! Started logfile: /scr/pima/rv121_uvs/J0536-3401_S_dfm.log on Sat Jul 28 00:08:43 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv121_uvs/J0536-3401_S_uva.fits
! Reading UV FITS file: /scr/pima/rv121_uvs/J0536-3401_S_uva.fits
! AN table 1: 11 integrations on 21 of 21 possible baselines.
! AN table 2: 32 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.46927 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0536-3401
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 2596 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0536-3401_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
!  A total of 132 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
!  A total of 132 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
!  A total of 168 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
!  A total of 132 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.143115Jy  sigma=15.556164
! Fit after  self-cal, rms=0.531563Jy  sigma=7.208072
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.581 mas, bmaj=8.35 mas, bpa=-0.1445 degrees
! Estimated noise=1.85636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.354886 Jy
! Component: 100  -  total flux cleaned = 0.436771 Jy
! Total flux subtracted in 100 components = 0.436771 Jy
! Clean residual min=-0.015623 max=0.030841 Jy/beam
! Clean residual mean=-0.000041 rms=0.003777 Jy/beam
! Combined flux in latest and established models = 0.436771 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.436771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113613Jy  sigma=1.400620
! Fit after  self-cal, rms=0.113595Jy  sigma=1.400534
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327979 Jy
! Component: 100  -  total flux cleaned = 0.0498799 Jy
! Total flux subtracted in 100 components = 0.0498799 Jy
! Clean residual min=-0.014228 max=0.020315 Jy/beam
! Clean residual mean=-0.000104 rms=0.003038 Jy/beam
! Combined flux in latest and established models = 0.486651 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 22 components and 0.486651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098149Jy  sigma=1.160331
! Fit after  self-cal, rms=0.098126Jy  sigma=1.160207
! Inverting map 
! Added new window around map position (-7, -16).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164966 Jy
! Component: 100  -  total flux cleaned = 0.0200544 Jy
! Total flux subtracted in 100 components = 0.0200544 Jy
! Clean residual min=-0.013616 max=0.016373 Jy/beam
! Clean residual mean=-0.000128 rms=0.002791 Jy/beam
! Combined flux in latest and established models = 0.506706 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.506706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095428Jy  sigma=1.121136
! Fit after  self-cal, rms=0.094906Jy  sigma=1.112141
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.631 mas, bmaj=11.47 mas, bpa=-2.549 degrees
! Estimated noise=1.24895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716317 Jy
! Component: 100  -  total flux cleaned = 0.00760969 Jy
! Component: 150  -  total flux cleaned = 0.0076216 Jy
! Component: 200  -  total flux cleaned = 0.00747547 Jy
! Total flux subtracted in 200 components = 0.00747547 Jy
! Clean residual min=-0.009050 max=0.007967 Jy/beam
! Clean residual mean=-0.000871 rms=0.002220 Jy/beam
! Combined flux in latest and established models = 0.514181 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.514181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093806Jy  sigma=1.096421
! Fit after  self-cal, rms=0.093763Jy  sigma=1.095088
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.631 x 11.47 at -2.549 degrees (North through East)
! Clean map  min=-0.0087532  max=0.45454 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.16     KP        0.95     LA        0.99     
!   NL        1.10     PT        1.01     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.98     KP        0.99     LA        1.00     
!   MK        0.97     NL        1.19     OV        1.00     PT        1.01     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.24     KP        0.98     LA        0.96     
!   NL        1.16     PT        1.02     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.99     KP        0.99     LA        0.98     
!   MK        1.00     NL        1.12     OV        0.98     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.19     KP        1.00*    LA        0.96     
!   NL        1.00*    PT        0.96     SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     FD        0.99     KP        1.00*    LA        1.25     
!   MK        0.83     NL        1.00*    OV        0.99     PT        0.98     
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.29     KP        0.97     LA        0.98     
!   NL        1.14     PT        1.01     SC        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.97     KP        0.99     LA        1.00     
!   MK        1.04     NL        1.11     OV        0.94     PT        1.01     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.093763Jy  sigma=1.095088
