! Started logfile: /scr/pima/rv120_uvs/J1016+0513_X_dfm.log on Fri Dec 22 22:41:18 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J1016+0513_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J1016+0513_X_uva.fits ! AN table 1: 25 integrations on 3 of 3 possible baselines. ! AN table 2: 133 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.579973 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 17144 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1016+0513_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 430 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 430 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 430 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 430 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.006397Jy sigma=21.480797 ! Fit after self-cal, rms=0.892118Jy sigma=18.956779 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8103 mas, bmaj=1.937 mas, bpa=-0.5211 degrees ! Estimated noise=0.497216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0848232 Jy ! Component: 100 - total flux cleaned = 0.104353 Jy ! Total flux subtracted in 100 components = 0.104353 Jy ! Clean residual min=-0.003369 max=0.007220 Jy/beam ! Clean residual mean=-0.000002 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.104353 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.104353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062327Jy sigma=0.994435 ! Fit after self-cal, rms=0.062135Jy sigma=0.993193 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785433 Jy ! Component: 100 - total flux cleaned = 0.0125183 Jy ! Total flux subtracted in 100 components = 0.0125183 Jy ! Clean residual min=-0.003410 max=0.003878 Jy/beam ! Clean residual mean=-0.000000 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.116872 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.116872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061129Jy sigma=0.954351 ! Fit after self-cal, rms=0.061127Jy sigma=0.954175 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9983 mas, bmaj=2.233 mas, bpa=1.107 degrees ! Estimated noise=0.277222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414763 Jy ! Component: 100 - total flux cleaned = 0.00573922 Jy ! Component: 150 - total flux cleaned = 0.00672945 Jy ! Component: 200 - total flux cleaned = 0.00756048 Jy ! Total flux subtracted in 200 components = 0.00756048 Jy ! Clean residual min=-0.002668 max=0.002849 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.124432 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 53 components and 0.124432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060836Jy sigma=0.944713 ! Fit after self-cal, rms=0.060805Jy sigma=0.944307 ! Inverting map ! Added new window around map position (-6.8, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162118 Jy ! Component: 100 - total flux cleaned = 0.00162087 Jy ! Component: 150 - total flux cleaned = 0.00174661 Jy ! Component: 200 - total flux cleaned = 0.00186452 Jy ! Total flux subtracted in 200 components = 0.00186452 Jy ! Clean residual min=-0.002460 max=0.002468 Jy/beam ! Clean residual mean=-0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.126297 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.126297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060565Jy sigma=0.941238 ! Fit after self-cal, rms=0.060547Jy sigma=0.940968 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9983 x 2.233 at 1.107 degrees (North through East) ! Clean map min=-0.0021685 max=0.11137 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.90 KK 0.90 ! KP 1.03 LA 0.98 MK 1.75 NL 0.99 ! OV 1.00 PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 0.88 KK 0.94 ! KP 1.01 LA 0.99 MK 1.90 NL 1.01 ! OV 1.02 PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 0.87 KK 0.91 ! KP 1.01 LA 0.98 MK 1.84 NL 0.98 ! OV 1.01 PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 0.89 KK 0.90 ! KP 1.02 LA 0.97 MK 1.76 NL 0.99 ! OV 1.03 PT 0.97 SC 0.99 ! ! ! Fit before self-cal, rms=0.060547Jy sigma=0.940968 ! Fit after self-cal, rms=0.070702Jy sigma=0.923727 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=2.306 mas, bpa=2.155 degrees ! Estimated noise=0.277862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284688 Jy ! Component: 100 - total flux cleaned = 0.000253905 Jy ! Component: 150 - total flux cleaned = 0.000227258 Jy ! Component: 200 - total flux cleaned = 0.000251239 Jy ! Total flux subtracted in 200 components = 0.000251239 Jy ! Clean residual min=-0.001071 max=0.001219 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.126548 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.126548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070681Jy sigma=0.923128 ! Fit after self-cal, rms=0.070744Jy sigma=0.922921 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070744Jy