! Started logfile: /scr/pima/rv120_uvs/J1958-2052_S_dfm.log on Fri Dec 22 22:35:44 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv120_uvs/J1958-2052_S_uva.fits
! Reading UV FITS file: /scr/pima/rv120_uvs/J1958-2052_S_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.952874 visibilities/baseline/integration-bin.
! Found source: J1958-2052
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 9948 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1958-2052_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
!  A total of 116 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.002844Jy  sigma=19.543150
! Fit after  self-cal, rms=0.962995Jy  sigma=18.757099
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.387 mas, bmaj=6.305 mas, bpa=-2.205 degrees
! Estimated noise=0.718993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0316393 Jy
! Component: 100  -  total flux cleaned = 0.0340934 Jy
! Total flux subtracted in 100 components = 0.0340934 Jy
! Clean residual min=-0.005299 max=0.005955 Jy/beam
! Clean residual mean=-0.000003 rms=0.001409 Jy/beam
! Combined flux in latest and established models = 0.0340934 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0340934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063132Jy  sigma=1.128602
! Fit after  self-cal, rms=0.061531Jy  sigma=1.098319
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.036 mas, bmaj=7.467 mas, bpa=-0.9448 degrees
! Estimated noise=0.394817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00415852 Jy
! Component: 100  -  total flux cleaned = 0.00395987 Jy
! Component: 150  -  total flux cleaned = 0.00373073 Jy
! Component: 200  -  total flux cleaned = 0.00361386 Jy
! Total flux subtracted in 200 components = 0.00361386 Jy
! Clean residual min=-0.002473 max=0.003054 Jy/beam
! Clean residual mean=-0.000003 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.0377073 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0377073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061092Jy  sigma=1.089198
! Fit after  self-cal, rms=0.061057Jy  sigma=1.089003
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.036 x 7.467 at -0.9448 degrees (North through East)
! Clean map  min=-0.0023554  max=0.042697 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.13     KP        0.94     
!   LA        1.03     MK        1.05     NL        1.03     OV        0.95     
!   PT        1.04     SC        1.16     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.17     KP        0.97     
!   LA        1.01     MK        1.07     NL        1.03     OV        0.96     
!   PT        0.96     SC        1.19     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.13     HN        1.07     KP        1.00*    
!   LA        1.11     MK        0.54     NL        1.00*    OV        1.05     
!   PT        1.20     SC        0.50     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.19     KP        0.89     
!   LA        1.04     MK        1.05     NL        0.95     OV        0.92     
!   PT        1.05     SC        1.25     
! 
! 
! Fit before self-cal, rms=0.061057Jy  sigma=1.089003
! Fit after  self-cal, rms=0.058635Jy  sigma=1.055907
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.892 mas, bmaj=7.293 mas, bpa=-1.035 degrees
! Estimated noise=0.389435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000292621 Jy
! Component: 100  -  total flux cleaned = 0.000385957 Jy
! Component: 150  -  total flux cleaned = 0.000416985 Jy
! Component: 200  -  total flux cleaned = 0.000446277 Jy
! Total flux subtracted in 200 components = 0.000446277 Jy
! Clean residual min=-0.001863 max=0.002045 Jy/beam
! Clean residual mean=-0.000003 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0381536 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.0381536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058626Jy  sigma=1.055539
! Fit after  self-cal, rms=0.059263Jy  sigma=1.048733
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059263Jy  sigma=1.048733
! Fit after  self-cal, rms=0.060914Jy  sigma=1.044480
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=7.367 mas, bpa=-1.406 degrees
! Estimated noise=0.392951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000512799 Jy
! Component: 100  -  total flux cleaned = -0.000531324 Jy
! Component: 150  -  total flux cleaned = -0.000516501 Jy
! Component: 200  -  total flux cleaned = -0.000490906 Jy
! Total flux subtracted in 200 components = -0.000490906 Jy
! Clean residual min=-0.001872 max=0.001979 Jy/beam
