! Started logfile: /scr/pima/rv121_uvs/J0336-3616_S_dfm.log on Sat Jul 28 00:08:20 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv121_uvs/J0336-3616_S_uva.fits
! Reading UV FITS file: /scr/pima/rv121_uvs/J0336-3616_S_uva.fits
! AN table 1: 16 integrations on 21 of 21 possible baselines.
! AN table 2: 15 integrations on 15 of 15 possible baselines.
! AN table 3: 5 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.793286 visibilities/baseline/integration-bin.
! Found source: J0336-3616
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 1796 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0336-3616_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 10 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 10 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 62 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  A total of 10 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 10 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.119358Jy  sigma=14.844266
! Fit after  self-cal, rms=0.542691Jy  sigma=6.861201
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=12.28 mas, bpa=-13.91 degrees
! Estimated noise=2.15325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.345854 Jy
! Component: 100  -  total flux cleaned = 0.435311 Jy
! Total flux subtracted in 100 components = 0.435311 Jy
! Clean residual min=-0.021984 max=0.040424 Jy/beam
! Clean residual mean=-0.000437 rms=0.006214 Jy/beam
! Combined flux in latest and established models = 0.435311 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.435311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140705Jy  sigma=1.732850
! Fit after  self-cal, rms=0.140519Jy  sigma=1.730928
! Inverting map 
! Added new window around map position (1.5, -12.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0438013 Jy
! Component: 100  -  total flux cleaned = 0.0708554 Jy
! Total flux subtracted in 100 components = 0.0708554 Jy
! Clean residual min=-0.019951 max=0.028858 Jy/beam
! Clean residual mean=-0.000230 rms=0.004790 Jy/beam
! Combined flux in latest and established models = 0.506167 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.506167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113758Jy  sigma=1.315836
! Fit after  self-cal, rms=0.113480Jy  sigma=1.313068
! Inverting map 
! Added new window around map position (-10.5, 12).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027727 Jy
! Component: 100  -  total flux cleaned = 0.0451043 Jy
! Total flux subtracted in 100 components = 0.0451043 Jy
! Clean residual min=-0.016485 max=0.019685 Jy/beam
! Clean residual mean=-0.000074 rms=0.004029 Jy/beam
! Combined flux in latest and established models = 0.551271 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.551271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103379Jy  sigma=1.173687
! Fit after  self-cal, rms=0.102857Jy  sigma=1.167209
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.28 mas, bmaj=15.93 mas, bpa=-13.61 degrees
! Estimated noise=1.49324 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219274 Jy
! Component: 100  -  total flux cleaned = 0.0328965 Jy
! Component: 150  -  total flux cleaned = 0.0357883 Jy
! Component: 200  -  total flux cleaned = 0.0360233 Jy
! Total flux subtracted in 200 components = 0.0360233 Jy
! Clean residual min=-0.009681 max=0.011176 Jy/beam
! Clean residual mean=0.000084 rms=0.002764 Jy/beam
! Combined flux in latest and established models = 0.587294 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 73 components and 0.587295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097516Jy  sigma=1.101876
! Fit after  self-cal, rms=0.097434Jy  sigma=1.099914
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.28 x 15.93 at -13.61 degrees (North through East)
! Clean map  min=-0.009408  max=0.41929 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.18     KP        0.99     LA        0.98     
!   NL        1.05     PT        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        0.98     LA        1.00     MK        0.98     
!   OV        0.96     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.00*    OV        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.25     KP        0.96     LA        1.02     
!   NL        1.04     PT        1.01     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     KP        1.00     LA        1.00     MK        1.02     
!   OV        0.97     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.00*    OV        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.08     KP        1.00*    LA        0.80     
!   NL        1.00*    PT        1.04     SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     KP        1.00*    LA        1.24     MK        0.79     
!   OV        1.00     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.00*    OV        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.14     KP        0.97     LA        1.00     
!   NL        1.04     PT        1.01     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     KP        0.96     LA        1.03     MK        1.12     
!   OV        0.97     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.00*    OV        0.00*    
! 
