! Started logfile: /scr/pima/rv121_uvs/J0836-2016_X_dfm.log on Sat Jul 28 00:39:53 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv121_uvs/J0836-2016_X_uva.fits ! Reading UV FITS file: /scr/pima/rv121_uvs/J0836-2016_X_uva.fits ! AN table 1: 63 integrations on 6 of 6 possible baselines. ! AN table 2: 7 integrations on 1 of 1 possible baselines. ! AN table 3: 13 integrations on 36 of 36 possible baselines. ! AN table 4: 7 integrations on 28 of 28 possible baselines. ! AN table 5: 26 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.445132 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0836-2016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 3164 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0836-2016_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 94 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 94 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 94 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 94 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.517137Jy sigma=20.339399 ! Fit after self-cal, rms=0.260376Jy sigma=3.421587 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8451 mas, bmaj=1.227 mas, bpa=-2.217 degrees ! Estimated noise=1.54688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.819823 Jy ! Component: 100 - total flux cleaned = 1.04441 Jy ! Total flux subtracted in 100 components = 1.04441 Jy ! Clean residual min=-0.025736 max=0.097327 Jy/beam ! Clean residual mean=0.000292 rms=0.006747 Jy/beam ! Combined flux in latest and established models = 1.04441 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.04441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217183Jy sigma=2.848154 ! Fit after self-cal, rms=0.217164Jy sigma=2.847700 ! Inverting map ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103967 Jy ! Component: 100 - total flux cleaned = 0.156611 Jy ! Total flux subtracted in 100 components = 0.156611 Jy ! Clean residual min=-0.016211 max=0.032778 Jy/beam ! Clean residual mean=0.000141 rms=0.004063 Jy/beam ! Combined flux in latest and established models = 1.20102 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 1.20102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133543Jy sigma=1.573525 ! Fit after self-cal, rms=0.133503Jy sigma=1.572884 ! Inverting map ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-1, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326029 Jy ! Component: 100 - total flux cleaned = 0.0516529 Jy ! Total flux subtracted in 100 components = 0.0516529 Jy ! Clean residual min=-0.016418 max=0.027401 Jy/beam ! Clean residual mean=0.000091 rms=0.003676 Jy/beam ! Combined flux in latest and established models = 1.25267 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 1.25267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120065Jy sigma=1.350262 ! Fit after self-cal, rms=0.119728Jy sigma=1.344543 ! Inverting map ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-3, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258917 Jy ! Component: 100 - total flux cleaned = 0.0399393 Jy ! Total flux subtracted in 100 components = 0.0399393 Jy ! Clean residual min=-0.017135 max=0.020701 Jy/beam ! Clean residual mean=0.000053 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 1.29261 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 1.29261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112695Jy sigma=1.240696 ! Fit after self-cal, rms=0.111709Jy sigma=1.223957 ! Inverting map ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.073 mas, bmaj=1.736 mas, bpa=-7.459 degrees ! Estimated noise=1.16734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189444 Jy ! Component: 100 - total flux cleaned = 0.0301711 Jy ! Component: 150 - total flux cleaned = 0.0375899 Jy ! Component: 200 - total flux cleaned = 0.0408006 Jy ! Total flux subtracted in 200 components = 0.0408006 Jy ! Clean residual min=-0.010429 max=0.013613 Jy/beam ! Clean residual mean=0.000014 rms=0.002389 Jy/beam ! Combined flux in latest and established models = 1.33341 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 1.33341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108399Jy sigma=1.161898 ! Fit after self-cal, rms=0.107937Jy sigma=1.152977 ! Inverting map ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-5.