! Started logfile: /scr/pima/rv120_uvs/J0230+8141_X_dfm.log on Fri Dec 22 22:39:01 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J0230+8141_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J0230+8141_X_uva.fits ! AN table 1: 87 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.980077 visibilities/baseline/integration-bin. ! Found source: J0230+8141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 5116 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0230+8141_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.999508Jy sigma=25.074397 ! Fit after self-cal, rms=0.976073Jy sigma=24.536013 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=3.452 mas, bpa=71.93 degrees ! Estimated noise=0.792192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187896 Jy ! Component: 100 - total flux cleaned = 0.0230875 Jy ! Total flux subtracted in 100 components = 0.0230875 Jy ! Clean residual min=-0.002434 max=0.002895 Jy/beam ! Clean residual mean=0.000004 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0230875 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0230875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037190Jy sigma=0.857926 ! Fit after self-cal, rms=0.035667Jy sigma=0.820263 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=4.053 mas, bpa=74.17 degrees ! Estimated noise=0.412952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333579 Jy ! Component: 100 - total flux cleaned = 0.00493585 Jy ! Component: 150 - total flux cleaned = 0.00590275 Jy ! Component: 200 - total flux cleaned = 0.00652371 Jy ! Total flux subtracted in 200 components = 0.00652371 Jy ! Clean residual min=-0.001402 max=0.001366 Jy/beam ! Clean residual mean=-0.000007 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0296112 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 38 components and 0.0296112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035313Jy sigma=0.813014 ! Fit after self-cal, rms=0.035261Jy sigma=0.812163 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.011 x 4.053 at 74.17 degrees (North through East) ! Clean map min=-0.0015148 max=0.02648 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.08 KP 0.85 LA 0.97 ! OV 1.11 PT 1.14 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.09 KP 0.92 LA 1.05 ! OV 1.05 PT 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 KP 1.01 LA 0.94 ! OV 1.01 PT 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.91 KP 0.87 LA 0.97 ! OV 1.03 PT 0.89 ! ! ! Fit before self-cal, rms=0.035261Jy sigma=0.812163 ! Fit after self-cal, rms=0.033678Jy sigma=0.807941 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=4.052 mas, bpa=74.78 degrees ! Estimated noise=0.407041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614896 Jy ! Component: 100 - total flux cleaned = 0.000797302 Jy ! Component: 150 - total flux cleaned = 0.000857993 Jy ! Component: 200 - total flux cleaned = 0.000877099 Jy ! Total flux subtracted in 200 components = 0.000877099 Jy ! Clean residual min=-0.001343 max=0.001190 Jy/beam ! Clean residual mean=-0.000004 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0304883 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0304883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.033662Jy sigma=0.807512 ! Fit after self-cal, rms=0.033699Jy sigma=0.806257 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.033699Jy sigma=0.806257 ! Fit after self-cal, rms=0.034244Jy sigma=0.803974 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=4.044 mas, bpa=74.97 degrees ! Estimated noise=0.407707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513783 Jy ! Component: 100 - total flux cleaned = 0.000713169 Jy ! Component: 150 - total flux cleaned = 0.000763956 Jy ! Component: 200 - total flux cleaned = 0.000781477 Jy ! Total flux subtracted in 200 components = 0.000781477 Jy ! Clean residual min=-0.001261 max=0.001190 Jy/beam ! Clean residual mean=-0.000003 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0312698 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.0312698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.034235Jy sigma=0.803742 ! Fit after self-cal, rms=0.034309Jy sigma=0.802939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221855 Jy ! Component: 100 - total flux cleaned = 0.000287282 Jy ! Component: 150 - total flux cleaned = 0.000304311 Jy ! Component: 200 - total flux cleaned = 0.000318718 Jy ! Total flux subtracted in 200 components = 0.000318718 Jy ! Clean residual min=-0.001214 max=0.001100 Jy/beam ! Clean residual mean=-0.000003 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0315885 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.0315885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.034302Jy sigma=0.802801 ! Fit after self-cal, rms=0.034299Jy sigma=0.802744 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.034299Jy sigma=0.802744 ! Fit after self-cal, rms=0.041305Jy