! 
! Fit before self-cal, rms=0.097434Jy  sigma=1.099914
! Fit after  self-cal, rms=0.094649Jy  sigma=0.983034
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.221 mas, bmaj=15.63 mas, bpa=-13.57 degrees
! Estimated noise=1.52044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00258871 Jy
! Component: 100  -  total flux cleaned = -0.00318069 Jy
! Component: 150  -  total flux cleaned = -0.00351179 Jy
! Component: 200  -  total flux cleaned = -0.00379877 Jy
! Total flux subtracted in 200 components = -0.00379877 Jy
! Clean residual min=-0.007843 max=0.007998 Jy/beam
! Clean residual mean=0.000165 rms=0.002063 Jy/beam
! Combined flux in latest and established models = 0.583496 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.583496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093895Jy  sigma=0.971149
! Fit after  self-cal, rms=0.093926Jy  sigma=0.970129
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093926Jy  sigma=0.970129
! Fit after  self-cal, rms=0.085410Jy  sigma=0.889367
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.214 mas, bmaj=15.65 mas, bpa=-13.43 degrees
! Estimated noise=1.52255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127069 Jy
! Component: 100  -  total flux cleaned = 0.000903657 Jy
! Component: 150  -  total flux cleaned = 0.000691344 Jy
! Component: 200  -  total flux cleaned = 0.00050258 Jy
! Total flux subtracted in 200 components = 0.00050258 Jy
! Clean residual min=-0.006772 max=0.005846 Jy/beam
! Clean residual mean=0.000091 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.583999 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 109 components and 0.583998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084966Jy  sigma=0.885139
! Fit after  self-cal, rms=0.084984Jy  sigma=0.884563
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000325151 Jy
! Component: 100  -  total flux cleaned = 6.81028e-05 Jy
! Component: 150  -  total flux cleaned = -8.52359e-05 Jy
! Component: 200  -  total flux cleaned = -0.000227655 Jy
! Total flux subtracted in 200 components = -0.000227655 Jy
! Clean residual min=-0.006718 max=0.005722 Jy/beam
! Clean residual mean=0.000088 rms=0.001506 Jy/beam
! Combined flux in latest and established models = 0.583771 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 126 components and 0.583771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084784Jy  sigma=0.882600
! Fit after  self-cal, rms=0.084783Jy  sigma=0.882309
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084783Jy  sigma=0.882309
! Fit after  self-cal, rms=0.079100Jy  sigma=0.837167
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.207 mas, bmaj=15.63 mas, bpa=-13.35 degrees
! Estimated noise=1.52224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000892806 Jy
! Component: 100  -  total flux cleaned = -0.00139256 Jy
! Component: 150  -  total flux cleaned = -0.00155844 Jy
! Component: 200  -  total flux cleaned = -0.00163189 Jy
! Total flux subtracted in 200 components = -0.00163189 Jy
! Clean residual min=-0.005270 max=0.005232 Jy/beam
! Clean residual mean=0.000035 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.582139 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 137 components and 0.582139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078778Jy  sigma=0.834901
! Fit after  self-cal, rms=0.078786Jy  sigma=0.834635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224401 Jy
! Component: 100  -  total flux cleaned = 1.50097e-05 Jy
! Component: 150  -  total flux cleaned = -0.000108634 Jy
! Component: 200  -  total flux cleaned = -0.000281482 Jy
! Total flux subtracted in 200 components = -0.000281482 Jy
! Clean residual min=-0.005286 max=0.005196 Jy/beam
! Clean residual mean=0.000032 rms=0.001267 Jy/beam
! Combined flux in latest and established models = 0.581858 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 153 components and 0.581858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078638Jy  sigma=0.833593
