! Started logfile: /scr/pima/rv120_uvs/J1016+0513_S_dfm.log on Fri Dec 22 22:32:32 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv120_uvs/J1016+0513_S_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J1016+0513_S_uva.fits ! AN table 1: 25 integrations on 3 of 3 possible baselines. ! AN table 2: 133 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.638024 visibilities/baseline/integration-bin. ! Found source: J1016+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 18860 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1016+0513_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 384 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 384 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 637 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 384 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003962Jy sigma=22.240352 ! Fit after self-cal, rms=0.902241Jy sigma=19.906327 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.545 mas, bmaj=6.696 mas, bpa=-5.271 degrees ! Estimated noise=0.460106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0756258 Jy ! Component: 100 - total flux cleaned = 0.0944791 Jy ! Total flux subtracted in 100 components = 0.0944791 Jy ! Clean residual min=-0.003853 max=0.007962 Jy/beam ! Clean residual mean=-0.000006 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.0944791 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0944791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057260Jy sigma=1.149103 ! Fit after self-cal, rms=0.057069Jy sigma=1.145719 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00895366 Jy ! Component: 100 - total flux cleaned = 0.0140612 Jy ! Total flux subtracted in 100 components = 0.0140612 Jy ! Clean residual min=-0.002987 max=0.003069 Jy/beam ! Clean residual mean=-0.000003 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.10854 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.10854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055511Jy sigma=1.098028 ! Fit after self-cal, rms=0.055506Jy sigma=1.097556 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=7.644 mas, bpa=-3.605 degrees ! Estimated noise=0.256726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466139 Jy ! Component: 100 - total flux cleaned = 0.0071771 Jy ! Component: 150 - total flux cleaned = 0.00797987 Jy ! Component: 200 - total flux cleaned = 0.00860527 Jy ! Total flux subtracted in 200 components = 0.00860527 Jy ! Clean residual min=-0.002108 max=0.002428 Jy/beam ! Clean residual mean=-0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.117146 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 0.117146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055133Jy sigma=1.086551 ! Fit after self-cal, rms=0.055137Jy sigma=1.086287 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.071 x 7.644 at -3.605 degrees (North through East) ! Clean map min=-0.0018118 max=0.09995 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.04 HN 0.91 KK 0.94 ! KP 0.95 LA 0.99 MK 1.30 NL 1.02 ! OV 0.96 PT 0.97 SC 1.01 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 0.94 KK 0.92 ! KP 0.97 LA 0.98 MK 1.30 NL 1.02 ! OV 0.99 PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 0.92 KK 1.02 ! KP 1.00* LA 1.81 MK 0.84 NL 1.00* ! OV 0.99 PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* WZ 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 0.96 KK 0.98 ! KP 0.99 LA 0.99 MK 1.33 NL 1.00 ! OV 0.92 PT 0.98 SC 1.05 ! ! ! Fit before self-cal, rms=0.055137Jy sigma=1.086287 ! Fit after self-cal, rms=0.059404Jy sigma=1.066102 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.791 mas, bpa=-3.147 degrees ! Estimated noise=0.257998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.82132e-05 Jy ! Component: 100 - total flux cleaned = 0.000401602 Jy ! Component: 150 - total flux cleaned = 0.000430018 Jy ! Component: 200 - total flux cleaned = 0.000428898 Jy ! Total flux subtracted in 200 components = 0.000428898 Jy ! Clean residual min=-0.001680 max=0.001937 Jy/beam ! Clean residual mean=0.000001 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.117575 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.117575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059366Jy sigma=1.065304 ! Fit after self-cal, rms=0.059464Jy sigma=1.064880 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059464Jy sigma=1.064880 ! Fit after self-cal, rms=0.060585Jy sigma=1.052647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.775 mas, bpa=-3.082 degrees ! Estimated