! Started logfile: /scr/pima/rv120_uvs/J1127-1857_X_dfm.log on Fri Dec 22 22:41:47 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J1127-1857_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J1127-1857_X_uva.fits ! AN table 1: 27 integrations on 3 of 3 possible baselines. ! AN table 2: 4 integrations on 3 of 3 possible baselines. ! AN table 3: 14 integrations on 28 of 28 possible baselines. ! AN table 4: 3 integrations on 45 of 45 possible baselines. ! AN table 5: 10 integrations on 36 of 36 possible baselines. ! AN table 6: 19 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.53373 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3228 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1127-1857_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 44 telescope corrections were flagged in sub-array 5. ! A total of 90 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 44 telescope corrections were flagged in sub-array 5. ! A total of 90 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 44 telescope corrections were flagged in sub-array 5. ! A total of 90 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 44 telescope corrections were flagged in sub-array 5. ! A total of 90 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.322105Jy sigma=19.040703 ! Fit after self-cal, rms=0.224928Jy sigma=2.433203 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.35% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=0.8217 mas, bmaj=1.26 mas, bpa=15.03 degrees ! Estimated noise=1.49309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.66324 Jy ! Component: 100 - total flux cleaned = 0.826755 Jy ! Total flux subtracted in 100 components = 0.826755 Jy ! Clean residual min=-0.021380 max=0.066380 Jy/beam ! Clean residual mean=0.000045 rms=0.005304 Jy/beam ! Combined flux in latest and established models = 0.826755 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.826755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154609Jy sigma=1.953603 ! Fit after self-cal, rms=0.154634Jy sigma=1.952244 ! Inverting map ! Your choice of large map pixels excluded 3.35% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0678478 Jy ! Component: 100 - total flux cleaned = 0.0980546 Jy ! Total flux subtracted in 100 components = 0.0980546 Jy ! Clean residual min=-0.027208 max=0.035875 Jy/beam ! Clean residual mean=-0.000006 rms=0.003909 Jy/beam ! Combined flux in latest and established models = 0.92481 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.92481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128636Jy sigma=1.397668 ! Fit after self-cal, rms=0.128691Jy sigma=1.396822 ! Inverting map ! Your choice of large map pixels excluded 3.35% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Added new window around map position (0.6, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201483 Jy ! Component: 100 - total flux cleaned = 0.0178982 Jy ! Total flux subtracted in 100 components = 0.0178982 Jy ! Clean residual min=-0.024212 max=0.032524 Jy/beam ! Clean residual mean=-0.000015 rms=0.003593 Jy/beam ! Combined flux in latest and established models = 0.942708 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.942708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123605Jy sigma=1.321035 ! Fit after self-cal, rms=0.122464Jy sigma=1.306883 ! Inverting map ! Your choice of large map pixels excluded 3.35% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.35% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.008 mas, bmaj=1.563 mas, bpa=17.14 degrees ! Estimated noise=1.14776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686326 Jy ! Component: 100 - total flux cleaned = 0.00794266 Jy ! Component: 150 - total flux cleaned = 0.00838446 Jy ! Component: 200 - total flux cleaned = 0.00800133 Jy ! Total flux subtracted in 200 components = 0.00800133 Jy ! Clean residual min=-0.014621 max=0.012914 Jy/beam ! Clean residual mean=-0.000037 rms=0.002388 Jy/beam ! Combined flux in latest and established models = 0.950709 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.950709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118420Jy sigma=1.252744 ! Fit after self-cal, rms=0.118280Jy