! Started logfile: /scr/pima/rv120_uvs/J2118-0636_S_dfm.log on Fri Dec 22 22:35:58 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv120_uvs/J2118-0636_S_uva.fits
! Reading UV FITS file: /scr/pima/rv120_uvs/J2118-0636_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.95202 visibilities/baseline/integration-bin.
! Found source: J2118-0636
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7540 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2118-0636_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.003074Jy  sigma=21.441740
! Fit after  self-cal, rms=0.942510Jy  sigma=20.125079
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.699 mas, bmaj=6.515 mas, bpa=-0.9418 degrees
! Estimated noise=0.705979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463232 Jy
! Component: 100  -  total flux cleaned = 0.0564735 Jy
! Total flux subtracted in 100 components = 0.0564735 Jy
! Clean residual min=-0.003814 max=0.004228 Jy/beam
! Clean residual mean=0.000001 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.0564735 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0564735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055044Jy  sigma=1.080850
! Fit after  self-cal, rms=0.054324Jy  sigma=1.066113
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.285 mas, bmaj=7.415 mas, bpa=-1.079 degrees
! Estimated noise=0.412825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016103 Jy
! Component: 100  -  total flux cleaned = 0.00137869 Jy
! Component: 150  -  total flux cleaned = 0.00143866 Jy
! Component: 200  -  total flux cleaned = 0.00148522 Jy
! Total flux subtracted in 200 components = 0.00148522 Jy
! Clean residual min=-0.002029 max=0.001900 Jy/beam
! Clean residual mean=-0.000000 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.0579587 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0579587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054122Jy  sigma=1.061222
! Fit after  self-cal, rms=0.054115Jy  sigma=1.061090
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.285 x 7.415 at -1.079 degrees (North through East)
! Clean map  min=-0.0019091  max=0.060164 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.07     HN        0.99     KP        0.94     
!   LA        0.98     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.07     HN        0.96     KP        0.94     
!   LA        0.96     MK        0.93     NL        1.03     OV        1.00     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.28     FD        1.18     HN        1.07     KP        1.00*    
!   LA        1.10     MK        0.75     NL        1.00*    OV        1.26     
!   PT        1.14     SC        0.71     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.94     
!   LA        0.99     MK        0.96     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.054115Jy  sigma=1.061090
! Fit after  self-cal, rms=0.053183Jy  sigma=1.048826
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.204 mas, bmaj=7.363 mas, bpa=-1.478 degrees
! Estimated noise=0.409125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000893025 Jy
! Component: 100  -  total flux cleaned = 0.000892243 Jy
! Component: 150  -  total flux cleaned = 0.000891684 Jy
! Component: 200  -  total flux cleaned = 0.000892962 Jy
! Total flux subtracted in 200 components = 0.000892962 Jy
! Clean residual min=-0.001687 max=0.001697 Jy/beam
! Clean residual mean=0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.0588517 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 17 components and 0.0588517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053159Jy  sigma=1.048256
! Fit after  self-cal, rms=0.053639Jy  sigma=1.044446
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053639Jy  sigma=1.044446
! Fit after  self-cal, rms=0.054908Jy  sigma=1.039700
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.169 mas, bmaj=7.319 mas, bpa=-1.34 degrees
! Estimated noise=0.409522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00047159 Jy
! Component: 100  -  total flux cleaned = 0.000471503 Jy
! Component: 150  -  total flux cleaned = 0.000508869 Jy
! Component: 200  -  total flux cleaned = 0.000542956 Jy
! Total flux subtracted in 200 components = 0.000542956 Jy
! Clean residual min=-0.001465 max=0.001682 Jy/beam
! Clean residual mean=-0.000000 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0593946 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 23 components and 0.0593946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054900Jy  sigma=1.039509