! Fit after  self-cal, rms=0.097285Jy  sigma=0.985228
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.598 mas, bmaj=11.45 mas, bpa=-2.678 degrees
! Estimated noise=1.25142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000183785 Jy
! Component: 100  -  total flux cleaned = -7.94202e-05 Jy
! Component: 150  -  total flux cleaned = -0.000164364 Jy
! Component: 200  -  total flux cleaned = -0.000306255 Jy
! Total flux subtracted in 200 components = -0.000306255 Jy
! Clean residual min=-0.007457 max=0.006627 Jy/beam
! Clean residual mean=-0.000689 rms=0.001812 Jy/beam
! Combined flux in latest and established models = 0.513875 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.513875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097030Jy  sigma=0.979680
! Fit after  self-cal, rms=0.097096Jy  sigma=0.979049
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097096Jy  sigma=0.979049
! Fit after  self-cal, rms=0.080685Jy  sigma=0.877751
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.596 mas, bmaj=11.47 mas, bpa=-2.553 degrees
! Estimated noise=1.25493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179737 Jy
! Component: 100  -  total flux cleaned = 0.00189931 Jy
! Component: 150  -  total flux cleaned = 0.0018142 Jy
! Component: 200  -  total flux cleaned = 0.00177684 Jy
! Total flux subtracted in 200 components = 0.00177684 Jy
! Clean residual min=-0.005059 max=0.004441 Jy/beam
! Clean residual mean=-0.000158 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.515652 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.515652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080574Jy  sigma=0.877040
! Fit after  self-cal, rms=0.080668Jy  sigma=0.876833
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187081 Jy
! Component: 100  -  total flux cleaned = 8.00134e-05 Jy
! Component: 150  -  total flux cleaned = 1.33939e-05 Jy
! Component: 200  -  total flux cleaned = -4.90699e-05 Jy
! Total flux subtracted in 200 components = -4.90699e-05 Jy
! Clean residual min=-0.005069 max=0.004369 Jy/beam
! Clean residual mean=-0.000161 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.515603 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 0.515603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080633Jy  sigma=0.876458
! Fit after  self-cal, rms=0.080632Jy  sigma=0.876418
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080632Jy  sigma=0.876418
! Fit after  self-cal, rms=0.070377Jy  sigma=0.812926
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.595 mas, bmaj=11.48 mas, bpa=-2.519 degrees
! Estimated noise=1.25481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.82921e-05 Jy
! Component: 100  -  total flux cleaned = -0.000122723 Jy
! Component: 150  -  total flux cleaned = -0.000157324 Jy
! Component: 200  -  total flux cleaned = -0.00018872 Jy
! Total flux subtracted in 200 components = -0.00018872 Jy
! Clean residual min=-0.003588 max=0.003213 Jy/beam
! Clean residual mean=-0.000136 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.515414 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 76 components and 0.515414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070336Jy  sigma=0.812496
! Fit after  self-cal, rms=0.070344Jy  sigma=0.812403
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.06081e-05 Jy
! Component: 100  -  total flux cleaned = 8.80754e-06 Jy
! Component: 150  -  total flux cleaned = -1.97697e-05 Jy
! Component: 200  -  total flux cleaned = -1.91501e-05 Jy
! Total flux subtracted in 200 components = -1.91501e-05 Jy
! Clean residual min=-0.003604 max=0.003218 Jy/beam
! Clean residual mean=-0.000136 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.515395 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 76 components and 0.515395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070314Jy  sigma=0.812130
! Fit after  self-cal, rms=0.070316Jy  sigma=0.812106
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070316Jy  sigma=0.812106
! Fit after  self-cal, rms=0.070242Jy  sigma=0.811814
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.763 mas, bmaj=27.71 mas, bpa=5.048 degrees
! Estimated noise=1.53592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029904 Jy
! Component: 100  -  total flux cleaned = -0.000316311 Jy
! Component: 150  -  total flux cleaned = -0.000329594 Jy
! Component: 200  -  total flux cleaned = -0.000330456 Jy
! Total flux subtracted in 200 components = -0.000330456 Jy
! Clean residual min=-0.003209 max=0.002921 Jy/beam
! Clean residual mean=-0.000219 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.515064 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 82 components and 0.515064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070239Jy  sigma=0.811795
! Fit after  self-cal, rms=0.070242Jy  sigma=0.811776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.10096e-07 Jy
! Component: 100  -  total flux cleaned = -1.2968e-05 Jy
! Component: 150  -  total flux cleaned = 1.2485e-05 Jy
! Component: 200  -  total flux cleaned = 1.31071e-05 Jy