sigma=1.249796 ! Inverting map ! Your choice of large map pixels excluded 3.35% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.008 x 1.563 at 17.14 degrees (North through East) ! Clean map min=-0.01364 max=0.79477 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HH 1.01 HN 1.10 KP 1.02 ! LA 1.00 NL 0.97 PT 1.02 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.99 HN 0.97 KP 1.02 ! LA 1.01 MK 2.27 NL 0.96 OV 0.99 ! PT 1.00 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HN 1.05 KK 0.97 KP 1.02 ! LA 1.00 NL 0.97 OV 0.99 PT 0.99 ! SC 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.98 KK 1.01 KP 1.00 ! LA 1.00 NL 1.09 OV 0.99 PT 1.00 ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HH 1.00 HN 1.06 KP 1.01 ! LA 1.00 NL 0.98 PT 1.05 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 HN 0.93 KP 1.00 ! LA 1.00 MK 2.18 NL 0.96 OV 1.01 ! PT 1.00 SC 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HN 1.03 KK 0.94 KP 1.00 ! LA 1.00 NL 0.95 OV 1.01 PT 1.00 ! SC 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.98 KK 0.96 KP 0.99 ! LA 1.00 NL 1.06 OV 1.00 PT 0.99 ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HH 1.03 HN 1.12 KP 1.01 ! LA 1.02 NL 0.97 PT 1.03 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 HN 0.97 KP 1.00 ! LA 0.99 MK 2.38 NL 0.96 OV 0.98 ! PT 0.98 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HN 1.04 KK 0.91 KP 0.99 ! LA 1.00 NL 0.97 OV 0.97 PT 1.00 ! SC 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 0.98 KK 0.96 KP 0.99 ! LA 1.00 NL 1.08 OV 0.99 PT 0.99 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HH 1.12 HN 1.16 KP 1.01 ! LA 0.99 NL 0.97 PT 1.02 SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.97 HN 0.96 KP 0.99 ! LA 1.00 MK 2.37 NL 0.97 OV 0.99 ! PT 0.97 SC 1.04 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.97 HN 1.00 KK 0.98 KP 0.99 ! LA 1.00 NL 0.97 OV 0.97 PT 1.01 ! SC 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 0.98 KK 0.98 KP 0.97 ! LA 0.98 NL 1.08 OV 0.99 PT 0.98 ! ! ! Fit before self-cal, rms=0.118280Jy sigma=1.249796 ! Fit after self-cal, rms=0.099002Jy sigma=0.953439 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.058 mas, bmaj=2.208 mas, bpa=11.71 degrees ! Estimated noise=1.1913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147059 Jy ! Component: 100 - total flux cleaned = -0.00223185 Jy ! Component: 150 - total flux cleaned = -0.00288683 Jy ! Component: 200 - total flux cleaned = -0.00307847 Jy ! Total flux subtracted in 200 components = -0.00307847 Jy ! Clean residual min=-0.010064 max=0.006810 Jy/beam ! Clean residual mean=-0.000006 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.947631 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.947631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097487Jy sigma=0.938165 ! Fit after self-cal, rms=0.097561Jy sigma=0.937360 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097561Jy sigma=0.937360 ! Fit after self-cal, rms=0.095256Jy sigma=0.892218 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.057 mas, bmaj=2.206 mas, bpa=11.84 degrees ! Estimated noise=1.18877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000939409 Jy ! Component: 100 - total flux cleaned = -0.00129873 Jy ! Component: 150 - total flux cleaned = -0.00145354 Jy ! Component: 200 - total flux cleaned = -0.00160398 Jy ! Total flux subtracted in 200 components = -0.00160398 Jy ! Clean residual min=-0.007253 max=0.005724 Jy/beam ! Clean residual mean=-0.000000 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.946027 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.946027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094473Jy sigma=0.884118 ! Fit after self-cal, rms=0.094437Jy sigma=0.883636 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.24346e-05 Jy ! Component: 100 - total flux cleaned = -0.000113317 Jy ! Component: 150 - total flux cleaned = -0.000113287 Jy ! Component: 200 - total flux cleaned = -0.000112932 Jy ! Total flux subtracted in 200 components = -0.000112932 Jy ! Clean residual min=-0.006854 max=0.005617 Jy/beam ! Clean residual mean=-0.000000 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.945914 