! Started logfile: /scr/pima/rv120_uvs/J0433+0521_X_dfm.log on Fri Dec 22 22:39:37 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J0433+0521_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J0433+0521_X_uva.fits ! AN table 1: 82 integrations on 21 of 21 possible baselines. ! AN table 2: 23 integrations on 36 of 36 possible baselines. ! AN table 3: 13 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.321286 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0433+0521 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4196 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0433+0521_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 316 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! A total of 81 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 316 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! A total of 81 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 316 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! A total of 81 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 316 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! A total of 81 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.577273Jy sigma=19.394255 ! Fit after self-cal, rms=0.676261Jy sigma=8.743014 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5775 mas, bmaj=0.8721 mas, bpa=-8.87 degrees ! Estimated noise=1.33984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.688523 Jy ! Component: 100 - total flux cleaned = 1.00345 Jy ! Total flux subtracted in 100 components = 1.00345 Jy ! Clean residual min=-0.062727 max=0.188018 Jy/beam ! Clean residual mean=0.000154 rms=0.014733 Jy/beam ! Combined flux in latest and established models = 1.00345 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.00345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.542192Jy sigma=6.348358 ! Fit after self-cal, rms=0.535073Jy sigma=6.292121 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (-0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210952 Jy ! Component: 100 - total flux cleaned = 0.357546 Jy ! Total flux subtracted in 100 components = 0.357546 Jy ! Clean residual min=-0.049866 max=0.127305 Jy/beam ! Clean residual mean=0.000102 rms=0.010200 Jy/beam ! Combined flux in latest and established models = 1.361 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 1.361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373168Jy sigma=4.290782 ! Fit after self-cal, rms=0.365189Jy sigma=4.191387 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (-1.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134525 Jy ! Component: 100 - total flux cleaned = 0.22307 Jy ! Total flux subtracted in 100 components = 0.22307 Jy ! Clean residual min=-0.037489 max=0.088894 Jy/beam ! Clean residual mean=0.000070 rms=0.007469 Jy/beam ! Combined flux in latest and established models = 1.58407 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 1.58407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274030Jy sigma=3.072386 ! Fit after self-cal, rms=0.267095Jy sigma=2.969759 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.081198 Jy ! Component: 100 - total flux cleaned = 0.135096 Jy ! Total flux subtracted in 100 components = 0.135096 Jy ! Clean residual min=-0.028782 max=0.060501 Jy/beam ! Clean residual mean=0.000051 rms=0.005994 Jy/beam ! Combined flux in latest and established models = 1.71917 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 1.71917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222381Jy sigma=2.412502 ! Fit after self-cal, rms=0.219596Jy sigma=2.366609 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503617 Jy ! Component: 100 - total flux cleaned = 0.0834956 Jy ! Total flux subtracted in 100 components = 0.0834956 Jy ! Clean residual min=-0.023861 max=0.043610 Jy/beam ! Clean residual mean=0.000039 rms=0.005315 Jy/beam ! Combined flux in latest and established models = 1.80266 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 1.80266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198640Jy sigma=2.108456 ! Fit after self-cal, rms=0.197403Jy sigma=2.085002 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (1.2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0370189 Jy ! Component: 100 - total flux cleaned = 0.0634095 Jy ! Total flux subtracted in 100 components = 0.0634095 Jy ! Clean residual min=-0.023853 max=0.025739 Jy/beam ! Clean residual mean=0.000030 rms=0.004918 Jy/beam ! Combined flux in latest and established models = 1.86607 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 1.86607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185304Jy sigma=1.936520 ! Fit after self-cal, rms=0.185348Jy sigma=1.935537 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.6018 mas, bmaj=1.153 mas, bpa=-13.89 degrees ! Estimated noise=1.04539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318329 Jy ! Component: 100 - total flux cleaned = 0.0530372 Jy ! Component: 150 - total flux cleaned = 0.0680482 Jy ! Component: 200 - total flux cleaned = 0.0787751 Jy ! Total flux subtracted in 200 components = 0.0787751 Jy ! Clean residual min=-0.024401 max=0.030242 Jy/beam ! Clean residual mean=0.000040 rms=0.005492 Jy/beam ! Combined flux in latest and established models = 1.94485 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 1.94485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177257Jy sigma=1.848689 ! Fit after self-cal, rms=0.177119Jy sigma=1.846240 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (-12.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281875 Jy ! Component: 100 - total flux cleaned = 0.0434646 Jy ! Component: 150 - total flux cleaned = 0.0518284 Jy ! Component: 200 - total flux cleaned = 0.0555049 Jy ! Total flux subtracted in 200 components = 0.0555049 Jy ! Clean residual min=-0.024173 max=0.022779 Jy/beam ! Clean residual mean=0.000030 rms=0.005127 Jy/beam ! Combined flux in latest and established models = 2.00035 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 2.00035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171631Jy sigma=1.780253 ! Fit after self-cal, rms=0.170792Jy sigma=1.767350 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6018 x 1.153 at -13.89 degrees (North through East) ! Clean map min=-0.022006 max=0.81543 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.94 HN 1.04 NL 1.11 NY 0.98 ! ON 0.98 SC 1.01 WZ 0.93 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.05 LA 1.01 ! NL 1.03 NY 0.96 ON 1.05 SC 0.94 ! WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 HN 1.07 KK 0.95 ! KP 1.06 LA 1.01 MK 1.13 NL 1.07 ! OV 1.02 PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.92 HN 1.02 NL 1.12 NY 0.99 ! ON 0.97 SC 1.01 WZ 0.93 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 1.08 LA 1.02 ! NL 1.03 NY 0.97 ON 1.03 SC 0.95 ! WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.99 HN 1.06 KK 0.95 ! KP 1.05 LA 1.00 MK 1.19 NL 1.06 ! OV 1.01 PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.91 HN 1.03 NL 1.14 NY 0.98 ! ON 0.97 SC 0.97 WZ 0.92 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.05 LA 1.01 ! NL 1.02 NY 0.95 ON 1.02 SC 0.91 ! WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.98 HN 1.09 KK 0.94 ! KP 1.05 LA 0.98 MK 1.14 NL 1.03 ! OV 1.00 PT 1.00 SC 0.95 ! ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.94 HN 1.06 NL 1.13 NY 0.97 ! ON 0.99 SC 0.99 WZ 0.90 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 1.08 LA 1.00 ! NL 1.05 NY 0.93 ON 1.06 SC 0.92 ! WZ 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 HN 1.03 KK 0.92 ! KP 1.05 LA 0.98 MK 1.13 NL 1.06 ! OV 0.99 PT 0.98 SC 0.94 ! ! ! Fit before self-cal, rms=0.170792Jy sigma=1.767350 ! Fit after self-cal, rms=0.150220Jy sigma=1.544963 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5888 mas, bmaj=1.08 mas, bpa=-12.79 degrees ! Estimated noise=1.12123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335699 Jy ! Component: 100 - total flux cleaned = -0.000651829 Jy ! Component: 150 - total flux cleaned = -0.00115501 Jy ! Component: 200 - total flux cleaned = -0.0013757 Jy ! Total flux subtracted in 200 components = -0.0013757 Jy ! Clean residual min=-0.013709 max=0.012884 Jy/beam ! Clean residual mean=0.000002 rms=0.003101 Jy/beam ! Combined flux in latest and established models = 1.99898 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 1.99898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148636Jy sigma=1.529048 ! Fit after self-cal, rms=0.148710Jy sigma=1.527466 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148710Jy sigma=1.527466 ! Fit after self-cal, rms=0.113783Jy sigma=1.069044 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5859 mas, bmaj=1.081 mas, bpa=-12.45 degrees ! Estimated noise=1.11796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028448 Jy ! Component: 100 - total flux cleaned = -0.00304222 Jy ! Component: 150 - total flux cleaned = -0.0030618 Jy ! Component: 200 - total flux cleaned = -0.00290257 