! Started logfile: /scr/pima/rv120_uvs/J2211-1328_S_dfm.log on Fri Dec 22 22:36:13 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv120_uvs/J2211-1328_S_uva.fits
! Reading UV FITS file: /scr/pima/rv120_uvs/J2211-1328_S_uva.fits
! AN table 1: 59 integrations on 36 of 36 possible baselines.
! AN table 2: 35 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.578608 visibilities/baseline/integration-bin.
! Found source: J2211-1328
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7184 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2211-1328_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 185 telescope corrections were flagged in sub-array 1.
!  A total of 73 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 185 telescope corrections were flagged in sub-array 1.
!  A total of 73 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 301 telescope corrections were flagged in sub-array 1.
!  A total of 125 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 185 telescope corrections were flagged in sub-array 1.
!  A total of 73 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.022507Jy  sigma=19.964061
! Fit after  self-cal, rms=0.786201Jy  sigma=15.328343
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.594 mas, bmaj=9.401 mas, bpa=-0.07513 degrees
! Estimated noise=0.767145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.164525 Jy
! Component: 100  -  total flux cleaned = 0.202068 Jy
! Total flux subtracted in 100 components = 0.202068 Jy
! Clean residual min=-0.007923 max=0.013828 Jy/beam
! Clean residual mean=-0.000019 rms=0.001967 Jy/beam
! Combined flux in latest and established models = 0.202068 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.202068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065319Jy  sigma=1.219015
! Fit after  self-cal, rms=0.065300Jy  sigma=1.218525
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149418 Jy
! Component: 100  -  total flux cleaned = 0.0230911 Jy
! Total flux subtracted in 100 components = 0.0230911 Jy
! Clean residual min=-0.006124 max=0.010123 Jy/beam
! Clean residual mean=-0.000015 rms=0.001594 Jy/beam
! Combined flux in latest and established models = 0.225159 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 33 components and 0.225159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061099Jy  sigma=1.130536
! Fit after  self-cal, rms=0.061069Jy  sigma=1.129613
! Inverting map 
! Added new window around map position (2.5, -18).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911057 Jy
! Component: 100  -  total flux cleaned = 0.0142623 Jy
! Total flux subtracted in 100 components = 0.0142623 Jy
! Clean residual min=-0.005541 max=0.006431 Jy/beam
! Clean residual mean=-0.000011 rms=0.001427 Jy/beam
! Combined flux in latest and established models = 0.239422 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 54 components and 0.239422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059073Jy  sigma=1.092039
! Fit after  self-cal, rms=0.058959Jy  sigma=1.089438
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.359 mas, bmaj=10.6 mas, bpa=-0.4581 degrees
! Estimated noise=0.480711 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00652727 Jy
! Component: 100  -  total flux cleaned = 0.00980171 Jy
! Component: 150  -  total flux cleaned = 0.0119206 Jy
! Component: 200  -  total flux cleaned = 0.0126584 Jy
! Total flux subtracted in 200 components = 0.0126584 Jy
! Clean residual min=-0.004076 max=0.004804 Jy/beam
! Clean residual mean=-0.000018 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 0.25208 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 75 components and 0.25208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058183Jy  sigma=1.075435
! Fit after  self-cal, rms=0.058107Jy  sigma=1.073635
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.359 x 10.6 at -0.4581 degrees (North through East)
! Clean map  min=-0.0040105  max=0.21426 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.98     KP        0.99     
!   LA        0.98     NL        1.00     OV        1.01     PT        0.97     
!   SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.96     KP        0.99     LA        1.00     
!   MK        1.02     NL        1.23     OV        1.01     PT        0.98     
! 
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.02     KP        0.99     
!   LA        0.97     NL        0.98     OV        0.97     PT        1.00     
!   SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.96     KP        0.99     LA        1.01     
!   MK        1.02     NL        0.99     OV        0.99     PT        0.98     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.03     KP        1.00*    
!   LA        0.96     NL        1.00*    OV        1.00     PT        1.02     
!   SC        0.64     
! 