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.945914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093938Jy sigma=0.878814 ! Fit after self-cal, rms=0.093931Jy sigma=0.878601 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093931Jy sigma=0.878601 ! Fit after self-cal, rms=0.092308Jy sigma=0.855664 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.056 mas, bmaj=2.208 mas, bpa=11.83 degrees ! Estimated noise=1.18781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000534976 Jy ! Component: 100 - total flux cleaned = -0.000533017 Jy ! Component: 150 - total flux cleaned = -0.000539714 Jy ! Component: 200 - total flux cleaned = -0.000549818 Jy ! Total flux subtracted in 200 components = -0.000549818 Jy ! Clean residual min=-0.006328 max=0.005042 Jy/beam ! Clean residual mean=-0.000001 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.945364 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.945364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091903Jy sigma=0.850993 ! Fit after self-cal, rms=0.091895Jy sigma=0.850737 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118987 Jy ! Component: 100 - total flux cleaned = -0.000230635 Jy ! Component: 150 - total flux cleaned = -0.00023023 Jy ! Component: 200 - total flux cleaned = -0.000231005 Jy ! Total flux subtracted in 200 components = -0.000231005 Jy ! Clean residual min=-0.006097 max=0.004971 Jy/beam ! Clean residual mean=-0.000001 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.945133 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.945133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091589Jy sigma=0.847770 ! Fit after self-cal, rms=0.091587Jy sigma=0.847627 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091587Jy sigma=0.847627 ! Fit after self-cal, rms=0.091852Jy sigma=0.847119 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=2.446 mas, bmaj=4.335 mas, bpa=4.211 degrees ! Estimated noise=1.30593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159686 Jy ! Component: 100 - total flux cleaned = -0.00178099 Jy ! Component: 150 - total flux cleaned = -0.00184549 Jy ! Component: 200 - total flux cleaned = -0.00190732 Jy ! Total flux subtracted in 200 components = -0.00190732 Jy ! Clean residual min=-0.003981 max=0.003653 Jy/beam ! Clean residual mean=0.000001 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.943226 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 69 components and 0.943226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091796Jy sigma=0.846173 ! Fit after self-cal, rms=0.091773Jy sigma=0.846045 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240364 Jy ! Component: 100 - total flux cleaned = -0.00030755 Jy ! Component: 150 - total flux cleaned = -0.000401732 Jy ! Component: 200 - total flux cleaned = -0.000460347 Jy ! Total flux subtracted in 200 components = -0.000460347 Jy ! Clean residual min=-0.003970 max=0.003607 Jy/beam ! Clean residual mean=0.000001 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.942765 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 70 components and 0.942765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091724Jy sigma=0.845269 ! Fit after self-cal, rms=0.091701Jy sigma=0.845180 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.055 mas, bmaj=2.207 mas, bpa=11.89 degrees ! Estimated noise=1.18708 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 2.207 at 11.89 degrees (North through East) ! Clean map min=-0.0038875 max=0.84535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091701Jy sigma=0.845180 ! Fit after self-cal, rms=0.087574Jy sigma=0.768065 ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.056 mas, bmaj=2.209 mas, bpa=11.92 degrees ! Estimated noise=1.1862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000776789 Jy ! Component: 100 - total flux cleaned = -0.000775287 Jy ! Component: 150 - total flux cleaned = -0.000870843 Jy ! Component: 200 - total flux cleaned = -0.00087269 Jy ! Total flux subtracted in 200 components = -0.00087269 Jy ! Clean residual min=-0.005543 max=0.004957 Jy/beam ! Clean residual mean=0.000001 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.941893 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 