! Started logfile: /scr/pima/rv120_uvs/J2152+1734_X_dfm.log on Fri Dec 22 22:44:44 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J2152+1734_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J2152+1734_X_uva.fits ! AN table 1: 183 integrations on 55 of 55 possible baselines. ! AN table 2: 12 integrations on 45 of 45 possible baselines. ! AN table 3: 9 integrations on 1 of 1 possible baselines. ! AN table 4: 24 integrations on 3 of 3 possible baselines. ! AN table 5: 81 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.162137 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2152+1734 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7088 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2152+1734_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1552 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! A total of 123 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 1552 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! A total of 123 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 1552 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! A total of 123 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 1552 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! A total of 123 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.060751Jy sigma=15.226330 ! Fit after self-cal, rms=0.696497Jy sigma=10.455093 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6386 mas, bmaj=0.8515 mas, bpa=-9.666 degrees ! Estimated noise=1.00518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.235671 Jy ! Component: 100 - total flux cleaned = 0.294091 Jy ! Total flux subtracted in 100 components = 0.294091 Jy ! Clean residual min=-0.011264 max=0.023910 Jy/beam ! Clean residual mean=-0.000031 rms=0.002528 Jy/beam ! Combined flux in latest and established models = 0.29409 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.29409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125641Jy sigma=1.360968 ! Fit after self-cal, rms=0.125607Jy sigma=1.360813 ! Inverting map ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024649 Jy ! Component: 100 - total flux cleaned = 0.0281119 Jy ! Total flux subtracted in 100 components = 0.0281119 Jy ! Clean residual min=-0.009372 max=0.021031 Jy/beam ! Clean residual mean=-0.000024 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.322202 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 7 components and 0.322202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116250Jy sigma=1.246949 ! Fit after self-cal, rms=0.116121Jy sigma=1.246596 ! Inverting map ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-3.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179813 Jy ! Component: 100 - total flux cleaned = 0.0211727 Jy ! Total flux subtracted in 100 components = 0.0211727 Jy ! Clean residual min=-0.008203 max=0.014842 Jy/beam ! Clean residual mean=-0.000019 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 0.343375 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.343375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112238Jy sigma=1.149762 ! Fit after self-cal, rms=0.111590Jy sigma=1.146367 ! Inverting map ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100548 Jy ! Component: 100 - total flux cleaned = 0.0143638 Jy ! Total flux subtracted in 100 components = 0.0143638 Jy ! Clean residual min=-0.007060 max=0.013218 Jy/beam ! Clean residual mean=-0.000016 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.357739 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.357739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108689Jy sigma=1.095028 ! Fit after self-cal, rms=0.108095Jy sigma=1.089952 ! Inverting map ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-3.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951456 Jy ! Component: 100 - total flux cleaned = 0.0116426 Jy ! Total flux subtracted in 100 components = 0.0116426 Jy ! Clean residual min=-0.006740 max=0.009629 Jy/beam ! Clean residual mean=-0.000013 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.369381 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.369381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106001Jy sigma=1.050712 ! Fit after self-cal, rms=0.105683Jy sigma=1.047845 ! Inverting map ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.7644 mas, bmaj=0.9022 mas, bpa=-16.5 degrees ! Estimated noise=0.678968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136177 Jy ! Component: 100 - total flux cleaned = 0.0222835 Jy ! Component: 150 - total flux cleaned = 0.0244216 Jy ! Component: 200 - total flux cleaned = 0.0256013 Jy ! Total flux subtracted in 200 components = 0.0256013 Jy ! Clean residual min=-0.005601 max=0.007521 Jy/beam ! Clean residual mean=-0.000010 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.394983 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 35 components and 0.394983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103215Jy sigma=1.003972 ! Fit after self-cal, rms=0.102884Jy sigma=0.999956 ! Inverting map ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-4.