! Clean residual mean=-0.000004 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.0376626 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.0376626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060901Jy  sigma=1.044238
! Fit after  self-cal, rms=0.061117Jy  sigma=1.043289
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188543 Jy
! Component: 100  -  total flux cleaned = 0.00214057 Jy
! Component: 150  -  total flux cleaned = 0.00213941 Jy
! Component: 200  -  total flux cleaned = 0.00208363 Jy
! Total flux subtracted in 200 components = 0.00208363 Jy
! Clean residual min=-0.001770 max=0.001657 Jy/beam
! Clean residual mean=-0.000003 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0397463 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 53 components and 0.0397463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061054Jy  sigma=1.041790
! Fit after  self-cal, rms=0.061040Jy  sigma=1.041495
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061040Jy  sigma=1.041495
! Fit after  self-cal, rms=0.062373Jy  sigma=1.040887
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.856 mas, bmaj=7.453 mas, bpa=-1.34 degrees
! Estimated noise=0.394892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000938696 Jy
! Component: 100  -  total flux cleaned = 0.000907563 Jy
! Component: 150  -  total flux cleaned = 0.000824403 Jy
! Component: 200  -  total flux cleaned = 0.000750445 Jy
! Total flux subtracted in 200 components = 0.000750445 Jy
! Clean residual min=-0.001684 max=0.001652 Jy/beam
! Clean residual mean=-0.000003 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0404967 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 0.0404967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062338Jy  sigma=1.040164
! Fit after  self-cal, rms=0.062439Jy  sigma=1.039584
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000453864 Jy
! Component: 100  -  total flux cleaned = 0.000455443 Jy
! Component: 150  -  total flux cleaned = 0.000435657 Jy
! Component: 200  -  total flux cleaned = 0.000416551 Jy
! Total flux subtracted in 200 components = 0.000416551 Jy
! Clean residual min=-0.001660 max=0.001598 Jy/beam
! Clean residual mean=-0.000003 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0409133 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.0409133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062423Jy  sigma=1.039303
! Fit after  self-cal, rms=0.062416Jy  sigma=1.039259
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062416Jy  sigma=1.039259
! Fit after  self-cal, rms=0.063386Jy  sigma=1.038959
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.692 mas, bmaj=16.03 mas, bpa=5.402 degrees
! Estimated noise=0.520374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472791 Jy
! Component: 100  -  total flux cleaned = 0.000485711 Jy
! Component: 150  -  total flux cleaned = 0.000475502 Jy
! Component: 200  -  total flux cleaned = 0.000466234 Jy
! Total flux subtracted in 200 components = 0.000466234 Jy
! Clean residual min=-0.001743 max=0.001760 Jy/beam
! Clean residual mean=-0.000007 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.0413795 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.0413795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063377Jy  sigma=1.038813
! Fit after  self-cal, rms=0.063440Jy  sigma=1.038606
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023808 Jy
! Component: 100  -  total flux cleaned = 0.000227663 Jy
! Component: 150  -  total flux cleaned = 0.00021906 Jy
! Component: 200  -  total flux cleaned = 0.00021927 Jy
! Total flux subtracted in 200 components = 0.00021927 Jy
! Clean residual min=-0.001698 max=0.001749 Jy/beam
! Clean residual mean=-0.000008 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.0415988 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 0.0415988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063435Jy  sigma=1.038536
! Fit after  self-cal, rms=0.063437Jy  sigma=1.038522
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.862 mas, bmaj=7.515 mas, bpa=-1.272 degrees
! Estimated noise=0.396561 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.862 x 7.515 at -1.272 degrees (North through East)
! Clean map  min=-0.0015947  max=0.041399 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.223 mas, bmaj=6.443 mas, bpa=-2.336 degrees
! Estimated noise=0.69801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0329874 Jy
! Component: 100  -  total flux cleaned = 0.0389465 Jy
! Component: 150  -  total flux cleaned = 0.0403534 Jy
! Component: 200  -  total flux cleaned = 0.0413057 Jy