0.941892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087297Jy sigma=0.764961 ! Fit after self-cal, rms=0.087293Jy sigma=0.764795 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.36663e-05 Jy ! Component: 100 - total flux cleaned = -9.41608e-05 Jy ! Component: 150 - total flux cleaned = -9.56756e-05 Jy ! Component: 200 - total flux cleaned = -9.9216e-05 Jy ! Total flux subtracted in 200 components = -9.9216e-05 Jy ! Clean residual min=-0.005400 max=0.004915 Jy/beam ! Clean residual mean=0.000001 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.941793 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.941793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087062Jy sigma=0.762724 ! Fit after self-cal, rms=0.087064Jy sigma=0.762598 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087064Jy sigma=0.762598 ! Fit after self-cal, rms=0.087315Jy sigma=0.762319 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=0.8482 mas, bmaj=1.842 mas, bpa=10.95 degrees ! Estimated noise=1.55588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.676372 Jy ! Component: 100 - total flux cleaned = 0.827679 Jy ! Component: 150 - total flux cleaned = 0.879501 Jy ! Component: 200 - total flux cleaned = 0.90519 Jy ! Total flux subtracted in 200 components = 0.90519 Jy ! Clean residual min=-0.008389 max=0.013524 Jy/beam ! Clean residual mean=0.000018 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.90519 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.90519 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.055 mas, bmaj=2.208 mas, bpa=11.97 degrees ! Estimated noise=1.18565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176801 Jy ! Component: 100 - total flux cleaned = 0.0269283 Jy ! Component: 150 - total flux cleaned = 0.0318328 Jy ! Component: 200 - total flux cleaned = 0.0328129 Jy ! Total flux subtracted in 200 components = 0.0328129 Jy ! Clean residual min=-0.004273 max=0.004777 Jy/beam ! Clean residual mean=0.000004 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.938003 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.938003 Jy ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Added new window around map position (-0.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187689 Jy ! Component: 100 - total flux cleaned = 0.00204393 Jy ! Component: 150 - total flux cleaned = 0.00220039 Jy ! Component: 200 - total flux cleaned = 0.00248718 Jy ! Total flux subtracted in 200 components = 0.00248718 Jy ! Clean residual min=-0.004238 max=0.004517 Jy/beam ! Clean residual mean=0.000001 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.94049 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.94049 Jy ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Added new window around map position (31.2, -45.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248613 Jy ! Component: 100 - total flux cleaned = 0.00262333 Jy ! Component: 150 - total flux cleaned = 0.00287882 Jy ! Component: 200 - total flux cleaned = 0.00287814 Jy ! Total flux subtracted in 200 components = 0.00287814 Jy ! Clean residual min=-0.004261 max=0.004462 Jy/beam ! Clean residual mean=-0.000001 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.943368 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.943368 Jy ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Added new window around map position (-14.6, -30.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287324 Jy ! Component: 100 - total flux cleaned = 0.00323523 Jy ! Component: 150 - total flux cleaned = 0.00335085 Jy ! Component: 200 - total flux cleaned = 0.00357347 Jy ! Total flux subtracted in 200 components = 0.00357347 Jy ! Clean residual min=-0.004150 max=0.004248 Jy/beam ! Clean residual mean=-0.000001 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.946942 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 63 components and 0.946942 Jy ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Added new window around map position (-23, -45.