! Started logfile: /scr/pima/rv120_uvs/J1055+0205_X_dfm.log on Fri Dec 22 22:41:33 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J1055+0205_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J1055+0205_X_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.868085 visibilities/baseline/integration-bin. ! Found source: J1055+0205 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7344 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1055+0205_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008065Jy sigma=21.730035 ! Fit after self-cal, rms=0.911599Jy sigma=19.643394 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.892 mas, bmaj=1.988 mas, bpa=11.06 degrees ! Estimated noise=0.745448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673199 Jy ! Component: 100 - total flux cleaned = 0.0835441 Jy ! Total flux subtracted in 100 components = 0.0835441 Jy ! Clean residual min=-0.004680 max=0.006165 Jy/beam ! Clean residual mean=-0.000000 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.0835441 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0835441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057629Jy sigma=0.972980 ! Fit after self-cal, rms=0.057549Jy sigma=0.972069 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679953 Jy ! Component: 100 - total flux cleaned = 0.00877191 Jy ! Total flux subtracted in 100 components = 0.00877191 Jy ! Clean residual min=-0.004663 max=0.005119 Jy/beam ! Clean residual mean=-0.000000 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.092316 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.092316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056595Jy sigma=0.952923 ! Fit after self-cal, rms=0.056603Jy sigma=0.952750 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.123 mas, bmaj=2.364 mas, bpa=10.61 degrees ! Estimated noise=0.412026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441723 Jy ! Component: 100 - total flux cleaned = 0.00527924 Jy ! Component: 150 - total flux cleaned = 0.00538571 Jy ! Component: 200 - total flux cleaned = 0.00538929 Jy ! Total flux subtracted in 200 components = 0.00538929 Jy ! Clean residual min=-0.002579 max=0.002944 Jy/beam ! Clean residual mean=-0.000001 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0977053 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 0.0977053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056028Jy sigma=0.940831 ! Fit after self-cal, rms=0.056008Jy sigma=0.940413 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.123 x 2.364 at 10.61 degrees (North through East) ! Clean map min=-0.0024671 max=0.090414 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.81 KP 1.02 ! LA 1.00 MK 1.30 NL 0.99 OV 1.00 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.85 KP 1.03 ! LA 1.01 MK 1.39 NL 1.01 OV 1.01 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.81 KP 1.03 ! LA 1.00 MK 1.37 NL 1.00 OV 1.01 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.77 KP 1.04 ! LA 0.98 MK 1.51 NL 0.99 OV 0.96 ! PT 0.93 SC 1.02 ! ! ! Fit before self-cal, rms=0.056008Jy sigma=0.940413 ! Fit after self-cal, rms=0.057580Jy sigma=0.923765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.132 mas, bmaj=2.405 mas, bpa=11.25 degrees ! Estimated noise=0.407175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169429 Jy ! Component: 100 - total flux cleaned = 0.00193517 Jy ! Component: 150 - total flux cleaned = 0.00234562 Jy ! Component: 200 - total flux cleaned = 0.00269932 Jy ! Total flux subtracted in 200 components = 0.00269932 Jy ! Clean residual min=-0.001640 max=0.001727 Jy/beam ! Clean residual mean=-0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.100405 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.100405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057498Jy sigma=0.921285 ! Fit after self-cal, rms=0.057521Jy sigma=0.920965 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057521Jy sigma=0.920965 ! Fit after self-cal, rms=0.057957Jy sigma=0.914004 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.138 mas, bmaj=2.413 mas, bpa=11.49 degrees ! Estimated noise=0.407667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853093 Jy ! Component: 100 - total flux cleaned = 0.000807159 Jy ! Component: 150 - total flux cleaned = 0.000767181 Jy ! Component: 200 - total flux cleaned = 0.000767429 Jy ! Total flux subtracted in 200 components = 0.000767429 Jy ! Clean residual min=-0.001300 