!  A total of 54 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.91     KP        1.00*    LA        1.99     
!   MK        0.74     NL        1.00*    OV        0.99     PT        1.01     
! 
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.07     KP        1.00     
!   LA        1.00     NL        0.99     OV        0.99     PT        0.99     
!   SC        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.04     KP        1.01     LA        0.99     
!   MK        1.01     NL        0.97     OV        0.93     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.058107Jy  sigma=1.073635
! Fit after  self-cal, rms=0.051535Jy  sigma=0.951908
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.37 mas, bmaj=10.55 mas, bpa=-0.8941 degrees
! Estimated noise=0.489991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253355 Jy
! Component: 100  -  total flux cleaned = 0.00360246 Jy
! Component: 150  -  total flux cleaned = 0.00414847 Jy
! Component: 200  -  total flux cleaned = 0.00436501 Jy
! Total flux subtracted in 200 components = 0.00436501 Jy
! Clean residual min=-0.002180 max=0.002369 Jy/beam
! Clean residual mean=-0.000002 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.256445 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 90 components and 0.256445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051404Jy  sigma=0.948942
! Fit after  self-cal, rms=0.051605Jy  sigma=0.947643
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051605Jy  sigma=0.947643
! Fit after  self-cal, rms=0.051566Jy  sigma=0.943237
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.368 mas, bmaj=10.55 mas, bpa=-0.929 degrees
! Estimated noise=0.490689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113748 Jy
! Component: 100  -  total flux cleaned = 0.0017474 Jy
! Component: 150  -  total flux cleaned = 0.00201402 Jy
! Component: 200  -  total flux cleaned = 0.00204973 Jy
! Total flux subtracted in 200 components = 0.00204973 Jy
! Clean residual min=-0.001942 max=0.002292 Jy/beam
! Clean residual mean=0.000002 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.258495 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.258495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051538Jy  sigma=0.942527
! Fit after  self-cal, rms=0.051544Jy  sigma=0.942440
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -39).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215947 Jy
! Component: 100  -  total flux cleaned = 0.00291985 Jy
! Component: 150  -  total flux cleaned = 0.00298836 Jy
! Component: 200  -  total flux cleaned = 0.0031049 Jy
! Total flux subtracted in 200 components = 0.0031049 Jy
! Clean residual min=-0.002108 max=0.001774 Jy/beam
! Clean residual mean=0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.2616 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 138 components and 0.2616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051445Jy  sigma=0.940499
! Fit after  self-cal, rms=0.051441Jy  sigma=0.940414
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051441Jy  sigma=0.940414
! Fit after  self-cal, rms=0.051318Jy  sigma=0.937479
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.37 mas, bmaj=10.56 mas, bpa=-0.9993 degrees
! Estimated noise=0.490887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000541433 Jy
! Component: 100  -  total flux cleaned = 0.000616275 Jy
! Component: 150  -  total flux cleaned = 0.00072736 Jy
! Component: 200  -  total flux cleaned = 0.000864265 Jy
! Total flux subtracted in 200 components = 0.000864265 Jy
! Clean residual min=-0.001973 max=0.001878 Jy/beam
! Clean residual mean=0.000006 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.262464 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 169 components and 0.262464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051295Jy  sigma=0.937039
! Fit after  self-cal, rms=0.051298Jy  sigma=0.937004