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00751414 Jy ! Component: 100 - total flux cleaned = 0.00962397 Jy ! Component: 150 - total flux cleaned = 0.0108541 Jy ! Component: 200 - total flux cleaned = 0.011959 Jy ! Total flux subtracted in 200 components = 0.011959 Jy ! Clean residual min=-0.004773 max=0.004995 Jy/beam ! Clean residual mean=-0.000005 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.406942 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.406942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101535Jy sigma=0.984114 ! Fit after self-cal, rms=0.101373Jy sigma=0.982653 ! Inverting map ! Your choice of large map pixels excluded 12% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7644 x 0.9022 at -16.5 degrees (North through East) ! Clean map min=-0.0039531 max=0.30476 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HH 1.07 HN 1.05 ! LA 0.98 NL 1.00 NY 1.01 ON 0.95 ! OV 1.00 PT 1.00 SC 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 1.04 KP 1.03 ! LA 0.96 MK 1.00 NL 0.98 OV 1.02 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* KK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* NY 0.00* ! ! A total of 120 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HH 1.07 HN 1.07 ! LA 0.97 NL 1.01 NY 0.99 ON 0.97 ! OV 1.01 PT 1.00 SC 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 1.02 KP 1.03 ! LA 0.95 MK 1.02 NL 1.00 OV 1.00 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* KK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* NY 0.00* ! ! A total of 120 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HH 1.13 HN 1.05 ! LA 0.98 NL 1.00 NY 0.97 ON 0.99 ! OV 1.00 PT 1.01 SC 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 1.06 KP 1.03 ! LA 0.99 MK 1.06 NL 0.99 OV 0.99 ! PT 0.97 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* KK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* NY 0.00* ! ! A total of 120 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HH 1.09 HN 1.03 ! LA 0.95 NL 1.02 NY 0.98 ON 0.94 ! OV 1.00 PT 1.00 SC 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.99 KP 1.01 ! LA 0.96 MK 1.08 NL 1.01 OV 1.00 ! PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* KK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* NY 0.00* ! ! A total of 120 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* ON 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.101373Jy sigma=0.982653 ! Fit after self-cal, rms=0.093033Jy sigma=0.954575 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=0.7192 mas, bmaj=1.218 mas, bpa=-8.312 degrees ! Estimated noise=0.704729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269507 Jy ! Component: 100 - total flux cleaned = 0.0036112 Jy ! Component: 150 - total flux cleaned = 0.00407784 Jy ! Component: 200 - total flux cleaned = 0.00443168 Jy ! Total flux subtracted in 200 components = 0.00443168 Jy ! Clean residual min=-0.003209 max=0.003301 Jy/beam ! Clean residual mean=-0.000000 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.411374 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.411374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092765Jy sigma=0.951518 ! Fit after self-cal, rms=0.092818Jy sigma=0.951215 ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092818Jy sigma=0.951215 ! Fit after self-cal, rms=0.094695Jy sigma=0.945128 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=0.7197 mas, bmaj=1.222 mas, bpa=-8.529 degrees ! Estimated noise=0.70433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920515 Jy ! Component: 100 - total flux cleaned = 0.00147871 Jy ! Component: 150 - total flux cleaned = 0.00171876 Jy ! Component: 200 - total flux cleaned = 0.00182927 Jy ! Total flux subtracted in 200 components = 0.00182927 Jy ! Clean residual min=-0.002899 max=0.003485 Jy/beam ! Clean residual mean=0.000000 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.413203 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.413203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094566Jy sigma=0.944038 ! Fit after self-cal, rms=0.094556Jy sigma=0.943888 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49.8, 26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232804 Jy ! Component: 100 - total flux cleaned = 0.00257569 Jy ! Component: 150 - total flux cleaned = 0.00268849 Jy ! Component: 200 - total flux cleaned = 0.00274016 Jy ! Total flux subtracted in 200 components = 0.00274016 Jy ! Clean residual min=-0.003190 