! Started logfile: /scr/pima/rv120_uvs/J2329-4730_S_dfm.log on Fri Dec 22 22:36:46 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv120_uvs/J2329-4730_S_uva.fits
! Reading UV FITS file: /scr/pima/rv120_uvs/J2329-4730_S_uva.fits
! AN table 1: 7 integrations on 6 of 6 possible baselines.
! AN table 2: 13 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.44127 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2329-4730
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 556 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2329-4730_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 47 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 47 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 47 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.625180Jy  sigma=18.004729
! Fit after  self-cal, rms=0.715844Jy  sigma=8.514722
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.345 mas, bmaj=16.38 mas, bpa=-9.355 degrees
! Estimated noise=3.75956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.563561 Jy
! Component: 100  -  total flux cleaned = 0.867485 Jy
! Total flux subtracted in 100 components = 0.867485 Jy
! Clean residual min=-0.112530 max=0.236795 Jy/beam
! Clean residual mean=0.000417 rms=0.033804 Jy/beam
! Combined flux in latest and established models = 0.867485 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.867485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.648867Jy  sigma=6.618036
! Fit after  self-cal, rms=0.638861Jy  sigma=6.545568
! Inverting map 
! Added new window around map position (7.5, 5.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.236073 Jy
! Component: 100  -  total flux cleaned = 0.392842 Jy
! Total flux subtracted in 100 components = 0.392842 Jy
! Clean residual min=-0.080987 max=0.117550 Jy/beam
! Clean residual mean=0.000418 rms=0.020112 Jy/beam
! Combined flux in latest and established models = 1.26033 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 1.26033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.415591Jy  sigma=4.211988
! Fit after  self-cal, rms=0.410386Jy  sigma=4.145103
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.878 mas, bmaj=20 mas, bpa=-9.113 degrees
! Estimated noise=3.24594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221125 Jy
! Component: 100  -  total flux cleaned = 0.337698 Jy
! Component: 150  -  total flux cleaned = 0.407368 Jy
! Component: 200  -  total flux cleaned = 0.451441 Jy
! Total flux subtracted in 200 components = 0.451441 Jy
! Clean residual min=-0.060266 max=0.054789 Jy/beam
! Clean residual mean=0.001414 rms=0.014524 Jy/beam
! Combined flux in latest and established models = 1.71177 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 91 components and 1.71177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.240996Jy  sigma=2.356524
! Fit after  self-cal, rms=0.238887Jy  sigma=2.329245
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.878 x 20 at -9.113 degrees (North through East)
! Clean map  min=-0.058673  max=0.79347 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        0.97     PT        0.96     SC        1.04     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KK        1.00     KP        0.96     LA        0.97     
!   MK        0.93     OV        1.05     PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     KP        0.99     PT        0.95     SC        1.11     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     KK        0.95     KP        0.97     LA        0.98     
!   MK        0.92     OV        1.06     PT        0.94     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    PT        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     KK        1.00     KP        1.00*    LA        2.35     
!   MK        0.62     OV        1.09     PT        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        1.02     PT        1.02     SC        1.22     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.03     KK        1.03     KP        0.99     LA        0.98     
!   MK        0.97     OV        1.06     PT        0.96     
! 
! 