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011711 Jy
! Component: 100  -  total flux cleaned = 0.000201484 Jy
! Component: 150  -  total flux cleaned = 0.000232531 Jy
! Component: 200  -  total flux cleaned = 0.000232931 Jy
! Total flux subtracted in 200 components = 0.000232931 Jy
! Clean residual min=-0.001988 max=0.001884 Jy/beam
! Clean residual mean=0.000005 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.262697 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 187 components and 0.262697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051290Jy  sigma=0.936821
! Fit after  self-cal, rms=0.051288Jy  sigma=0.936816
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051288Jy  sigma=0.936816
! Fit after  self-cal, rms=0.051318Jy  sigma=0.936773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.031 mas, bmaj=13.6 mas, bpa=-1.151 degrees
! Estimated noise=0.586633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.28743e-05 Jy
! Component: 100  -  total flux cleaned = 8.06173e-05 Jy
! Component: 150  -  total flux cleaned = 6.46101e-05 Jy
! Component: 200  -  total flux cleaned = 3.71875e-05 Jy
! Total flux subtracted in 200 components = 3.71875e-05 Jy
! Clean residual min=-0.001655 max=0.001837 Jy/beam
! Clean residual mean=0.000010 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.262734 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 200 components and 0.262734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051317Jy  sigma=0.936683
! Fit after  self-cal, rms=0.051318Jy  sigma=0.936667
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.21955e-05 Jy
! Component: 100  -  total flux cleaned = -2.09568e-06 Jy
! Component: 150  -  total flux cleaned = -2.35807e-05 Jy
! Component: 200  -  total flux cleaned = -3.28941e-05 Jy
! Total flux subtracted in 200 components = -3.28941e-05 Jy
! Clean residual min=-0.001716 max=0.001817 Jy/beam
! Clean residual mean=0.000010 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.262701 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 215 components and 0.262701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051318Jy  sigma=0.936632
! Fit after  self-cal, rms=0.051317Jy  sigma=0.936625
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.369 mas, bmaj=10.55 mas, bpa=-0.9941 degrees
! Estimated noise=0.491009 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.369 x 10.55 at -0.9941 degrees (North through East)
! Clean map  min=-0.0019902  max=0.21385 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.623 mas, bmaj=9.367 mas, bpa=-0.7066 degrees
! Estimated noise=0.76368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.164284 Jy
! Component: 100  -  total flux cleaned = 0.202166 Jy
! Component: 150  -  total flux cleaned = 0.219079 Jy
! Component: 200  -  total flux cleaned = 0.229508 Jy
! Total flux subtracted in 200 components = 0.229508 Jy
! Clean residual min=-0.005002 max=0.005694 Jy/beam
! Clean residual mean=-0.000007 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.229508 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.229508 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.369 mas, bmaj=10.55 mas, bpa=-0.9941 degrees
! Estimated noise=0.491009 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100271 Jy
! Component: 100  -  total flux cleaned = 0.0164608 Jy
! Component: 150  -  total flux cleaned = 0.0208533 Jy
! Component: 200  -  total flux cleaned = 0.0240745 Jy
! Total flux subtracted in 200 components = 0.0240745 Jy
! Clean residual min=-0.002096 max=0.002069 Jy/beam
! Clean residual mean=0.000011 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.253582 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 87 components and 0.253582 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.031 mas, bmaj=13.6 mas, bpa=-1.151 degrees
! Estimated noise=0.586633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00330728 Jy
! Component: 100  -  total flux cleaned = 0.00554474 Jy
