! Started logfile: /scr/pima/rv120_uvs/J0449+0729_X_dfm.log on Fri Dec 22 22:39:42 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J0449+0729_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J0449+0729_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983333 visibilities/baseline/integration-bin. ! Found source: J0449+0729 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7788 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0449+0729_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.006682Jy sigma=21.414668 ! Fit after self-cal, rms=0.940099Jy sigma=19.903546 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8255 mas, bmaj=1.744 mas, bpa=3.172 degrees ! Estimated noise=0.728104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479272 Jy ! Component: 100 - total flux cleaned = 0.0595002 Jy ! Total flux subtracted in 100 components = 0.0595002 Jy ! Clean residual min=-0.003061 max=0.004395 Jy/beam ! Clean residual mean=-0.000006 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.0595002 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0595002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059279Jy sigma=0.951219 ! Fit after self-cal, rms=0.058643Jy sigma=0.939502 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519823 Jy ! Component: 100 - total flux cleaned = 0.00768233 Jy ! Total flux subtracted in 100 components = 0.00768233 Jy ! Clean residual min=-0.002866 max=0.003134 Jy/beam ! Clean residual mean=-0.000003 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0671825 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 0.0671825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058281Jy sigma=0.925781 ! Fit after self-cal, rms=0.058306Jy sigma=0.925604 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.042 mas, bmaj=2.078 mas, bpa=0.1567 degrees ! Estimated noise=0.405766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000982866 Jy ! Component: 100 - total flux cleaned = 0.00115559 Jy ! Component: 150 - total flux cleaned = 0.00118079 Jy ! Component: 200 - total flux cleaned = 0.001203 Jy ! Total flux subtracted in 200 components = 0.001203 Jy ! Clean residual min=-0.001598 max=0.001714 Jy/beam ! Clean residual mean=-0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0683855 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.0683855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058279Jy sigma=0.924799 ! Fit after self-cal, rms=0.058281Jy sigma=0.924775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.042 x 2.078 at 0.1567 degrees (North through East) ! Clean map min=-0.0015032 max=0.063358 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.07 KP 1.02 ! LA 0.99 MK 0.89 NL 0.99 OV 0.99 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.11 KP 1.05 ! LA 0.98 MK 0.97 NL 1.00 OV 0.98 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.16 KP 1.04 ! LA 0.94 MK 0.95 NL 1.02 OV 1.00 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.07 KP 1.07 ! LA 0.96 MK 1.04 NL 1.04 OV 1.00 ! PT 0.99 SC 0.96 ! ! ! Fit before self-cal, rms=0.058281Jy sigma=0.924775 ! Fit after self-cal, rms=0.060255Jy sigma=0.922399 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.037 mas, bmaj=2.071 mas, bpa=0.06092 degrees ! Estimated noise=0.403376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.45589e-05 Jy ! Component: 100 - total flux cleaned = -0.00010317 Jy ! Component: 150 - total flux cleaned = -8.67159e-05 Jy ! Component: 200 - total flux cleaned = -5.58475e-05 Jy ! Total flux subtracted in 200 components = -5.58475e-05 Jy ! Clean residual min=-0.001508 max=0.001473 Jy/beam ! Clean residual mean=-0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0683297 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.0683297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060242Jy sigma=0.922221 ! Fit after self-cal, rms=0.060275Jy sigma=0.922149 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060275Jy sigma=0.922149 ! Fit after self-cal, rms=0.060620Jy sigma=0.919500 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.036 mas, bmaj=2.067 mas, bpa=0.1866 degrees ! Estimated noise=0.403418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140842 Jy ! Component: 100 - total flux cleaned = 0.00015453 Jy ! Component: 150 - total flux cleaned = 0.000154394 Jy ! Component: 200 - total flux cleaned = 0.000166576 Jy ! Total flux subtracted