! Total flux subtracted in 200 components = 1.31071e-05 Jy
! Clean residual min=-0.003200 max=0.002916 Jy/beam
! Clean residual mean=-0.000220 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.515077 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 85 components and 0.515077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070240Jy  sigma=0.811770
! Fit after  self-cal, rms=0.070241Jy  sigma=0.811753
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.595 mas, bmaj=11.49 mas, bpa=-2.519 degrees
! Estimated noise=1.25419 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.595 x 11.49 at -2.519 degrees (North through East)
! Clean map  min=-0.0045069  max=0.4563 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.554 mas, bmaj=8.346 mas, bpa=-0.1312 degrees
! Estimated noise=1.88354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.357533 Jy
! Component: 100  -  total flux cleaned = 0.440376 Jy
! Component: 150  -  total flux cleaned = 0.47284 Jy
! Component: 200  -  total flux cleaned = 0.490692 Jy
! Total flux subtracted in 200 components = 0.490692 Jy
! Clean residual min=-0.007000 max=0.009047 Jy/beam
! Clean residual mean=0.000002 rms=0.001713 Jy/beam
! Combined flux in latest and established models = 0.490692 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.490692 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.595 mas, bmaj=11.49 mas, bpa=-2.519 degrees
! Estimated noise=1.25419 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153022 Jy
! Component: 100  -  total flux cleaned = 0.0216833 Jy
! Component: 150  -  total flux cleaned = 0.0238252 Jy
! Component: 200  -  total flux cleaned = 0.0241618 Jy
! Total flux subtracted in 200 components = 0.0241618 Jy
! Clean residual min=-0.003853 max=0.003433 Jy/beam
! Clean residual mean=-0.000130 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.514854 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 48 components and 0.514854 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.763 mas, bmaj=27.71 mas, bpa=5.048 degrees
! Estimated noise=1.53592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484041 Jy
! Component: 100  -  total flux cleaned = 0.000581583 Jy
! Component: 150  -  total flux cleaned = 0.000539899 Jy
! Component: 200  -  total flux cleaned = 0.000500114 Jy
! Total flux subtracted in 200 components = 0.000500114 Jy
! Clean residual min=-0.003284 max=0.003021 Jy/beam
! Clean residual mean=-0.000221 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.515354 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.50547e-06 Jy
! Component: 100  -  total flux cleaned = -3.37517e-05 Jy
! Component: 150  -  total flux cleaned = -6.67769e-05 Jy
! Component: 200  -  total flux cleaned = -9.74851e-05 Jy
! Total flux subtracted in 200 components = -9.74851e-05 Jy
! Clean residual min=-0.003293 max=0.002972 Jy/beam
! Clean residual mean=-0.000220 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.515257 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.515257 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.595 mas, bmaj=11.49 mas, bpa=-2.519 degrees
! Estimated noise=1.25419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172293 Jy
! Component: 100  -  total flux cleaned = 7.05158e-05 Jy
! Component: 150  -  total flux cleaned = -2.06785e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105572 Jy
! Total flux subtracted in 200 components = -0.000105572 Jy
! Clean residual min=-0.003757 max=0.003191 Jy/beam
! Clean residual mean=-0.000131 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.515151 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 65 components and 0.515152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070270Jy  sigma=0.812367
! Fit after  self-cal, rms=0.070229Jy  sigma=0.811832
wmodel J0536-3401_S_map.mod
! Writing 65 model components to file: J0536-3401_S_map.mod
wobs   J0536-3401_S_uvs.fits
! Writing UV FITS file: J0536-3401_S_uvs.fits
wwins  J0536-3401_S_map.win
! wwins: Wrote 2 windows to J0536-3401_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113553 Jy
! Component: 100  -  total flux cleaned = -0.00174401 Jy
! Component: 150  -  total flux cleaned = -0.00221317 Jy
! Component: 200  -  total flux cleaned = -0.00266301 Jy
! Component: 250  -  total flux cleaned = -0.00314459 Jy
! Component: 300  -  total flux cleaned = -0.00361428 Jy
! Component: 350  -  total flux cleaned = -0.00411967 Jy
! Component: 400  -  total flux cleaned = -0.00456967 Jy
! Component: 450  -  total flux cleaned = -0.00501138 Jy
! Component: 500  -  total flux cleaned = -0.00548843 Jy
! Component: 550  -  total flux cleaned = -0.00582921 Jy
! Component: 600  -  total flux cleaned = -0.0062066 Jy
! Component: 650  -  total flux cleaned = -0.00653721 Jy
! Component: 700  -  total flux cleaned = -0.00690346 Jy
! Component: 750  -  total flux cleaned = -0.00718421 Jy
! Component: 800  -  total flux cleaned = -0.00750124 Jy
! Component: 850  -  total flux cleaned = -0.00773557 Jy
! Component: 900  -  total flux cleaned = -0.00796686 Jy