! Component: 150  -  total flux cleaned = 0.00683709 Jy
! Component: 200  -  total flux cleaned = 0.00742345 Jy
! Total flux subtracted in 200 components = 0.00742345 Jy
! Clean residual min=-0.001841 max=0.001723 Jy/beam
! Clean residual mean=0.000013 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.261006 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505825 Jy
! Component: 100  -  total flux cleaned = 0.000878476 Jy
! Component: 150  -  total flux cleaned = 0.00113329 Jy
! Component: 200  -  total flux cleaned = 0.00134408 Jy
! Total flux subtracted in 200 components = 0.00134408 Jy
! Clean residual min=-0.001810 max=0.001745 Jy/beam
! Clean residual mean=0.000011 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.26235 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 169 components and 0.26235 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.369 mas, bmaj=10.55 mas, bpa=-0.9941 degrees
! Estimated noise=0.491009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019913 Jy
! Component: 100  -  total flux cleaned = 0.000304679 Jy
! Component: 150  -  total flux cleaned = 0.00039487 Jy
! Component: 200  -  total flux cleaned = 0.000474774 Jy
! Total flux subtracted in 200 components = 0.000474774 Jy
! Clean residual min=-0.002025 max=0.001739 Jy/beam
! Clean residual mean=0.000006 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.262824 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 200 components and 0.262824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051322Jy  sigma=0.936687
! Fit after  self-cal, rms=0.051318Jy  sigma=0.936623
wmodel J2211-1328_S_map.mod
! Writing 200 model components to file: J2211-1328_S_map.mod
wobs   J2211-1328_S_uvs.fits
! Writing UV FITS file: J2211-1328_S_uvs.fits
wwins  J2211-1328_S_map.win
! wwins: Wrote 3 windows to J2211-1328_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000201165 Jy
! Component: 100  -  total flux cleaned = -5.56589e-05 Jy
! Component: 150  -  total flux cleaned = 0.000163182 Jy
! Component: 200  -  total flux cleaned = 0.000294576 Jy
! Component: 250  -  total flux cleaned = 0.000394584 Jy
! Component: 300  -  total flux cleaned = 0.000467418 Jy
! Component: 350  -  total flux cleaned = 0.000490458 Jy
! Component: 400  -  total flux cleaned = 0.000535729 Jy
! Component: 450  -  total flux cleaned = 0.000580042 Jy
! Component: 500  -  total flux cleaned = 0.000601679 Jy
! Component: 550  -  total flux cleaned = 0.000687427 Jy
! Component: 600  -  total flux cleaned = 0.0007293 Jy
! Component: 650  -  total flux cleaned = 0.000770609 Jy
! Component: 700  -  total flux cleaned = 0.000811021 Jy
! Component: 750  -  total flux cleaned = 0.00085059 Jy
! Component: 800  -  total flux cleaned = 0.000869821 Jy
! Component: 850  -  total flux cleaned = 0.000888976 Jy
! Component: 900  -  total flux cleaned = 0.00094495 Jy
! Component: 950  -  total flux cleaned = 0.000926639 Jy
! Component: 1000  -  total flux cleaned = 0.000962944 Jy
! Component: 1050  -  total flux cleaned = 0.00101634 Jy
! Component: 1100  -  total flux cleaned = 0.00106899 Jy
! Component: 1150  -  total flux cleaned = 0.00115581 Jy
! Component: 1200  -  total flux cleaned = 0.00125828 Jy
! Component: 1250  -  total flux cleaned = 0.0013087 Jy
! Component: 1300  -  total flux cleaned = 0.00139215 Jy
! Component: 1350  -  total flux cleaned = 0.00149093 Jy
! Component: 1400  -  total flux cleaned = 0.00153945 Jy
! Component: 1450  -  total flux cleaned = 0.00158777 Jy
! Component: 1500  -  total flux cleaned = 0.00161948 Jy
! Component: 1550  -  total flux cleaned = 0.00166633 Jy
! Component: 1600  -  total flux cleaned = 0.00168181 Jy
! Component: 1650  -  total flux cleaned = 0.00166662 Jy
! Component: 1700  -  total flux cleaned = 0.0016972 Jy
! Component: 1750  -  total flux cleaned = 0.00171225 Jy
! Component: 1800  -  total flux cleaned = 0.00171247 Jy
! Component: 1850  -  total flux cleaned = 0.00172736 Jy