in 200 components = 0.000166576 Jy ! Clean residual min=-0.001481 max=0.001307 Jy/beam ! Clean residual mean=-0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0684962 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0684962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060610Jy sigma=0.919417 ! Fit after self-cal, rms=0.060622Jy sigma=0.919359 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78999e-05 Jy ! Component: 100 - total flux cleaned = 1.78877e-05 Jy ! Component: 150 - total flux cleaned = 2.84322e-05 Jy ! Component: 200 - total flux cleaned = 1.84713e-05 Jy ! Total flux subtracted in 200 components = 1.84713e-05 Jy ! Clean residual min=-0.001483 max=0.001304 Jy/beam ! Clean residual mean=-0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0685147 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0685147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060616Jy sigma=0.919312 ! Fit after self-cal, rms=0.060616Jy sigma=0.919307 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060616Jy sigma=0.919307 ! Fit after self-cal, rms=0.060280Jy sigma=0.919279 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=2.065 mas, bpa=0.05935 degrees ! Estimated noise=0.403084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164202 Jy ! Component: 100 - total flux cleaned = 0.000175559 Jy ! Component: 150 - total flux cleaned = 0.000186254 Jy ! Component: 200 - total flux cleaned = 0.000186112 Jy ! Total flux subtracted in 200 components = 0.000186112 Jy ! Clean residual min=-0.001482 max=0.001304 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0687008 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0687008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060273Jy sigma=0.919234 ! Fit after self-cal, rms=0.060271Jy sigma=0.919228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.40478e-05 Jy ! Component: 100 - total flux cleaned = 2.46698e-05 Jy ! Component: 150 - total flux cleaned = 2.48609e-05 Jy ! Component: 200 - total flux cleaned = 8.17806e-06 Jy ! Total flux subtracted in 200 components = 8.17806e-06 Jy ! Clean residual min=-0.001480 max=0.001307 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.068709 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.068709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060267Jy sigma=0.919197 ! Fit after self-cal, rms=0.060267Jy sigma=0.919193 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060267Jy sigma=0.919193 ! Fit after self-cal, rms=0.059987Jy sigma=0.919175 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.228 mas, bmaj=3.138 mas, bpa=-2.6 degrees ! Estimated noise=0.456401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.15544e-05 Jy ! Component: 100 - total flux cleaned = -7.52648e-06 Jy ! Component: 150 - total flux cleaned = 1.33404e-05 Jy ! Component: 200 - total flux cleaned = 3.08187e-05 Jy ! Total flux subtracted in 200 components = 3.08187e-05 Jy ! Clean residual min=-0.001172 max=0.001155 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0687398 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 30 components and 0.0687398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059991Jy sigma=0.919202 ! Fit after self-cal, rms=0.059989Jy sigma=0.919189 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.36033e-06 Jy ! Component: 100 - total flux cleaned = 2.49828e-05 Jy ! Component: 150 - total flux cleaned = 4.12299e-05 Jy ! Component: 200 - total flux cleaned = 5.13178e-05 Jy ! Total flux subtracted in 200 components = 5.13178e-05 Jy ! Clean residual min=-0.001175 max=0.001161 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0687911 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 31 components and 0.0687911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059992Jy sigma=0.919215 ! Fit after self-cal, rms=0.059992Jy sigma=0.919206 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.03 mas, bmaj=2.063 mas, bpa=-0.07105 degrees ! Estimated noise=0.402835 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.03 x 2.063 at -0.07105 degrees (North through East) ! Clean map min=-0.0013292 max=0.062663 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8156 mas, bmaj=1.732 mas, bpa=3.04 degrees ! Estimated noise=0.720124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0477772 Jy ! Component: 100 - total flux cleaned = 0.0600979 Jy ! Component: 150 - total flux cleaned = 0.0653921 Jy ! Component: 200 - total flux cleaned = 0.0679879 Jy ! Total flux subtracted in 200 components = 0.0679879 Jy ! Clean residual min=-0.002693 max=0.002609 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0679879 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0679879 Jy ! Inverting map and beam ! Estimated beam: bmin=1.03 mas, bmaj=2.063 mas, bpa=-0.07105 degrees ! Estimated noise=0.402835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412611 Jy ! Component: 100 - total flux cleaned = 0.000520178 Jy ! Component: 150 - total flux cleaned = 0.000580441 Jy ! Component: 200 - total flux cleaned = 0.000563905 Jy ! Total flux subtracted in 200 components = 0.000563905 Jy ! Clean residual min=-0.001502 max=0.001341 Jy/beam ! Clean residual mean=-0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0685518 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.0685518 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.228 mas, bmaj=3.138 mas, bpa=-2.6 degrees ! Estimated noise=0.456401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.86807e-06 Jy ! Component: 100 - total flux cleaned = 4.50563e-05 Jy ! Component: 150 - total flux cleaned = 7.60026e-05 Jy ! Component: 200 - total flux cleaned = 0.000100317 Jy ! Total flux subtracted in 200 components = 0.000100317 Jy ! Clean residual min=-0.001167 max=0.001151 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0686521 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.23857e-05 Jy ! Component: 100 - total flux cleaned = 3.68816e-05 Jy ! Component: 150 - total flux cleaned = 4.84926e-05 Jy ! Component: 200 - total flux cleaned = 5.61116e-05 Jy ! Total flux subtracted in 200 components = 5.61116e-05 Jy ! Clean residual min=-0.001161 max=0.001159 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0687082 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0687082 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.03 mas, bmaj=2.063 mas, bpa=-0.07105 degrees ! Estimated noise=0.402835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.20527e-07 Jy ! Component: 100 - total flux cleaned = -3.21896e-05 Jy ! Component: 150 - total flux cleaned = -3.23666e-05 Jy ! Component: 200 - total flux cleaned = -1.97678e-05 Jy ! Total flux subtracted in 200 components = -1.97678e-05 Jy ! Clean residual min=-0.001489 max=0.001336 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0686884 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0686884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059989Jy sigma=0.919240 ! Fit after self-cal, rms=0.059993Jy sigma=0.919232 wmodel J0449+0729_X_map.mod ! Writing 30 model components to file: J0449+0729_X_map.mod wobs J0449+0729_X_uvs.fits ! Writing UV FITS file: J0449+0729_X_uvs.fits wwins J0449+0729_X_map.win ! wwins: Wrote 1 windows to J0449+0729_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000510112 Jy ! Component: 100 - total flux cleaned = -0.000706807 Jy ! Component: 150 - total flux cleaned = -0.000776935 Jy ! Component: 200 - total flux cleaned = -0.000776138 Jy ! Component: 250 - total flux cleaned = -0.000797775 Jy ! Component: 300 - total flux cleaned = -0.00079732 Jy ! Component: 350 - total flux cleaned = -0.000712216 Jy ! Component: 400 - total flux cleaned = -0.000691597 Jy ! Component: 450 - total flux cleaned = -0.000650842 Jy ! Component: 500 - total flux cleaned = -0.000610419 Jy ! Component: 550 - total flux cleaned = -0.000570149 Jy ! Component: 600 - total flux cleaned = -0.000491386 Jy ! Component: 650 - total flux cleaned = -0.000413949 Jy ! Component: 700 - total flux cleaned = -0.000337855 Jy ! Component: 750 - total flux cleaned = -0.000243715 Jy ! Component: 800 - total flux cleaned = -0.000188355 Jy ! Component: 850 - total flux cleaned = -0.000151724 Jy ! Component: 900 - total flux cleaned = -0.000115656 Jy ! Component: 950 - total flux cleaned = -7.98921e-05 Jy ! Component: 1000 - total flux cleaned = -4.44639e-05 Jy ! Component: 1050 - total flux cleaned = 4.35467e-05 Jy ! Component: 1100 - total flux cleaned = 2.59898e-05 Jy ! Component: 1150 - total flux cleaned = 9.52458e-05 Jy ! Component: 1200 - total flux cleaned = 0.000146852 Jy ! Component: 1250 - total flux cleaned = 0.000198164 Jy ! Component: 1300 - total flux cleaned = 0.00024897 Jy ! Component: 1350 - total flux cleaned = 0.000316072 Jy ! Component: 1400 - total