.07 FD 1.02 HN 1.01 KP 1.00* ! LA 0.94 MK 1.09 NL 1.00* OV 1.02 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.14 SC 0.88 WZ 1.01 ! ! A total of 60 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HH 1.00 HN 0.99 NL 1.05 ! NY 1.03 ON 0.88 SC 0.97 WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.90 HN 1.11 KP 0.99 ! LA 0.95 NL 0.96 NY 0.97 OV 1.02 ! PT 1.00 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 MK 1.11 OV 0.92 WZ 1.14 ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.16 MK 0.75 NY 0.99 OV 1.25 ! ! A total of 39 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.98 HN 1.04 KP 0.99 ! LA 0.90 MK 1.00 NL 0.96 OV 1.02 ! PT 1.08 SC 0.99 ! ! ! Fit before self-cal, rms=0.195876Jy sigma=1.678488 ! Fit after self-cal, rms=0.149164Jy sigma=1.428873 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=2.875 mas, bpa=-10.93 degrees ! Estimated noise=1.0047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-68, 25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020456 Jy ! Component: 100 - total flux cleaned = 0.0359366 Jy ! Component: 150 - total flux cleaned = 0.0486433 Jy ! Component: 200 - total flux cleaned = 0.0593077 Jy ! Total flux subtracted in 200 components = 0.0593077 Jy ! Clean residual min=-0.011339 max=0.015071 Jy/beam ! Clean residual mean=-0.000007 rms=0.002999 Jy/beam ! Combined flux in latest and established models = 2.02144 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 223 components and 2.02144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143726Jy sigma=1.376209 ! Fit after self-cal, rms=0.143283Jy sigma=1.370642 ! Inverting map ! Added new window around map position (-34.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159269 Jy ! Component: 100 - total flux cleaned = 0.0269374 Jy ! Component: 150 - total flux cleaned = 0.0363293 Jy ! Component: 200 - total flux cleaned = 0.0432897 Jy ! Total flux subtracted in 200 components = 0.0432897 Jy ! Clean residual min=-0.010207 max=0.011388 Jy/beam ! Clean residual mean=-0.000012 rms=0.002773 Jy/beam ! Combined flux in latest and established models = 2.06473 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 255 components and 2.06473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139949Jy sigma=1.339627 ! Fit after self-cal, rms=0.139601Jy sigma=1.336109 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139601Jy sigma=1.336109 ! Fit after self-cal, rms=0.124566Jy sigma=1.147793 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=2.851 mas, bpa=-5.629 degrees ! Estimated noise=1.00404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109951 Jy ! Component: 100 - total flux cleaned = 0.0197432 Jy ! Component: 150 - total flux cleaned = 0.0271271 Jy ! Component: 200 - total flux cleaned = 0.0335495 Jy ! Total flux subtracted in 200 components = 0.0335495 Jy ! Clean residual min=-0.008558 max=0.008882 Jy/beam ! Clean residual mean=-0.000005 rms=0.002034 Jy/beam ! Combined flux in latest and established models = 2.09828 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 280 components and 2.09828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122666Jy sigma=1.126833 ! Fit after self-cal, rms=0.122721Jy sigma=1.124936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00877708 Jy ! Component: 100 - total flux cleaned = 0.0150477 Jy ! Component: 150 - total flux cleaned = 0.020103 Jy ! Component: 200 - total flux cleaned = 0.0240688 Jy ! Total flux subtracted in 200 components = 0.0240688 Jy ! Clean residual min=-0.007792 max=0.008721 Jy/beam ! Clean residual mean=-0.000008 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 2.12235 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 296 components and 2.12235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121560Jy sigma=1.112061 ! Fit after self-cal, rms=0.121497Jy sigma=1.111094 ! Inverting map ! Added new window around map position (-82.5, 29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00878029 Jy ! Component: 100 - total flux cleaned = 0.0143968 Jy ! Component: 150 - total flux cleaned = 0.0187483 Jy ! Component: 200 - total flux cleaned = 0.0223512 Jy ! Total flux subtracted in 200 components = 0.0223512 Jy ! Clean residual min=-0.006985 max=0.007576 Jy/beam ! Clean residual mean=-0.000009 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 