sigma=0.922921 ! Fit after self-cal, rms=0.072752Jy sigma=0.918907 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=2.312 mas, bpa=2.052 degrees ! Estimated noise=0.279162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.81425e-05 Jy ! Component: 100 - total flux cleaned = -3.86085e-05 Jy ! Component: 150 - total flux cleaned = -1.89997e-05 Jy ! Component: 200 - total flux cleaned = 1.75905e-05 Jy ! Total flux subtracted in 200 components = 1.75905e-05 Jy ! Clean residual min=-0.001007 max=0.001213 Jy/beam ! Clean residual mean=-0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.126566 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.126566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072736Jy sigma=0.918576 ! Fit after self-cal, rms=0.072758Jy sigma=0.918543 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.2, -43.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918003 Jy ! Component: 100 - total flux cleaned = 0.000893063 Jy ! Component: 150 - total flux cleaned = 0.000994975 Jy ! Component: 200 - total flux cleaned = 0.0010888 Jy ! Total flux subtracted in 200 components = 0.0010888 Jy ! Clean residual min=-0.000995 max=0.000976 Jy/beam ! Clean residual mean=-0.000000 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.127654 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 121 components and 0.127654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072728Jy sigma=0.918005 ! Fit after self-cal, rms=0.072729Jy sigma=0.917971 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072729Jy sigma=0.917971 ! Fit after self-cal, rms=0.073727Jy sigma=0.916570 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.02 mas, bmaj=2.311 mas, bpa=2.075 degrees ! Estimated noise=0.278508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159925 Jy ! Component: 100 - total flux cleaned = 0.000271543 Jy ! Component: 150 - total flux cleaned = 0.000356439 Jy ! Component: 200 - total flux cleaned = 0.000387768 Jy ! Total flux subtracted in 200 components = 0.000387768 Jy ! Clean residual min=-0.000904 max=0.000942 Jy/beam ! Clean residual mean=-0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.128042 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 0.128042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073714Jy sigma=0.916368 ! Fit after self-cal, rms=0.073721Jy sigma=0.916350 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.0439e-05 Jy ! Component: 100 - total flux cleaned = 6.05632e-05 Jy ! Component: 150 - total flux cleaned = 0.00010352 Jy ! Component: 200 - total flux cleaned = 0.000117272 Jy ! Total flux subtracted in 200 components = 0.000117272 Jy ! Clean residual min=-0.000915 max=0.000955 Jy/beam ! Clean residual mean=-0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.128159 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 143 components and 0.128159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073713Jy sigma=0.916227 ! Fit after self-cal, rms=0.073714Jy sigma=0.916224 ! Inverting map ! Added new window around map position (-44.4, -13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623974 Jy ! Component: 100 - total flux cleaned = 0.000548782 Jy ! Component: 150 - total flux cleaned = 0.000467134 Jy ! Component: 200 - total flux cleaned = 0.000452392 Jy ! Total flux subtracted in 200 components = 0.000452392 Jy ! Clean residual min=-0.000859 max=0.000914 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.128612 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 161 components and 0.128612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073694Jy sigma=0.915916 ! Fit after self-cal, rms=0.073695Jy sigma=0.915894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073695Jy sigma=0.915894 ! Fit after self-cal, rms=0.073805Jy sigma=0.915841 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.32 mas, bmaj=3.349 mas, bpa=2.721 degrees ! Estimated noise=0.30881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017965 Jy ! Component: 100 - total flux cleaned = 0.000229741 Jy ! Component: 150 - total flux cleaned = 0.00024024 Jy ! Component: 200 - total flux cleaned = 0.000259157 Jy ! Total flux subtracted in 200 components = 0.000259157 Jy ! Clean residual min=-0.000734 max=0.000744 Jy/beam ! Clean residual mean=-0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.128871 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 176 components and 0.128871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073801Jy sigma=0.915744 ! Fit after self-cal, rms=0.073801Jy sigma=0.915734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.34551e-05 Jy ! Component: 100 - total flux cleaned = 7.14055e-05 Jy ! Component: 150 - total flux cleaned = 8.79843e-05 Jy ! Component: 200 - total flux cleaned = 0.000103515 Jy ! Total flux subtracted in 200 components = 0.000103515 Jy ! Clean residual