! Started logfile: /scr/pima/rv121_uvs/J0106-4034_S_dfm.log on Sat Jul 28 00:07:44 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv121_uvs/J0106-4034_S_uva.fits
! Reading UV FITS file: /scr/pima/rv121_uvs/J0106-4034_S_uva.fits
! AN table 1: 23 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.43323 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0106-4034
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 1116 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0106-4034_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 126 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.229151Jy  sigma=14.863387
! Fit after  self-cal, rms=0.316460Jy  sigma=3.591962
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=9.858 mas, bpa=-0.3545 degrees
! Estimated noise=2.97711 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.54317 Jy
! Component: 100  -  total flux cleaned = 0.661617 Jy
! Total flux subtracted in 100 components = 0.661617 Jy
! Clean residual min=-0.025150 max=0.053122 Jy/beam
! Clean residual mean=-0.000051 rms=0.006549 Jy/beam
! Combined flux in latest and established models = 0.661617 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.661617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129967Jy  sigma=1.516646
! Fit after  self-cal, rms=0.129965Jy  sigma=1.516636
! Inverting map 
! Added new window around map position (6.5, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0453387 Jy
! Component: 100  -  total flux cleaned = 0.0612011 Jy
! Total flux subtracted in 100 components = 0.0612011 Jy
! Clean residual min=-0.022501 max=0.039961 Jy/beam
! Clean residual mean=0.000013 rms=0.005331 Jy/beam
! Combined flux in latest and established models = 0.722818 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.722818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111841Jy  sigma=1.304258
! Fit after  self-cal, rms=0.109558Jy  sigma=1.273682
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.844 mas, bmaj=13.68 mas, bpa=-0.682 degrees
! Estimated noise=2.23774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.5, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0282174 Jy
! Component: 100  -  total flux cleaned = 0.0340324 Jy
! Component: 150  -  total flux cleaned = 0.0358345 Jy
! Component: 200  -  total flux cleaned = 0.0371909 Jy
! Total flux subtracted in 200 components = 0.0371909 Jy
! Clean residual min=-0.016078 max=0.015821 Jy/beam
! Clean residual mean=0.000026 rms=0.003653 Jy/beam
! Combined flux in latest and established models = 0.760009 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.760009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101177Jy  sigma=1.180424
! Fit after  self-cal, rms=0.100996Jy  sigma=1.178459
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.844 x 13.68 at -0.682 degrees (North through East)
! Clean map  min=-0.014801  max=0.66557 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.02     LA        1.02     MK        1.00     
!   NL        1.06     OV        0.99     PT        1.01     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        0.99     LA        1.01     MK        1.00     
!   NL        1.13     OV        1.09     PT        1.02     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.00*    LA        0.93     MK        0.83     
!   NL        1.00*    OV        0.94     PT        1.00     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.97     LA        1.02     MK        1.08     
!   NL        1.11     OV        0.93     PT        1.00     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.100996Jy  sigma=1.178459
! Fit after  self-cal, rms=0.090308Jy  sigma=1.012856
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.772 mas, bmaj=13.41 mas, bpa=-0.8249 degrees
! Estimated noise=2.28261 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00337833 Jy
! Component: 100  -  total flux cleaned = -0.00445757 Jy
! Component: 150  -  total flux cleaned = -0.00519476 Jy
! Component: 200  -  total flux cleaned = -0.00568643 Jy
! Total flux subtracted in 200 components = -0.00568643 Jy
! Clean residual min=-0.010763 max=0.010601 Jy/beam
