! Started logfile: /scr/pima/rv120_uvs/J2118-0636_X_dfm.log on Fri Dec 22 22:44:33 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J2118-0636_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J2118-0636_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974242 visibilities/baseline/integration-bin. ! Found source: J2118-0636 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7716 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2118-0636_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005403Jy sigma=21.068319 ! Fit after self-cal, rms=0.929671Jy sigma=19.472683 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7395 mas, bmaj=1.763 mas, bpa=-0.6049 degrees ! Estimated noise=0.724684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553904 Jy ! Component: 100 - total flux cleaned = 0.0674876 Jy ! Total flux subtracted in 100 components = 0.0674876 Jy ! Clean residual min=-0.003143 max=0.003408 Jy/beam ! Clean residual mean=0.000002 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0674876 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0674876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055196Jy sigma=0.930718 ! Fit after self-cal, rms=0.054948Jy sigma=0.928647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9412 mas, bmaj=2.073 mas, bpa=-0.5944 degrees ! Estimated noise=0.40971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414726 Jy ! Component: 100 - total flux cleaned = 0.00587399 Jy ! Component: 150 - total flux cleaned = 0.00618513 Jy ! Component: 200 - total flux cleaned = 0.00630426 Jy ! Total flux subtracted in 200 components = 0.00630426 Jy ! Clean residual min=-0.001768 max=0.001659 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0737919 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 0.0737919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054671Jy sigma=0.921609 ! Fit after self-cal, rms=0.054679Jy sigma=0.921502 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9412 x 2.073 at -0.5944 degrees (North through East) ! Clean map min=-0.0016548 max=0.071932 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.00 KP 1.01 ! LA 1.00 MK 0.95 NL 1.00 OV 0.97 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.01 KP 1.01 ! LA 0.99 MK 0.96 NL 0.99 OV 1.01 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.96 KP 0.99 ! LA 0.99 MK 1.02 NL 1.00 OV 1.02 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.05 KP 0.99 ! LA 0.98 MK 1.01 NL 1.01 OV 0.97 ! PT 1.01 SC 0.94 ! ! ! Fit before self-cal, rms=0.054679Jy sigma=0.921502 ! Fit after self-cal, rms=0.054210Jy sigma=0.920267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9365 mas, bmaj=2.068 mas, bpa=-0.621 degrees ! Estimated noise=0.407159 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228176 Jy ! Component: 100 - total flux cleaned = 0.000250049 Jy ! Component: 150 - total flux cleaned = 0.000269788 Jy ! Component: 200 - total flux cleaned = 0.000253245 Jy ! Total flux subtracted in 200 components = 0.000253245 Jy ! Clean residual min=-0.001635 max=0.001548 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0740452 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.0740452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054196Jy sigma=0.919901 ! Fit after self-cal, rms=0.054199Jy sigma=0.919845 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054199Jy sigma=0.919845 ! Fit after self-cal, rms=0.054359Jy sigma=0.917661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9339 mas, bmaj=2.066 mas, bpa=-0.7208 degrees ! Estimated noise=0.407062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297632 Jy ! Component: 100 - total flux cleaned = 0.000285327 Jy ! Component: 150 - total flux cleaned = 0.000273927 Jy ! Component: 200 - total flux cleaned = 0.000263755 Jy ! Total flux subtracted in 200 components = 0.000263755 Jy ! Clean residual min=-0.001570 max=0.001466 Jy/beam ! Clean residual mean=0.000002 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0743089 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.0743089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054353Jy sigma=0.917516 ! Fit after self-cal, rms=0.054359Jy sigma=0.917472 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.56084e-05 Jy ! Component: 100 - total flux cleaned = -4.47203e-05 