! Started logfile: /scr/pima/rv120_uvs/J2329-4730_X_dfm.log on Fri Dec 22 22:45:22 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv120_uvs/J2329-4730_X_uva.fits
! Reading UV FITS file: /scr/pima/rv120_uvs/J2329-4730_X_uva.fits
! AN table 1: 7 integrations on 6 of 6 possible baselines.
! AN table 2: 13 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.409524 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2329-4730
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 516 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2329-4730_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.115677Jy  sigma=15.308715
! Fit after  self-cal, rms=0.599738Jy  sigma=8.309943
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7388 mas, bmaj=4.948 mas, bpa=-5.41 degrees
! Estimated noise=3.59084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.367596 Jy
! Component: 100  -  total flux cleaned = 0.456132 Jy
! Total flux subtracted in 100 components = 0.456132 Jy
! Clean residual min=-0.060159 max=0.134461 Jy/beam
! Clean residual mean=-0.000131 rms=0.018890 Jy/beam
! Combined flux in latest and established models = 0.456132 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.456132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.299988Jy  sigma=4.050601
! Fit after  self-cal, rms=0.300087Jy  sigma=4.050227
! Inverting map 
! Added new window around map position (7.8, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130116 Jy
! Component: 100  -  total flux cleaned = 0.203764 Jy
! Total flux subtracted in 100 components = 0.203764 Jy
! Clean residual min=-0.051806 max=0.049445 Jy/beam
! Clean residual mean=0.000003 rms=0.011726 Jy/beam
! Combined flux in latest and established models = 0.659897 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 42 components and 0.659896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197068Jy  sigma=2.612687
! Fit after  self-cal, rms=0.188936Jy  sigma=2.508527
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9915 mas, bmaj=6.623 mas, bpa=-5.319 degrees
! Estimated noise=2.75098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0953961 Jy
! Component: 100  -  total flux cleaned = 0.161052 Jy
! Component: 150  -  total flux cleaned = 0.208308 Jy
! Component: 200  -  total flux cleaned = 0.242642 Jy
! Total flux subtracted in 200 components = 0.242642 Jy
! Clean residual min=-0.038826 max=0.040611 Jy/beam
! Clean residual mean=0.000152 rms=0.010760 Jy/beam
! Combined flux in latest and established models = 0.902538 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 93 components and 0.902538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111857Jy  sigma=1.466500
! Fit after  self-cal, rms=0.109597Jy  sigma=1.435211
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9915 x 6.623 at -5.319 degrees (North through East)
! Clean map  min=-0.040343  max=0.53381 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        1.00     PT        0.91     SC        1.13     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.91     KK        1.17     KP        1.00     LA        0.91     
!   MK        0.97     OV        1.14     PT        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        0.97     PT        0.85     SC        1.02     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.92     KK        1.10     KP        0.96     LA        0.93     
!   MK        0.94     OV        1.16     PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     KP        1.03     PT        0.92     SC        0.98     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     KK        1.12     KP        0.91     LA        0.99     
!   MK        0.93     OV        1.12     PT        0.90     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        0.99     PT        0.95     SC        0.97     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.92     KK        1.13     KP        0.92     LA        0.95     
!   MK        1.03     OV        1.13     PT        0.92     
! 
! 