! Fit before self-cal, rms=0.238887Jy  sigma=2.329245
! Fit after  self-cal, rms=0.114101Jy  sigma=1.265350
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.722 mas, bmaj=21.91 mas, bpa=-10.71 degrees
! Estimated noise=3.32763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124454 Jy
! Component: 100  -  total flux cleaned = 0.0124561 Jy
! Component: 150  -  total flux cleaned = 0.0113846 Jy
! Component: 200  -  total flux cleaned = 0.010969 Jy
! Total flux subtracted in 200 components = 0.010969 Jy
! Clean residual min=-0.030065 max=0.031043 Jy/beam
! Clean residual mean=-0.000164 rms=0.006623 Jy/beam
! Combined flux in latest and established models = 1.72274 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 1.72274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108417Jy  sigma=1.176309
! Fit after  self-cal, rms=0.108245Jy  sigma=1.167333
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108245Jy  sigma=1.167333
! Fit after  self-cal, rms=0.106914Jy  sigma=1.156785
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.714 mas, bmaj=21.74 mas, bpa=-10.7 degrees
! Estimated noise=3.30455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112331 Jy
! Component: 100  -  total flux cleaned = 0.0107829 Jy
! Component: 150  -  total flux cleaned = 0.0103715 Jy
! Component: 200  -  total flux cleaned = 0.00969247 Jy
! Total flux subtracted in 200 components = 0.00969247 Jy
! Clean residual min=-0.027543 max=0.029145 Jy/beam
! Clean residual mean=-0.000169 rms=0.006059 Jy/beam
! Combined flux in latest and established models = 1.73243 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 118 components and 1.73243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103709Jy  sigma=1.105979
! Fit after  self-cal, rms=0.103239Jy  sigma=1.101825
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334039 Jy
! Component: 100  -  total flux cleaned = 0.00274012 Jy
! Component: 150  -  total flux cleaned = 0.00246189 Jy
! Component: 200  -  total flux cleaned = 0.00247492 Jy
! Total flux subtracted in 200 components = 0.00247492 Jy
! Clean residual min=-0.027193 max=0.026573 Jy/beam
! Clean residual mean=-0.000162 rms=0.005837 Jy/beam
! Combined flux in latest and established models = 1.7349 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 1.7349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101712Jy  sigma=1.075877
! Fit after  self-cal, rms=0.101454Jy  sigma=1.073871
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101454Jy  sigma=1.073871
! Fit after  self-cal, rms=0.093026Jy  sigma=1.002936
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.715 mas, bmaj=21.71 mas, bpa=-10.6 degrees
! Estimated noise=3.29889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00506718 Jy
! Component: 100  -  total flux cleaned = 0.00562054 Jy
! Component: 150  -  total flux cleaned = 0.00612965 Jy
! Component: 200  -  total flux cleaned = 0.00590309 Jy
! Total flux subtracted in 200 components = 0.00590309 Jy
! Clean residual min=-0.020616 max=0.023919 Jy/beam
! Clean residual mean=-0.000126 rms=0.005200 Jy/beam
! Combined flux in latest and established models = 1.74081 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 139 components and 1.74081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091453Jy  sigma=0.981912
! Fit after  self-cal, rms=0.091340Jy  sigma=0.980743
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00482924 Jy
! Component: 100  -  total flux cleaned = 0.00192093 Jy
! Component: 150  -  total flux cleaned = -0.000717074 Jy
! Component: 200  -  total flux cleaned = -0.00135418 Jy
! Total flux subtracted in 200 components = -0.00135418 Jy
! Clean residual min=-0.014442 max=0.016821 Jy/beam
! Clean residual mean=-0.000115 rms=0.004179 Jy/beam
! Combined flux in latest and established models = 1.73945 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 172 components and 1.73945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083629Jy  sigma=0.876491
! Fit after  self-cal, rms=0.083067Jy  sigma=0.870475
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083067Jy  sigma=0.870475
! Fit after  self-cal, rms=0.081463Jy  sigma=0.856471
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.915 mas, bmaj=39.15 mas, bpa=-3.204 degrees
! Estimated noise=5.375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000834831 Jy
! Component: 100  -  total flux cleaned = 0.0016377 Jy
! Component: 150  -  total flux cleaned = 0.00213583 Jy