! Fit after  self-cal, rms=0.078636Jy  sigma=0.833473
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078636Jy  sigma=0.833473
! Fit after  self-cal, rms=0.079050Jy  sigma=0.832753
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.815 mas, bmaj=27.66 mas, bpa=-8.352 degrees
! Estimated noise=1.74066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180838 Jy
! Component: 100  -  total flux cleaned = -0.00204456 Jy
! Component: 150  -  total flux cleaned = -0.0022476 Jy
! Component: 200  -  total flux cleaned = -0.00234002 Jy
! Total flux subtracted in 200 components = -0.00234002 Jy
! Clean residual min=-0.005209 max=0.004301 Jy/beam
! Clean residual mean=0.000036 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.579518 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 166 components and 0.579518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078905Jy  sigma=0.832079
! Fit after  self-cal, rms=0.078915Jy  sigma=0.831945
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.67105e-06 Jy
! Component: 100  -  total flux cleaned = -5.33781e-05 Jy
! Component: 150  -  total flux cleaned = -0.000136784 Jy
! Component: 200  -  total flux cleaned = -0.000175908 Jy
! Total flux subtracted in 200 components = -0.000175908 Jy
! Clean residual min=-0.005223 max=0.004337 Jy/beam
! Clean residual mean=0.000035 rms=0.001316 Jy/beam
! Combined flux in latest and established models = 0.579342 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 176 components and 0.579342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078840Jy  sigma=0.831503
! Fit after  self-cal, rms=0.078838Jy  sigma=0.831438
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.203 mas, bmaj=15.63 mas, bpa=-13.29 degrees
! Estimated noise=1.52282 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.203 x 15.63 at -13.29 degrees (North through East)
! Clean map  min=-0.0064891  max=0.41963 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=12.13 mas, bpa=-13.55 degrees
! Estimated noise=2.16804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.34579 Jy
! Component: 100  -  total flux cleaned = 0.432598 Jy
! Component: 150  -  total flux cleaned = 0.475368 Jy
! Component: 200  -  total flux cleaned = 0.503087 Jy
! Total flux subtracted in 200 components = 0.503087 Jy
! Clean residual min=-0.013589 max=0.017028 Jy/beam
! Clean residual mean=-0.000206 rms=0.003110 Jy/beam
! Combined flux in latest and established models = 0.503087 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.503087 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.203 mas, bmaj=15.63 mas, bpa=-13.29 degrees
! Estimated noise=1.52282 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0356889 Jy
! Component: 100  -  total flux cleaned = 0.0542869 Jy
! Component: 150  -  total flux cleaned = 0.0653385 Jy
! Component: 200  -  total flux cleaned = 0.0722258 Jy
! Total flux subtracted in 200 components = 0.0722258 Jy
! Clean residual min=-0.005354 max=0.006447 Jy/beam
! Clean residual mean=-0.000014 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.575313 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 92 components and 0.575313 Jy
! Inverting map 
! Added new window around map position (6, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354978 Jy
! Component: 100  -  total flux cleaned = 0.00491905 Jy
! Component: 150  -  total flux cleaned = 0.00559863 Jy
! Component: 200  -  total flux cleaned = 0.00571394 Jy
! Total flux subtracted in 200 components = 0.00571394 Jy
! Clean residual min=-0.005397 max=0.005042 Jy/beam
! Clean residual mean=0.000035 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.581027 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 123 components and 0.581027 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.815 mas, bmaj=27.66 mas, bpa=-8.352 degrees
! Estimated noise=1.74066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000291213 Jy
! Component: 100  -  total flux cleaned = -0.000209274 Jy