max=0.003048 Jy/beam ! Clean residual mean=-0.000001 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.415943 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.415943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094410Jy sigma=0.942047 ! Fit after self-cal, rms=0.094398Jy sigma=0.941959 ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094398Jy sigma=0.941959 ! Fit after self-cal, rms=0.095483Jy sigma=0.938795 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=0.7207 mas, bmaj=1.215 mas, bpa=-8.379 degrees ! Estimated noise=0.703921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019365 Jy ! Component: 100 - total flux cleaned = 0.000197277 Jy ! Component: 150 - total flux cleaned = 0.0001994 Jy ! Component: 200 - total flux cleaned = 0.00019982 Jy ! Total flux subtracted in 200 components = 0.00019982 Jy ! Clean residual min=-0.003030 max=0.002878 Jy/beam ! Clean residual mean=-0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.416143 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.416143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095404Jy sigma=0.938233 ! Fit after self-cal, rms=0.095408Jy sigma=0.938179 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.89105e-05 Jy ! Component: 100 - total flux cleaned = -0.000144623 Jy ! Component: 150 - total flux cleaned = -0.000184487 Jy ! Component: 200 - total flux cleaned = -0.00022164 Jy ! Total flux subtracted in 200 components = -0.00022164 Jy ! Clean residual min=-0.002971 max=0.002861 Jy/beam ! Clean residual mean=-0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.415921 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 0.415921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095353Jy sigma=0.937846 ! Fit after self-cal, rms=0.095353Jy sigma=0.937830 ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095353Jy sigma=0.937830 ! Fit after self-cal, rms=0.095809Jy sigma=0.937713 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=2.412 mas, bmaj=2.712 mas, bpa=2.474 degrees ! Estimated noise=0.843605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313979 Jy ! Component: 100 - total flux cleaned = -0.000466855 Jy ! Component: 150 - total flux cleaned = -0.00048424 Jy ! Component: 200 - total flux cleaned = -0.000528893 Jy ! Total flux subtracted in 200 components = -0.000528893 Jy ! Clean residual min=-0.002814 max=0.003191 Jy/beam ! Clean residual mean=-0.000001 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.415392 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 120 components and 0.415392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095813Jy sigma=0.937686 ! Fit after self-cal, rms=0.095819Jy sigma=0.937676 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.4, 32.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223376 Jy ! Component: 100 - total flux cleaned = 0.00247126 Jy ! Component: 150 - total flux cleaned = 0.00261164 Jy ! Component: 200 - total flux cleaned = 0.00268839 Jy ! Total flux subtracted in 200 components = 0.00268839 Jy ! Clean residual min=-0.002363 max=0.002824 Jy/beam ! Clean residual mean=-0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.418081 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 145 components and 0.418081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095780Jy sigma=0.936121 ! Fit after self-cal, rms=0.095775Jy sigma=0.936029 ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Added new window around map position (-31.2, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170531 Jy ! Component: 100 - total flux cleaned = 0.00151683 Jy ! Component: 150 - total flux cleaned = 0.00147935 Jy ! Component: 200 - total flux cleaned = 0.00162654 Jy ! Total flux subtracted in 200 components = 0.00162654 Jy ! Clean residual min=-0.002188 max=0.001795 Jy/beam ! Clean residual mean=-0.000005 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.419707 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 166 components and 0.419707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095731Jy sigma=0.934812 ! Fit after self-cal, rms=0.095738Jy sigma=0.934756 ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=0.7208 mas, bmaj=1.216 mas, bpa=-8.389 degrees ! Estimated noise=0.70397 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7208 x 1.216 at -8.389 degrees (North through East) ! Clean map min=-0.0021415 max=0.29791 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=0.6113 mas, bmaj=1.077 mas, bpa=-7.05 degrees ! Estimated noise=1.04512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228698 Jy ! Component: 100 - total flux cleaned = 0.283599 Jy ! Component: 150 - total flux cleaned = 0.311934 Jy ! Component: 200 - total flux cleaned = 0.331938 Jy ! Total flux subtracted in 200 components = 0.331938 Jy ! Clean