! Clean residual mean=0.000066 rms=0.002893 Jy/beam
! Combined flux in latest and established models = 0.754323 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 57 components and 0.754323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089586Jy  sigma=1.000237
! Fit after  self-cal, rms=0.089587Jy  sigma=0.999891
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089587Jy  sigma=0.999891
! Fit after  self-cal, rms=0.077604Jy  sigma=0.833754
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.778 mas, bmaj=13.47 mas, bpa=-0.6429 degrees
! Estimated noise=2.28499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00245923 Jy
! Component: 100  -  total flux cleaned = -0.00245864 Jy
! Component: 150  -  total flux cleaned = -0.00244929 Jy
! Component: 200  -  total flux cleaned = -0.00256482 Jy
! Total flux subtracted in 200 components = -0.00256482 Jy
! Clean residual min=-0.007374 max=0.007316 Jy/beam
! Clean residual mean=-0.000013 rms=0.002056 Jy/beam
! Combined flux in latest and established models = 0.751758 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 0.751758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077127Jy  sigma=0.827356
! Fit after  self-cal, rms=0.077158Jy  sigma=0.827048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000379324 Jy
! Component: 100  -  total flux cleaned = -0.000380499 Jy
! Component: 150  -  total flux cleaned = -0.000478795 Jy
! Component: 200  -  total flux cleaned = -0.000480516 Jy
! Total flux subtracted in 200 components = -0.000480516 Jy
! Clean residual min=-0.007342 max=0.007289 Jy/beam
! Clean residual mean=-0.000016 rms=0.002033 Jy/beam
! Combined flux in latest and established models = 0.751277 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 86 components and 0.751278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076921Jy  sigma=0.824254
! Fit after  self-cal, rms=0.076927Jy  sigma=0.824197
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076927Jy  sigma=0.824197
! Fit after  self-cal, rms=0.071821Jy  sigma=0.752107
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.778 mas, bmaj=13.46 mas, bpa=-0.5903 degrees
! Estimated noise=2.28311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111885 Jy
! Component: 100  -  total flux cleaned = -0.00121735 Jy
! Component: 150  -  total flux cleaned = -0.0013865 Jy
! Component: 200  -  total flux cleaned = -0.00146342 Jy
! Total flux subtracted in 200 components = -0.00146342 Jy
! Clean residual min=-0.007083 max=0.006254 Jy/beam
! Clean residual mean=-0.000072 rms=0.001659 Jy/beam
! Combined flux in latest and established models = 0.749814 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.749814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071588Jy  sigma=0.749359
! Fit after  self-cal, rms=0.071620Jy  sigma=0.749196
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000183144 Jy
! Component: 100  -  total flux cleaned = -0.000251667 Jy
! Component: 150  -  total flux cleaned = -0.000251291 Jy
! Component: 200  -  total flux cleaned = -0.000312359 Jy
! Total flux subtracted in 200 components = -0.000312359 Jy
! Clean residual min=-0.006963 max=0.006121 Jy/beam
! Clean residual mean=-0.000072 rms=0.001645 Jy/beam
! Combined flux in latest and established models = 0.749502 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 124 components and 0.749502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071504Jy  sigma=0.747776
! Fit after  self-cal, rms=0.071507Jy  sigma=0.747742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071507Jy  sigma=0.747742
! Fit after  self-cal, rms=0.071491Jy  sigma=0.747113
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.884 mas, bmaj=33.06 mas, bpa=0.6203 degrees
! Estimated noise=2.71354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00039998 Jy
! Component: 100  -  total flux cleaned = -0.000467949 Jy
! Component: 150  -  total flux cleaned = -0.000466844 Jy
! Component: 200  -  total flux cleaned = -0.000413381 Jy
! Total flux subtracted in 200 components = -0.000413381 Jy
! Clean residual min=-0.006452 max=0.006030 Jy/beam
! Clean residual mean=-0.000109 rms=0.001954 Jy/beam