! Component: 1900  -  total flux cleaned = 0.00174212 Jy
! Component: 1950  -  total flux cleaned = 0.00171308 Jy
! Component: 2000  -  total flux cleaned = 0.0017275 Jy
! Component: 2050  -  total flux cleaned = 0.00174165 Jy
! Component: 2100  -  total flux cleaned = 0.00174175 Jy
! Component: 2150  -  total flux cleaned = 0.00169969 Jy
! Component: 2200  -  total flux cleaned = 0.00167193 Jy
! Component: 2250  -  total flux cleaned = 0.00165819 Jy
! Component: 2300  -  total flux cleaned = 0.00165814 Jy
! Component: 2350  -  total flux cleaned = 0.00167163 Jy
! Component: 2400  -  total flux cleaned = 0.00163148 Jy
! Component: 2450  -  total flux cleaned = 0.00165825 Jy
! Component: 2500  -  total flux cleaned = 0.00165821 Jy
! Component: 2550  -  total flux cleaned = 0.00167131 Jy
! Component: 2600  -  total flux cleaned = 0.00165818 Jy
! Component: 2650  -  total flux cleaned = 0.00165823 Jy
! Component: 2700  -  total flux cleaned = 0.0016583 Jy
! Component: 2750  -  total flux cleaned = 0.00167105 Jy
! Component: 2800  -  total flux cleaned = 0.00170899 Jy
! Component: 2850  -  total flux cleaned = 0.00172161 Jy
! Component: 2900  -  total flux cleaned = 0.00173412 Jy
! Component: 2950  -  total flux cleaned = 0.00177132 Jy
! Component: 3000  -  total flux cleaned = 0.00177123 Jy
! Component: 3050  -  total flux cleaned = 0.0017591 Jy
! Component: 3100  -  total flux cleaned = 0.00175916 Jy
! Component: 3150  -  total flux cleaned = 0.00184354 Jy
! Component: 3200  -  total flux cleaned = 0.00186752 Jy
! Component: 3250  -  total flux cleaned = 0.00186746 Jy
! Component: 3300  -  total flux cleaned = 0.00190292 Jy
! Component: 3350  -  total flux cleaned = 0.00191463 Jy
! Component: 3400  -  total flux cleaned = 0.00192629 Jy
! Component: 3450  -  total flux cleaned = 0.00191468 Jy
! Component: 3500  -  total flux cleaned = 0.0019606 Jy
! Component: 3550  -  total flux cleaned = 0.0019378 Jy
! Component: 3600  -  total flux cleaned = 0.00197189 Jy
! Component: 3650  -  total flux cleaned = 0.00197185 Jy
! Component: 3700  -  total flux cleaned = 0.00199429 Jy
! Component: 3750  -  total flux cleaned = 0.00198307 Jy
! Component: 3800  -  total flux cleaned = 0.00200524 Jy
! Component: 3850  -  total flux cleaned = 0.00203833 Jy
! Component: 3900  -  total flux cleaned = 0.00207107 Jy
! Component: 3950  -  total flux cleaned = 0.0020819 Jy
! Component: 4000  -  total flux cleaned = 0.00209281 Jy
! Component: 4050  -  total flux cleaned = 0.00213585 Jy
! Total flux subtracted in 4096 components = 0.00215723 Jy
! Clean residual min=-0.000599 max=0.000590 Jy/beam
! Clean residual mean=0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.264982 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 503 components and 0.264982 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv120_uvs/J2211-1328_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.369 x 10.55 at -0.9941 degrees (North through East)
! Clean map  min=-0.0014479  max=0.21353 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv120_uvs/J2211-1328_S_map.fits
wmodel /scr/pima/rv120_uvs/J2211-1328_S_map.mod
! Writing 503 model components to file: /scr/pima/rv120_uvs/J2211-1328_S_map.mod
wobs   /scr/pima/rv120_uvs/J2211-1328_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv120_uvs/J2211-1328_S_uvs.fits
wwins  /scr/pima/rv120_uvs/J2211-1328_S_map.win
! wwins: Wrote 4 windows to /scr/pima/rv120_uvs/J2211-1328_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.213526 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000209326 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.294098 0.294098 0.588196 1.17639 2.35278 4.70557 9.41113 18.8223 37.6445 75.289
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.213 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1020.07 
quit
! Quitting program
! Log file /scr/pima/rv120_uvs/J2211-1328_S_dfm.log closed on Fri Dec 22 22:36:18 2017