Jy ! Component: 150 - total flux cleaned = -5.30106e-05 Jy ! Component: 200 - total flux cleaned = -6.03323e-05 Jy ! Total flux subtracted in 200 components = -6.03323e-05 Jy ! Clean residual min=-0.001555 max=0.001453 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0742486 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0742486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054357Jy sigma=0.917408 ! Fit after self-cal, rms=0.054356Jy sigma=0.917400 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054356Jy sigma=0.917400 ! Fit after self-cal, rms=0.054268Jy sigma=0.917373 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9323 mas, bmaj=2.062 mas, bpa=-0.8386 degrees ! Estimated noise=0.406795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183916 Jy ! Component: 100 - total flux cleaned = 0.000175274 Jy ! Component: 150 - total flux cleaned = 0.000167315 Jy ! Component: 200 - total flux cleaned = 0.00015329 Jy ! Total flux subtracted in 200 components = 0.00015329 Jy ! Clean residual min=-0.001545 max=0.001455 Jy/beam ! Clean residual mean=0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0744019 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0744019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054266Jy sigma=0.917311 ! Fit after self-cal, rms=0.054265Jy sigma=0.917306 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.19523e-05 Jy ! Component: 100 - total flux cleaned = -3.51895e-05 Jy ! Component: 150 - total flux cleaned = -4.11815e-05 Jy ! Component: 200 - total flux cleaned = -4.66432e-05 Jy ! Total flux subtracted in 200 components = -4.66432e-05 Jy ! Clean residual min=-0.001537 max=0.001448 Jy/beam ! Clean residual mean=0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0743552 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0743552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054263Jy sigma=0.917277 ! Fit after self-cal, rms=0.054263Jy sigma=0.917273 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054263Jy sigma=0.917273 ! Fit after self-cal, rms=0.054226Jy sigma=0.917258 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.224 mas, bmaj=3.627 mas, bpa=2.686 degrees ! Estimated noise=0.489088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012062 Jy ! Component: 100 - total flux cleaned = 0.000111314 Jy ! Component: 150 - total flux cleaned = 0.000128705 Jy ! Component: 200 - total flux cleaned = 0.000145121 Jy ! Total flux subtracted in 200 components = 0.000145121 Jy ! Clean residual min=-0.001717 max=0.001509 Jy/beam ! Clean residual mean=0.000005 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0745003 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.0745003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054226Jy sigma=0.917260 ! Fit after self-cal, rms=0.054223Jy sigma=0.917239 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.51238e-05 Jy ! Component: 100 - total flux cleaned = 4.55078e-05 Jy ! Component: 150 - total flux cleaned = 5.32084e-05 Jy ! Component: 200 - total flux cleaned = 6.74953e-05 Jy ! Total flux subtracted in 200 components = 6.74953e-05 Jy ! Clean residual min=-0.001713 max=0.001514 Jy/beam ! Clean residual mean=0.000005 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0745678 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.0745678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054225Jy sigma=0.917262 ! Fit after self-cal, rms=0.054224Jy sigma=0.917249 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9311 mas, bmaj=2.061 mas, bpa=-0.9519 degrees ! Estimated noise=0.406818 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9311 x 2.061 at -0.9519 degrees (North through East) ! Clean map min=-0.0014358 max=0.071604 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7335 mas, bmaj=1.755 mas, bpa=-0.8746 degrees ! Estimated noise=0.714146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547778 Jy ! Component: 100 - total flux cleaned = 0.0667884 Jy ! Component: 150 - total flux cleaned = 0.070577 Jy ! Component: 200 - total flux cleaned = 0.0720008 Jy ! Total flux subtracted in 200 components = 0.0720008 Jy ! Clean residual min=-0.002652 max=0.002519 Jy/beam ! Clean residual mean=0.000001 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0720007 