max=0.001460 Jy/beam ! Clean residual mean=-0.000000 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.101172 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 73 components and 0.101172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057933Jy sigma=0.913368 ! Fit after self-cal, rms=0.057935Jy sigma=0.913281 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125459 Jy ! Component: 100 - total flux cleaned = 0.0013779 Jy ! Component: 150 - total flux cleaned = 0.00152661 Jy ! Component: 200 - total flux cleaned = 0.00163424 Jy ! Total flux subtracted in 200 components = 0.00163424 Jy ! Clean residual min=-0.001288 max=0.001261 Jy/beam ! Clean residual mean=-0.000000 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.102806 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.102806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057889Jy sigma=0.912383 ! Fit after self-cal, rms=0.057891Jy sigma=0.912340 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057891Jy sigma=0.912340 ! Fit after self-cal, rms=0.058186Jy sigma=0.912242 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.14 mas, bmaj=2.416 mas, bpa=11.51 degrees ! Estimated noise=0.40748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413543 Jy ! Component: 100 - total flux cleaned = 0.000555814 Jy ! Component: 150 - total flux cleaned = 0.00062849 Jy ! Component: 200 - total flux cleaned = 0.000661393 Jy ! Total flux subtracted in 200 components = 0.000661393 Jy ! Clean residual min=-0.001270 max=0.001238 Jy/beam ! Clean residual mean=-0.000001 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.103468 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.103468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058169Jy sigma=0.911979 ! Fit after self-cal, rms=0.058174Jy sigma=0.911969 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.45262e-05 Jy ! Component: 100 - total flux cleaned = 0.000146815 Jy ! Component: 150 - total flux cleaned = 0.000191246 Jy ! Component: 200 - total flux cleaned = 0.000247948 Jy ! Total flux subtracted in 200 components = 0.000247948 Jy ! Clean residual min=-0.001264 max=0.001229 Jy/beam ! Clean residual mean=-0.000001 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.103716 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 108 components and 0.103716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058163Jy sigma=0.911840 ! Fit after self-cal, rms=0.058165Jy sigma=0.911837 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058165Jy sigma=0.911837 ! Fit after self-cal, rms=0.058266Jy sigma=0.911815 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.33 mas, bpa=0.7608 degrees ! Estimated noise=0.45077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415615 Jy ! Component: 100 - total flux cleaned = 0.000575355 Jy ! Component: 150 - total flux cleaned = 0.000662953 Jy ! Component: 200 - total flux cleaned = 0.000750944 Jy ! Total flux subtracted in 200 components = 0.000750944 Jy ! Clean residual min=-0.001090 max=0.001299 Jy/beam ! Clean residual mean=-0.000001 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.104467 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 120 components and 0.104467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058266Jy sigma=0.911776 ! Fit after self-cal, rms=0.058264Jy sigma=0.911765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011719 Jy ! Component: 100 - total flux cleaned = 0.00023356 Jy ! Component: 150 - total flux cleaned = 0.00028221 Jy ! Component: 200 - total flux cleaned = 0.000327853 Jy ! Total flux subtracted in 200 components = 0.000327853 Jy ! Clean residual min=-0.001077 max=0.001316 Jy/beam ! Clean residual mean=-0.000001 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.104794 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 126 components and 0.104794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058265Jy sigma=0.911767 ! Fit after self-cal, rms=0.058264Jy sigma=0.911762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.14 mas, bmaj=2.417 mas, bpa=11.52 degrees ! Estimated noise=0.407418 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.14 x 2.417 at 11.52 degrees (North through East) ! Clean map min=-0.0013429 max=0.089238 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9131 mas, bmaj=2.071 mas, bpa=12.53 degrees ! Estimated noise=0.746563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.067332 Jy ! Component: 