Jy ! Total flux subtracted in 200 components = -0.00290257 Jy ! Clean residual min=-0.007000 max=0.010267 Jy/beam ! Clean residual mean=-0.000003 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 1.99607 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 1.99607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112882Jy sigma=1.058956 ! Fit after self-cal, rms=0.112907Jy sigma=1.057755 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00984036 Jy ! Component: 100 - total flux cleaned = 0.0126077 Jy ! Component: 150 - total flux cleaned = 0.0129882 Jy ! Component: 200 - total flux cleaned = 0.0128211 Jy ! Total flux subtracted in 200 components = 0.0128211 Jy ! Clean residual min=-0.006968 max=0.008359 Jy/beam ! Clean residual mean=-0.000009 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 2.00889 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 2.00889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111659Jy sigma=1.042915 ! Fit after self-cal, rms=0.111503Jy sigma=1.040297 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (-6.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0084224 Jy ! Component: 100 - total flux cleaned = 0.0112091 Jy ! Component: 150 - total flux cleaned = 0.0134843 Jy ! Component: 200 - total flux cleaned = 0.0150046 Jy ! Total flux subtracted in 200 components = 0.0150046 Jy ! Clean residual min=-0.007137 max=0.006825 Jy/beam ! Clean residual mean=-0.000014 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 2.0239 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 2.0239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110371Jy sigma=1.026875 ! Fit after self-cal, rms=0.110208Jy sigma=1.025506 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110208Jy sigma=1.025506 ! Fit after self-cal, rms=0.106536Jy sigma=0.986588 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5859 mas, bmaj=1.077 mas, bpa=-12.37 degrees ! Estimated noise=1.11973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253822 Jy ! Component: 100 - total flux cleaned = 0.00437536 Jy ! Component: 150 - total flux cleaned = 0.00521755 Jy ! Component: 200 - total flux cleaned = 0.00584674 Jy ! Total flux subtracted in 200 components = 0.00584674 Jy ! Clean residual min=-0.006481 max=0.005926 Jy/beam ! Clean residual mean=-0.000013 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 2.02975 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 123 components and 2.02975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105936Jy sigma=0.980120 ! Fit after self-cal, rms=0.105883Jy sigma=0.979311 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000845336 Jy ! Component: 100 - total flux cleaned = 0.00196306 Jy ! Component: 150 - total flux cleaned = 0.00251725 Jy ! Component: 200 - total flux cleaned = 0.0028279 Jy ! Total flux subtracted in 200 components = 0.0028279 Jy ! Clean residual min=-0.006343 max=0.005936 Jy/beam ! Clean residual mean=-0.000014 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 2.03257 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 2.03257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105583Jy sigma=0.975961 ! Fit after self-cal, rms=0.105550Jy sigma=0.975508 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105550Jy sigma=0.975508 ! Fit after self-cal, rms=0.105510Jy sigma=0.974207 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=2.376 mas, bmaj=2.625 mas, bpa=12.16 degrees ! Estimated noise=1.86256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224148 Jy ! Component: 100 - total flux cleaned = 0.00343424 Jy ! Component: 150 - total flux cleaned = 0.00442185 Jy ! Component: 200 - total flux cleaned = 0.00536992 Jy ! Total flux subtracted in 200 components = 0.00536992 Jy ! Clean residual min=-0.009792 max=0.011370 Jy/beam ! Clean residual mean=-0.000053 rms=0.002563 Jy/beam ! Combined flux in latest and established models = 2.03794 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 136 components and 2.03794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105503Jy sigma=0.978030 ! Fit after self-cal, rms=0.105441Jy sigma=0.976508 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50.8, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00940434 Jy ! Component: 100 - total flux cleaned = 0.0126648 Jy ! Component: 150 - total flux cleaned = 0.0154676 Jy ! Component: 200 - total flux cleaned = 0.0175411 Jy ! Total flux subtracted in 200 components = 0.0175411 Jy ! Clean residual min=-0.009182 