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0720007 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9311 mas, bmaj=2.061 mas, bpa=-0.9519 degrees ! Estimated noise=0.406818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195468 Jy ! Component: 100 - total flux cleaned = 0.00251653 Jy ! Component: 150 - total flux cleaned = 0.00254437 Jy ! Component: 200 - total flux cleaned = 0.00256973 Jy ! Total flux subtracted in 200 components = 0.00256973 Jy ! Clean residual min=-0.001620 max=0.001448 Jy/beam ! Clean residual mean=0.000002 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0745705 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.0745705 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.224 mas, bmaj=3.627 mas, bpa=2.686 degrees ! Estimated noise=0.489088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.48245e-06 Jy ! Component: 100 - total flux cleaned = -2.70522e-05 Jy ! Component: 150 - total flux cleaned = -4.0095e-05 Jy ! Component: 200 - total flux cleaned = -1.87919e-05 Jy ! Total flux subtracted in 200 components = -1.87919e-05 Jy ! Clean residual min=-0.001745 max=0.001531 Jy/beam ! Clean residual mean=0.000005 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0745517 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04129e-05 Jy ! Component: 100 - total flux cleaned = 3.98918e-05 Jy ! Component: 150 - total flux cleaned = 4.93117e-05 Jy ! Component: 200 - total flux cleaned = 6.72966e-05 Jy ! Total flux subtracted in 200 components = 6.72966e-05 Jy ! Clean residual min=-0.001736 max=0.001533 Jy/beam ! Clean residual mean=0.000005 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.074619 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.074619 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9311 mas, bmaj=2.061 mas, bpa=-0.9519 degrees ! Estimated noise=0.406818 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158794 Jy ! Component: 100 - total flux cleaned = 8.62165e-05 Jy ! Component: 150 - total flux cleaned = 6.48821e-05 Jy ! Component: 200 - total flux cleaned = 5.50559e-05 Jy ! Total flux subtracted in 200 components = 5.50559e-05 Jy ! Clean residual min=-0.001575 max=0.001448 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.074674 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.074674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054231Jy sigma=0.917354 ! Fit after self-cal, rms=0.054235Jy sigma=0.917344 wmodel J2118-0636_X_map.mod ! Writing 37 model components to file: J2118-0636_X_map.mod wobs J2118-0636_X_uvs.fits ! Writing UV FITS file: J2118-0636_X_uvs.fits wwins J2118-0636_X_map.win ! wwins: Wrote 1 windows to J2118-0636_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260736 Jy ! Component: 100 - total flux cleaned = -0.000236698 Jy ! Component: 150 - total flux cleaned = -0.00021269 Jy ! Component: 200 - total flux cleaned = -0.000258904 Jy ! Component: 250 - total flux cleaned = -0.000191487 Jy ! Component: 300 - total flux cleaned = -0.000125684 Jy ! Component: 350 - total flux cleaned = -0.000104678 Jy ! Component: 400 - total flux cleaned = -0.00014656 Jy ! Component: 450 - total flux cleaned = -0.000126188 Jy ! Component: 500 - total flux cleaned = -0.00016597 Jy ! Component: 550 - total flux cleaned = -0.000145962 Jy ! Component: 600 - total flux cleaned = -0.000165268 Jy ! Component: 650 - total flux cleaned = -0.000184236 Jy ! Component: 700 - total flux cleaned = -0.00020306 Jy ! Component: 750 - total flux cleaned = -0.000239999 Jy ! Component: 800 - total flux cleaned = -0.000239972 Jy ! Component: 850 - total flux cleaned = -0.000276054 Jy ! Component: 900 - total flux cleaned = -0.000311365 Jy ! Component: 950 - total flux cleaned = -0.000311247 Jy ! Component: 1000 - total flux cleaned = -0.000293838 Jy ! Component: 1050 - total flux cleaned = -0.000276966 Jy ! Component: 1100 - total flux cleaned = -0.000293788 Jy ! Component: 1150 - total flux cleaned = -0.00026082 Jy ! Component: 1200 - total flux cleaned = -0.000326816 Jy ! Component: 1250 - total flux cleaned = -0.000310309 Jy ! Component: 1300 - total flux cleaned = -0.000245752 Jy ! Component: 1350 - total flux cleaned = -0.000197724 Jy ! Component: 1400 - total flux cleaned = -0.000213487 Jy ! Component: 1450 - total flux cleaned = -0.000213655 Jy ! Component: 