! Component: 150  -  total flux cleaned = -0.000207949 Jy
! Component: 200  -  total flux cleaned = -0.00014324 Jy
! Total flux subtracted in 200 components = -0.00014324 Jy
! Clean residual min=-0.004999 max=0.004125 Jy/beam
! Clean residual mean=0.000055 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 0.580884 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112769 Jy
! Component: 100  -  total flux cleaned = -0.000114897 Jy
! Component: 150  -  total flux cleaned = -0.000211184 Jy
! Component: 200  -  total flux cleaned = -0.000256568 Jy
! Total flux subtracted in 200 components = -0.000256568 Jy
! Clean residual min=-0.004982 max=0.004093 Jy/beam
! Clean residual mean=0.000054 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 0.580627 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 162 components and 0.580627 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.203 mas, bmaj=15.63 mas, bpa=-13.29 degrees
! Estimated noise=1.52282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000104833 Jy
! Component: 100  -  total flux cleaned = 2.22946e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100232 Jy
! Component: 200  -  total flux cleaned = 0.000100056 Jy
! Total flux subtracted in 200 components = 0.000100056 Jy
! Clean residual min=-0.005480 max=0.004730 Jy/beam
! Clean residual mean=0.000037 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.580727 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 182 components and 0.580727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078594Jy  sigma=0.830632
! Fit after  self-cal, rms=0.078514Jy  sigma=0.829622
wmodel J0336-3616_S_map.mod
! Writing 182 model components to file: J0336-3616_S_map.mod
wobs   J0336-3616_S_uvs.fits
! Writing UV FITS file: J0336-3616_S_uvs.fits
wwins  J0336-3616_S_map.win
! wwins: Wrote 5 windows to J0336-3616_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00167944 Jy
! Component: 100  -  total flux cleaned = -0.00216585 Jy
! Component: 150  -  total flux cleaned = -0.00231574 Jy
! Component: 200  -  total flux cleaned = -0.00259491 Jy
! Component: 250  -  total flux cleaned = -0.00293016 Jy
! Component: 300  -  total flux cleaned = -0.00325297 Jy
! Component: 350  -  total flux cleaned = -0.00356112 Jy
! Component: 400  -  total flux cleaned = -0.00373836 Jy
! Component: 450  -  total flux cleaned = -0.00385538 Jy
! Component: 500  -  total flux cleaned = -0.00419816 Jy
! Component: 550  -  total flux cleaned = -0.00442247 Jy
! Component: 600  -  total flux cleaned = -0.00464298 Jy
! Component: 650  -  total flux cleaned = -0.00469824 Jy
! Component: 700  -  total flux cleaned = -0.00496414 Jy
! Component: 750  -  total flux cleaned = -0.00506824 Jy
! Component: 800  -  total flux cleaned = -0.00506815 Jy
! Component: 850  -  total flux cleaned = -0.00501734 Jy
! Component: 900  -  total flux cleaned = -0.00506799 Jy
! Component: 950  -  total flux cleaned = -0.0050186 Jy
! Component: 1000  -  total flux cleaned = -0.00497056 Jy
! Component: 1050  -  total flux cleaned = -0.00497153 Jy
! Component: 1100  -  total flux cleaned = -0.00497212 Jy
! Component: 1150  -  total flux cleaned = -0.00497241 Jy
! Component: 1200  -  total flux cleaned = -0.005019 Jy
! Component: 1250  -  total flux cleaned = -0.00511027 Jy
! Component: 1300  -  total flux cleaned = -0.00511096 Jy
! Component: 1350  -  total flux cleaned = -0.00520065 Jy
! Component: 1400  -  total flux cleaned = -0.00537737 Jy
! Component: 1450  -  total flux cleaned = -0.0052906 Jy
! Component: 1500  -  total flux cleaned = -0.00546379 Jy
! Component: 1550  -  total flux cleaned = -0.00550617 Jy
! Component: 1600  -  total flux cleaned = -0.00559088 Jy
! Component: 1650  -  total flux cleaned = -0.00563333 Jy
! Component: 1700  -  total flux cleaned = -0.00571669 Jy
! Component: 1750  -  total flux cleaned = -0.00567595 Jy
! Component: 1800  -  total flux cleaned = -0.00592033 Jy
! Component: 1850  -  total flux cleaned = -0.00596067 Jy