max=0.010019 Jy/beam ! Clean residual mean=-0.000039 rms=0.002274 Jy/beam ! Combined flux in latest and established models = 2.05549 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 174 components and 2.05549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105098Jy sigma=0.974728 ! Fit after self-cal, rms=0.105056Jy sigma=0.973707 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5859 mas, bmaj=1.077 mas, bpa=-12.34 degrees ! Estimated noise=1.12022 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5859 x 1.077 at -12.34 degrees (North through East) ! Clean map min=-0.0067771 max=0.80288 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105056Jy sigma=0.973707 ! Fit after self-cal, rms=0.097757Jy sigma=0.883873 ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5852 mas, bmaj=1.076 mas, bpa=-12.39 degrees ! Estimated noise=1.11764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138595 Jy ! Component: 100 - total flux cleaned = 0.00278327 Jy ! Component: 150 - total flux cleaned = 0.00320992 Jy ! Component: 200 - total flux cleaned = 0.00387912 Jy ! Total flux subtracted in 200 components = 0.00387912 Jy ! Clean residual min=-0.005740 max=0.006122 Jy/beam ! Clean residual mean=-0.000011 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 2.05936 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 189 components and 2.05936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097353Jy sigma=0.876408 ! Fit after self-cal, rms=0.097349Jy sigma=0.876139 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (-2.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352441 Jy ! Component: 100 - total flux cleaned = 0.00350308 Jy ! Component: 150 - total flux cleaned = 0.00390146 Jy ! Component: 200 - total flux cleaned = 0.00415495 Jy ! Total flux subtracted in 200 components = 0.00415495 Jy ! Clean residual min=-0.005721 max=0.005121 Jy/beam ! Clean residual mean=-0.000011 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 2.06352 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 198 components and 2.06352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096851Jy sigma=0.866986 ! Fit after self-cal, rms=0.096782Jy sigma=0.866469 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096782Jy sigma=0.866469 ! Fit after self-cal, rms=0.096451Jy sigma=0.865747 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5721 mas, bmaj=0.8486 mas, bpa=-5.608 degrees ! Estimated noise=1.40487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.685861 Jy ! Component: 100 - total flux cleaned = 1.02773 Jy ! Component: 150 - total flux cleaned = 1.26274 Jy ! Component: 200 - total flux cleaned = 1.43042 Jy ! Total flux subtracted in 200 components = 1.43042 Jy ! Clean residual min=-0.032197 max=0.094046 Jy/beam ! Clean residual mean=0.000085 rms=0.007912 Jy/beam ! Combined flux in latest and established models = 1.43042 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.43042 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5854 mas, bmaj=1.076 mas, bpa=-12.35 degrees ! Estimated noise=1.11775 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.171167 Jy ! Component: 100 - total flux cleaned = 0.279035 Jy ! Component: 150 - total flux cleaned = 0.349062 Jy ! Component: 200 - total flux cleaned = 0.396873 Jy ! Total flux subtracted in 200 components = 0.396873 Jy ! Clean residual min=-0.014516 max=0.029667 Jy/beam ! Clean residual mean=0.000061 rms=0.003847 Jy/beam ! Combined flux in latest and established models = 1.82729 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 1.82729 Jy ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (0.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358275 Jy ! Component: 100 - total flux cleaned = 0.0635815 Jy ! Component: 150 - total flux cleaned = 0.0860248 Jy ! Component: 200 - total flux cleaned = 0.104396 Jy ! Total flux subtracted in 200 components = 0.104396 Jy ! Clean residual min=-0.009004 max=0.011522 Jy/beam ! Clean residual mean=0.000020 rms=0.002175 Jy/beam ! Combined flux in latest and established models = 1.93169 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 60 components and 1.93169 Jy ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (-0.