! Component: 200  -  total flux cleaned = 0.00163033 Jy
! Total flux subtracted in 200 components = 0.00163033 Jy
! Clean residual min=-0.016892 max=0.016052 Jy/beam
! Clean residual mean=-0.000289 rms=0.005110 Jy/beam
! Combined flux in latest and established models = 1.74108 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 211 components and 1.74108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080128Jy  sigma=0.849184
! Fit after  self-cal, rms=0.079862Jy  sigma=0.846043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00195218 Jy
! Component: 100  -  total flux cleaned = -0.00250818 Jy
! Component: 150  -  total flux cleaned = -0.00314834 Jy
! Component: 200  -  total flux cleaned = -0.00362307 Jy
! Total flux subtracted in 200 components = -0.00362307 Jy
! Clean residual min=-0.015990 max=0.014997 Jy/beam
! Clean residual mean=-0.000313 rms=0.005023 Jy/beam
! Combined flux in latest and established models = 1.73746 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 234 components and 1.73746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079610Jy  sigma=0.845891
! Fit after  self-cal, rms=0.079609Jy  sigma=0.845578
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.718 mas, bmaj=21.65 mas, bpa=-10.6 degrees
! Estimated noise=3.30575 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.718 x 21.65 at -10.6 degrees (North through East)
! Clean map  min=-0.017958  max=0.75077 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079609Jy  sigma=0.845578
! Fit after  self-cal, rms=0.075562Jy  sigma=0.804165
! Inverting map and beam 
! Estimated beam: bmin=2.719 mas, bmaj=21.68 mas, bpa=-10.62 degrees
! Estimated noise=3.31437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499667 Jy
! Component: 100  -  total flux cleaned = 0.00806601 Jy
! Component: 150  -  total flux cleaned = 0.00827651 Jy
! Component: 200  -  total flux cleaned = 0.00827931 Jy
! Total flux subtracted in 200 components = 0.00827931 Jy
! Clean residual min=-0.011591 max=0.014683 Jy/beam
! Clean residual mean=-0.000117 rms=0.003452 Jy/beam
! Combined flux in latest and established models = 1.74574 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 261 components and 1.74574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074285Jy  sigma=0.778499
! Fit after  self-cal, rms=0.074130Jy  sigma=0.777204
! Inverting map 
! Added new window around map position (25, -21.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101009 Jy
! Component: 100  -  total flux cleaned = 0.013985 Jy
! Component: 150  -  total flux cleaned = 0.0167014 Jy
! Component: 200  -  total flux cleaned = 0.0186803 Jy
! Total flux subtracted in 200 components = 0.0186803 Jy
! Clean residual min=-0.010666 max=0.011937 Jy/beam
! Clean residual mean=-0.000052 rms=0.002978 Jy/beam
! Combined flux in latest and established models = 1.76442 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 278 components and 1.76442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071495Jy  sigma=0.737373
! Fit after  self-cal, rms=0.071197Jy  sigma=0.735844
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071197Jy  sigma=0.735844
! Fit after  self-cal, rms=0.071007Jy  sigma=0.731477
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.322 mas, bmaj=17.69 mas, bpa=-10.61 degrees
! Estimated noise=3.67438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.532189 Jy
! Component: 100  -  total flux cleaned = 0.858294 Jy
! Component: 150  -  total flux cleaned = 1.08222 Jy
! Component: 200  -  total flux cleaned = 1.24152 Jy
! Total flux subtracted in 200 components = 1.24152 Jy
! Clean residual min=-0.064440 max=0.091415 Jy/beam
! Clean residual mean=-0.000783 rms=0.018138 Jy/beam
! Combined flux in latest and established models = 1.24152 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 1.24152 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.718 mas, bmaj=21.63 mas, bpa=-10.61 degrees
! Estimated noise=3.30921 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.197202 Jy
! Component: 100  -  total flux cleaned = 0.306708 Jy
! Component: 150  -  total flux cleaned = 0.379713 Jy
! Component: 200  -  total flux cleaned = 0.430471 Jy
! Total flux subtracted in 200 components = 0.430471 Jy
! Clean residual min=-0.029151 max=0.032852 Jy/beam
! Clean residual mean=-0.000323 rms=0.007558 Jy/beam
! Combined flux in latest and established models = 1.67199 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 85 components and 1.67199 Jy