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130476 Jy ! Component: 100 - total flux cleaned = 0.0161015 Jy ! Component: 150 - total flux cleaned = 0.017815 Jy ! Component: 200 - total flux cleaned = 0.0184612 Jy ! Total flux subtracted in 200 components = 0.0184612 Jy ! Clean residual min=-0.009902 max=0.012052 Jy/beam ! Clean residual mean=-0.000014 rms=0.002195 Jy/beam ! Combined flux in latest and established models = 1.35187 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 1.35187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105685Jy sigma=1.125568 ! Fit after self-cal, rms=0.105517Jy sigma=1.123436 ! Inverting map ! Your choice of large map pixels excluded 0.0899% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.073 x 1.736 at -7.459 degrees (North through East) ! Clean map min=-0.0082258 max=1.0876 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.87 ON 0.96 SC 1.08 WZ 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 HN 1.06 KP 0.98 ! LA 1.00 NL 0.98 OV 0.99 PT 0.99 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 KP 0.98 LA 1.00 MK 1.00 ! NL 0.99 OV 0.99 PT 0.98 SC 1.04 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.98 KP 0.99 LA 0.99 ! MK 0.95 NL 0.99 OV 0.98 PT 0.98 ! ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.88 ON 1.03 SC 1.14 WZ 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.99 HN 1.16 KP 0.99 ! LA 0.99 NL 0.98 OV 0.98 PT 1.00 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 KP 0.98 LA 1.00 MK 1.00 ! NL 1.01 OV 0.98 PT 0.98 SC 1.04 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 0.97 KP 1.00 LA 1.00 ! MK 0.95 NL 1.00 OV 0.98 PT 0.99 ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 1.08 ON 1.13 SC 1.07 WZ 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 1.11 KP 1.01 ! LA 1.01 NL 1.01 OV 0.97 PT 1.03 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.00 LA 1.02 MK 1.01 ! NL 1.01 OV 0.99 PT 1.00 SC 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.99 KP 1.01 LA 1.02 ! MK 0.94 NL 1.02 OV 0.99 PT 1.00 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 1.04 ON 1.01 SC 1.10 WZ 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.01 HN 1.12 KP 1.01 ! LA 1.02 NL 1.03 OV 1.01 PT 1.02 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 1.01 LA 1.01 MK 0.96 ! NL 1.01 OV 1.00 PT 1.01 SC 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.99 KP 1.02 LA 1.02 ! MK 0.97 NL 1.02 OV 0.99 PT 1.00 ! ! ! Fit before self-cal, rms=0.105517Jy sigma=1.123436 ! Fit after self-cal, rms=0.069371Jy sigma=0.820435 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.128 mas, bmaj=2.616 mas, bpa=-5.565 degrees ! Estimated noise=1.20802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.2, -31.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045034 Jy ! Component: 100 - total flux cleaned = 0.00544749 Jy ! Component: 150 - total flux cleaned = 0.00577029 Jy ! Component: 200 - total flux cleaned = 0.00591548 Jy ! Total flux subtracted in 200 components = 0.00591548 Jy ! Clean residual min=-0.005094 max=0.005727 Jy/beam ! Clean residual mean=0.000012 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 1.35779 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 1.35779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068280Jy sigma=0.806723 ! Fit after self-cal, rms=0.068229Jy sigma=0.805679 ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068229Jy sigma=0.805679 ! Fit after self-cal, rms=0.063378Jy sigma=0.748973 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.13 mas, bmaj=2.616 mas, bpa=-5.485 degrees ! Estimated noise=1.20848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446101 Jy ! Component: 100 - total flux cleaned = -0.000231215 Jy ! Component: 150 - total flux cleaned = -0.000617116 Jy ! Component: 200 - total flux cleaned = -0.000964489 Jy ! Total flux subtracted in 200 components = -0.000964489 Jy ! Clean residual min=-0.003909 max=0.004154 Jy/beam ! Clean residual mean=0.000013 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 1.35682 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 1.35682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062968Jy sigma=0.743707 ! Fit after self-cal, rms=0.062953Jy sigma=0.743209 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.6, 50.