100 - total flux cleaned = 0.0826073 Jy ! Component: 150 - total flux cleaned = 0.0886073 Jy ! Component: 200 - total flux cleaned = 0.0922974 Jy ! Total flux subtracted in 200 components = 0.0922974 Jy ! Clean residual min=-0.003058 max=0.003000 Jy/beam ! Clean residual mean=0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0922974 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0922974 Jy ! Inverting map and beam ! Estimated beam: bmin=1.14 mas, bmaj=2.417 mas, bpa=11.52 degrees ! Estimated noise=0.407418 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388294 Jy ! Component: 100 - total flux cleaned = 0.00620435 Jy ! Component: 150 - total flux cleaned = 0.00789705 Jy ! Component: 200 - total flux cleaned = 0.00891907 Jy ! Total flux subtracted in 200 components = 0.00891907 Jy ! Clean residual min=-0.001369 max=0.001399 Jy/beam ! Clean residual mean=-0.000000 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.101216 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 48 components and 0.101216 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.33 mas, bpa=0.7608 degrees ! Estimated noise=0.45077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145746 Jy ! Component: 100 - total flux cleaned = 0.00239465 Jy ! Component: 150 - total flux cleaned = 0.0027701 Jy ! Component: 200 - total flux cleaned = 0.00305767 Jy ! Total flux subtracted in 200 components = 0.00305767 Jy ! Clean residual min=-0.001249 max=0.001131 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.104274 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245835 Jy ! Component: 100 - total flux cleaned = 0.000457056 Jy ! Component: 150 - total flux cleaned = 0.000605455 Jy ! Component: 200 - total flux cleaned = 0.000705555 Jy ! Total flux subtracted in 200 components = 0.000705555 Jy ! Clean residual min=-0.001183 max=0.001219 Jy/beam ! Clean residual mean=-0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.10498 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 88 components and 0.10498 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.14 mas, bmaj=2.417 mas, bpa=11.52 degrees ! Estimated noise=0.407418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40406e-05 Jy ! Component: 100 - total flux cleaned = 1.32225e-05 Jy ! Component: 150 - total flux cleaned = 6.01203e-05 Jy ! Component: 200 - total flux cleaned = 8.01345e-05 Jy ! Total flux subtracted in 200 components = 8.01345e-05 Jy ! Clean residual min=-0.001343 max=0.001306 Jy/beam ! Clean residual mean=-0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.10506 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.10506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058321Jy sigma=0.912384 ! Fit after self-cal, rms=0.058302Jy sigma=0.912290 wmodel J1055+0205_X_map.mod ! Writing 110 model components to file: J1055+0205_X_map.mod wobs J1055+0205_X_uvs.fits ! Writing UV FITS file: J1055+0205_X_uvs.fits wwins J1055+0205_X_map.win ! wwins: Wrote 3 windows to J1055+0205_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.48779e-05 Jy ! Component: 100 - total flux cleaned = 0.000165138 Jy ! Component: 150 - total flux cleaned = 1.15407e-05 Jy ! Component: 200 - total flux cleaned = -0.000157639 Jy ! Component: 250 - total flux cleaned = -0.000301113 Jy ! Component: 300 - total flux cleaned = -0.000461427 Jy ! Component: 350 - total flux cleaned = -0.000637764 Jy ! Component: 400 - total flux cleaned = -0.000752649 Jy ! Component: 450 - total flux cleaned = -0.000940204 Jy ! Component: 500 - total flux cleaned = -0.00106848 Jy ! Component: 550 - total flux cleaned = -0.00117665 Jy ! Component: 600 - total flux cleaned = -0.00133637 Jy ! Component: 650 - total flux cleaned = -0.00144095 Jy ! Component: 700 - total flux cleaned = -0.00156119 Jy ! Component: 750 - total flux cleaned = -0.00166254 Jy ! Component: 800 - total flux cleaned = -0.00181212 Jy ! Component: 850 - total flux cleaned = -0.00186128 Jy ! Component: 900 - total flux cleaned = -0.00192624 Jy ! Component: 950 - total flux cleaned = -0.00200584 Jy ! Component: 1000 - total flux cleaned = -0.00198978 Jy ! Component: 1050 - total flux cleaned = -0.00203642 Jy ! Component: 1100 - total flux cleaned = -0.00206746 Jy ! Component: 1150 - total flux cleaned = -0.00208276 Jy ! Component: 1200 - total flux cleaned = -0.0021431 Jy ! Component: 1250 - total flux cleaned = -0.00221765 Jy ! Component: 1300 - total flux cleaned = -0.00226182 Jy ! Component: 1350 - total flux cleaned = -0.00230568 Jy ! Component: 1400 - total flux cleaned = -0.00237801 Jy ! Component: 1450 - total flux cleaned = -0.00239216 Jy ! Component: 1500 - total flux cleaned = -0.0024346 Jy ! Component: 1550 - total flux cleaned = -0.00249079 Jy ! Component: 1600 - total flux cleaned = -0.002463 Jy ! Component: 1650 - total flux cleaned = -0.00247694 Jy ! Component: 1700 - total flux cleaned = -0.00253154 Jy ! Component: 1750 - total flux cleaned = -0.00254509 Jy ! Component: 1800 - total flux cleaned = -0.00257222 Jy ! Component: 1850 - total flux cleaned = -0.0026389 Jy ! Component: 1900 - total flux cleaned = -0.00271821 Jy ! Component: 1950 - total flux cleaned = -0.00280997 Jy ! Component: 2000 - total flux cleaned = -0.00283608 Jy ! Component: 2050 - total flux cleaned = -0.00292648 Jy ! Component: 2100 - total flux cleaned = -0.00297774 Jy ! Component: 2150 - total flux cleaned = -0.0029777 Jy ! Component: 2200 - total flux cleaned = -0.00306635 Jy ! Component: 2250 - total flux cleaned = -0.00309145 Jy ! Component: 2300 - total flux cleaned = -0.00305401 Jy ! Component: 2350 - total flux cleaned = -0.00317793 Jy ! Component: 2400 - total flux cleaned = -0.00325167 Jy ! Component: 2450 - total flux cleaned = -0.00326381 Jy ! Component: 2500 - total flux cleaned = -0.00327593 Jy ! Component: 2550 - total flux cleaned = -0.00334819 Jy ! Component: 2600 - total flux cleaned = -0.0033362 Jy ! Component: 2650 - total flux cleaned = -0.00337176 Jy ! Component: 2700 - total flux cleaned = -0.00340715 Jy ! Component: 2750 - total flux cleaned = -0.00338364 Jy ! Component: 2800 - total flux cleaned = -0.00344187 Jy ! Component: 2850 - total flux cleaned = -0.00344194 Jy ! Component: 2900 - total flux cleaned = -0.00349952 Jy ! Component: 2950 - total flux cleaned = -0.0035338 Jy ! Component: 3000 - total flux cleaned = -0.00354509 Jy ! Component: 3050 - total flux cleaned = -0.00354516 Jy ! Component: 3100 - total flux cleaned = -0.00355644 Jy ! Component: 3150 - total flux cleaned = -0.00361213 Jy ! Component: 3200 - total flux cleaned = -0.0036564 Jy ! Component: 3250 - total flux cleaned = -0.0036343 Jy ! Component: 3300 - total flux cleaned = -0.00370011 Jy ! Component: 3350 - total flux cleaned = -0.00375452 Jy ! Component: 3400 - total flux cleaned = -0.00375468 Jy ! Component: 3450 - total flux cleaned = -0.00378706 Jy ! Component: 3500 - total flux cleaned = -0.00381918 Jy ! Component: 3550 - total flux cleaned = -0.00382983 Jy ! Component: 3600 - total flux cleaned = -0.00390413 Jy ! Component: 3650 - total flux cleaned = -0.00390416 Jy ! Component: 3700 - total flux cleaned = -0.0039356 Jy ! Component: 3750 - total flux cleaned = -0.00398781 Jy ! Component: 3800 - total flux cleaned = -0.00398772 Jy ! Component: 3850 - total flux cleaned = -0.00396697 Jy ! Component: 3900 - total flux cleaned = -0.00396697 Jy ! Component: 3950 - total flux cleaned = -0.00397719 Jy ! Component: 4000 - total flux cleaned = -0.00399751 Jy ! Component: 4050 - total flux cleaned = -0.00394672 Jy ! Total flux subtracted in 4096 components = -0.00395684 Jy ! Clean residual min=-0.000642 max=0.000673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.101103 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 375 components and 0.101103 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J1055+0205_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.14 x 2.417 at 11.52 degrees (North through East) ! Clean map min=-0.0010717 max=0.088856 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J1055+0205_X_map.fits wmodel /scr/pima/rv120_uvs/J1055+0205_X_map.mod ! Writing 375 model components to file: /scr/pima/rv120_uvs/J1055+0205_X_map.mod wobs /scr/pima/rv120_uvs/J1055+0205_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J1055+0205_X_uvs.fits wwins /scr/pima/rv120_uvs/J1055+0205_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv120_uvs/J1055+0205_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0888559 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172871 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.583655 0.583655 1.16731 2.33462 4.66924 9.33847 18.6769 37.3539 74.7078 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.088 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 514.002 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J1055+0205_X_dfm.log closed on Fri Dec 22 22:41:37 2017