! Inverting map 
! Added new window around map position (-1, 27.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273212 Jy
! Component: 100  -  total flux cleaned = 0.0413935 Jy
! Component: 150  -  total flux cleaned = 0.0511939 Jy
! Component: 200  -  total flux cleaned = 0.0598056 Jy
! Total flux subtracted in 200 components = 0.0598056 Jy
! Clean residual min=-0.014091 max=0.011935 Jy/beam
! Clean residual mean=-0.000171 rms=0.003940 Jy/beam
! Combined flux in latest and established models = 1.7318 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 124 components and 1.7318 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.898 mas, bmaj=39.04 mas, bpa=-3.201 degrees
! Estimated noise=5.38312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011766 Jy
! Component: 100  -  total flux cleaned = 0.023186 Jy
! Component: 150  -  total flux cleaned = 0.0326697 Jy
! Component: 200  -  total flux cleaned = 0.0398469 Jy
! Total flux subtracted in 200 components = 0.0398469 Jy
! Clean residual min=-0.012036 max=0.009238 Jy/beam
! Clean residual mean=-0.000088 rms=0.003627 Jy/beam
! Combined flux in latest and established models = 1.77164 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0057635 Jy
! Component: 100  -  total flux cleaned = 0.0103931 Jy
! Component: 150  -  total flux cleaned = 0.0139481 Jy
! Component: 200  -  total flux cleaned = 0.0168538 Jy
! Total flux subtracted in 200 components = 0.0168538 Jy
! Clean residual min=-0.010373 max=0.009089 Jy/beam
! Clean residual mean=0.000053 rms=0.003172 Jy/beam
! Combined flux in latest and established models = 1.7885 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 202 components and 1.7885 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.718 mas, bmaj=21.63 mas, bpa=-10.61 degrees
! Estimated noise=3.30921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138217 Jy
! Component: 100  -  total flux cleaned = 0.000768443 Jy
! Component: 150  -  total flux cleaned = 0.000307758 Jy
! Component: 200  -  total flux cleaned = 0.00033329 Jy
! Total flux subtracted in 200 components = 0.00033329 Jy
! Clean residual min=-0.008751 max=0.010041 Jy/beam
! Clean residual mean=0.000025 rms=0.002698 Jy/beam
! Combined flux in latest and established models = 1.78883 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 241 components and 1.78883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069124Jy  sigma=0.723151
! Fit after  self-cal, rms=0.068675Jy  sigma=0.714404
wmodel J2329-4730_S_map.mod
! Writing 241 model components to file: J2329-4730_S_map.mod
wobs   J2329-4730_S_uvs.fits
! Writing UV FITS file: J2329-4730_S_uvs.fits
wwins  J2329-4730_S_map.win
! wwins: Wrote 5 windows to J2329-4730_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00299946 Jy
! Component: 100  -  total flux cleaned = 0.00363071 Jy
! Component: 150  -  total flux cleaned = 0.00333137 Jy
! Component: 200  -  total flux cleaned = 0.00319283 Jy
! Component: 250  -  total flux cleaned = 0.00306202 Jy
! Component: 300  -  total flux cleaned = 0.00292864 Jy
! Component: 350  -  total flux cleaned = 0.00255414 Jy
! Component: 400  -  total flux cleaned = 0.00219464 Jy
! Component: 450  -  total flux cleaned = 0.00196222 Jy
! Component: 500  -  total flux cleaned = 0.00129365 Jy
! Component: 550  -  total flux cleaned = 0.00108109 Jy
! Component: 600  -  total flux cleaned = 0.00108267 Jy
! Component: 650  -  total flux cleaned = 0.0010815 Jy
! Component: 700  -  total flux cleaned = 0.00088533 Jy
! Component: 750  -  total flux cleaned = 0.000791684 Jy
! Component: 800  -  total flux cleaned = 0.000789335 Jy
! Component: 850  -  total flux cleaned = 0.00033482 Jy
! Component: 900  -  total flux cleaned = -1.71329e-05 Jy
! Component: 950  -  total flux cleaned = -0.000187035 Jy
! Component: 1000  -  total flux cleaned = -0.000519775 Jy
! Component: 1050  -  total flux cleaned = -0.000521266 Jy
! Component: 1100  -  total flux cleaned = -0.00083817 Jy
! Component: 1150  -  total flux cleaned = -0.000759065 Jy
! Component: 1200  -  total flux cleaned = -0.000759202 Jy
! Component: 1250  -  total flux cleaned = -0.000907304 Jy
! Component: 1300  -  total flux cleaned = -0.000834685 Jy
! Component: 1350  -  total flux cleaned = -0.000977243 Jy
! Component: 1400  -  total flux cleaned = -0.00104661 Jy
! Component: 1450  -  total flux cleaned = -0.0011823 Jy