! Fit before self-cal, rms=0.109597Jy  sigma=1.435211
! Fit after  self-cal, rms=0.085879Jy  sigma=1.117362
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9656 mas, bmaj=6.691 mas, bpa=-6.313 degrees
! Estimated noise=2.86562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183848 Jy
! Component: 100  -  total flux cleaned = 0.0179403 Jy
! Component: 150  -  total flux cleaned = 0.0188234 Jy
! Component: 200  -  total flux cleaned = 0.0193891 Jy
! Total flux subtracted in 200 components = 0.0193891 Jy
! Clean residual min=-0.021464 max=0.023631 Jy/beam
! Clean residual mean=0.000169 rms=0.005235 Jy/beam
! Combined flux in latest and established models = 0.921927 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 110 components and 0.921927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082085Jy  sigma=1.036764
! Fit after  self-cal, rms=0.081838Jy  sigma=1.030221
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081838Jy  sigma=1.030221
! Fit after  self-cal, rms=0.081478Jy  sigma=1.026198
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9639 mas, bmaj=6.714 mas, bpa=-6.365 degrees
! Estimated noise=2.85476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903505 Jy
! Component: 100  -  total flux cleaned = 0.000676367 Jy
! Component: 150  -  total flux cleaned = 0.000678076 Jy
! Component: 200  -  total flux cleaned = 0.00101174 Jy
! Total flux subtracted in 200 components = 0.00101174 Jy
! Clean residual min=-0.020640 max=0.021643 Jy/beam
! Clean residual mean=0.000168 rms=0.004983 Jy/beam
! Combined flux in latest and established models = 0.922939 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 114 components and 0.922939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080331Jy  sigma=1.011852
! Fit after  self-cal, rms=0.080298Jy  sigma=1.010567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165538 Jy
! Component: 100  -  total flux cleaned = 0.000309866 Jy
! Component: 150  -  total flux cleaned = 0.00101828 Jy
! Component: 200  -  total flux cleaned = 0.00141709 Jy
! Total flux subtracted in 200 components = 0.00141709 Jy
! Clean residual min=-0.020432 max=0.021082 Jy/beam
! Clean residual mean=0.000171 rms=0.004924 Jy/beam
! Combined flux in latest and established models = 0.924356 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 123 components and 0.924356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079646Jy  sigma=1.003230
! Fit after  self-cal, rms=0.079632Jy  sigma=1.002526
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079632Jy  sigma=1.002526
! Fit after  self-cal, rms=0.076500Jy  sigma=0.962684
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9624 mas, bmaj=6.75 mas, bpa=-6.447 degrees
! Estimated noise=2.84271 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00312798 Jy
! Component: 100  -  total flux cleaned = -0.00406292 Jy
! Component: 150  -  total flux cleaned = -0.00406408 Jy
! Component: 200  -  total flux cleaned = -0.00381867 Jy
! Total flux subtracted in 200 components = -0.00381867 Jy
! Clean residual min=-0.019045 max=0.019271 Jy/beam
! Clean residual mean=0.000012 rms=0.004488 Jy/beam
! Combined flux in latest and established models = 0.920537 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 129 components and 0.920537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075739Jy  sigma=0.954395
! Fit after  self-cal, rms=0.075717Jy  sigma=0.953556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000778866 Jy
! Component: 100  -  total flux cleaned = -0.000296793 Jy
! Component: 150  -  total flux cleaned = 0.000259881 Jy
! Component: 200  -  total flux cleaned = 0.00068077 Jy
! Total flux subtracted in 200 components = 0.00068077 Jy
! Clean residual min=-0.018929 max=0.018944 Jy/beam
! Clean residual mean=0.000015 rms=0.004456 Jy/beam
! Combined flux in latest and established models = 0.921218 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 132 components and 0.921218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075325Jy  sigma=0.948870
! Fit after  self-cal, rms=0.075329Jy  sigma=0.948449
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075329Jy  sigma=0.948449
! Fit after  self-cal, rms=0.074900Jy  sigma=0.945756
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.29 mas, bmaj=17.01 mas, bpa=4.382 degrees