! Fit after  self-cal, rms=0.055151Jy  sigma=1.039128
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (91.5, 40.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127391 Jy
! Component: 100  -  total flux cleaned = 0.00123485 Jy
! Component: 150  -  total flux cleaned = 0.00123116 Jy
! Component: 200  -  total flux cleaned = 0.00122884 Jy
! Total flux subtracted in 200 components = 0.00122884 Jy
! Clean residual min=-0.001485 max=0.001431 Jy/beam
! Clean residual mean=0.000000 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.0606235 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.0606235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055079Jy  sigma=1.037488
! Fit after  self-cal, rms=0.055088Jy  sigma=1.037339
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055088Jy  sigma=1.037339
! Fit after  self-cal, rms=0.055674Jy  sigma=1.037174
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.162 mas, bmaj=7.305 mas, bpa=-1.297 degrees
! Estimated noise=0.409183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.81699e-05 Jy
! Component: 100  -  total flux cleaned = 4.98228e-05 Jy
! Component: 150  -  total flux cleaned = 2.59626e-05 Jy
! Component: 200  -  total flux cleaned = 4.65189e-05 Jy
! Total flux subtracted in 200 components = 4.65189e-05 Jy
! Clean residual min=-0.001393 max=0.001375 Jy/beam
! Clean residual mean=0.000000 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.06067 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.06067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055649Jy  sigma=1.036620
! Fit after  self-cal, rms=0.055743Jy  sigma=1.036530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.93696e-05 Jy
! Component: 100  -  total flux cleaned = -3.20114e-05 Jy
! Component: 150  -  total flux cleaned = 1.38432e-06 Jy
! Component: 200  -  total flux cleaned = 4.56883e-05 Jy
! Total flux subtracted in 200 components = 4.56883e-05 Jy
! Clean residual min=-0.001389 max=0.001341 Jy/beam
! Clean residual mean=0.000000 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.0607157 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 50 components and 0.0607157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055732Jy  sigma=1.036271
! Fit after  self-cal, rms=0.055742Jy  sigma=1.036226
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055742Jy  sigma=1.036226
! Fit after  self-cal, rms=0.056053Jy  sigma=1.036172
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.516 mas, bmaj=12.24 mas, bpa=3.723 degrees
! Estimated noise=0.53691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.73907e-05 Jy
! Component: 100  -  total flux cleaned = 0.000159384 Jy
! Component: 150  -  total flux cleaned = 0.000187561 Jy
! Component: 200  -  total flux cleaned = 0.00020312 Jy
! Total flux subtracted in 200 components = 0.00020312 Jy
! Clean residual min=-0.001385 max=0.001703 Jy/beam
! Clean residual mean=0.000001 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0609188 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 61 components and 0.0609188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056053Jy  sigma=1.036175
! Fit after  self-cal, rms=0.056074Jy  sigma=1.036141
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.26572e-06 Jy
! Component: 100  -  total flux cleaned = 1.35658e-05 Jy
! Component: 150  -  total flux cleaned = -1.05223e-06 Jy
! Component: 200  -  total flux cleaned = -9.86519e-07 Jy
! Total flux subtracted in 200 components = -9.86519e-07 Jy
! Clean residual min=-0.001394 max=0.001696 Jy/beam
! Clean residual mean=0.000001 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.0609178 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.0609178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056075Jy  sigma=1.036136
! Fit after  self-cal, rms=0.056074Jy  sigma=1.036121
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.16 mas, bmaj=7.302 mas, bpa=-1.312 degrees
! Estimated noise=0.409426 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.16 x 7.302 at -1.312 degrees (North through East)
! Clean map  min=-0.0014461  max=0.059453 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.591 mas, bmaj=6.469 mas, bpa=-1.06 degrees
! Estimated noise=0.683758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0457331 Jy
! Component: 100  -  total flux cleaned = 0.055753 Jy
! Component: 150  -  total flux cleaned = 0.0590886 Jy
! Component: 200  -  total flux cleaned = 0.0603594 Jy