! Combined flux in latest and established models = 0.749088 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 134 components and 0.749088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071398Jy  sigma=0.746274
! Fit after  self-cal, rms=0.071396Jy  sigma=0.746125
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021202 Jy
! Component: 100  -  total flux cleaned = 0.00021125 Jy
! Component: 150  -  total flux cleaned = 0.000211523 Jy
! Component: 200  -  total flux cleaned = 0.000213943 Jy
! Total flux subtracted in 200 components = 0.000213943 Jy
! Clean residual min=-0.006356 max=0.005888 Jy/beam
! Clean residual mean=-0.000107 rms=0.001938 Jy/beam
! Combined flux in latest and established models = 0.749302 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 138 components and 0.749302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071372Jy  sigma=0.746007
! Fit after  self-cal, rms=0.071372Jy  sigma=0.745939
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=13.44 mas, bpa=-0.5705 degrees
! Estimated noise=2.281 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.775 x 13.44 at -0.5705 degrees (North through East)
! Clean map  min=-0.0088731  max=0.67354 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071372Jy  sigma=0.745939
! Fit after  self-cal, rms=0.066532Jy  sigma=0.684338
! Inverting map and beam 
! Estimated beam: bmin=3.774 mas, bmaj=13.43 mas, bpa=-0.5797 degrees
! Estimated noise=2.28058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103689 Jy
! Component: 100  -  total flux cleaned = -0.00123134 Jy
! Component: 150  -  total flux cleaned = -0.00123448 Jy
! Component: 200  -  total flux cleaned = -0.00123343 Jy
! Total flux subtracted in 200 components = -0.00123343 Jy
! Clean residual min=-0.006588 max=0.005903 Jy/beam
! Clean residual mean=-0.000069 rms=0.001605 Jy/beam
! Combined flux in latest and established models = 0.748069 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 161 components and 0.748069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066422Jy  sigma=0.682829
! Fit after  self-cal, rms=0.066427Jy  sigma=0.682759
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000268397 Jy
! Component: 100  -  total flux cleaned = -0.000117685 Jy
! Component: 150  -  total flux cleaned = -0.000118781 Jy
! Component: 200  -  total flux cleaned = -7.19266e-05 Jy
! Total flux subtracted in 200 components = -7.19266e-05 Jy
! Clean residual min=-0.006573 max=0.005865 Jy/beam
! Clean residual mean=-0.000069 rms=0.001595 Jy/beam
! Combined flux in latest and established models = 0.747997 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 175 components and 0.747997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066365Jy  sigma=0.681849
! Fit after  self-cal, rms=0.066369Jy  sigma=0.681816
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066369Jy  sigma=0.681816
! Fit after  self-cal, rms=0.066372Jy  sigma=0.681514
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=9.797 mas, bpa=-0.256 degrees
! Estimated noise=3.0119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.548574 Jy
! Component: 100  -  total flux cleaned = 0.670045 Jy
! Component: 150  -  total flux cleaned = 0.707351 Jy
! Component: 200  -  total flux cleaned = 0.723025 Jy
! Total flux subtracted in 200 components = 0.723025 Jy
! Clean residual min=-0.009745 max=0.009558 Jy/beam
! Clean residual mean=-0.000021 rms=0.002462 Jy/beam
! Combined flux in latest and established models = 0.723025 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.723025 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=13.42 mas, bpa=-0.5787 degrees
! Estimated noise=2.27916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153689 Jy
! Component: 100  -  total flux cleaned = 0.0202566 Jy
! Component: 150  -  total flux cleaned = 0.0221949 Jy
! Component: 200  -  total flux cleaned = 0.0231427 Jy
! Total flux subtracted in 200 components = 0.0231427 Jy
! Clean residual min=-0.006649 max=0.005754 Jy/beam
! Clean residual mean=-0.000072 rms=0.001686 Jy/beam