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152477 Jy ! Component: 100 - total flux cleaned = 0.0279591 Jy ! Component: 150 - total flux cleaned = 0.038766 Jy ! Component: 200 - total flux cleaned = 0.0481242 Jy ! Total flux subtracted in 200 components = 0.0481242 Jy ! Clean residual min=-0.007154 max=0.008288 Jy/beam ! Clean residual mean=0.000002 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 1.97981 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 79 components and 1.97981 Jy ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Added new window around map position (-8, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00907302 Jy ! Component: 100 - total flux cleaned = 0.016673 Jy ! Component: 150 - total flux cleaned = 0.0235546 Jy ! Component: 200 - total flux cleaned = 0.0298517 Jy ! Total flux subtracted in 200 components = 0.0298517 Jy ! Clean residual min=-0.006425 max=0.006011 Jy/beam ! Clean residual mean=-0.000005 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 2.00966 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 113 components and 2.00966 Jy ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=2.376 mas, bmaj=2.623 mas, bpa=12.05 degrees ! Estimated noise=1.86085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135167 Jy ! Component: 100 - total flux cleaned = 0.0235565 Jy ! Component: 150 - total flux cleaned = 0.0316791 Jy ! Component: 200 - total flux cleaned = 0.0384694 Jy ! Total flux subtracted in 200 components = 0.0384694 Jy ! Clean residual min=-0.008785 max=0.009076 Jy/beam ! Clean residual mean=-0.000033 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 2.04813 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577767 Jy ! Component: 100 - total flux cleaned = 0.0107694 Jy ! Component: 150 - total flux cleaned = 0.0152058 Jy ! Component: 200 - total flux cleaned = 0.0188801 Jy ! Total flux subtracted in 200 components = 0.0188801 Jy ! Clean residual min=-0.007558 max=0.007751 Jy/beam ! Clean residual mean=-0.000037 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 2.06701 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 196 components and 2.06701 Jy ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! Estimated beam: bmin=0.5854 mas, bmaj=1.076 mas, bpa=-12.35 degrees ! Estimated noise=1.11775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141366 Jy ! Component: 100 - total flux cleaned = 0.00363485 Jy ! Component: 150 - total flux cleaned = 0.00555911 Jy ! Component: 200 - total flux cleaned = 0.0072384 Jy ! Total flux subtracted in 200 components = 0.0072384 Jy ! Clean residual min=-0.005424 max=0.005381 Jy/beam ! Clean residual mean=-0.000010 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 2.07425 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 222 components and 2.07425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099080Jy sigma=0.876224 ! Fit after self-cal, rms=0.098843Jy sigma=0.870229 wmodel J0433+0521_X_map.mod ! Writing 222 model components to file: J0433+0521_X_map.mod wobs J0433+0521_X_uvs.fits ! Writing UV FITS file: J0433+0521_X_uvs.fits wwins J0433+0521_X_map.win ! wwins: Wrote 12 windows to J0433+0521_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401766 Jy ! Component: 100 - total flux cleaned = -0.000584858 Jy ! Component: 150 - total flux cleaned = -0.000673655 Jy ! Component: 200 - total flux cleaned = -0.00110093 Jy ! Component: 250 - total flux cleaned = -0.0017699 Jy ! Component: 300 - total flux cleaned = -0.00193339 Jy ! Component: 350 - total flux cleaned = -0.00217556 Jy ! Component: 400 - total flux cleaned = -0.00225717 Jy ! Component: 450 - total flux cleaned = -0.00257056 Jy ! Component: 500 - total flux cleaned = -0.00287751 Jy ! Component: 550 - total flux cleaned = -0.00280281 Jy ! Component: 600 - total flux cleaned = -0.00287731 Jy ! Component: 650 - total flux cleaned = -0.00294967 Jy ! Component: 700 - total flux cleaned = -0.00302125 Jy ! Component: 750 - total flux cleaned = -0.00323511 Jy ! Component: 800 - total flux cleaned = -0.00316382 Jy ! Component: 850 - total flux cleaned = -0.00337498 Jy ! Component: 900 - total flux cleaned = -0.00358368 Jy ! Component: 950 - total flux cleaned = -0.00392737 Jy ! Component: 1000 - total flux cleaned = -0.00399504 Jy ! Component: 1050 - total flux cleaned = -0.0039281 Jy ! Component: 1100 - total flux cleaned = -0.00406176 Jy ! Component: 1150 - total flux cleaned = -0.00419466 Jy ! Component: 1200 - total flux cleaned = -0.0041286 Jy ! Component: 1250 - total flux cleaned = -0.00419335 Jy ! Component: 1300 - total flux cleaned = -0.0040646 Jy ! Component: 1350 - total flux cleaned = -0.00425743 Jy ! Component: 1400 - total flux cleaned = -0.00412994 Jy ! Component: 1450 - total flux cleaned = -0.00406696 Jy ! Component: 1500 - total flux cleaned = -0.00412942 Jy ! Component: 1550 - total flux cleaned = -0.00381942 Jy ! Component: 1600 - total flux cleaned = -0.00400467 Jy ! Component: 1650 - total flux cleaned = -0.0038827 Jy ! Component: 1700 - total flux cleaned = -0.00394283 Jy ! Component: 1750 - total flux cleaned = -0.00364129 Jy ! Component: 1800 - total flux cleaned = -0.00358216 Jy ! Component: 1850 - total flux cleaned = -0.00387989 Jy ! Component: 1900 - total flux cleaned = -0.0037614 Jy ! Component: 1950 - total flux cleaned = -0.00393759 Jy ! Component: 2000 - total flux cleaned = -0.00399559 Jy ! Component: 2050 - total flux cleaned = -0.00387946 Jy ! Component: 2100 - total flux cleaned = -0.00387927 Jy ! Component: 2150 - total flux cleaned = -0.00399382 Jy ! Component: 2200 - total flux cleaned = -0.00393688 Jy ! Component: 2250 - total flux cleaned = -0.00376738 Jy ! Component: 2300 - total flux cleaned = -0.00365493 Jy ! Component: 2350 - total flux cleaned = -0.00387819 Jy ! Component: 2400 - total flux cleaned = -0.00371183 Jy ! Component: 2450 - total flux cleaned = -0.00387736 Jy ! Component: 2500 - total flux cleaned = -0.00398727 Jy ! Component: 2550 - total flux cleaned = -0.00398691 Jy ! Component: 2600 - total flux cleaned = -0.00431185 Jy ! Component: 2650 - total flux cleaned = -0.00431186 Jy ! Component: 2700 - total flux cleaned = -0.00425828 Jy ! Component: 2750 - total flux cleaned = -0.00447203 Jy ! Component: 2800 - total flux cleaned = -0.00436576 Jy ! Component: 2850 - total flux cleaned = -0.00457727 Jy ! Component: 2900 - total flux cleaned = -0.00457729 Jy ! Component: 2950 - total flux cleaned = -0.0046297 Jy ! Component: 3000 - total flux cleaned = -0.004786 Jy ! Component: 3050 - total flux cleaned = -0.00488924 Jy ! Component: 3100 - total flux cleaned = -0.00483772 Jy ! Component: 3150 - total flux cleaned = -0.00473547 Jy ! Component: 3200 - total flux cleaned = -0.0050418 Jy ! Component: 3250 - total flux cleaned = -0.00499104 Jy ! Component: 3300 - total flux cleaned = -0.00504181 Jy ! Component: 3350 - total flux cleaned = -0.00509205 Jy ! Component: 3400 - total flux cleaned = -0.00529259 Jy ! Component: 3450 - total flux cleaned = -0.0054424 Jy ! Component: 3500 - total flux cleaned = -0.00534345 Jy ! Component: 3550 - total flux cleaned = -0.00534352 Jy ! Component: 3600 - total flux cleaned = -0.00539273 Jy ! Component: 3650 - total flux cleaned = -0.00539258 Jy ! Component: 3700 - total flux cleaned = -0.00544098 Jy ! Component: 3750 - total flux cleaned = -0.0053438 Jy ! Component: 3800 - total flux cleaned = -0.00534344 Jy ! Component: 3850 - total flux cleaned = -0.00543944 Jy ! Component: 3900 - total flux cleaned = -0.00539136 Jy ! Component: 3950 - total flux cleaned = -0.00553469 Jy ! Component: 4000 - total flux cleaned = -0.00553491 Jy ! Component: 4050 - total flux cleaned = -0.00558202 Jy ! Total flux subtracted in 4096 components = -0.00548773 Jy ! Clean residual min=-0.003360 max=0.002744 Jy/beam ! Clean residual mean=-0.000004 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 2.06876 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 539 components and 2.06876 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J0433+0521_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5854 x 1.076 at -12.35 degrees (North through East) ! Clean map min=-0.0041623 max=0.79091 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0433+0521_X_map.fits wmodel /scr/pima/rv120_uvs/J0433+0521_X_map.mod ! Writing 539 model components to file: /scr/pima/rv120_uvs/J0433+0521_X_map.mod wobs /scr/pima/rv120_uvs/J0433+0521_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J0433+0521_X_uvs.fits wwins /scr/pima/rv120_uvs/J0433+0521_X_map.win ! wwins: Wrote 13 windows to /scr/pima/rv120_uvs/J0433+0521_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.790913 invert ! Inverting map ! Your choice of large map pixels excluded 2.1% of the data. ! The y-axis pixel size should ideally be below 0.1829 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00076332 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289534 0.289534 0.579067 1.15813 2.31627 4.63254 9.26508 18.5302 37.0603 74.1206 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.79 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1036.15 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J0433+0521_X_dfm.log closed on Fri Dec 22 22:39:42 2017