! Total flux subtracted in 200 components = 0.0413057 Jy
! Clean residual min=-0.003484 max=0.003048 Jy/beam
! Clean residual mean=0.000001 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.0413057 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0413057 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.862 mas, bmaj=7.515 mas, bpa=-1.272 degrees
! Estimated noise=0.396561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00085597 Jy
! Component: 100  -  total flux cleaned = 0.000869357 Jy
! Component: 150  -  total flux cleaned = 0.000770478 Jy
! Component: 200  -  total flux cleaned = 0.000728596 Jy
! Total flux subtracted in 200 components = 0.000728596 Jy
! Clean residual min=-0.001713 max=0.001660 Jy/beam
! Clean residual mean=-0.000003 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0420343 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 31 components and 0.0420343 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.692 mas, bmaj=16.03 mas, bpa=5.402 degrees
! Estimated noise=0.520374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.59809e-05 Jy
! Component: 100  -  total flux cleaned = -7.50146e-05 Jy
! Component: 150  -  total flux cleaned = -0.000127571 Jy
! Component: 200  -  total flux cleaned = -0.000172769 Jy
! Total flux subtracted in 200 components = -0.000172769 Jy
! Clean residual min=-0.001666 max=0.001772 Jy/beam
! Clean residual mean=-0.000008 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.0418615 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.95199e-05 Jy
! Component: 100  -  total flux cleaned = -5.72461e-05 Jy
! Component: 150  -  total flux cleaned = -9.08679e-05 Jy
! Component: 200  -  total flux cleaned = -0.000114017 Jy
! Total flux subtracted in 200 components = -0.000114017 Jy
! Clean residual min=-0.001682 max=0.001766 Jy/beam
! Clean residual mean=-0.000008 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.0417475 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.0417475 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.862 mas, bmaj=7.515 mas, bpa=-1.272 degrees
! Estimated noise=0.396561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000142017 Jy
! Component: 100  -  total flux cleaned = -0.000205626 Jy
! Component: 150  -  total flux cleaned = -0.000234182 Jy
! Component: 200  -  total flux cleaned = -0.000284905 Jy
! Total flux subtracted in 200 components = -0.000284905 Jy
! Clean residual min=-0.001633 max=0.001583 Jy/beam
! Clean residual mean=-0.000004 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.0414626 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 0.0414626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063454Jy  sigma=1.038993
! Fit after  self-cal, rms=0.063456Jy  sigma=1.038821
wmodel J1958-2052_S_map.mod
! Writing 59 model components to file: J1958-2052_S_map.mod
wobs   J1958-2052_S_uvs.fits
! Writing UV FITS file: J1958-2052_S_uvs.fits
wwins  J1958-2052_S_map.win
! wwins: Wrote 2 windows to J1958-2052_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.99073e-05 Jy
! Component: 100  -  total flux cleaned = -2.71172e-06 Jy
! Component: 150  -  total flux cleaned = 5.27379e-05 Jy
! Component: 200  -  total flux cleaned = 0.000159435 Jy
! Component: 250  -  total flux cleaned = 0.000185403 Jy
! Component: 300  -  total flux cleaned = 0.000235309 Jy
! Component: 350  -  total flux cleaned = 0.000235251 Jy
! Component: 400  -  total flux cleaned = 0.000283995 Jy
! Component: 450  -  total flux cleaned = 0.000307772 Jy
! Component: 500  -  total flux cleaned = 0.000330897 Jy
! Component: 550  -  total flux cleaned = 0.000308111 Jy
! Component: 600  -  total flux cleaned = 0.000330824 Jy
! Component: 650  -  total flux cleaned = 0.000286339 Jy
! Component: 700  -  total flux cleaned = 0.00024263 Jy
! Component: 750  -  total flux cleaned = 0.000156815 Jy
! Component: 800  -  total flux cleaned = 0.000114953 Jy
! Component: 850  -  total flux cleaned = 0.000114859 Jy
! Component: 900  -  total flux cleaned = 9.40169e-05 Jy
! Component: 950  -  total flux cleaned = 3.31004e-05 Jy
! Component: 1000  -  total flux cleaned = 1.28315e-05 Jy
! Component: 1050  -  total flux cleaned = -6.98055e-06 Jy
! Component: 1100  -  total flux cleaned = -2.65362e-05 Jy
! Component: 1150  -  total flux cleaned = -6.52712e-05 Jy
! Component: 1200  -  total flux cleaned = -2.72361e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000102825 Jy
! Component: 1300  -  total flux cleaned = -0.000159032 Jy
! Component: 1350  -  total flux cleaned = -0.000233111 Jy
! Component: 1400  -  total flux cleaned = -0.000233101 Jy