! Total flux subtracted in 200 components = 0.0603594 Jy
! Clean residual min=-0.003183 max=0.003158 Jy/beam
! Clean residual mean=0.000001 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.0603594 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0603594 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.16 mas, bmaj=7.302 mas, bpa=-1.312 degrees
! Estimated noise=0.409426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000752678 Jy
! Component: 100  -  total flux cleaned = 0.000749556 Jy
! Component: 150  -  total flux cleaned = 0.000751096 Jy
! Component: 200  -  total flux cleaned = 0.000751597 Jy
! Total flux subtracted in 200 components = 0.000751597 Jy
! Clean residual min=-0.001572 max=0.001531 Jy/beam
! Clean residual mean=0.000000 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.061111 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.061111 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.516 mas, bmaj=12.24 mas, bpa=3.723 degrees
! Estimated noise=0.53691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126551 Jy
! Component: 100  -  total flux cleaned = 5.35028e-05 Jy
! Component: 150  -  total flux cleaned = 3.57267e-05 Jy
! Component: 200  -  total flux cleaned = 3.69545e-05 Jy
! Total flux subtracted in 200 components = 3.69545e-05 Jy
! Clean residual min=-0.001412 max=0.001756 Jy/beam
! Clean residual mean=0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.061148 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.76456e-05 Jy
! Component: 100  -  total flux cleaned = -5.97753e-05 Jy
! Component: 150  -  total flux cleaned = -7.97311e-05 Jy
! Component: 200  -  total flux cleaned = -7.94236e-05 Jy
! Total flux subtracted in 200 components = -7.94236e-05 Jy
! Clean residual min=-0.001376 max=0.001742 Jy/beam
! Clean residual mean=0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0610685 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 56 components and 0.0610685 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.16 mas, bmaj=7.302 mas, bpa=-1.312 degrees
! Estimated noise=0.409426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161471 Jy
! Component: 100  -  total flux cleaned = 0.000130943 Jy
! Component: 150  -  total flux cleaned = 0.000101133 Jy
! Component: 200  -  total flux cleaned = 4.72321e-05 Jy
! Total flux subtracted in 200 components = 4.72321e-05 Jy
! Clean residual min=-0.001477 max=0.001433 Jy/beam
! Clean residual mean=0.000000 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0611158 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.0611158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056098Jy  sigma=1.036805
! Fit after  self-cal, rms=0.056055Jy  sigma=1.036683
wmodel J2118-0636_S_map.mod
! Writing 67 model components to file: J2118-0636_S_map.mod
wobs   J2118-0636_S_uvs.fits
! Writing UV FITS file: J2118-0636_S_uvs.fits
wwins  J2118-0636_S_map.win
! wwins: Wrote 2 windows to J2118-0636_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271458 Jy
! Component: 100  -  total flux cleaned = -0.000321957 Jy
! Component: 150  -  total flux cleaned = -0.000370532 Jy
! Component: 200  -  total flux cleaned = -0.000440661 Jy
! Component: 250  -  total flux cleaned = -0.000531456 Jy
! Component: 300  -  total flux cleaned = -0.000664107 Jy
! Component: 350  -  total flux cleaned = -0.000750457 Jy
! Component: 400  -  total flux cleaned = -0.000834702 Jy
! Component: 450  -  total flux cleaned = -0.000855438 Jy
! Component: 500  -  total flux cleaned = -0.000937349 Jy
! Component: 550  -  total flux cleaned = -0.00101772 Jy
! Component: 600  -  total flux cleaned = -0.00107702 Jy
! Component: 650  -  total flux cleaned = -0.00117374 Jy
! Component: 700  -  total flux cleaned = -0.00117358 Jy
! Component: 750  -  total flux cleaned = -0.00124895 Jy
! Component: 800  -  total flux cleaned = -0.0012861 Jy
! Component: 850  -  total flux cleaned = -0.00137771 Jy
! Component: 900  -  total flux cleaned = -0.00143184 Jy
! Component: 950  -  total flux cleaned = -0.00150342 Jy
! Component: 1000  -  total flux cleaned = -0.00157353 Jy
! Component: 1050  -  total flux cleaned = -0.00169464 Jy
! Component: 1100  -  total flux cleaned = -0.00178 Jy
! Component: 1150  -  total flux cleaned = -0.00184761 Jy
! Component: 1200  -  total flux cleaned = -0.00196438 Jy
! Component: 1250  -  total flux cleaned = -0.00199724 Jy
! Component: 1300  -  total flux cleaned = -0.00206247 Jy
! Component: 1350  -  total flux cleaned = -0.00214307 Jy
! Component: 1400  -  total flux cleaned = -0.00223865 Jy