! Component: 1900  -  total flux cleaned = -0.00604063 Jy
! Component: 1950  -  total flux cleaned = -0.00600123 Jy
! Component: 2000  -  total flux cleaned = -0.00600146 Jy
! Component: 2050  -  total flux cleaned = -0.00615711 Jy
! Component: 2100  -  total flux cleaned = -0.00615706 Jy
! Component: 2150  -  total flux cleaned = -0.00607998 Jy
! Component: 2200  -  total flux cleaned = -0.00619404 Jy
! Component: 2250  -  total flux cleaned = -0.00619415 Jy
! Component: 2300  -  total flux cleaned = -0.00619374 Jy
! Component: 2350  -  total flux cleaned = -0.00619399 Jy
! Component: 2400  -  total flux cleaned = -0.00626749 Jy
! Component: 2450  -  total flux cleaned = -0.00630401 Jy
! Component: 2500  -  total flux cleaned = -0.00644832 Jy
! Component: 2550  -  total flux cleaned = -0.00637634 Jy
! Component: 2600  -  total flux cleaned = -0.00648318 Jy
! Component: 2650  -  total flux cleaned = -0.00648327 Jy
! Component: 2700  -  total flux cleaned = -0.00669415 Jy
! Component: 2750  -  total flux cleaned = -0.00662453 Jy
! Component: 2800  -  total flux cleaned = -0.00683229 Jy
! Component: 2850  -  total flux cleaned = -0.00683208 Jy
! Component: 2900  -  total flux cleaned = -0.00696866 Jy
! Component: 2950  -  total flux cleaned = -0.00700269 Jy
! Component: 3000  -  total flux cleaned = -0.00713709 Jy
! Component: 3050  -  total flux cleaned = -0.0071708 Jy
! Component: 3100  -  total flux cleaned = -0.00723789 Jy
! Component: 3150  -  total flux cleaned = -0.00743578 Jy
! Component: 3200  -  total flux cleaned = -0.00740327 Jy
! Component: 3250  -  total flux cleaned = -0.00763153 Jy
! Component: 3300  -  total flux cleaned = -0.00776085 Jy
! Component: 3350  -  total flux cleaned = -0.00795316 Jy
! Component: 3400  -  total flux cleaned = -0.00798482 Jy
! Component: 3450  -  total flux cleaned = -0.00801694 Jy
! Component: 3500  -  total flux cleaned = -0.00814327 Jy
! Component: 3550  -  total flux cleaned = -0.00833148 Jy
! Component: 3600  -  total flux cleaned = -0.00830037 Jy
! Component: 3650  -  total flux cleaned = -0.00851697 Jy
! Component: 3700  -  total flux cleaned = -0.00848599 Jy
! Component: 3750  -  total flux cleaned = -0.00860829 Jy
! Component: 3800  -  total flux cleaned = -0.00863874 Jy
! Component: 3850  -  total flux cleaned = -0.00869908 Jy
! Component: 3900  -  total flux cleaned = -0.00890974 Jy
! Component: 3950  -  total flux cleaned = -0.00905936 Jy
! Component: 4000  -  total flux cleaned = -0.00920792 Jy
! Component: 4050  -  total flux cleaned = -0.00932599 Jy
! Total flux subtracted in 4096 components = -0.00941434 Jy
! Clean residual min=-0.001682 max=0.001619 Jy/beam
! Clean residual mean=0.000019 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.571313 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 482 components and 0.571313 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv121_uvs/J0336-3616_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.203 x 15.63 at -13.29 degrees (North through East)
! Clean map  min=-0.0047496  max=0.42754 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv121_uvs/J0336-3616_S_map.fits
wmodel /scr/pima/rv121_uvs/J0336-3616_S_map.mod
! Writing 482 model components to file: /scr/pima/rv121_uvs/J0336-3616_S_map.mod
wobs   /scr/pima/rv121_uvs/J0336-3616_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv121_uvs/J0336-3616_S_uvs.fits
wwins  /scr/pima/rv121_uvs/J0336-3616_S_map.win
! wwins: Wrote 6 windows to /scr/pima/rv121_uvs/J0336-3616_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.427535 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000599953 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.420985 0.420985 0.84197 1.68394 3.36788 6.73576 13.4715 26.943 53.8861
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.427 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  712.614 
quit
! Quitting program
! Log file /scr/pima/rv121_uvs/J0336-3616_S_dfm.log closed on Sat Jul 28 00:08:24 2018