sigma=0.804897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=3.982 mas, bpa=74.62 degrees ! Estimated noise=0.42223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095684 Jy ! Component: 100 - total flux cleaned = 0.00141541 Jy ! Component: 150 - total flux cleaned = 0.0017127 Jy ! Component: 200 - total flux cleaned = 0.00189994 Jy ! Total flux subtracted in 200 components = 0.00189994 Jy ! Clean residual min=-0.001224 max=0.001220 Jy/beam ! Clean residual mean=0.000004 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0334884 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.0334884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041239Jy sigma=0.804599 ! Fit after self-cal, rms=0.041472Jy sigma=0.803873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219436 Jy ! Component: 100 - total flux cleaned = 0.000276517 Jy ! Component: 150 - total flux cleaned = 0.000312534 Jy ! Component: 200 - total flux cleaned = 0.000344291 Jy ! Total flux subtracted in 200 components = 0.000344291 Jy ! Clean residual min=-0.001152 max=0.001191 Jy/beam ! Clean residual mean=0.000003 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0338327 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.0338327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041465Jy sigma=0.803831 ! Fit after self-cal, rms=0.041465Jy sigma=0.803812 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041465Jy sigma=0.803812 ! Fit after self-cal, rms=0.041057Jy sigma=0.803424 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=4.266 mas, bpa=73.27 degrees ! Estimated noise=0.441079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773304 Jy ! Component: 100 - total flux cleaned = 0.00116991 Jy ! Component: 150 - total flux cleaned = 0.00144666 Jy ! Component: 200 - total flux cleaned = 0.00164235 Jy ! Total flux subtracted in 200 components = 0.00164235 Jy ! Clean residual min=-0.001251 max=0.001290 Jy/beam ! Clean residual mean=0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0354751 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.0354751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041025Jy sigma=0.803222 ! Fit after self-cal, rms=0.041025Jy sigma=0.803066 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276856 Jy ! Component: 100 - total flux cleaned = 0.000373585 Jy ! Component: 150 - total flux cleaned = 0.000397914 Jy ! Component: 200 - total flux cleaned = 0.000419489 Jy ! Total flux subtracted in 200 components = 0.000419489 Jy ! Clean residual min=-0.001203 max=0.001282 Jy/beam ! Clean residual mean=0.000002 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0358945 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.0358945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041020Jy sigma=0.803055 ! Fit after self-cal, rms=0.041019Jy sigma=0.803039 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=3.945 mas, bpa=74.66 degrees ! Estimated noise=0.432017 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 3.945 at 74.66 degrees (North through East) ! Clean map min=-0.0011902 max=0.027451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=3.366 mas, bpa=72.88 degrees ! Estimated noise=0.809245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201649 Jy ! Component: 100 - total flux cleaned = 0.0254496 Jy ! Component: 150 - total flux cleaned = 0.0287477 Jy ! Component: 200 - total flux cleaned = 0.0312171 Jy ! Total flux subtracted in 200 components = 0.0312171 Jy ! Clean residual min=-0.002831 max=0.002363 Jy/beam ! Clean residual mean=0.000004 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0312171 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0312171 Jy ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=3.945 mas, bpa=74.66 degrees ! Estimated noise=0.432017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209671 Jy ! Component: 100 - total flux cleaned = 0.0031372 Jy ! Component: 150 - total flux cleaned = 0.00367772 Jy ! Component: 200 - total flux cleaned = 0.00392522 Jy ! Total flux subtracted in 200 components = 0.00392522 Jy ! Clean residual min=-0.001289 max=0.001224 Jy/beam ! Clean residual mean=0.000002 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0351423 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 66 components and 0.0351423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=4.266 mas, bpa=73.27 degrees ! Estimated noise=0.441079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027733 Jy ! Component: 100 - total flux cleaned = 0.000399979 Jy ! Component: 150 - total flux cleaned = 0.000495282 Jy ! Component: 200 - total flux cleaned = 0.000569688 Jy ! Total flux subtracted in 200 components = 0.000569688 Jy ! Clean residual min=-0.001234 max=0.001291 Jy/beam ! Clean residual mean=0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.035712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29781e-05 Jy ! Component: 