noise=0.260354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973236 Jy ! Component: 100 - total flux cleaned = 0.00109877 Jy ! Component: 150 - total flux cleaned = 0.00113956 Jy ! Component: 200 - total flux cleaned = 0.00115775 Jy ! Total flux subtracted in 200 components = 0.00115775 Jy ! Clean residual min=-0.001500 max=0.001486 Jy/beam ! Clean residual mean=-0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.118732 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.118732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060562Jy sigma=1.052135 ! Fit after self-cal, rms=0.060583Jy sigma=1.051986 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.4127e-05 Jy ! Component: 100 - total flux cleaned = 9.37182e-05 Jy ! Component: 150 - total flux cleaned = 9.4055e-05 Jy ! Component: 200 - total flux cleaned = 0.000122389 Jy ! Total flux subtracted in 200 components = 0.000122389 Jy ! Clean residual min=-0.001475 max=0.001491 Jy/beam ! Clean residual mean=-0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.118855 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.118855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060574Jy sigma=1.051797 ! Fit after self-cal, rms=0.060574Jy sigma=1.051781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060574Jy sigma=1.051781 ! Fit after self-cal, rms=0.063221Jy sigma=1.045008 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=7.783 mas, bpa=-2.976 degrees ! Estimated noise=0.260545 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015106 Jy ! Component: 100 - total flux cleaned = -0.000130771 Jy ! Component: 150 - total flux cleaned = -0.000115002 Jy ! Component: 200 - total flux cleaned = -0.000115922 Jy ! Total flux subtracted in 200 components = -0.000115922 Jy ! Clean residual min=-0.001308 max=0.001371 Jy/beam ! Clean residual mean=-0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.118739 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.118739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063206Jy sigma=1.044753 ! Fit after self-cal, rms=0.063245Jy sigma=1.044644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45, -82.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000997239 Jy ! Component: 100 - total flux cleaned = 0.00117359 Jy ! Component: 150 - total flux cleaned = 0.00120203 Jy ! Component: 200 - total flux cleaned = 0.0012514 Jy ! Total flux subtracted in 200 components = 0.0012514 Jy ! Clean residual min=-0.001204 max=0.001183 Jy/beam ! Clean residual mean=0.000000 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.11999 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.11999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063205Jy sigma=1.043608 ! Fit after self-cal, rms=0.063199Jy sigma=1.043564 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063199Jy sigma=1.043564 ! Fit after self-cal, rms=0.063410Jy sigma=1.043466 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.821 mas, bmaj=11.62 mas, bpa=2.979 degrees ! Estimated noise=0.320976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311981 Jy ! Component: 100 - total flux cleaned = 0.000460983 Jy ! Component: 150 - total flux cleaned = 0.000515458 Jy ! Component: 200 - total flux cleaned = 0.000561832 Jy ! Total flux subtracted in 200 components = 0.000561832 Jy ! Clean residual min=-0.001229 max=0.001002 Jy/beam ! Clean residual mean=-0.000000 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.120552 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 127 components and 0.120552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063405Jy sigma=1.043337 ! Fit after self-cal, rms=0.063410Jy sigma=1.043313 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105881 Jy ! Component: 100 - total flux cleaned = 0.000159721 Jy ! Component: 150 - total flux cleaned = 0.000188648 Jy ! Component: 200 - total flux cleaned = 0.000215103 Jy ! Total flux subtracted in 200 components = 0.000215103 Jy ! Clean residual min=-0.001230 max=0.000985 Jy/beam ! Clean residual mean=-0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.120767 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 138 components and 0.120767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063409Jy sigma=1.043268 ! Fit after self-cal, rms=0.063409Jy sigma=1.043264 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.777 mas, bpa=-2.841 degrees ! Estimated noise=0.260254 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 7.777 at -2.841 degrees (North through East) ! Clean map