! Component: 1500  -  total flux cleaned = -0.00131554 Jy
! Component: 1550  -  total flux cleaned = -0.00131436 Jy
! Component: 1600  -  total flux cleaned = -0.00144413 Jy
! Component: 1650  -  total flux cleaned = -0.00157173 Jy
! Component: 1700  -  total flux cleaned = -0.00182117 Jy
! Component: 1750  -  total flux cleaned = -0.00194265 Jy
! Component: 1800  -  total flux cleaned = -0.00212162 Jy
! Component: 1850  -  total flux cleaned = -0.00235855 Jy
! Component: 1900  -  total flux cleaned = -0.00270941 Jy
! Component: 1950  -  total flux cleaned = -0.00293967 Jy
! Component: 2000  -  total flux cleaned = -0.00328128 Jy
! Component: 2050  -  total flux cleaned = -0.00350591 Jy
! Component: 2100  -  total flux cleaned = -0.00372788 Jy
! Component: 2150  -  total flux cleaned = -0.00416429 Jy
! Component: 2200  -  total flux cleaned = -0.00427166 Jy
! Component: 2250  -  total flux cleaned = -0.00464375 Jy
! Component: 2300  -  total flux cleaned = -0.0048535 Jy
! Component: 2350  -  total flux cleaned = -0.00537205 Jy
! Component: 2400  -  total flux cleaned = -0.00567937 Jy
! Component: 2450  -  total flux cleaned = -0.00598406 Jy
! Component: 2500  -  total flux cleaned = -0.00628527 Jy
! Component: 2550  -  total flux cleaned = -0.00673217 Jy
! Component: 2600  -  total flux cleaned = -0.00678109 Jy
! Component: 2650  -  total flux cleaned = -0.00702496 Jy
! Component: 2700  -  total flux cleaned = -0.00697649 Jy
! Component: 2750  -  total flux cleaned = -0.00712099 Jy
! Component: 2800  -  total flux cleaned = -0.00721684 Jy
! Component: 2850  -  total flux cleaned = -0.0073589 Jy
! Component: 2900  -  total flux cleaned = -0.00749965 Jy
! Component: 2950  -  total flux cleaned = -0.00768635 Jy
! Component: 3000  -  total flux cleaned = -0.00759365 Jy
! Component: 3050  -  total flux cleaned = -0.00750185 Jy
! Component: 3100  -  total flux cleaned = -0.00759381 Jy
! Component: 3150  -  total flux cleaned = -0.00754809 Jy
! Component: 3200  -  total flux cleaned = -0.00754814 Jy
! Component: 3250  -  total flux cleaned = -0.0074586 Jy
! Component: 3300  -  total flux cleaned = -0.00754797 Jy
! Component: 3350  -  total flux cleaned = -0.00754798 Jy
! Component: 3400  -  total flux cleaned = -0.00750367 Jy
! Component: 3450  -  total flux cleaned = -0.0073721 Jy
! Component: 3500  -  total flux cleaned = -0.00745982 Jy
! Component: 3550  -  total flux cleaned = -0.00741644 Jy
! Component: 3600  -  total flux cleaned = -0.00737297 Jy
! Component: 3650  -  total flux cleaned = -0.00724368 Jy
! Component: 3700  -  total flux cleaned = -0.00728667 Jy
! Component: 3750  -  total flux cleaned = -0.00724377 Jy
! Component: 3800  -  total flux cleaned = -0.00715873 Jy
! Component: 3850  -  total flux cleaned = -0.00698893 Jy
! Component: 3900  -  total flux cleaned = -0.00707353 Jy
! Component: 3950  -  total flux cleaned = -0.00698896 Jy
! Component: 4000  -  total flux cleaned = -0.00682051 Jy
! Component: 4050  -  total flux cleaned = -0.00690449 Jy
! Total flux subtracted in 4096 components = -0.00677865 Jy
! Clean residual min=-0.002460 max=0.002630 Jy/beam
! Clean residual mean=-0.000018 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 1.78205 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 522 components and 1.78205 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv120_uvs/J2329-4730_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.718 x 21.63 at -10.61 degrees (North through East)
! Clean map  min=-0.013255  max=0.74811 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv120_uvs/J2329-4730_S_map.fits
wmodel /scr/pima/rv120_uvs/J2329-4730_S_map.mod
! Writing 522 model components to file: /scr/pima/rv120_uvs/J2329-4730_S_map.mod
wobs   /scr/pima/rv120_uvs/J2329-4730_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv120_uvs/J2329-4730_S_uvs.fits
wwins  /scr/pima/rv120_uvs/J2329-4730_S_map.win
! wwins: Wrote 6 windows to /scr/pima/rv120_uvs/J2329-4730_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.748113 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000792009 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.317602 0.317602 0.635205 1.27041 2.54082 5.08164 10.1633 20.3266 40.6531 81.3062
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.748 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  944.577 
quit
! Quitting program
! Log file /scr/pima/rv120_uvs/J2329-4730_S_dfm.log closed on Fri Dec 22 22:36:51 2017