! Component: 1450  -  total flux cleaned = -0.000269477 Jy
! Component: 1500  -  total flux cleaned = -0.000323402 Jy
! Component: 1550  -  total flux cleaned = -0.00035905 Jy
! Component: 1600  -  total flux cleaned = -0.000306269 Jy
! Component: 1650  -  total flux cleaned = -0.000323681 Jy
! Component: 1700  -  total flux cleaned = -0.000289045 Jy
! Component: 1750  -  total flux cleaned = -0.00034038 Jy
! Component: 1800  -  total flux cleaned = -0.000374032 Jy
! Component: 1850  -  total flux cleaned = -0.000323592 Jy
! Component: 1900  -  total flux cleaned = -0.000306762 Jy
! Component: 1950  -  total flux cleaned = -0.000306698 Jy
! Component: 2000  -  total flux cleaned = -0.000339514 Jy
! Component: 2050  -  total flux cleaned = -0.000339298 Jy
! Component: 2100  -  total flux cleaned = -0.000307014 Jy
! Component: 2150  -  total flux cleaned = -0.000338884 Jy
! Component: 2200  -  total flux cleaned = -0.000243596 Jy
! Component: 2250  -  total flux cleaned = -0.000227988 Jy
! Component: 2300  -  total flux cleaned = -0.000212569 Jy
! Component: 2350  -  total flux cleaned = -0.000197053 Jy
! Component: 2400  -  total flux cleaned = -0.000135673 Jy
! Component: 2450  -  total flux cleaned = -0.000120504 Jy
! Component: 2500  -  total flux cleaned = -0.000166139 Jy
! Component: 2550  -  total flux cleaned = -7.59233e-05 Jy
! Component: 2600  -  total flux cleaned = -7.60016e-05 Jy
! Component: 2650  -  total flux cleaned = -9.08875e-05 Jy
! Component: 2700  -  total flux cleaned = -1.72596e-05 Jy
! Component: 2750  -  total flux cleaned = -3.18446e-05 Jy
! Component: 2800  -  total flux cleaned = 2.62188e-05 Jy
! Component: 2850  -  total flux cleaned = 5.49131e-05 Jy
! Component: 2900  -  total flux cleaned = 0.000111959 Jy
! Component: 2950  -  total flux cleaned = 6.93053e-05 Jy
! Component: 3000  -  total flux cleaned = 0.000125951 Jy
! Component: 3050  -  total flux cleaned = 0.000154159 Jy
! Component: 3100  -  total flux cleaned = 0.000209916 Jy
! Component: 3150  -  total flux cleaned = 0.000251487 Jy
! Component: 3200  -  total flux cleaned = 0.000306566 Jy
! Component: 3250  -  total flux cleaned = 0.000333899 Jy
! Component: 3300  -  total flux cleaned = 0.000388331 Jy
! Component: 3350  -  total flux cleaned = 0.000415319 Jy
! Component: 3400  -  total flux cleaned = 0.000468965 Jy
! Component: 3450  -  total flux cleaned = 0.000535713 Jy
! Component: 3500  -  total flux cleaned = 0.000548868 Jy
! Component: 3550  -  total flux cleaned = 0.000614911 Jy
! Component: 3600  -  total flux cleaned = 0.00062789 Jy
! Component: 3650  -  total flux cleaned = 0.000666939 Jy
! Component: 3700  -  total flux cleaned = 0.000718734 Jy
! Component: 3750  -  total flux cleaned = 0.000731707 Jy
! Component: 3800  -  total flux cleaned = 0.000808501 Jy
! Component: 3850  -  total flux cleaned = 0.000821254 Jy
! Component: 3900  -  total flux cleaned = 0.000846674 Jy
! Component: 3950  -  total flux cleaned = 0.000909721 Jy
! Component: 4000  -  total flux cleaned = 0.000947295 Jy
! Component: 4050  -  total flux cleaned = 0.000996956 Jy
! Total flux subtracted in 4096 components = 0.0010217 Jy
! Clean residual min=-0.000695 max=0.000698 Jy/beam
! Clean residual mean=-0.000003 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.0424843 Jy
keep
! Adding 266 model components to the UV plane model.
! The established model now contains 325 components and 0.0424843 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv120_uvs/J1958-2052_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.862 x 7.515 at -1.272 degrees (North through East)
! Clean map  min=-0.0013773  max=0.04069 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv120_uvs/J1958-2052_S_map.fits
wmodel /scr/pima/rv120_uvs/J1958-2052_S_map.mod
! Writing 325 model components to file: /scr/pima/rv120_uvs/J1958-2052_S_map.mod
wobs   /scr/pima/rv120_uvs/J1958-2052_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv120_uvs/J1958-2052_S_uvs.fits
wwins  /scr/pima/rv120_uvs/J1958-2052_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv120_uvs/J1958-2052_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0406902 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000219018 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.61478 1.61478 3.22955 6.45911 12.9182 25.8364 51.6728
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.04 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  185.784 
quit
! Quitting program
! Log file /scr/pima/rv120_uvs/J1958-2052_S_dfm.log closed on Fri Dec 22 22:35:48 2017