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312265 Jy ! Component: 100 - total flux cleaned = 0.00321064 Jy ! Component: 150 - total flux cleaned = 0.00320923 Jy ! Component: 200 - total flux cleaned = 0.00336167 Jy ! Total flux subtracted in 200 components = 0.00336167 Jy ! Clean residual min=-0.003897 max=0.003735 Jy/beam ! Clean residual mean=0.000012 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 1.36019 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 113 components and 1.36019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062631Jy sigma=0.739207 ! Fit after self-cal, rms=0.062615Jy sigma=0.738926 ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062615Jy sigma=0.738926 ! Fit after self-cal, rms=0.060521Jy sigma=0.712544 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.131 mas, bmaj=2.619 mas, bpa=-5.504 degrees ! Estimated noise=1.209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341222 Jy ! Component: 100 - total flux cleaned = 0.000260743 Jy ! Component: 150 - total flux cleaned = 0.000188907 Jy ! Component: 200 - total flux cleaned = 0.000188541 Jy ! Total flux subtracted in 200 components = 0.000188541 Jy ! Clean residual min=-0.003305 max=0.003029 Jy/beam ! Clean residual mean=0.000031 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 1.36037 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 129 components and 1.36037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060317Jy sigma=0.709789 ! Fit after self-cal, rms=0.060318Jy sigma=0.709599 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157583 Jy ! Component: 100 - total flux cleaned = 0.000278961 Jy ! Component: 150 - total flux cleaned = 0.000336451 Jy ! Component: 200 - total flux cleaned = 0.000336302 Jy ! Total flux subtracted in 200 components = 0.000336302 Jy ! Clean residual min=-0.003221 max=0.003007 Jy/beam ! Clean residual mean=0.000031 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 1.36071 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 145 components and 1.36071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060193Jy sigma=0.708132 ! Fit after self-cal, rms=0.060196Jy sigma=0.708075 ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060196Jy sigma=0.708075 ! Fit after self-cal, rms=0.060199Jy sigma=0.707697 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=2.579 mas, bmaj=5.034 mas, bpa=-4.893 degrees ! Estimated noise=1.39845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441165 Jy ! Component: 100 - total flux cleaned = 0.000523446 Jy ! Component: 150 - total flux cleaned = 0.000632401 Jy ! Component: 200 - total flux cleaned = 0.000797442 Jy ! Total flux subtracted in 200 components = 0.000797442 Jy ! Clean residual min=-0.003041 max=0.002541 Jy/beam ! Clean residual mean=0.000050 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 1.36151 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 169 components and 1.36151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060152Jy sigma=0.706899 ! Fit after self-cal, rms=0.060154Jy sigma=0.706851 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023809 Jy ! Component: 100 - total flux cleaned = 0.000329309 Jy ! Component: 150 - total flux cleaned = 0.000386533 Jy ! Component: 200 - total flux cleaned = 0.000413951 Jy ! Total flux subtracted in 200 components = 0.000413951 Jy ! Clean residual min=-0.003053 max=0.002570 Jy/beam ! Clean residual mean=0.000050 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 1.36192 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 180 components and 1.36192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060127Jy sigma=0.706404 ! Fit after self-cal, rms=0.060127Jy