min=-0.000731 max=0.000744 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.128974 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 183 components and 0.128974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073800Jy sigma=0.915683 ! Fit after self-cal, rms=0.073800Jy sigma=0.915680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=2.311 mas, bpa=2.083 degrees ! Estimated noise=0.278152 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.019 x 2.311 at 2.083 degrees (North through East) ! Clean map min=-0.00077449 max=0.11121 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8316 mas, bmaj=2.022 mas, bpa=0.7947 degrees ! Estimated noise=0.501867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0860407 Jy ! Component: 100 - total flux cleaned = 0.105508 Jy ! Component: 150 - total flux cleaned = 0.112316 Jy ! Component: 200 - total flux cleaned = 0.116097 Jy ! Total flux subtracted in 200 components = 0.116097 Jy ! Clean residual min=-0.002109 max=0.001985 Jy/beam ! Clean residual mean=-0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.116097 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.116097 Jy ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=2.311 mas, bpa=2.083 degrees ! Estimated noise=0.278152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317968 Jy ! Component: 100 - total flux cleaned = 0.00513193 Jy ! Component: 150 - total flux cleaned = 0.0066464 Jy ! Component: 200 - total flux cleaned = 0.00788193 Jy ! Total flux subtracted in 200 components = 0.00788193 Jy ! Clean residual min=-0.001054 max=0.000990 Jy/beam ! Clean residual mean=-0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.123979 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 63 components and 0.123979 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.32 mas, bmaj=3.349 mas, bpa=2.721 degrees ! Estimated noise=0.30881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122745 Jy ! Component: 100 - total flux cleaned = 0.0020583 Jy ! Component: 150 - total flux cleaned = 0.00271057 Jy ! Component: 200 - total flux cleaned = 0.00312129 Jy ! Total flux subtracted in 200 components = 0.00312129 Jy ! Clean residual min=-0.000816 max=0.000806 Jy/beam ! Clean residual mean=-0.000001 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.1271 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279555 Jy ! Component: 100 - total flux cleaned = 0.000476367 Jy ! Component: 150 - total flux cleaned = 0.000653377 Jy ! Component: 200 - total flux cleaned = 0.000800209 Jy ! Total flux subtracted in 200 components = 0.000800209 Jy ! Clean residual min=-0.000778 max=0.000785 Jy/beam ! Clean residual mean=-0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.127901 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 125 components and 0.127901 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=2.311 mas, bpa=2.083 degrees ! Estimated noise=0.278152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.64602e-07 Jy ! Component: 100 - total flux cleaned = 5.11359e-05 Jy ! Component: 150 - total flux cleaned = 9.78005e-05 Jy ! Component: 200 - total flux cleaned = 0.000186273 Jy ! Total flux subtracted in 200 components = 0.000186273 Jy ! Clean residual min=-0.001015 max=0.000937 Jy/beam ! Clean residual mean=-0.000000 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.128087 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 145 components and 0.128087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073849Jy sigma=0.916261 ! Fit after self-cal, rms=0.073850Jy sigma=0.916144 wmodel J1016+0513_X_map.mod ! Writing 145 model components to file: J1016+0513_X_map.mod wobs J1016+0513_X_uvs.fits ! Writing UV FITS file: J1016+0513_X_uvs.fits wwins J1016+0513_X_map.win ! wwins: Wrote 5 windows to J1016+0513_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.61616e-07 Jy ! Component: 100 - total flux cleaned = -0.000147219 Jy ! Component: 150 - total flux cleaned = -0.000240557 Jy ! Component: 200 - total flux cleaned = -0.000301259 Jy ! Component: 250 - total flux cleaned = -0.000361021 Jy ! Component: 300 - total flux cleaned = -0.000448859 Jy ! Component: 350 - total flux cleaned = -0.000520818 Jy ! Component: 400 - total flux cleaned = -0.000563425 Jy ! Component: 450 - total flux cleaned = -0.000619558 Jy ! Component: 500 - total flux cleaned = -0.000675184 Jy ! Component: 550 - total flux cleaned = -0.000730141 Jy ! Component: 600 - total flux cleaned = -0.000757327 Jy ! Component: 650 - total flux cleaned = -0.000824281 Jy ! Component: 700 - total flux cleaned = -0.000811248 Jy ! Component: 750 - total flux cleaned = -0.000876875 Jy ! Component: 800 - total flux cleaned = -0.000915599 Jy ! Component: 850 - total flux cleaned = -0.00090262 Jy ! Component: 900 - total flux cleaned = -0.000928003 Jy ! Component: 950 - total flux