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366966 Jy ! Component: 100 - total flux cleaned = 0.00513271 Jy ! Component: 150 - total flux cleaned = 0.00544897 Jy ! Component: 200 - total flux cleaned = 0.00565303 Jy ! Total flux subtracted in 200 components = 0.00565303 Jy ! Clean residual min=-0.004040 max=0.003936 Jy/beam ! Clean residual mean=-0.000006 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.952595 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 78 components and 0.952595 Jy ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=2.447 mas, bmaj=4.338 mas, bpa=4.228 degrees ! Estimated noise=1.3039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000618159 Jy ! Component: 100 - total flux cleaned = -0.00106213 Jy ! Component: 150 - total flux cleaned = -0.00110876 Jy ! Component: 200 - total flux cleaned = -0.00106741 Jy ! Total flux subtracted in 200 components = -0.00106741 Jy ! Clean residual min=-0.003672 max=0.003367 Jy/beam ! Clean residual mean=-0.000007 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.951527 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.42785e-06 Jy ! Component: 100 - total flux cleaned = -7.35929e-05 Jy ! Component: 150 - total flux cleaned = -0.000106171 Jy ! Component: 200 - total flux cleaned = -4.35154e-05 Jy ! Total flux subtracted in 200 components = -4.35154e-05 Jy ! Clean residual min=-0.003666 max=0.003370 Jy/beam ! Clean residual mean=-0.000008 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.951484 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.951484 Jy ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! Estimated beam: bmin=1.055 mas, bmaj=2.208 mas, bpa=11.97 degrees ! Estimated noise=1.18565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000540147 Jy ! Component: 100 - total flux cleaned = 0.000740613 Jy ! Component: 150 - total flux cleaned = 0.000933638 Jy ! Component: 200 - total flux cleaned = 0.000937081 Jy ! Total flux subtracted in 200 components = 0.000937081 Jy ! Clean residual min=-0.003895 max=0.003803 Jy/beam ! Clean residual mean=-0.000006 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.952421 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 104 components and 0.952421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088793Jy sigma=0.748252 ! Fit after self-cal, rms=0.088601Jy sigma=0.744449 wmodel J1127-1857_X_map.mod ! Writing 104 model components to file: J1127-1857_X_map.mod wobs J1127-1857_X_uvs.fits ! Writing UV FITS file: J1127-1857_X_uvs.fits wwins J1127-1857_X_map.win ! wwins: Wrote 7 windows to J1127-1857_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138349 Jy ! Component: 100 - total flux cleaned = -0.00165739 Jy ! Component: 150 - total flux cleaned = -0.00185784 Jy ! Component: 200 - total flux cleaned = -0.00198729 Jy ! Component: 250 - total flux cleaned = -0.00179627 Jy ! Component: 300 - total flux cleaned = -0.00173275 Jy ! Component: 350 - total flux cleaned = -0.0015485 Jy ! Component: 400 - total flux cleaned = -0.00148867 Jy ! Component: 450 - total flux cleaned = -0.00154863 Jy ! Component: 500 - total flux cleaned = -0.00154905 Jy ! Component: 550 - total flux cleaned = -0.00155003 Jy ! Component: 600 - total flux cleaned = -0.00183531 Jy ! Component: 650 - total flux cleaned = -0.00183496 Jy ! Component: 700 - total flux cleaned = -0.00189116 Jy ! Component: 750 - total flux cleaned = -0.00205666 Jy ! Component: 800 - total flux cleaned = -0.00194623 Jy ! Component: 850 - total flux cleaned = -0.00200026 Jy ! Component: 900 - total flux cleaned = -0.0018931 Jy ! Component: 950 - total flux cleaned = -0.00194634 Jy ! Component: 1000 - total flux cleaned = -0.00210324 Jy ! Component: 1050 - total flux cleaned = -0.00184254 Jy ! Component: 1100 - total flux cleaned = -0.00199715 Jy ! Component: 1150 - total flux cleaned = -0.00174122 Jy ! Component: 1200 - total flux cleaned = -0.00179254 Jy ! Component: 1250 - total flux cleaned = -0.00194327 Jy ! Component: 1300 - total flux cleaned = -0.00164342 Jy ! Component: 1350 - total flux cleaned = -0.00164352 Jy ! Component: 1400 - total flux cleaned = -0.00174208 Jy ! Component: 1450 - total flux cleaned = -0.00174166 Jy ! Component: 1500 - total flux cleaned = -0.00164525 Jy ! Component: 1550 - total flux cleaned = -0.0015978 Jy ! Component: 1600 - total flux cleaned = -0.001979 Jy ! Component: 1650 - total flux cleaned = -0.00188391 Jy ! Component: 1700 - total flux cleaned = -0.00164863 Jy ! Component: 1750 - total flux cleaned = -0.00174228 Jy ! Component: 1800 - total flux cleaned = -0.00188094 Jy ! Component: 1850 - total flux cleaned = -0.00183471 Jy ! Component: 1900 - total flux cleaned = -0.00165215 Jy ! Component: 1950 - total flux cleaned = -0.00183384 Jy ! Component: 2000 - total flux cleaned = -0.00169817 Jy ! Component: 2050 - total flux cleaned = -0.00151859 Jy ! Component: 2100 - total flux cleaned = -0.00165279 Jy ! Component: 2150 - total flux cleaned = -0.00165263 Jy ! Component: 2200 - total flux cleaned = -0.00182906 Jy ! Component: 2250 - total flux cleaned = -0.00174128 Jy ! Component: 2300 - total flux cleaned = -0.00182841 Jy ! Component: 2350 - total flux cleaned = -0.00174158 Jy ! Component: 2400 - total flux cleaned = -0.00195725 Jy ! Component: 2450 - total flux cleaned = -0.00195684 Jy ! Component: 2500 - total flux cleaned = -0.00191415 Jy ! Component: 2550 - total flux cleaned = -0.00178647 Jy ! Component: 2600 - total flux cleaned = -0.00187149 Jy ! Component: 2650 - total flux cleaned = -0.00191337 Jy ! Component: 2700 - total flux cleaned = -0.00203877 Jy ! Component: 2750 - total flux cleaned = -0.00187236 Jy ! Component: 2800 - total flux cleaned = -0.00191399 Jy ! Component: 2850 - total flux cleaned = -0.00211983 Jy ! Component: 2900 - total flux cleaned = -0.00195586 Jy ! Component: 2950 - total flux cleaned = -0.00207835 Jy ! Component: 3000 - total flux cleaned = -0.00187524 Jy ! Component: 3050 - total flux cleaned = -0.00183491 Jy ! Component: 3100 - total flux cleaned = -0.00191565 Jy ! Component: 3150 - total flux cleaned = -0.00171513 Jy ! Component: 3200 - total flux cleaned = -0.00175523 Jy ! Component: 3250 - total flux cleaned = -0.0016757 Jy ! Component: 3300 - total flux cleaned = -0.00159644 Jy ! Component: 3350 - total flux cleaned = -0.00163561 Jy ! Component: 3400 - total flux cleaned = -0.00155707 Jy ! Component: 3450 - total flux cleaned = -0.00136164 Jy ! Component: 3500 - total flux cleaned = -0.00140041 Jy ! Component: 3550 - total flux cleaned = -0.0013618 Jy ! Component: 3600 - total flux cleaned = -0.00147756 Jy ! Component: 3650 - total flux cleaned = -0.00120872 Jy ! Component: 3700 - total flux cleaned = -0.00132359 Jy ! Component: 3750 - total flux cleaned = -0.00120911 Jy ! Component: 3800 - total flux cleaned = -0.00105687 Jy ! Component: 3850 - total flux cleaned = -0.000943604 Jy ! Component: 3900 - total flux cleaned = -0.000943508 Jy ! Component: 3950 - total flux cleaned = -0.000905903 Jy ! Component: 4000 - total flux cleaned = -0.000943104 Jy ! Component: 4050 - total flux cleaned = -0.000793934 Jy ! Total flux subtracted in 4096 components = -0.000868242 Jy ! Clean residual min=-0.002283 max=0.002339 Jy/beam ! Clean residual mean=-0.000005 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.951553 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 375 components and 0.951553 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J1127-1857_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 2.208 at 11.97 degrees (North through East) ! Clean map min=-0.0038629 max=0.8541 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J1127-1857_X_map.fits wmodel /scr/pima/rv120_uvs/J1127-1857_X_map.mod ! Writing 375 model components to file: /scr/pima/rv120_uvs/J1127-1857_X_map.mod wobs /scr/pima/rv120_uvs/J1127-1857_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J1127-1857_X_uvs.fits wwins /scr/pima/rv120_uvs/J1127-1857_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv120_uvs/J1127-1857_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.854101 invert ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1644 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000623092 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.218859 0.218859 0.437717 0.875435 1.75087 3.50174 7.00348 14.007 28.0139 56.0278 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.854 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1370.75 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J1127-1857_X_dfm.log closed on Fri Dec 22 22:41:52 2017