sigma=0.706385 ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.131 mas, bmaj=2.62 mas, bpa=-5.515 degrees ! Estimated noise=1.20895 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.131 x 2.62 at -5.515 degrees (North through East) ! Clean map min=-0.0028508 max=1.1127 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060127Jy sigma=0.706385 ! Fit after self-cal, rms=0.055969Jy sigma=0.640609 ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.131 mas, bmaj=2.618 mas, bpa=-5.51 degrees ! Estimated noise=1.20874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295516 Jy ! Component: 100 - total flux cleaned = -0.00068538 Jy ! Component: 150 - total flux cleaned = -0.000790057 Jy ! Component: 200 - total flux cleaned = -0.000887784 Jy ! Total flux subtracted in 200 components = -0.000887784 Jy ! Clean residual min=-0.003121 max=0.002898 Jy/beam ! Clean residual mean=0.000032 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 1.36103 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 184 components and 1.36103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055851Jy sigma=0.639392 ! Fit after self-cal, rms=0.055855Jy sigma=0.639336 ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.81605e-05 Jy ! Component: 100 - total flux cleaned = -8.5773e-05 Jy ! Component: 150 - total flux cleaned = -0.000132191 Jy ! Component: 200 - total flux cleaned = -0.000176236 Jy ! Total flux subtracted in 200 components = -0.000176236 Jy ! Clean residual min=-0.003099 max=0.002885 Jy/beam ! Clean residual mean=0.000031 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 1.36086 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 188 components and 1.36086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055774Jy sigma=0.638442 ! Fit after self-cal, rms=0.055778Jy sigma=0.638419 ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055778Jy sigma=0.638419 ! Fit after self-cal, rms=0.055783Jy sigma=0.638259 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8498 mas, bmaj=1.96 mas, bpa=-4.507 degrees ! Estimated noise=1.58417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.839264 Jy ! Component: 100 - total flux cleaned = 1.06258 Jy ! Component: 150 - total flux cleaned = 1.16003 Jy ! Component: 200 - total flux cleaned = 1.20949 Jy ! Total flux subtracted in 200 components = 1.20949 Jy ! Clean residual min=-0.009397 max=0.025526 Jy/beam ! Clean residual mean=0.000155 rms=0.002607 Jy/beam ! Combined flux in latest and established models = 1.20949 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.20949 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.131 mas, bmaj=2.618 mas, bpa=-5.517 degrees ! Estimated noise=1.20864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515676 Jy ! Component: 100 - total flux cleaned = 0.0802286 Jy ! Component: 150 - total flux cleaned = 0.0981128 Jy ! Component: 200 - total flux cleaned = 0.110015 Jy ! Total flux subtracted in 200 components = 0.110015 Jy ! Clean residual min=-0.004484 max=0.007710 Jy/beam ! Clean residual mean=0.000081 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 1.3195 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 51 components and 1.3195 Jy ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (0.2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870134 Jy ! Component: 100 - total flux cleaned = 0.0150932 Jy ! Component: 150 - total flux cleaned = 0.0201587 Jy ! Component: 200 - total flux cleaned = 0.0243526 Jy ! Total flux subtracted in 200 components = 0.0243526 Jy ! Clean residual min=-0.003363 max=0.003900 Jy/beam ! Clean residual mean=0.000047 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 1.34386 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 1.34386 Jy ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-3, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392754 Jy ! Component: 100 - total flux cleaned = 0.00690753 Jy ! Component: 150 - total flux cleaned = 0.00903052 Jy ! Component: 200 - total flux cleaned = 0.0100982 Jy ! Total flux subtracted in 200 components = 0.0100982 Jy ! Clean residual