cleaned = -0.000915412 Jy ! Component: 1000 - total flux cleaned = -0.000952966 Jy ! Component: 1050 - total flux cleaned = -0.000977822 Jy ! Component: 1100 - total flux cleaned = -0.000977673 Jy ! Component: 1150 - total flux cleaned = -0.000977737 Jy ! Component: 1200 - total flux cleaned = -0.00100195 Jy ! Component: 1250 - total flux cleaned = -0.000989909 Jy ! Component: 1300 - total flux cleaned = -0.00100189 Jy ! Component: 1350 - total flux cleaned = -0.00100188 Jy ! Component: 1400 - total flux cleaned = -0.000930823 Jy ! Component: 1450 - total flux cleaned = -0.000954382 Jy ! Component: 1500 - total flux cleaned = -0.000919383 Jy ! Component: 1550 - total flux cleaned = -0.000884597 Jy ! Component: 1600 - total flux cleaned = -0.000896142 Jy ! Component: 1650 - total flux cleaned = -0.000850177 Jy ! Component: 1700 - total flux cleaned = -0.000827476 Jy ! Component: 1750 - total flux cleaned = -0.000827614 Jy ! Component: 1800 - total flux cleaned = -0.000861498 Jy ! Component: 1850 - total flux cleaned = -0.00086147 Jy ! Component: 1900 - total flux cleaned = -0.000861491 Jy ! Component: 1950 - total flux cleaned = -0.000805933 Jy ! Component: 2000 - total flux cleaned = -0.000839132 Jy ! Component: 2050 - total flux cleaned = -0.000850172 Jy ! Component: 2100 - total flux cleaned = -0.000850107 Jy ! Component: 2150 - total flux cleaned = -0.000882885 Jy ! Component: 2200 - total flux cleaned = -0.000915337 Jy ! Component: 2250 - total flux cleaned = -0.000904481 Jy ! Component: 2300 - total flux cleaned = -0.000915244 Jy ! Component: 2350 - total flux cleaned = -0.000925988 Jy ! Component: 2400 - total flux cleaned = -0.000925994 Jy ! Component: 2450 - total flux cleaned = -0.000989696 Jy ! Component: 2500 - total flux cleaned = -0.00100025 Jy ! Component: 2550 - total flux cleaned = -0.00100019 Jy ! Component: 2600 - total flux cleaned = -0.00104204 Jy ! Component: 2650 - total flux cleaned = -0.00104205 Jy ! Component: 2700 - total flux cleaned = -0.00104203 Jy ! Component: 2750 - total flux cleaned = -0.00105243 Jy ! Component: 2800 - total flux cleaned = -0.00104212 Jy ! Component: 2850 - total flux cleaned = -0.00108323 Jy ! Component: 2900 - total flux cleaned = -0.00106277 Jy ! Component: 2950 - total flux cleaned = -0.00110352 Jy ! Component: 3000 - total flux cleaned = -0.00109341 Jy ! Component: 3050 - total flux cleaned = -0.00111363 Jy ! Component: 3100 - total flux cleaned = -0.00112378 Jy ! Component: 3150 - total flux cleaned = -0.00113386 Jy ! Component: 3200 - total flux cleaned = -0.00113391 Jy ! Component: 3250 - total flux cleaned = -0.00116381 Jy ! Component: 3300 - total flux cleaned = -0.00116388 Jy ! Component: 3350 - total flux cleaned = -0.00118366 Jy ! Component: 3400 - total flux cleaned = -0.00123297 Jy ! Component: 3450 - total flux cleaned = -0.00130169 Jy ! Component: 3500 - total flux cleaned = -0.0012821 Jy ! Component: 3550 - total flux cleaned = -0.00131142 Jy ! Component: 3600 - total flux cleaned = -0.00135026 Jy ! Component: 3650 - total flux cleaned = -0.00136965 Jy ! Component: 3700 - total flux cleaned = -0.00138893 Jy ! Component: 3750 - total flux cleaned = -0.00139851 Jy ! Component: 3800 - total flux cleaned = -0.00142728 Jy ! Component: 3850 - total flux cleaned = -0.00142733 Jy ! Component: 3900 - total flux cleaned = -0.00143688 Jy ! Component: 3950 - total flux cleaned = -0.00147491 Jy ! Component: 4000 - total flux cleaned = -0.00147488 Jy ! Component: 4050 - total flux cleaned = -0.00150319 Jy ! Total flux subtracted in 4096 components = -0.0015126 Jy ! Clean residual min=-0.000667 max=0.000589 Jy/beam ! Clean residual mean=0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.126574 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 434 components and 0.126574 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J1016+0513_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.019 x 2.311 at 2.083 degrees (North through East) ! Clean map min=-0.00086161 max=0.11134 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J1016+0513_X_map.fits wmodel /scr/pima/rv120_uvs/J1016+0513_X_map.mod ! Writing 434 model components to file: /scr/pima/rv120_uvs/J1016+0513_X_map.mod wobs /scr/pima/rv120_uvs/J1016+0513_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J1016+0513_X_uvs.fits wwins /scr/pima/rv120_uvs/J1016+0513_X_map.win ! wwins: Wrote 6 windows to /scr/pima/rv120_uvs/J1016+0513_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.111335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.444798 0.444798 0.889596 1.77919 3.55839 7.11677 14.2335 28.4671 56.9342 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.111 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 674.463 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J1016+0513_X_dfm.log closed on Fri Dec 22 22:41:23 2017