2.1447 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 324 components and 2.1447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120565Jy sigma=1.099009 ! Fit after self-cal, rms=0.120554Jy sigma=1.098164 ! Inverting map ! Added new window around map position (-62.5, 18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766599 Jy ! Component: 100 - total flux cleaned = 0.012482 Jy ! Component: 150 - total flux cleaned = 0.0160664 Jy ! Component: 200 - total flux cleaned = 0.0195441 Jy ! Total flux subtracted in 200 components = 0.0195441 Jy ! Clean residual min=-0.006304 max=0.006744 Jy/beam ! Clean residual mean=-0.000010 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 2.16424 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 344 components and 2.16424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119869Jy sigma=1.087857 ! Fit after self-cal, rms=0.119832Jy sigma=1.087131 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119832Jy sigma=1.087131 ! Fit after self-cal, rms=0.114129Jy sigma=1.007062 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=2.846 mas, bpa=-3.317 degrees ! Estimated noise=1.00339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589882 Jy ! Component: 100 - total flux cleaned = 0.0108809 Jy ! Component: 150 - total flux cleaned = 0.0153459 Jy ! Component: 200 - total flux cleaned = 0.0194149 Jy ! Total flux subtracted in 200 components = 0.0194149 Jy ! Clean residual min=-0.005248 max=0.005858 Jy/beam ! Clean residual mean=-0.000001 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 2.18366 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 378 components and 2.18366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113508Jy sigma=0.998891 ! Fit after self-cal, rms=0.113479Jy sigma=0.998411 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417744 Jy ! Component: 100 - total flux cleaned = 0.00796059 Jy ! Component: 150 - total flux cleaned = 0.0113094 Jy ! Component: 200 - total flux cleaned = 0.0141644 Jy ! Total flux subtracted in 200 components = 0.0141644 Jy ! Clean residual min=-0.005211 max=0.005654 Jy/beam ! Clean residual mean=-0.000002 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 2.19782 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 390 components and 2.19782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113124Jy sigma=0.993777 ! Fit after self-cal, rms=0.113107Jy sigma=0.993566 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113107Jy sigma=0.993566 ! Fit after self-cal, rms=0.112912Jy sigma=0.990903 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.094 mas, bmaj=8.527 mas, bpa=-22.56 degrees ! Estimated noise=1.45584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950642 Jy ! Component: 100 - total flux cleaned = 0.0167816 Jy ! Component: 150 - total flux cleaned = 0.022876 Jy ! Component: 200 - total flux cleaned = 0.028054 Jy ! Total flux subtracted in 200 components = 0.028054 Jy ! Clean residual min=-0.007943 max=0.009042 Jy/beam ! Clean residual mean=-0.000008 rms=0.002447 Jy/beam ! Combined flux in latest and established models = 2.22588 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 424 components and 2.22588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112617Jy sigma=0.986794 ! Fit after self-cal, rms=0.112594Jy sigma=0.985827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536525 Jy ! Component: 100 - total flux cleaned = 0.00910355 Jy ! Component: 150 - total flux cleaned = 0.0123549 Jy ! Component: 200 - total flux cleaned = 0.0152002 Jy ! Total flux subtracted in 200 components = 0.0152002 Jy ! Clean residual min=-0.007856 max=0.008514 Jy/beam ! Clean residual mean=-0.000011 rms=0.002353 Jy/beam ! Combined flux in latest and established models = 2.24108 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 442 components and 2.24108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112553Jy sigma=0.985290 ! Fit after self-cal, rms=0.112565Jy sigma=0.984943 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=2.847 mas, bpa=-3.4 degrees ! Estimated noise=1.00326 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.691 x 2.847 at -3.4 degrees (North through East) ! Clean map min=-0.0048259 max=0.63617 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112565Jy sigma=0.984943 ! Fit after