! Estimated noise=3.30639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308254 Jy
! Component: 100  -  total flux cleaned = 0.00387235 Jy
! Component: 150  -  total flux cleaned = 0.00445746 Jy
! Component: 200  -  total flux cleaned = 0.00513204 Jy
! Total flux subtracted in 200 components = 0.00513204 Jy
! Clean residual min=-0.019506 max=0.019541 Jy/beam
! Clean residual mean=0.000020 rms=0.005704 Jy/beam
! Combined flux in latest and established models = 0.92635 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 134 components and 0.92635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074979Jy  sigma=0.943532
! Fit after  self-cal, rms=0.074964Jy  sigma=0.942676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345702 Jy
! Component: 100  -  total flux cleaned = 0.000722216 Jy
! Component: 150  -  total flux cleaned = 0.00129931 Jy
! Component: 200  -  total flux cleaned = 0.00173021 Jy
! Total flux subtracted in 200 components = 0.00173021 Jy
! Clean residual min=-0.019247 max=0.019223 Jy/beam
! Clean residual mean=0.000024 rms=0.005661 Jy/beam
! Combined flux in latest and established models = 0.92808 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 136 components and 0.92808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075166Jy  sigma=0.945764
! Fit after  self-cal, rms=0.075169Jy  sigma=0.944889
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9605 mas, bmaj=6.78 mas, bpa=-6.525 degrees
! Estimated noise=2.83029 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9605 x 6.78 at -6.525 degrees (North through East)
! Clean map  min=-0.017367  max=0.50804 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075169Jy  sigma=0.944889
! Fit after  self-cal, rms=0.070026Jy  sigma=0.861274
! Inverting map and beam 
! Estimated beam: bmin=0.9608 mas, bmaj=6.775 mas, bpa=-6.516 degrees
! Estimated noise=2.83606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00229281 Jy
! Component: 100  -  total flux cleaned = -0.00311761 Jy
! Component: 150  -  total flux cleaned = -0.0033737 Jy
! Component: 200  -  total flux cleaned = -0.00347805 Jy
! Total flux subtracted in 200 components = -0.00347805 Jy
! Clean residual min=-0.017895 max=0.017490 Jy/beam
! Clean residual mean=0.000010 rms=0.004216 Jy/beam
! Combined flux in latest and established models = 0.924602 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 149 components and 0.924602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069133Jy  sigma=0.851804
! Fit after  self-cal, rms=0.069094Jy  sigma=0.851171
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00068313 Jy
! Component: 100  -  total flux cleaned = -0.000672237 Jy
! Component: 150  -  total flux cleaned = -0.000763657 Jy
! Component: 200  -  total flux cleaned = -0.000590583 Jy
! Total flux subtracted in 200 components = -0.000590583 Jy
! Clean residual min=-0.017843 max=0.017256 Jy/beam
! Clean residual mean=0.000012 rms=0.004195 Jy/beam
! Combined flux in latest and established models = 0.924012 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 152 components and 0.924012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068760Jy  sigma=0.847770
! Fit after  self-cal, rms=0.068771Jy  sigma=0.847506
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068771Jy  sigma=0.847506
! Fit after  self-cal, rms=0.068515Jy  sigma=0.845344
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7416 mas, bmaj=5.14 mas, bpa=-6.626 degrees
! Estimated noise=3.72143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.363311 Jy
! Component: 100  -  total flux cleaned = 0.504665 Jy
! Component: 150  -  total flux cleaned = 0.599651 Jy
! Component: 200  -  total flux cleaned = 0.669998 Jy
! Total flux subtracted in 200 components = 0.669998 Jy
! Clean residual min=-0.040445 max=0.042682 Jy/beam
! Clean residual mean=0.000016 rms=0.010095 Jy/beam
! Combined flux in latest and established models = 0.669998 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 60 model components to the UV plane model.
! The established model now contains 60 components and 0.669998 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9595 mas, bmaj=6.792 mas, bpa=-6.565 degrees
! Estimated noise=2.82751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0772062 Jy
! Component: 100  -  total flux cleaned = 0.129671 Jy