residual min=-0.007100 max=0.012643 Jy/beam ! Clean residual mean=-0.000022 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.331938 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.331938 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=0.7208 mas, bmaj=1.216 mas, bpa=-8.389 degrees ! Estimated noise=0.70397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230911 Jy ! Component: 100 - total flux cleaned = 0.0390801 Jy ! Component: 150 - total flux cleaned = 0.0507049 Jy ! Component: 200 - total flux cleaned = 0.0593117 Jy ! Total flux subtracted in 200 components = 0.0593117 Jy ! Clean residual min=-0.003696 max=0.005144 Jy/beam ! Clean residual mean=-0.000011 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.39125 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 0.39125 Jy ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Added new window around map position (-0.6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647137 Jy ! Component: 100 - total flux cleaned = 0.0114722 Jy ! Component: 150 - total flux cleaned = 0.0155068 Jy ! Component: 200 - total flux cleaned = 0.0183906 Jy ! Total flux subtracted in 200 components = 0.0183906 Jy ! Clean residual min=-0.003671 max=0.003090 Jy/beam ! Clean residual mean=-0.000005 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.40964 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 61 components and 0.40964 Jy ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=2.412 mas, bmaj=2.712 mas, bpa=2.474 degrees ! Estimated noise=0.843605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413627 Jy ! Component: 100 - total flux cleaned = 0.00660366 Jy ! Component: 150 - total flux cleaned = 0.0081521 Jy ! Component: 200 - total flux cleaned = 0.00916322 Jy ! Total flux subtracted in 200 components = 0.00916322 Jy ! Clean residual min=-0.002150 max=0.002194 Jy/beam ! Clean residual mean=-0.000005 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.418803 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051583 Jy ! Component: 100 - total flux cleaned = 0.000924094 Jy ! Component: 150 - total flux cleaned = 0.0011378 Jy ! Component: 200 - total flux cleaned = 0.00128801 Jy ! Total flux subtracted in 200 components = 0.00128801 Jy ! Clean residual min=-0.002037 max=0.001896 Jy/beam ! Clean residual mean=-0.000005 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.420091 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 115 components and 0.420092 Jy ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! Estimated beam: bmin=0.7208 mas, bmaj=1.216 mas, bpa=-8.389 degrees ! Estimated noise=0.70397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109175 Jy ! Component: 100 - total flux cleaned = 0.000568779 Jy ! Component: 150 - total flux cleaned = 0.000739238 Jy ! Component: 200 - total flux cleaned = 0.000823511 Jy ! Total flux subtracted in 200 components = 0.000823511 Jy ! Clean residual min=-0.003396 max=0.002446 Jy/beam ! Clean residual mean=-0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.420915 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 136 components and 0.420915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097296Jy sigma=0.942757 ! Fit after self-cal, rms=0.097068Jy sigma=0.940051 wmodel J2152+1734_X_map.mod ! Writing 136 model components to file: J2152+1734_X_map.mod wobs J2152+1734_X_uvs.fits ! Writing UV FITS file: J2152+1734_X_uvs.fits wwins J2152+1734_X_map.win ! wwins: Wrote 10 windows to J2152+1734_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135598 Jy ! Component: 100 - total flux cleaned = -0.0021158 Jy ! Component: 150 - total flux cleaned = -0.00265646 Jy ! Component: 200 - total flux cleaned = -0.00313466 Jy ! Component: 250 - total flux cleaned = -0.00355856 Jy ! Component: 300 - total flux cleaned = -0.00401625 Jy ! Component: 350 - total flux cleaned = -0.00462766 Jy ! Component: 400 - total flux cleaned = -0.00510696 Jy ! Component: 450 - total flux cleaned = -0.00565594 Jy ! Component: 500 - total flux cleaned = -0.00611866 Jy ! Component: 550 - total flux cleaned = -0.00657411 Jy ! Component: 600 - total flux cleaned = -0.00694797 Jy ! Component: 650 - total flux cleaned = -0.00727906 Jy ! Component: 700 - total flux cleaned = -0.0075709 Jy ! Component: 750 - total flux cleaned = -0.00803816 Jy ! Component: 800 - total flux cleaned = -0.00814464 Jy ! Component: 850 - total flux cleaned = -0.00853098 Jy ! Component: 900 - total flux cleaned = -0.00870464 Jy ! Component: 950 - total flux cleaned = -0.00901383 Jy ! Component: 1000 - total flux cleaned = -0.00928528 Jy ! Component: 1050 - total flux cleaned = -0.0093519 Jy ! Component: 1100 - total flux cleaned = -0.0095844 Jy ! Component: 1150 - total flux cleaned = -0.00958452 Jy ! Component: 1200 - total flux cleaned = -0.00981261 Jy ! Component: 1250 - total flux cleaned = -0.00987734 Jy ! Component: 1300 - total flux cleaned = -0.00987689 Jy ! Component: 1350 - total flux cleaned = -0.00994046 Jy ! Component: 1400 - total flux cleaned = -0.00997156 Jy ! Component: 1450 - total flux cleaned = -0.00997158 Jy ! Component: 1500 - total flux cleaned = -0.0100337 Jy ! Component: 1550 - total flux cleaned = -0.00991027 Jy ! Component: 1600 - total flux cleaned = -0.0100017 Jy ! Component: 1650 - total flux cleaned = -0.0100019 Jy ! Component: 1700 - total flux cleaned = -0.0100022 Jy ! Component: 1750 - total flux cleaned = -0.0100618 Jy ! Component: 1800 - total flux cleaned = -0.0100917 Jy ! Component: 1850 - total flux cleaned = -0.0101507 Jy ! Component: 1900 - total flux cleaned = -0.0101215 Jy ! Component: 1950 - total flux cleaned = -0.0102665 Jy ! Component: 2000 - total flux cleaned = -0.010238 Jy ! Component: 2050 - total flux cleaned = -0.0102668 Jy ! Component: 2100 - total flux cleaned = -0.0102669 Jy ! Component: 2150 - total flux cleaned = -0.0103799 Jy ! Component: 2200 - total flux cleaned = -0.0103242 Jy ! Component: 2250 - total flux cleaned = -0.0104359 Jy ! Component: 2300 - total flux cleaned = -0.0104359 Jy ! Component: 2350 - total flux cleaned = -0.0104083 Jy ! Component: 2400 - total flux cleaned = -0.0104084 Jy ! Component: 2450 - total flux cleaned = -0.0104083 Jy ! Component: 2500 - total flux cleaned = -0.0103272 Jy ! Component: 2550 - total flux cleaned = -0.0103543 Jy ! Component: 2600 - total flux cleaned = -0.010381 Jy ! Component: 2650 - total flux cleaned = -0.0103543 Jy ! Component: 2700 - total flux cleaned = -0.0104599 Jy ! Component: 2750 - total flux cleaned = -0.0104336 Jy ! Component: 2800 - total flux cleaned = -0.0104596 Jy ! Component: 2850 - total flux cleaned = -0.0104595 Jy ! Component: 2900 - total flux cleaned = -0.0104596 Jy ! Component: 2950 - total flux cleaned = -0.0106395 Jy ! Component: 3000 - total flux cleaned = -0.0105885 Jy ! Component: 3050 - total flux cleaned = -0.0106394 Jy ! Component: 3100 - total flux cleaned = -0.0107906 Jy ! Component: 3150 - total flux cleaned = -0.0108659 Jy ! Component: 3200 - total flux cleaned = -0.0109408 Jy ! Component: 3250 - total flux cleaned = -0.0109657 Jy ! Component: 3300 - total flux cleaned = -0.0110401 Jy ! Component: 3350 - total flux cleaned = -0.0111383 Jy ! Component: 3400 - total flux cleaned = -0.0110896 Jy ! Component: 3450 - total flux cleaned = -0.0110896 Jy ! Component: 3500 - total flux cleaned = -0.0112593 Jy ! Component: 3550 - total flux cleaned = -0.0112833 Jy ! Component: 3600 - total flux cleaned = -0.0112354 Jy ! Component: 3650 - total flux cleaned = -0.011331 Jy ! Component: 3700 - total flux cleaned = -0.0113788 Jy ! Component: 3750 - total flux cleaned = -0.0113551 Jy ! Component: 3800 - total flux cleaned = -0.0113786 Jy ! Component: 3850 - total flux cleaned = -0.0114257 Jy ! Component: 3900 - total flux cleaned = -0.0114956 Jy ! Component: 3950 - total flux cleaned = -0.0115886 Jy ! Component: 4000 - total flux cleaned = -0.0115887 Jy ! Component: 4050 - total flux cleaned = -0.0115425 Jy ! Total flux subtracted in 4096 components = -0.011657 Jy ! Clean residual min=-0.001191 max=0.001394 Jy/beam ! Clean residual mean=-0.000000 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.409258 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 446 components and 0.409258 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J2152+1734_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7208 x 1.216 at -8.389 degrees (North through East) ! Clean map min=-0.0018812 max=0.2949 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J2152+1734_X_map.fits wmodel /scr/pima/rv120_uvs/J2152+1734_X_map.mod ! Writing 446 model components to file: /scr/pima/rv120_uvs/J2152+1734_X_map.mod wobs /scr/pima/rv120_uvs/J2152+1734_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J2152+1734_X_uvs.fits wwins /scr/pima/rv120_uvs/J2152+1734_X_map.win ! wwins: Wrote 11 windows to /scr/pima/rv120_uvs/J2152+1734_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.294896 invert ! Inverting map ! Your choice of large map pixels excluded 9.49% of the data. ! The x-axis pixel size should ideally be below 0.1687 milli-arcsec ! The y-axis pixel size should ideally be below 0.1731 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000359715 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.36594 0.36594 0.731881 1.46376 2.92752 5.85504 11.7101 23.4202 46.8404 93.6807 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.294 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 819.805 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J2152+1734_X_dfm.log closed on Fri Dec 22 22:44:50 2017