self-cal, rms=0.103643Jy sigma=0.867677 ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=2.851 mas, bpa=-3.799 degrees ! Estimated noise=1.00433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362098 Jy ! Component: 100 - total flux cleaned = 0.0066197 Jy ! Component: 150 - total flux cleaned = 0.00897401 Jy ! Component: 200 - total flux cleaned = 0.0110338 Jy ! Total flux subtracted in 200 components = 0.0110338 Jy ! Clean residual min=-0.004685 max=0.004956 Jy/beam ! Clean residual mean=-0.000003 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 2.25211 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 464 components and 2.25211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103365Jy sigma=0.864375 ! Fit after self-cal, rms=0.103346Jy sigma=0.864217 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220592 Jy ! Component: 100 - total flux cleaned = 0.00401156 Jy ! Component: 150 - total flux cleaned = 0.0051941 Jy ! Component: 200 - total flux cleaned = 0.0061556 Jy ! Total flux subtracted in 200 components = 0.0061556 Jy ! Clean residual min=-0.004728 max=0.004867 Jy/beam ! Clean residual mean=-0.000004 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 2.25827 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 476 components and 2.25827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103193Jy sigma=0.862313 ! Fit after self-cal, rms=0.103180Jy sigma=0.862249 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103180Jy sigma=0.862249 ! Fit after self-cal, rms=0.103207Jy sigma=0.861715 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=2.793 mas, bpa=-9.461 degrees ! Estimated noise=1.23158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.563629 Jy ! Component: 100 - total flux cleaned = 0.838693 Jy ! Component: 150 - total flux cleaned = 1.02272 Jy ! Component: 200 - total flux cleaned = 1.16286 Jy ! Total flux subtracted in 200 components = 1.16286 Jy ! Clean residual min=-0.030372 max=0.082814 Jy/beam ! Clean residual mean=0.000099 rms=0.009098 Jy/beam ! Combined flux in latest and established models = 1.16286 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 1.16286 Jy ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=2.854 mas, bpa=-4.462 degrees ! Estimated noise=1.00401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151409 Jy ! Component: 100 - total flux cleaned = 0.269929 Jy ! Component: 150 - total flux cleaned = 0.365384 Jy ! Component: 200 - total flux cleaned = 0.444105 Jy ! Total flux subtracted in 200 components = 0.444105 Jy ! Clean residual min=-0.022585 max=0.047650 Jy/beam ! Clean residual mean=0.000076 rms=0.007018 Jy/beam ! Combined flux in latest and established models = 1.60697 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 96 components and 1.60697 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657981 Jy ! Component: 100 - total flux cleaned = 0.121702 Jy ! Component: 150 - total flux cleaned = 0.169656 Jy ! Component: 200 - total flux cleaned = 0.211008 Jy ! Total flux subtracted in 200 components = 0.211008 Jy ! Clean residual min=-0.014971 max=0.026567 Jy/beam ! Clean residual mean=0.000045 rms=0.004491 Jy/beam ! Combined flux in latest and established models = 1.81798 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 146 components and 1.81798 Jy ! Inverting map ! Added new window around map position (-19.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362073 Jy ! Component: 100 - total flux cleaned = 0.0681016 Jy ! Component: 150 - total flux cleaned = 0.0963473 Jy ! Component: 200 - total flux cleaned = 0.121618 Jy ! Total flux subtracted in 200 components = 0.121618 Jy ! Clean residual min=-0.011590 max=0.016915 Jy/beam ! Clean residual mean=0.000028 rms=0.003242 Jy/beam ! Combined flux in latest and established models = 1.93959 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 196 components and 1.93959 Jy ! Inverting map ! Added new window around map position (-25.