! Component: 1450  -  total flux cleaned = -0.00230163 Jy
! Component: 1500  -  total flux cleaned = -0.00236407 Jy
! Component: 1550  -  total flux cleaned = -0.00242586 Jy
! Component: 1600  -  total flux cleaned = -0.00253298 Jy
! Component: 1650  -  total flux cleaned = -0.00253307 Jy
! Component: 1700  -  total flux cleaned = -0.00259325 Jy
! Component: 1750  -  total flux cleaned = -0.0026827 Jy
! Component: 1800  -  total flux cleaned = -0.00274159 Jy
! Component: 1850  -  total flux cleaned = -0.00277074 Jy
! Component: 1900  -  total flux cleaned = -0.00282881 Jy
! Component: 1950  -  total flux cleaned = -0.00284317 Jy
! Component: 2000  -  total flux cleaned = -0.00292885 Jy
! Component: 2050  -  total flux cleaned = -0.00290047 Jy
! Component: 2100  -  total flux cleaned = -0.00294264 Jy
! Component: 2150  -  total flux cleaned = -0.00295651 Jy
! Component: 2200  -  total flux cleaned = -0.00298431 Jy
! Component: 2250  -  total flux cleaned = -0.00297068 Jy
! Component: 2300  -  total flux cleaned = -0.00306587 Jy
! Component: 2350  -  total flux cleaned = -0.00309299 Jy
! Component: 2400  -  total flux cleaned = -0.00309308 Jy
! Component: 2450  -  total flux cleaned = -0.00309311 Jy
! Component: 2500  -  total flux cleaned = -0.00313261 Jy
! Component: 2550  -  total flux cleaned = -0.0031589 Jy
! Component: 2600  -  total flux cleaned = -0.00318473 Jy
! Component: 2650  -  total flux cleaned = -0.00323633 Jy
! Component: 2700  -  total flux cleaned = -0.00318495 Jy
! Component: 2750  -  total flux cleaned = -0.00317242 Jy
! Component: 2800  -  total flux cleaned = -0.00324847 Jy
! Component: 2850  -  total flux cleaned = -0.00324825 Jy
! Component: 2900  -  total flux cleaned = -0.00324831 Jy
! Component: 2950  -  total flux cleaned = -0.00327312 Jy
! Component: 3000  -  total flux cleaned = -0.00327321 Jy
! Component: 3050  -  total flux cleaned = -0.00328546 Jy
! Component: 3100  -  total flux cleaned = -0.00330976 Jy
! Component: 3150  -  total flux cleaned = -0.00333385 Jy
! Component: 3200  -  total flux cleaned = -0.00335794 Jy
! Component: 3250  -  total flux cleaned = -0.00339379 Jy
! Component: 3300  -  total flux cleaned = -0.00344125 Jy
! Component: 3350  -  total flux cleaned = -0.00339403 Jy
! Component: 3400  -  total flux cleaned = -0.00346437 Jy
! Component: 3450  -  total flux cleaned = -0.00346451 Jy
! Component: 3500  -  total flux cleaned = -0.00351073 Jy
! Component: 3550  -  total flux cleaned = -0.00354516 Jy
! Component: 3600  -  total flux cleaned = -0.00353375 Jy
! Component: 3650  -  total flux cleaned = -0.00359053 Jy
! Component: 3700  -  total flux cleaned = -0.0036357 Jy
! Component: 3750  -  total flux cleaned = -0.00365815 Jy
! Component: 3800  -  total flux cleaned = -0.00369163 Jy
! Component: 3850  -  total flux cleaned = -0.00369167 Jy
! Component: 3900  -  total flux cleaned = -0.00369175 Jy
! Component: 3950  -  total flux cleaned = -0.00372473 Jy
! Component: 4000  -  total flux cleaned = -0.00370286 Jy
! Component: 4050  -  total flux cleaned = -0.00371377 Jy
! Total flux subtracted in 4096 components = -0.00370296 Jy
! Clean residual min=-0.000686 max=0.000614 Jy/beam
! Clean residual mean=0.000001 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.0574128 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 355 components and 0.0574128 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv120_uvs/J2118-0636_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.16 x 7.302 at -1.312 degrees (North through East)
! Clean map  min=-0.0013804  max=0.0589 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv120_uvs/J2118-0636_S_map.fits
wmodel /scr/pima/rv120_uvs/J2118-0636_S_map.mod
! Writing 355 model components to file: /scr/pima/rv120_uvs/J2118-0636_S_map.mod
wobs   /scr/pima/rv120_uvs/J2118-0636_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv120_uvs/J2118-0636_S_uvs.fits
wwins  /scr/pima/rv120_uvs/J2118-0636_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv120_uvs/J2118-0636_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0588998 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00019653 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.00101 1.00101 2.00201 4.00402 8.00804 16.0161 32.0322 64.0644
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.058 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  299.698 
quit
! Quitting program
! Log file /scr/pima/rv120_uvs/J2118-0636_S_dfm.log closed on Fri Dec 22 22:36:02 2017