1500 - total flux cleaned = -0.000197936 Jy ! Component: 1550 - total flux cleaned = -0.000213045 Jy ! Component: 1600 - total flux cleaned = -0.000213008 Jy ! Component: 1650 - total flux cleaned = -0.000152372 Jy ! Component: 1700 - total flux cleaned = -0.000197432 Jy ! Component: 1750 - total flux cleaned = -0.000182386 Jy ! Component: 1800 - total flux cleaned = -0.000153051 Jy ! Component: 1850 - total flux cleaned = -0.000167588 Jy ! Component: 1900 - total flux cleaned = -0.000138512 Jy ! Component: 1950 - total flux cleaned = -0.000109833 Jy ! Component: 2000 - total flux cleaned = -0.000110014 Jy ! Component: 2050 - total flux cleaned = -9.58472e-05 Jy ! Component: 2100 - total flux cleaned = -6.76469e-05 Jy ! Component: 2150 - total flux cleaned = -3.97041e-05 Jy ! Component: 2200 - total flux cleaned = -1.18224e-05 Jy ! Component: 2250 - total flux cleaned = 1.84133e-06 Jy ! Component: 2300 - total flux cleaned = -2.55421e-05 Jy ! Component: 2350 - total flux cleaned = 2.8908e-05 Jy ! Component: 2400 - total flux cleaned = 1.52752e-05 Jy ! Component: 2450 - total flux cleaned = 4.20742e-05 Jy ! Component: 2500 - total flux cleaned = 1.54863e-05 Jy ! Component: 2550 - total flux cleaned = 5.52795e-05 Jy ! Component: 2600 - total flux cleaned = 4.20765e-05 Jy ! Component: 2650 - total flux cleaned = 9.41283e-05 Jy ! Component: 2700 - total flux cleaned = 6.81164e-05 Jy ! Component: 2750 - total flux cleaned = 9.37033e-05 Jy ! Component: 2800 - total flux cleaned = 9.3837e-05 Jy ! Component: 2850 - total flux cleaned = 9.37163e-05 Jy ! Component: 2900 - total flux cleaned = 0.000144397 Jy ! Component: 2950 - total flux cleaned = 0.000119221 Jy ! Component: 3000 - total flux cleaned = 0.000106815 Jy ! Component: 3050 - total flux cleaned = 0.00013161 Jy ! Component: 3100 - total flux cleaned = 0.000168506 Jy ! Component: 3150 - total flux cleaned = 0.000131781 Jy ! Component: 3200 - total flux cleaned = 0.000131738 Jy ! Component: 3250 - total flux cleaned = 0.000168096 Jy ! Component: 3300 - total flux cleaned = 0.00024041 Jy ! Component: 3350 - total flux cleaned = 0.000216446 Jy ! Component: 3400 - total flux cleaned = 0.000228365 Jy ! Component: 3450 - total flux cleaned = 0.000240101 Jy ! Component: 3500 - total flux cleaned = 0.00028713 Jy ! Component: 3550 - total flux cleaned = 0.000263657 Jy ! Component: 3600 - total flux cleaned = 0.000321887 Jy ! Component: 3650 - total flux cleaned = 0.000333544 Jy ! Component: 3700 - total flux cleaned = 0.000310515 Jy ! Component: 3750 - total flux cleaned = 0.000299035 Jy ! Component: 3800 - total flux cleaned = 0.000333262 Jy ! Component: 3850 - total flux cleaned = 0.000344729 Jy ! Component: 3900 - total flux cleaned = 0.00036721 Jy ! Component: 3950 - total flux cleaned = 0.000344688 Jy ! Component: 4000 - total flux cleaned = 0.000378187 Jy ! Component: 4050 - total flux cleaned = 0.000389227 Jy ! Total flux subtracted in 4096 components = 0.000400304 Jy ! Clean residual min=-0.000704 max=0.000696 Jy/beam ! Clean residual mean=0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0750743 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 336 components and 0.0750744 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J2118-0636_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9311 x 2.061 at -0.9519 degrees (North through East) ! Clean map min=-0.001121 max=0.071224 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J2118-0636_X_map.fits wmodel /scr/pima/rv120_uvs/J2118-0636_X_map.mod ! Writing 336 model components to file: /scr/pima/rv120_uvs/J2118-0636_X_map.mod wobs /scr/pima/rv120_uvs/J2118-0636_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J2118-0636_X_uvs.fits wwins /scr/pima/rv120_uvs/J2118-0636_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv120_uvs/J2118-0636_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0712238 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000188608 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.79443 0.79443 1.58886 3.17772 6.35544 12.7109 25.4218 50.8435 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.071 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 377.629 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J2118-0636_X_dfm.log closed on Fri Dec 22 22:44:37 2017