! Component: 150  -  total flux cleaned = 0.166965 Jy
! Component: 200  -  total flux cleaned = 0.193964 Jy
! Total flux subtracted in 200 components = 0.193964 Jy
! Clean residual min=-0.025269 max=0.021508 Jy/beam
! Clean residual mean=0.000017 rms=0.006462 Jy/beam
! Combined flux in latest and established models = 0.863962 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 106 components and 0.863962 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.292 mas, bmaj=16.99 mas, bpa=4.331 degrees
! Estimated noise=3.30601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273777 Jy
! Component: 100  -  total flux cleaned = 0.0447632 Jy
! Component: 150  -  total flux cleaned = 0.0559875 Jy
! Component: 200  -  total flux cleaned = 0.0632511 Jy
! Total flux subtracted in 200 components = 0.0632511 Jy
! Clean residual min=-0.019288 max=0.019092 Jy/beam
! Clean residual mean=-0.000011 rms=0.005831 Jy/beam
! Combined flux in latest and established models = 0.927213 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380608 Jy
! Component: 100  -  total flux cleaned = 0.00463195 Jy
! Component: 150  -  total flux cleaned = 0.00540735 Jy
! Component: 200  -  total flux cleaned = 0.00626978 Jy
! Total flux subtracted in 200 components = 0.00626978 Jy
! Clean residual min=-0.018605 max=0.018337 Jy/beam
! Clean residual mean=-0.000012 rms=0.005637 Jy/beam
! Combined flux in latest and established models = 0.933483 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 127 components and 0.933483 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9595 mas, bmaj=6.792 mas, bpa=-6.565 degrees
! Estimated noise=2.82751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00261593 Jy
! Component: 100  -  total flux cleaned = -0.00331264 Jy
! Component: 150  -  total flux cleaned = -0.0035821 Jy
! Component: 200  -  total flux cleaned = -0.00430507 Jy
! Total flux subtracted in 200 components = -0.00430507 Jy
! Clean residual min=-0.017810 max=0.016983 Jy/beam
! Clean residual mean=-0.000011 rms=0.004289 Jy/beam
! Combined flux in latest and established models = 0.929178 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 144 components and 0.929178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070657Jy  sigma=0.877554
! Fit after  self-cal, rms=0.070003Jy  sigma=0.868029
wmodel J2329-4730_X_map.mod
! Writing 144 model components to file: J2329-4730_X_map.mod
wobs   J2329-4730_X_uvs.fits
! Writing UV FITS file: J2329-4730_X_uvs.fits
wwins  J2329-4730_X_map.win
! wwins: Wrote 2 windows to J2329-4730_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010346 Jy
! Component: 100  -  total flux cleaned = 0.00335254 Jy
! Component: 150  -  total flux cleaned = 0.00494809 Jy
! Component: 200  -  total flux cleaned = 0.00660693 Jy
! Component: 250  -  total flux cleaned = 0.00813025 Jy
! Component: 300  -  total flux cleaned = 0.0088406 Jy
! Component: 350  -  total flux cleaned = 0.00868768 Jy
! Component: 400  -  total flux cleaned = 0.0083714 Jy
! Component: 450  -  total flux cleaned = 0.00790351 Jy
! Component: 500  -  total flux cleaned = 0.0073145 Jy
! Component: 550  -  total flux cleaned = 0.00675831 Jy
! Component: 600  -  total flux cleaned = 0.00675937 Jy
! Component: 650  -  total flux cleaned = 0.00636716 Jy
! Component: 700  -  total flux cleaned = 0.00623879 Jy
! Component: 750  -  total flux cleaned = 0.0058733 Jy
! Component: 800  -  total flux cleaned = 0.00552184 Jy
! Component: 850  -  total flux cleaned = 0.00552283 Jy
! Component: 900  -  total flux cleaned = 0.00508097 Jy
! Component: 950  -  total flux cleaned = 0.00486851 Jy
! Component: 1000  -  total flux cleaned = 0.00455678 Jy
! Component: 1050  -  total flux cleaned = 0.00405336 Jy
! Component: 1100  -  total flux cleaned = 0.00385854 Jy
! Component: 1150  -  total flux cleaned = 0.00347772 Jy
! Component: 1200  -  total flux cleaned = 0.00301272 Jy
! Component: 1250  -  total flux cleaned = 0.00256123 Jy
! Component: 1300  -  total flux cleaned = 0.00220945 Jy
! Component: 1350  -  total flux cleaned = 0.00195036 Jy
! Component: 1400  -  total flux cleaned = 0.00153282 Jy
! Component: 1450  -  total flux cleaned = 0.00177693 Jy
! Component: 1500  -  total flux cleaned = 0.00177331 Jy
! Component: 1550  -  total flux cleaned = 0.0017708 Jy