! Component: 950  -  total flux cleaned = -0.008271 Jy
! Component: 1000  -  total flux cleaned = -0.00845846 Jy
! Component: 1050  -  total flux cleaned = -0.00868083 Jy
! Component: 1100  -  total flux cleaned = -0.00882763 Jy
! Component: 1150  -  total flux cleaned = -0.00900921 Jy
! Component: 1200  -  total flux cleaned = -0.00926072 Jy
! Component: 1250  -  total flux cleaned = -0.00940252 Jy
! Component: 1300  -  total flux cleaned = -0.00954297 Jy
! Component: 1350  -  total flux cleaned = -0.00968197 Jy
! Component: 1400  -  total flux cleaned = -0.00992262 Jy
! Component: 1450  -  total flux cleaned = -0.0100245 Jy
! Component: 1500  -  total flux cleaned = -0.0102269 Jy
! Component: 1550  -  total flux cleaned = -0.010294 Jy
! Component: 1600  -  total flux cleaned = -0.0104264 Jy
! Component: 1650  -  total flux cleaned = -0.0105575 Jy
! Component: 1700  -  total flux cleaned = -0.0106226 Jy
! Component: 1750  -  total flux cleaned = -0.0107836 Jy
! Component: 1800  -  total flux cleaned = -0.0107836 Jy
! Component: 1850  -  total flux cleaned = -0.0108472 Jy
! Component: 1900  -  total flux cleaned = -0.010973 Jy
! Component: 1950  -  total flux cleaned = -0.0110661 Jy
! Component: 2000  -  total flux cleaned = -0.0110352 Jy
! Component: 2050  -  total flux cleaned = -0.0111272 Jy
! Component: 2100  -  total flux cleaned = -0.0111576 Jy
! Component: 2150  -  total flux cleaned = -0.0111577 Jy
! Component: 2200  -  total flux cleaned = -0.0112776 Jy
! Component: 2250  -  total flux cleaned = -0.0112778 Jy
! Component: 2300  -  total flux cleaned = -0.011278 Jy
! Component: 2350  -  total flux cleaned = -0.0113953 Jy
! Component: 2400  -  total flux cleaned = -0.0114246 Jy
! Component: 2450  -  total flux cleaned = -0.0114535 Jy
! Component: 2500  -  total flux cleaned = -0.0114536 Jy
! Component: 2550  -  total flux cleaned = -0.0115109 Jy
! Component: 2600  -  total flux cleaned = -0.0115955 Jy
! Component: 2650  -  total flux cleaned = -0.011511 Jy
! Component: 2700  -  total flux cleaned = -0.0116228 Jy
! Component: 2750  -  total flux cleaned = -0.0116226 Jy
! Component: 2800  -  total flux cleaned = -0.0116228 Jy
! Component: 2850  -  total flux cleaned = -0.0116774 Jy
! Component: 2900  -  total flux cleaned = -0.0117043 Jy
! Component: 2950  -  total flux cleaned = -0.0117314 Jy
! Component: 3000  -  total flux cleaned = -0.0117314 Jy
! Component: 3050  -  total flux cleaned = -0.0117315 Jy
! Component: 3100  -  total flux cleaned = -0.0118115 Jy
! Component: 3150  -  total flux cleaned = -0.0118115 Jy
! Component: 3200  -  total flux cleaned = -0.0118642 Jy
! Component: 3250  -  total flux cleaned = -0.0118378 Jy
! Component: 3300  -  total flux cleaned = -0.0119156 Jy
! Component: 3350  -  total flux cleaned = -0.0119668 Jy
! Component: 3400  -  total flux cleaned = -0.0119155 Jy
! Component: 3450  -  total flux cleaned = -0.0120177 Jy
! Component: 3500  -  total flux cleaned = -0.0119924 Jy
! Component: 3550  -  total flux cleaned = -0.0120934 Jy
! Component: 3600  -  total flux cleaned = -0.0120683 Jy
! Component: 3650  -  total flux cleaned = -0.0121184 Jy
! Component: 3700  -  total flux cleaned = -0.0121432 Jy
! Component: 3750  -  total flux cleaned = -0.0121185 Jy
! Component: 3800  -  total flux cleaned = -0.0121431 Jy
! Component: 3850  -  total flux cleaned = -0.0121677 Jy
! Component: 3900  -  total flux cleaned = -0.0122165 Jy
! Component: 3950  -  total flux cleaned = -0.0122166 Jy
! Component: 4000  -  total flux cleaned = -0.0122409 Jy
! Component: 4050  -  total flux cleaned = -0.0122649 Jy
! Total flux subtracted in 4096 components = -0.0123128 Jy
! Clean residual min=-0.001357 max=0.001422 Jy/beam
! Clean residual mean=-0.000042 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.502839 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 341 components and 0.502839 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv121_uvs/J0536-3401_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.595 x 11.49 at -2.519 degrees (North through East)
! Clean map  min=-0.0031161  max=0.4611 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv121_uvs/J0536-3401_S_map.fits
wmodel /scr/pima/rv121_uvs/J0536-3401_S_map.mod
! Writing 341 model components to file: /scr/pima/rv121_uvs/J0536-3401_S_map.mod
wobs   /scr/pima/rv121_uvs/J0536-3401_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv121_uvs/J0536-3401_S_uvs.fits
wwins  /scr/pima/rv121_uvs/J0536-3401_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv121_uvs/J0536-3401_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.461096 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000450077 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.292831 0.292831 0.585662 1.17132 2.34265 4.6853 9.37059 18.7412 37.4824 74.9647
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.461 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1024.48 
quit
! Quitting program
! Log file /scr/pima/rv121_uvs/J0536-3401_S_dfm.log closed on Sat Jul 28 00:08:47 2018