min=-0.0011261 max=0.099886 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=6.886 mas, bpa=-4.074 degrees ! Estimated noise=0.466724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0767581 Jy ! Component: 100 - total flux cleaned = 0.0958668 Jy ! Component: 150 - total flux cleaned = 0.104094 Jy ! Component: 200 - total flux cleaned = 0.108393 Jy ! Total flux subtracted in 200 components = 0.108393 Jy ! Clean residual min=-0.002526 max=0.002752 Jy/beam ! Clean residual mean=-0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.108393 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.108393 Jy ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.777 mas, bpa=-2.841 degrees ! Estimated noise=0.260254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424638 Jy ! Component: 100 - total flux cleaned = 0.00661602 Jy ! Component: 150 - total flux cleaned = 0.00826826 Jy ! Component: 200 - total flux cleaned = 0.00934872 Jy ! Total flux subtracted in 200 components = 0.00934872 Jy ! Clean residual min=-0.001334 max=0.001249 Jy/beam ! Clean residual mean=0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.117742 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 62 components and 0.117742 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.821 mas, bmaj=11.62 mas, bpa=2.979 degrees ! Estimated noise=0.320976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127557 Jy ! Component: 100 - total flux cleaned = 0.00208999 Jy ! Component: 150 - total flux cleaned = 0.00250992 Jy ! Component: 200 - total flux cleaned = 0.00278704 Jy ! Total flux subtracted in 200 components = 0.00278704 Jy ! Clean residual min=-0.001286 max=0.001006 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.120529 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117513 Jy ! Component: 100 - total flux cleaned = 0.000219852 Jy ! Component: 150 - total flux cleaned = 0.000296148 Jy ! Component: 200 - total flux cleaned = 0.000341703 Jy ! Total flux subtracted in 200 components = 0.000341703 Jy ! Clean residual min=-0.001269 max=0.000985 Jy/beam ! Clean residual mean=-0.000000 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.12087 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 109 components and 0.12087 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.777 mas, bpa=-2.841 degrees ! Estimated noise=0.260254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109319 Jy ! Component: 100 - total flux cleaned = -0.0001118 Jy ! Component: 150 - total flux cleaned = -3.23047e-05 Jy ! Component: 200 - total flux cleaned = 1.63451e-05 Jy ! Total flux subtracted in 200 components = 1.63451e-05 Jy ! Clean residual min=-0.001233 max=0.001194 Jy/beam ! Clean residual mean=-0.000000 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.120887 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 126 components and 0.120887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063413Jy sigma=1.043559 ! Fit after self-cal, rms=0.063406Jy sigma=1.043468 wmodel J1016+0513_S_map.mod ! Writing 126 model components to file: J1016+0513_S_map.mod wobs J1016+0513_S_uvs.fits ! Writing UV FITS file: J1016+0513_S_uvs.fits wwins J1016+0513_S_map.win ! wwins: Wrote 3 windows to J1016+0513_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.6729e-05 Jy ! Component: 100 - total flux cleaned = 5.46361e-05 Jy ! Component: 150 - total flux cleaned = 0.000154126 Jy ! Component: 200 - total flux cleaned = 0.000231575 Jy ! Component: 250 - total flux cleaned = 0.00028785 Jy ! Component: 300 - total flux cleaned = 0.00034325 Jy ! Component: 350 - total flux cleaned = 0.000361639 Jy ! Component: 400 - total flux cleaned = 0.000379897 Jy ! Component: 450 - total flux cleaned = 0.000432523 Jy ! Component: 500 - total flux cleaned = 0.000484262 Jy ! Component: 550 - total flux cleaned = 0.000484227 Jy ! Component: 600 - total flux cleaned = 0.000534403 Jy ! Component: 650 - total flux cleaned = 0.000534347 Jy ! Component: 700 - total flux cleaned = 0.000567246 Jy ! Component: 750 - total flux cleaned = 0.00061571 Jy ! Component: 800 - total flux cleaned = 0.000647775 Jy ! Component: 850 - total flux cleaned = 0.000742363 Jy ! Component: 900 - total flux cleaned = 0.000773487 Jy ! Component: 950 - total flux cleaned = 0.00083551 Jy ! Component: 1000 - total flux cleaned = 0.000881296 Jy ! Component: 1050 - total flux cleaned = 0.000911517 Jy ! Component: 1100 - total flux cleaned = 0.000911661 Jy ! Component: 1150 - total flux cleaned = 0.0010309 Jy ! Component: 1200 - total flux