! Component: 1600  -  total flux cleaned = 0.00177122 Jy
! Component: 1650  -  total flux cleaned = 0.00184791 Jy
! Component: 1700  -  total flux cleaned = 0.0020664 Jy
! Component: 1750  -  total flux cleaned = 0.00220739 Jy
! Component: 1800  -  total flux cleaned = 0.00234688 Jy
! Component: 1850  -  total flux cleaned = 0.00248479 Jy
! Component: 1900  -  total flux cleaned = 0.00282145 Jy
! Component: 1950  -  total flux cleaned = 0.0030855 Jy
! Component: 2000  -  total flux cleaned = 0.0033444 Jy
! Component: 2050  -  total flux cleaned = 0.00372615 Jy
! Component: 2100  -  total flux cleaned = 0.00378955 Jy
! Component: 2150  -  total flux cleaned = 0.00409915 Jy
! Component: 2200  -  total flux cleaned = 0.00440321 Jy
! Component: 2250  -  total flux cleaned = 0.00464169 Jy
! Component: 2300  -  total flux cleaned = 0.00487805 Jy
! Component: 2350  -  total flux cleaned = 0.00505227 Jy
! Component: 2400  -  total flux cleaned = 0.00516739 Jy
! Component: 2450  -  total flux cleaned = 0.00556526 Jy
! Component: 2500  -  total flux cleaned = 0.00579001 Jy
! Component: 2550  -  total flux cleaned = 0.00628741 Jy
! Component: 2600  -  total flux cleaned = 0.00650603 Jy
! Component: 2650  -  total flux cleaned = 0.00677591 Jy
! Component: 2700  -  total flux cleaned = 0.00704271 Jy
! Component: 2750  -  total flux cleaned = 0.00735833 Jy
! Component: 2800  -  total flux cleaned = 0.00761678 Jy
! Component: 2850  -  total flux cleaned = 0.0079253 Jy
! Component: 2900  -  total flux cleaned = 0.00817881 Jy
! Component: 2950  -  total flux cleaned = 0.00863049 Jy
! Component: 3000  -  total flux cleaned = 0.00887861 Jy
! Component: 3050  -  total flux cleaned = 0.00922282 Jy
! Component: 3100  -  total flux cleaned = 0.00951454 Jy
! Component: 3150  -  total flux cleaned = 0.00999617 Jy
! Component: 3200  -  total flux cleaned = 0.010283 Jy
! Component: 3250  -  total flux cleaned = 0.0106139 Jy
! Component: 3300  -  total flux cleaned = 0.0108479 Jy
! Component: 3350  -  total flux cleaned = 0.0109414 Jy
! Component: 3400  -  total flux cleaned = 0.0113103 Jy
! Component: 3450  -  total flux cleaned = 0.0114934 Jy
! Component: 3500  -  total flux cleaned = 0.0117661 Jy
! Component: 3550  -  total flux cleaned = 0.0119464 Jy
! Component: 3600  -  total flux cleaned = 0.0121703 Jy
! Component: 3650  -  total flux cleaned = 0.0123925 Jy
! Component: 3700  -  total flux cleaned = 0.0127892 Jy
! Component: 3750  -  total flux cleaned = 0.0130949 Jy
! Component: 3800  -  total flux cleaned = 0.0132682 Jy
! Component: 3850  -  total flux cleaned = 0.0133541 Jy
! Component: 3900  -  total flux cleaned = 0.0136106 Jy
! Component: 3950  -  total flux cleaned = 0.0136104 Jy
! Component: 4000  -  total flux cleaned = 0.0139488 Jy
! Component: 4050  -  total flux cleaned = 0.0140749 Jy
! Total flux subtracted in 4096 components = 0.0142004 Jy
! Clean residual min=-0.002284 max=0.002454 Jy/beam
! Clean residual mean=-0.000010 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.943378 Jy
keep
! Adding 258 model components to the UV plane model.
! The established model now contains 402 components and 0.943379 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv120_uvs/J2329-4730_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9595 x 6.792 at -6.565 degrees (North through East)
! Clean map  min=-0.0079953  max=0.49756 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv120_uvs/J2329-4730_X_map.fits
wmodel /scr/pima/rv120_uvs/J2329-4730_X_map.mod
! Writing 402 model components to file: /scr/pima/rv120_uvs/J2329-4730_X_map.mod
wobs   /scr/pima/rv120_uvs/J2329-4730_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv120_uvs/J2329-4730_X_uvs.fits
wwins  /scr/pima/rv120_uvs/J2329-4730_X_map.win
! wwins: Wrote 3 windows to /scr/pima/rv120_uvs/J2329-4730_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.497562 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000865014 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.521551 0.521551 1.0431 2.08621 4.17241 8.34482 16.6896 33.3793 66.7586
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.497 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  575.206 
quit
! Quitting program
! Log file /scr/pima/rv120_uvs/J2329-4730_X_dfm.log closed on Fri Dec 22 22:45:26 2017