flux cleaned = 0.000382306 Jy ! Component: 1450 - total flux cleaned = 0.000398565 Jy ! Component: 1500 - total flux cleaned = 0.000415041 Jy ! Component: 1550 - total flux cleaned = 0.000480064 Jy ! Component: 1600 - total flux cleaned = 0.000480135 Jy ! Component: 1650 - total flux cleaned = 0.000496177 Jy ! Component: 1700 - total flux cleaned = 0.000511883 Jy ! Component: 1750 - total flux cleaned = 0.000590367 Jy ! Component: 1800 - total flux cleaned = 0.000605703 Jy ! Component: 1850 - total flux cleaned = 0.000574632 Jy ! Component: 1900 - total flux cleaned = 0.000590101 Jy ! Component: 1950 - total flux cleaned = 0.00065139 Jy ! Component: 2000 - total flux cleaned = 0.000651497 Jy ! Component: 2050 - total flux cleaned = 0.000666752 Jy ! Component: 2100 - total flux cleaned = 0.000681703 Jy ! Component: 2150 - total flux cleaned = 0.000696374 Jy ! Component: 2200 - total flux cleaned = 0.000696372 Jy ! Component: 2250 - total flux cleaned = 0.000696207 Jy ! Component: 2300 - total flux cleaned = 0.000623362 Jy ! Component: 2350 - total flux cleaned = 0.000666807 Jy ! Component: 2400 - total flux cleaned = 0.000652326 Jy ! Component: 2450 - total flux cleaned = 0.000638048 Jy ! Component: 2500 - total flux cleaned = 0.000609517 Jy ! Component: 2550 - total flux cleaned = 0.000609479 Jy ! Component: 2600 - total flux cleaned = 0.000567289 Jy ! Component: 2650 - total flux cleaned = 0.000609337 Jy ! Component: 2700 - total flux cleaned = 0.000623205 Jy ! Component: 2750 - total flux cleaned = 0.00062323 Jy ! Component: 2800 - total flux cleaned = 0.000595775 Jy ! Component: 2850 - total flux cleaned = 0.000609447 Jy ! Component: 2900 - total flux cleaned = 0.000609405 Jy ! Component: 2950 - total flux cleaned = 0.00060934 Jy ! Component: 3000 - total flux cleaned = 0.000663297 Jy ! Component: 3050 - total flux cleaned = 0.000663199 Jy ! Component: 3100 - total flux cleaned = 0.000623261 Jy ! Component: 3150 - total flux cleaned = 0.000623262 Jy ! Component: 3200 - total flux cleaned = 0.000610086 Jy ! Component: 3250 - total flux cleaned = 0.000649441 Jy ! Component: 3300 - total flux cleaned = 0.000531897 Jy ! Component: 3350 - total flux cleaned = 0.000583863 Jy ! Component: 3400 - total flux cleaned = 0.000532111 Jy ! Component: 3450 - total flux cleaned = 0.000545001 Jy ! Component: 3500 - total flux cleaned = 0.000493828 Jy ! Component: 3550 - total flux cleaned = 0.000417355 Jy ! Component: 3600 - total flux cleaned = 0.000455467 Jy ! Component: 3650 - total flux cleaned = 0.000480745 Jy ! Component: 3700 - total flux cleaned = 0.000392717 Jy ! Component: 3750 - total flux cleaned = 0.000392708 Jy ! Component: 3800 - total flux cleaned = 0.000380308 Jy ! Component: 3850 - total flux cleaned = 0.000380318 Jy ! Component: 3900 - total flux cleaned = 0.000367987 Jy ! Component: 3950 - total flux cleaned = 0.00036794 Jy ! Component: 4000 - total flux cleaned = 0.000331178 Jy ! Component: 4050 - total flux cleaned = 0.000258094 Jy ! Total flux subtracted in 4096 components = 0.000258062 Jy ! Clean residual min=-0.000700 max=0.000696 Jy/beam ! Clean residual mean=-0.000000 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.0689465 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 318 components and 0.0689464 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J0449+0729_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.03 x 2.063 at -0.07105 degrees (North through East) ! Clean map min=-0.0014487 max=0.062844 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0449+0729_X_map.fits wmodel /scr/pima/rv120_uvs/J0449+0729_X_map.mod ! Writing 318 model components to file: /scr/pima/rv120_uvs/J0449+0729_X_map.mod wobs /scr/pima/rv120_uvs/J0449+0729_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J0449+0729_X_uvs.fits wwins /scr/pima/rv120_uvs/J0449+0729_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv120_uvs/J0449+0729_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0628436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208025 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.99306 0.99306 1.98612 3.97224 7.94448 15.889 31.7779 63.5558 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.062 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 302.096 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J0449+0729_X_dfm.log closed on Fri Dec 22 22:39:46 2017