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227821 Jy ! Component: 100 - total flux cleaned = 0.0432298 Jy ! Component: 150 - total flux cleaned = 0.0618729 Jy ! Component: 200 - total flux cleaned = 0.0789843 Jy ! Total flux subtracted in 200 components = 0.0789843 Jy ! Clean residual min=-0.009286 max=0.011549 Jy/beam ! Clean residual mean=0.000019 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 2.01858 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 243 components and 2.01858 Jy ! Inverting map ! Added new window around map position (-39, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158328 Jy ! Component: 100 - total flux cleaned = 0.0304419 Jy ! Component: 150 - total flux cleaned = 0.0439747 Jy ! Component: 200 - total flux cleaned = 0.0565392 Jy ! Total flux subtracted in 200 components = 0.0565392 Jy ! Clean residual min=-0.007583 max=0.008768 Jy/beam ! Clean residual mean=0.000013 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 2.07512 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 292 components and 2.07512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.091 mas, bmaj=8.525 mas, bpa=-22.09 degrees ! Estimated noise=1.45644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276257 Jy ! Component: 100 - total flux cleaned = 0.0501122 Jy ! Component: 150 - total flux cleaned = 0.069124 Jy ! Component: 200 - total flux cleaned = 0.0854318 Jy ! Total flux subtracted in 200 components = 0.0854318 Jy ! Clean residual min=-0.009557 max=0.011104 Jy/beam ! Clean residual mean=0.000012 rms=0.003308 Jy/beam ! Combined flux in latest and established models = 2.16055 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141231 Jy ! Component: 100 - total flux cleaned = 0.0264412 Jy ! Component: 150 - total flux cleaned = 0.037242 Jy ! Component: 200 - total flux cleaned = 0.0467612 Jy ! Total flux subtracted in 200 components = 0.0467612 Jy ! Clean residual min=-0.008444 max=0.009540 Jy/beam ! Clean residual mean=0.000000 rms=0.002637 Jy/beam ! Combined flux in latest and established models = 2.20731 Jy ! Adding 207 model components to the UV plane model. ! The established model now contains 459 components and 2.20731 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=2.854 mas, bpa=-4.462 degrees ! Estimated noise=1.00401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649751 Jy ! Component: 100 - total flux cleaned = 0.0117575 Jy ! Component: 150 - total flux cleaned = 0.0164302 Jy ! Component: 200 - total flux cleaned = 0.0206902 Jy ! Total flux subtracted in 200 components = 0.0206902 Jy ! Clean residual min=-0.005633 max=0.005570 Jy/beam ! Clean residual mean=0.000000 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 2.228 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 491 components and 2.228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103914Jy sigma=0.867013 ! Fit after self-cal, rms=0.103571Jy sigma=0.862300 wmodel J1230+1223_S_map.mod ! Writing 491 model components to file: J1230+1223_S_map.mod wobs J1230+1223_S_uvs.fits ! Writing UV FITS file: J1230+1223_S_uvs.fits wwins J1230+1223_S_map.win ! wwins: Wrote 18 windows to J1230+1223_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000993985 Jy ! Component: 100 - total flux cleaned = 0.00201069 Jy ! Component: 150 - total flux cleaned = 0.00306489 Jy ! Component: 200 - total flux cleaned = 0.00382472 Jy ! Component: 250 - total flux cleaned = 0.00447949 Jy ! Component: 300 - total flux cleaned = 0.00479832 Jy ! Component: 350 - total flux cleaned = 0.00518889 Jy ! Component: 400 - total flux cleaned = 0.00580158 Jy ! Component: 450 - total flux cleaned = 0.00595139 Jy ! Component: 500 - total flux cleaned = 0.00617468 Jy ! Component: 550 - total flux cleaned = 0.00653835 Jy ! Component: 600 - total flux cleaned = 0.00668162 Jy ! Component: 650 - total flux cleaned = 0.00696463 Jy ! Component: 700 - total flux cleaned = 0.00710531 Jy ! Component: 750 - total flux cleaned = 0.00731223 Jy ! Component: 800 - total flux cleaned = 0.00744855 Jy ! Component: 850 - total flux cleaned = 0.00778373 Jy ! Component: 900 - total flux cleaned = 0.00771671 Jy ! Component: 950 - total flux cleaned = 0.00791467 Jy ! Component: 1000 - total flux cleaned = 0.00798032 Jy ! Component: 1050 - total flux cleaned = 0.0081739 Jy ! Component: 1100 - total flux cleaned = 0.0084281 Jy ! Component: 1150 - total flux cleaned = 0.00861766 Jy ! Component: 1200 - total flux cleaned = 0.00868061 Jy ! Component: 1250 - total flux cleaned = 0.00892758 Jy ! Component: 1300 - total flux cleaned = 0.00892736 Jy ! Component: 1350 - total flux cleaned = 0.00910951 Jy ! Component: 1400 - total flux cleaned = 0.0093511 Jy ! Component: 