! Combined flux in latest and established models = 0.746167 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 63 components and 0.746167 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.893 mas, bmaj=33.08 mas, bpa=0.6587 degrees
! Estimated noise=2.71255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213455 Jy
! Component: 100  -  total flux cleaned = 0.00213772 Jy
! Component: 150  -  total flux cleaned = 0.00214477 Jy
! Component: 200  -  total flux cleaned = 0.00224171 Jy
! Total flux subtracted in 200 components = 0.00224171 Jy
! Clean residual min=-0.006783 max=0.006040 Jy/beam
! Clean residual mean=-0.000096 rms=0.001942 Jy/beam
! Combined flux in latest and established models = 0.748409 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.73451e-06 Jy
! Component: 100  -  total flux cleaned = 8.8824e-06 Jy
! Component: 150  -  total flux cleaned = 9.16794e-06 Jy
! Component: 200  -  total flux cleaned = 8.11266e-06 Jy
! Total flux subtracted in 200 components = 8.11266e-06 Jy
! Clean residual min=-0.006644 max=0.006030 Jy/beam
! Clean residual mean=-0.000096 rms=0.001926 Jy/beam
! Combined flux in latest and established models = 0.748417 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 99 components and 0.748417 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=13.42 mas, bpa=-0.5787 degrees
! Estimated noise=2.27916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000743141 Jy
! Component: 100  -  total flux cleaned = -0.000744793 Jy
! Component: 150  -  total flux cleaned = -0.000850774 Jy
! Component: 200  -  total flux cleaned = -0.000939795 Jy
! Total flux subtracted in 200 components = -0.000939795 Jy
! Clean residual min=-0.006361 max=0.005838 Jy/beam
! Clean residual mean=-0.000066 rms=0.001611 Jy/beam
! Combined flux in latest and established models = 0.747477 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 113 components and 0.747477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066725Jy  sigma=0.684579
! Fit after  self-cal, rms=0.066626Jy  sigma=0.683694
wmodel J0106-4034_S_map.mod
! Writing 113 model components to file: J0106-4034_S_map.mod
wobs   J0106-4034_S_uvs.fits
! Writing UV FITS file: J0106-4034_S_uvs.fits
wwins  J0106-4034_S_map.win
! wwins: Wrote 3 windows to J0106-4034_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00183367 Jy
! Component: 100  -  total flux cleaned = -0.00335219 Jy
! Component: 150  -  total flux cleaned = -0.0042025 Jy
! Component: 200  -  total flux cleaned = -0.00483095 Jy
! Component: 250  -  total flux cleaned = -0.00508923 Jy
! Component: 300  -  total flux cleaned = -0.00500627 Jy
! Component: 350  -  total flux cleaned = -0.00468182 Jy
! Component: 400  -  total flux cleaned = -0.00444483 Jy
! Component: 450  -  total flux cleaned = -0.00421409 Jy
! Component: 500  -  total flux cleaned = -0.0039896 Jy
! Component: 550  -  total flux cleaned = -0.00369566 Jy
! Component: 600  -  total flux cleaned = -0.00355182 Jy
! Component: 650  -  total flux cleaned = -0.00355198 Jy
! Component: 700  -  total flux cleaned = -0.00362087 Jy
! Component: 750  -  total flux cleaned = -0.00375679 Jy
! Component: 800  -  total flux cleaned = -0.00368888 Jy
! Component: 850  -  total flux cleaned = -0.00355648 Jy
! Component: 900  -  total flux cleaned = -0.00336126 Jy
! Component: 950  -  total flux cleaned = -0.00342632 Jy
! Component: 1000  -  total flux cleaned = -0.00342676 Jy
! Component: 1050  -  total flux cleaned = -0.00323852 Jy
! Component: 1100  -  total flux cleaned = -0.00317622 Jy
! Component: 1150  -  total flux cleaned = -0.00299382 Jy
! Component: 1200  -  total flux cleaned = -0.00287395 Jy
! Component: 1250  -  total flux cleaned = -0.00269532 Jy
! Component: 1300  -  total flux cleaned = -0.00251866 Jy
! Component: 1350  -  total flux cleaned = -0.00240263 Jy
! Component: 1400  -  total flux cleaned = -0.00211617 Jy
! Component: 1450  -  total flux cleaned = -0.00183388 Jy
! Component: 1500  -  total flux cleaned = -0.00160979 Jy
! Component: 1550  -  total flux cleaned = -0.00150068 Jy
! Component: 1600  -  total flux cleaned = -0.00150121 Jy
! Component: 1650  -  total flux cleaned = -0.00144738 Jy
! Component: 1700  -  total flux cleaned = -0.00128679 Jy