min=-0.003199 max=0.003214 Jy/beam ! Clean residual mean=0.000036 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 1.35396 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 93 components and 1.35396 Jy ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=2.579 mas, bmaj=5.035 mas, bpa=-4.882 degrees ! Estimated noise=1.39791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214987 Jy ! Component: 100 - total flux cleaned = 0.00375132 Jy ! Component: 150 - total flux cleaned = 0.00489126 Jy ! Component: 200 - total flux cleaned = 0.0053796 Jy ! Total flux subtracted in 200 components = 0.0053796 Jy ! Clean residual min=-0.002977 max=0.002567 Jy/beam ! Clean residual mean=0.000051 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 1.35933 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467323 Jy ! Component: 100 - total flux cleaned = 0.000810879 Jy ! Component: 150 - total flux cleaned = 0.000997358 Jy ! Component: 200 - total flux cleaned = 0.0011717 Jy ! Total flux subtracted in 200 components = 0.0011717 Jy ! Clean residual min=-0.002995 max=0.002535 Jy/beam ! Clean residual mean=0.000048 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 1.36051 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 124 components and 1.36051 Jy ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.131 mas, bmaj=2.618 mas, bpa=-5.517 degrees ! Estimated noise=1.20864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464935 Jy ! Component: 100 - total flux cleaned = -0.000385751 Jy ! Component: 150 - total flux cleaned = -0.000450858 Jy ! Component: 200 - total flux cleaned = -0.000385299 Jy ! Total flux subtracted in 200 components = -0.000385299 Jy ! Clean residual min=-0.002950 max=0.003113 Jy/beam ! Clean residual mean=0.000032 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 1.36012 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 131 components and 1.36012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056495Jy sigma=0.641607 ! Fit after self-cal, rms=0.056443Jy sigma=0.640218 wmodel J0836-2016_X_map.mod ! Writing 131 model components to file: J0836-2016_X_map.mod wobs J0836-2016_X_uvs.fits ! Writing UV FITS file: J0836-2016_X_uvs.fits wwins J0836-2016_X_map.win ! wwins: Wrote 9 windows to J0836-2016_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.46223e-05 Jy ! Component: 100 - total flux cleaned = 0.000369246 Jy ! Component: 150 - total flux cleaned = 0.00057344 Jy ! Component: 200 - total flux cleaned = 0.000971802 Jy ! Component: 250 - total flux cleaned = 0.00126358 Jy ! Component: 300 - total flux cleaned = 0.00145428 Jy ! Component: 350 - total flux cleaned = 0.00173626 Jy ! Component: 400 - total flux cleaned = 0.00215254 Jy ! Component: 450 - total flux cleaned = 0.00247198 Jy ! Component: 500 - total flux cleaned = 0.0028769 Jy ! Component: 550 - total flux cleaned = 0.00309962 Jy ! Component: 600 - total flux cleaned = 0.00340827 Jy ! Component: 650 - total flux cleaned = 0.00384367 Jy ! Component: 700 - total flux cleaned = 0.00423175 Jy ! Component: 750 - total flux cleaned = 0.00440288 Jy ! Component: 800 - total flux cleaned = 0.00474082 Jy ! Component: 850 - total flux cleaned = 0.00507532 Jy ! Component: 900 - total flux cleaned = 0.00507551 Jy ! Component: 950 - total flux cleaned = 0.00544553 Jy ! Component: 1000 - total flux cleaned = 0.00564883 Jy ! Component: 1050 - total flux cleaned = 0.00581043 Jy ! Component: 1100 - total flux cleaned = 0.00593065 Jy ! Component: 1150 - total flux cleaned = 0.00636741 Jy ! Component: 1200 - total flux cleaned = 0.00644569 Jy ! Component: 1250 - total flux cleaned = 0.00656297 Jy ! Component: 1300 - total flux cleaned = 0.00691193 Jy ! Component: 1350 - total flux cleaned = 0.00691228 Jy ! Component: 1400 - total flux cleaned = 0.00710347 Jy ! Component: 1450 - total flux cleaned = 0.00744437 Jy ! Component: 1500 - total flux cleaned = 0.00751971 Jy ! Component: 1550 - total flux cleaned = 0.00774415 Jy ! Component: 1600 - total flux cleaned = 0.00766984 Jy ! Component: 1650 - total flux cleaned = 0.00789148 Jy ! Component: 1700 - total flux cleaned = 0.00811159 Jy ! Component: 1750 - total flux cleaned = 0.00829356 Jy ! Component: 1800 - total flux cleaned = 0.00829342 Jy ! Component: 1850 - total flux cleaned = 0.0085094 Jy ! Component: 1900 - total flux cleaned = 0.00861665 Jy ! Component: 1950 - total flux cleaned = 0.00872346 Jy ! Component: 2000 - total flux cleaned = 0.00882922 Jy ! Component: 2050 - total flux cleaned = 0.00897005 Jy ! Component: 2100 - total flux cleaned = 0.0091099 Jy ! Component: 2150 - total flux cleaned = 0.00921448 Jy ! Component: 2200 - total flux cleaned = 0.00935256 Jy ! Component: 2250 - total flux cleaned = 0.00952479 Jy ! Component: 2300 - total flux cleaned = 0.00966176 Jy ! Component: 2350 - total flux cleaned = 0.00979813 Jy ! Component: 2400 - total flux cleaned = 0.00996753 Jy ! Component: 2450 - total flux cleaned = 0.0100689 Jy ! Component: 2500 - total flux cleaned = 0.0101694 Jy ! Component: 2550 - total flux cleaned = 0.0102027 Jy ! Component: 2600 - total flux cleaned = 0.0104018 Jy ! Component: 2650 - total flux cleaned = 0.0105339 Jy ! Component: 2700 - total flux cleaned = 0.01083 Jy ! Component: 2750 - total flux cleaned = 0.0107644 Jy ! Component: 2800 - total flux cleaned = 0.0108623 Jy ! Component: 2850 - total flux cleaned = 0.0108949 Jy ! Component: 2900 - total flux cleaned = 0.011024 Jy ! Component: 2950 - total flux cleaned = 0.0110563 Jy ! Component: 3000 - total flux cleaned = 0.0112483 Jy ! Component: 3050 - total flux cleaned = 0.0114078 Jy ! Component: 3100 - total flux cleaned = 0.0114079 Jy ! Component: 3150 - total flux cleaned = 0.0115339 Jy ! Component: 3200 - total flux cleaned = 0.0115652 Jy ! Component: 3250 - total flux cleaned = 0.0115652 Jy ! Component: 3300 - total flux cleaned = 0.0119078 Jy ! Component: 3350 - total flux cleaned = 0.0118148 Jy ! Component: 3400 - total flux cleaned = 0.0119077 Jy ! Component: 3450 - total flux cleaned = 0.0120308 Jy ! Component: 3500 - total flux cleaned = 0.0121229 Jy ! Component: 3550 - total flux cleaned = 0.0121227 Jy ! Component: 3600 - total flux cleaned = 0.0123051 Jy ! Component: 3650 - total flux cleaned = 0.0123353 Jy ! Component: 3700 - total flux cleaned = 0.0123955 Jy ! Component: 3750 - total flux cleaned = 0.0125456 Jy ! Component: 3800 - total flux cleaned = 0.0127249 Jy ! Component: 3850 - total flux cleaned = 0.0126056 Jy ! Component: 3900 - total flux cleaned = 0.0128429 Jy ! Component: 3950 - total flux cleaned = 0.0129608 Jy ! Component: 4000 - total flux cleaned = 0.0129314 Jy ! Component: 4050 - total flux cleaned = 0.0130779 Jy ! Total flux subtracted in 4096 components = 0.013224 Jy ! Clean residual min=-0.001670 max=0.001587 Jy/beam ! Clean residual mean=0.000024 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 1.37335 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 415 components and 1.37334 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv121_uvs/J0836-2016_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.131 x 2.618 at -5.517 degrees (North through East) ! Clean map min=-0.0028463 max=1.1154 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv121_uvs/J0836-2016_X_map.fits wmodel /scr/pima/rv121_uvs/J0836-2016_X_map.mod ! Writing 415 model components to file: /scr/pima/rv121_uvs/J0836-2016_X_map.mod wobs /scr/pima/rv121_uvs/J0836-2016_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv121_uvs/J0836-2016_X_uvs.fits wwins /scr/pima/rv121_uvs/J0836-2016_X_map.win ! wwins: Wrote 10 windows to /scr/pima/rv121_uvs/J0836-2016_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.11541 invert ! Inverting map ! Your choice of large map pixels excluded 0.102% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000510351 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.137264 0.137264 0.274527 0.549054 1.09811 2.19622 4.39243 8.78487 17.5697 35.1395 70.2789 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.115 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2185.58 quit ! Quitting program ! Log file /scr/pima/rv121_uvs/J0836-2016_X_dfm.log closed on Sat Jul 28 00:39:58 2018