cleaned = 0.00100123 Jy ! Component: 1250 - total flux cleaned = 0.0010305 Jy ! Component: 1300 - total flux cleaned = 0.0010452 Jy ! Component: 1350 - total flux cleaned = 0.00113161 Jy ! Component: 1400 - total flux cleaned = 0.00113155 Jy ! Component: 1450 - total flux cleaned = 0.00116011 Jy ! Component: 1500 - total flux cleaned = 0.00124465 Jy ! Component: 1550 - total flux cleaned = 0.00130078 Jy ! Component: 1600 - total flux cleaned = 0.00134246 Jy ! Component: 1650 - total flux cleaned = 0.00139762 Jy ! Component: 1700 - total flux cleaned = 0.00143865 Jy ! Component: 1750 - total flux cleaned = 0.001493 Jy ! Component: 1800 - total flux cleaned = 0.00153371 Jy ! Component: 1850 - total flux cleaned = 0.00157395 Jy ! Component: 1900 - total flux cleaned = 0.0016142 Jy ! Component: 1950 - total flux cleaned = 0.00170707 Jy ! Component: 2000 - total flux cleaned = 0.0017598 Jy ! Component: 2050 - total flux cleaned = 0.00178594 Jy ! Component: 2100 - total flux cleaned = 0.00190314 Jy ! Component: 2150 - total flux cleaned = 0.00190305 Jy ! Component: 2200 - total flux cleaned = 0.00196751 Jy ! Component: 2250 - total flux cleaned = 0.0020443 Jy ! Component: 2300 - total flux cleaned = 0.00209521 Jy ! Component: 2350 - total flux cleaned = 0.00217113 Jy ! Component: 2400 - total flux cleaned = 0.00219621 Jy ! Component: 2450 - total flux cleaned = 0.0022587 Jy ! Component: 2500 - total flux cleaned = 0.00230858 Jy ! Component: 2550 - total flux cleaned = 0.00237037 Jy ! Component: 2600 - total flux cleaned = 0.00244401 Jy ! Component: 2650 - total flux cleaned = 0.00246846 Jy ! Component: 2700 - total flux cleaned = 0.00251716 Jy ! Component: 2750 - total flux cleaned = 0.00262604 Jy ! Component: 2800 - total flux cleaned = 0.00265011 Jy ! Component: 2850 - total flux cleaned = 0.00269794 Jy ! Component: 2900 - total flux cleaned = 0.00276942 Jy ! Component: 2950 - total flux cleaned = 0.00276942 Jy ! Component: 3000 - total flux cleaned = 0.00285187 Jy ! Component: 3050 - total flux cleaned = 0.00292224 Jy ! Component: 3100 - total flux cleaned = 0.0029574 Jy ! Component: 3150 - total flux cleaned = 0.00301544 Jy ! Component: 3200 - total flux cleaned = 0.00310783 Jy ! Component: 3250 - total flux cleaned = 0.00309628 Jy ! Component: 3300 - total flux cleaned = 0.00319927 Jy ! Component: 3350 - total flux cleaned = 0.00319922 Jy ! Component: 3400 - total flux cleaned = 0.00328997 Jy ! Component: 3450 - total flux cleaned = 0.00336888 Jy ! Component: 3500 - total flux cleaned = 0.00342499 Jy ! Component: 3550 - total flux cleaned = 0.00344736 Jy ! Component: 3600 - total flux cleaned = 0.00350302 Jy ! Component: 3650 - total flux cleaned = 0.00354728 Jy ! Component: 3700 - total flux cleaned = 0.00356939 Jy ! Component: 3750 - total flux cleaned = 0.00365718 Jy ! Component: 3800 - total flux cleaned = 0.00365713 Jy ! Component: 3850 - total flux cleaned = 0.00366804 Jy ! Component: 3900 - total flux cleaned = 0.00368985 Jy ! Component: 3950 - total flux cleaned = 0.003733 Jy ! Component: 4000 - total flux cleaned = 0.00375448 Jy ! Component: 4050 - total flux cleaned = 0.00379729 Jy ! Total flux subtracted in 4096 components = 0.00385053 Jy ! Clean residual min=-0.000620 max=0.000602 Jy/beam ! Clean residual mean=-0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.124737 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 409 components and 0.124737 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J1016+0513_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 7.777 at -2.841 degrees (North through East) ! Clean map min=-0.00099337 max=0.10051 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J1016+0513_S_map.fits wmodel /scr/pima/rv120_uvs/J1016+0513_S_map.mod ! Writing 409 model components to file: /scr/pima/rv120_uvs/J1016+0513_S_map.mod wobs /scr/pima/rv120_uvs/J1016+0513_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J1016+0513_S_uvs.fits wwins /scr/pima/rv120_uvs/J1016+0513_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv120_uvs/J1016+0513_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.100508 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193742 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.57829 0.57829 1.15658 2.31316 4.62632 9.25264 18.5053 37.0105 74.0211 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.1 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 518.771 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J1016+0513_S_dfm.log closed on Fri Dec 22 22:32:38 2017