! Component: 1750  -  total flux cleaned = -0.00123379 Jy
! Component: 1800  -  total flux cleaned = -0.000918181 Jy
! Component: 1850  -  total flux cleaned = -0.000969802 Jy
! Component: 1900  -  total flux cleaned = -0.000660032 Jy
! Component: 1950  -  total flux cleaned = -0.000710472 Jy
! Component: 2000  -  total flux cleaned = -0.000659474 Jy
! Component: 2050  -  total flux cleaned = -0.000559134 Jy
! Component: 2100  -  total flux cleaned = -0.000409386 Jy
! Component: 2150  -  total flux cleaned = -0.000359921 Jy
! Component: 2200  -  total flux cleaned = -0.000116138 Jy
! Component: 2250  -  total flux cleaned = -6.8304e-05 Jy
! Component: 2300  -  total flux cleaned = -6.79331e-05 Jy
! Component: 2350  -  total flux cleaned = -1.97675e-05 Jy
! Component: 2400  -  total flux cleaned = 0.000215743 Jy
! Component: 2450  -  total flux cleaned = 0.000308955 Jy
! Component: 2500  -  total flux cleaned = 0.000262168 Jy
! Component: 2550  -  total flux cleaned = 0.000446509 Jy
! Component: 2600  -  total flux cleaned = 0.000582693 Jy
! Component: 2650  -  total flux cleaned = 0.000627469 Jy
! Component: 2700  -  total flux cleaned = 0.000672571 Jy
! Component: 2750  -  total flux cleaned = 0.000984086 Jy
! Component: 2800  -  total flux cleaned = 0.00102806 Jy
! Component: 2850  -  total flux cleaned = 0.00120268 Jy
! Component: 2900  -  total flux cleaned = 0.00124607 Jy
! Component: 2950  -  total flux cleaned = 0.00141884 Jy
! Component: 3000  -  total flux cleaned = 0.0015478 Jy
! Component: 3050  -  total flux cleaned = 0.00176041 Jy
! Component: 3100  -  total flux cleaned = 0.00188715 Jy
! Component: 3150  -  total flux cleaned = 0.00205444 Jy
! Component: 3200  -  total flux cleaned = 0.002138 Jy
! Component: 3250  -  total flux cleaned = 0.00230305 Jy
! Component: 3300  -  total flux cleaned = 0.00230339 Jy
! Component: 3350  -  total flux cleaned = 0.00254806 Jy
! Component: 3400  -  total flux cleaned = 0.00258833 Jy
! Component: 3450  -  total flux cleaned = 0.00270886 Jy
! Component: 3500  -  total flux cleaned = 0.00286861 Jy
! Component: 3550  -  total flux cleaned = 0.00306669 Jy
! Component: 3600  -  total flux cleaned = 0.00322394 Jy
! Component: 3650  -  total flux cleaned = 0.00330192 Jy
! Component: 3700  -  total flux cleaned = 0.00326272 Jy
! Component: 3750  -  total flux cleaned = 0.00361051 Jy
! Component: 3800  -  total flux cleaned = 0.00364848 Jy
! Component: 3850  -  total flux cleaned = 0.00372496 Jy
! Component: 3900  -  total flux cleaned = 0.00383853 Jy
! Component: 3950  -  total flux cleaned = 0.00398963 Jy
! Component: 4000  -  total flux cleaned = 0.00413937 Jy
! Component: 4050  -  total flux cleaned = 0.00417652 Jy
! Total flux subtracted in 4096 components = 0.00439803 Jy
! Clean residual min=-0.002183 max=0.002397 Jy/beam
! Clean residual mean=0.000024 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.751876 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 410 components and 0.751875 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv121_uvs/J0106-4034_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.771 x 13.42 at -0.5787 degrees (North through East)
! Clean map  min=-0.0076585  max=0.67955 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv121_uvs/J0106-4034_S_map.fits
wmodel /scr/pima/rv121_uvs/J0106-4034_S_map.mod
! Writing 410 model components to file: /scr/pima/rv121_uvs/J0106-4034_S_map.mod
wobs   /scr/pima/rv121_uvs/J0106-4034_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv121_uvs/J0106-4034_S_uvs.fits
wwins  /scr/pima/rv121_uvs/J0106-4034_S_map.win
! wwins: Wrote 4 windows to /scr/pima/rv121_uvs/J0106-4034_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.679547 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00074877 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.33056 0.33056 0.66112 1.32224 2.64448 5.28896 10.5779 21.1558 42.3117 84.6233
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.679 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  907.551 
quit
! Quitting program
! Log file /scr/pima/rv121_uvs/J0106-4034_S_dfm.log closed on Sat Jul 28 00:07:48 2018