1450 - total flux cleaned = 0.00947002 Jy ! Component: 1500 - total flux cleaned = 0.00982578 Jy ! Component: 1550 - total flux cleaned = 0.00994331 Jy ! Component: 1600 - total flux cleaned = 0.00994337 Jy ! Component: 1650 - total flux cleaned = 0.010349 Jy ! Component: 1700 - total flux cleaned = 0.0106375 Jy ! Component: 1750 - total flux cleaned = 0.010751 Jy ! Component: 1800 - total flux cleaned = 0.0111484 Jy ! Component: 1850 - total flux cleaned = 0.0112599 Jy ! Component: 1900 - total flux cleaned = 0.0113717 Jy ! Component: 1950 - total flux cleaned = 0.0118159 Jy ! Component: 2000 - total flux cleaned = 0.0120366 Jy ! Component: 2050 - total flux cleaned = 0.0118182 Jy ! Component: 2100 - total flux cleaned = 0.0124719 Jy ! Component: 2150 - total flux cleaned = 0.0123096 Jy ! Component: 2200 - total flux cleaned = 0.0126861 Jy ! Component: 2250 - total flux cleaned = 0.012633 Jy ! Component: 2300 - total flux cleaned = 0.0130577 Jy ! Component: 2350 - total flux cleaned = 0.0130575 Jy ! Component: 2400 - total flux cleaned = 0.013005 Jy ! Component: 2450 - total flux cleaned = 0.0131097 Jy ! Component: 2500 - total flux cleaned = 0.0132654 Jy ! Component: 2550 - total flux cleaned = 0.0133688 Jy ! Component: 2600 - total flux cleaned = 0.0134203 Jy ! Component: 2650 - total flux cleaned = 0.0134202 Jy ! Component: 2700 - total flux cleaned = 0.0135215 Jy ! Component: 2750 - total flux cleaned = 0.0138238 Jy ! Component: 2800 - total flux cleaned = 0.0138734 Jy ! Component: 2850 - total flux cleaned = 0.0136738 Jy ! Component: 2900 - total flux cleaned = 0.013773 Jy ! Component: 2950 - total flux cleaned = 0.0137232 Jy ! Component: 3000 - total flux cleaned = 0.0137724 Jy ! Component: 3050 - total flux cleaned = 0.0140168 Jy ! Component: 3100 - total flux cleaned = 0.0139687 Jy ! Component: 3150 - total flux cleaned = 0.0139686 Jy ! Component: 3200 - total flux cleaned = 0.0139688 Jy ! Component: 3250 - total flux cleaned = 0.0140167 Jy ! Component: 3300 - total flux cleaned = 0.0141121 Jy ! Component: 3350 - total flux cleaned = 0.0142069 Jy ! Component: 3400 - total flux cleaned = 0.0141131 Jy ! Component: 3450 - total flux cleaned = 0.0143479 Jy ! Component: 3500 - total flux cleaned = 0.0141611 Jy ! Component: 3550 - total flux cleaned = 0.0143472 Jy ! Component: 3600 - total flux cleaned = 0.0143469 Jy ! Component: 3650 - total flux cleaned = 0.0146227 Jy ! Component: 3700 - total flux cleaned = 0.0143938 Jy ! Component: 3750 - total flux cleaned = 0.0144395 Jy ! Component: 3800 - total flux cleaned = 0.0144852 Jy ! Component: 3850 - total flux cleaned = 0.0146661 Jy ! Component: 3900 - total flux cleaned = 0.014711 Jy ! Component: 3950 - total flux cleaned = 0.0147109 Jy ! Component: 4000 - total flux cleaned = 0.0147106 Jy ! Component: 4050 - total flux cleaned = 0.0147994 Jy ! Total flux subtracted in 4096 components = 0.0148436 Jy ! Clean residual min=-0.002634 max=0.002930 Jy/beam ! Clean residual mean=-0.000000 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 2.24285 Jy keep ! Adding 367 model components to the UV plane model. ! The established model now contains 858 components and 2.24285 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv121_uvs/J1230+1223_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.69 x 2.854 at -4.462 degrees (North through East) ! Clean map min=-0.0034879 max=0.64031 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv121_uvs/J1230+1223_S_map.fits wmodel /scr/pima/rv121_uvs/J1230+1223_S_map.mod ! Writing 858 model components to file: /scr/pima/rv121_uvs/J1230+1223_S_map.mod wobs /scr/pima/rv121_uvs/J1230+1223_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv121_uvs/J1230+1223_S_uvs.fits wwins /scr/pima/rv121_uvs/J1230+1223_S_map.win ! wwins: Wrote 19 windows to /scr/pima/rv121_uvs/J1230+1223_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.640314 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000822512 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.385363 0.385363 0.770727 1.54145 3.08291 6.16581 12.3316 24.6632 49.3265 98.653 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.64 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 778.486 quit ! Quitting program ! Log file /scr/pima/rv121_uvs/J1230+1223_S_dfm.log closed on Sat Jul 28 00:11:00 2018