100 - total flux cleaned = 4.44995e-05 Jy ! Component: 150 - total flux cleaned = 6.44702e-05 Jy ! Component: 200 - total flux cleaned = 8.30866e-05 Jy ! Total flux subtracted in 200 components = 8.30866e-05 Jy ! Clean residual min=-0.001225 max=0.001284 Jy/beam ! Clean residual mean=0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0357951 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 0.0357951 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=3.945 mas, bpa=74.66 degrees ! Estimated noise=0.432017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.23428e-06 Jy ! Component: 100 - total flux cleaned = 1.75033e-06 Jy ! Component: 150 - total flux cleaned = -2.73579e-06 Jy ! Component: 200 - total flux cleaned = 5.49005e-06 Jy ! Total flux subtracted in 200 components = 5.49005e-06 Jy ! Clean residual min=-0.001234 max=0.001208 Jy/beam ! Clean residual mean=0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0358006 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.0358006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041024Jy sigma=0.803145 ! Fit after self-cal, rms=0.041025Jy sigma=0.803095 wmodel J0230+8141_X_map.mod ! Writing 85 model components to file: J0230+8141_X_map.mod wobs J0230+8141_X_uvs.fits ! Writing UV FITS file: J0230+8141_X_uvs.fits wwins J0230+8141_X_map.win ! wwins: Wrote 1 windows to J0230+8141_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.38806e-05 Jy ! Component: 100 - total flux cleaned = 0.000188089 Jy ! Component: 150 - total flux cleaned = 0.000385407 Jy ! Component: 200 - total flux cleaned = 0.000591895 Jy ! Component: 250 - total flux cleaned = 0.000771361 Jy ! Component: 300 - total flux cleaned = 0.000926773 Jy ! Component: 350 - total flux cleaned = 0.000993866 Jy ! Component: 400 - total flux cleaned = 0.00107509 Jy ! Component: 450 - total flux cleaned = 0.00109094 Jy ! Component: 500 - total flux cleaned = 0.00113733 Jy ! Component: 550 - total flux cleaned = 0.00115249 Jy ! Component: 600 - total flux cleaned = 0.00115261 Jy ! Component: 650 - total flux cleaned = 0.00122464 Jy ! Component: 700 - total flux cleaned = 0.00129494 Jy ! Component: 750 - total flux cleaned = 0.00136357 Jy ! Component: 800 - total flux cleaned = 0.00143081 Jy ! Component: 850 - total flux cleaned = 0.00148369 Jy ! Component: 900 - total flux cleaned = 0.00153553 Jy ! Component: 950 - total flux cleaned = 0.00161172 Jy ! Component: 1000 - total flux cleaned = 0.00163668 Jy ! Component: 1050 - total flux cleaned = 0.00168615 Jy ! Component: 1100 - total flux cleaned = 0.00174667 Jy ! Component: 1150 - total flux cleaned = 0.00175842 Jy ! Component: 1200 - total flux cleaned = 0.00182893 Jy ! Component: 1250 - total flux cleaned = 0.00189835 Jy ! Component: 1300 - total flux cleaned = 0.00192112 Jy ! Component: 1350 - total flux cleaned = 0.00195494 Jy ! Component: 1400 - total flux cleaned = 0.00198845 Jy ! Component: 1450 - total flux cleaned = 0.00203215 Jy ! Component: 1500 - total flux cleaned = 0.00209692 Jy ! Component: 1550 - total flux cleaned = 0.00212876 Jy ! Component: 1600 - total flux cleaned = 0.00218128 Jy ! Component: 1650 - total flux cleaned = 0.00221233 Jy ! Component: 1700 - total flux cleaned = 0.0022636 Jy ! Component: 1750 - total flux cleaned = 0.00232448 Jy ! Component: 1800 - total flux cleaned = 0.0023546 Jy ! Component: 1850 - total flux cleaned = 0.00243386 Jy ! Component: 1900 - total flux cleaned = 0.00248265 Jy ! Component: 1950 - total flux cleaned = 0.00252117 Jy ! Component: 2000 - total flux cleaned = 0.00255 Jy ! Component: 2050 - total flux cleaned = 0.00261627 Jy ! Component: 2100 - total flux cleaned = 0.00267229 Jy ! Component: 2150 - total flux cleaned = 0.00269995 Jy ! Component: 2200 - total flux cleaned = 0.00276398 Jy ! Component: 2250 - total flux cleaned = 0.00279115 Jy ! Component: 2300 - total flux cleaned = 0.00283593 Jy ! Component: 2350 - total flux cleaned = 0.00287132 Jy ! Component: 2400 - total flux cleaned = 0.00289764 Jy ! Component: 2450 - total flux cleaned = 0.00294095 Jy ! Component: 2500 - total flux cleaned = 0.00299246 Jy ! Component: 2550 - total flux cleaned = 0.00301804 Jy ! Component: 2600 - total flux cleaned = 0.00306861 Jy ! Component: 2650 - total flux cleaned = 0.00312697 Jy ! Component: 2700 - total flux cleaned = 0.00315999 Jy ! Component: 2750 - total flux cleaned = 0.00317633 Jy ! Component: 2800 - total flux cleaned = 0.00320076 Jy ! Component: 2850 - total flux cleaned = 0.00320084 Jy ! Component: 2900 - total flux cleaned = 0.00323275 Jy ! Component: 2950 - total flux cleaned = 0.00323277 Jy ! Component: 3000 - total flux cleaned = 0.00324858 Jy ! Component: 3050 - total flux cleaned = 0.00326413 Jy ! Component: 3100 - total flux cleaned = 0.00327962 Jy ! Component: 3150 - total flux cleaned = 0.00325649 Jy ! Component: 3200 - total flux cleaned = 0.00327942 Jy ! Component: 3250 - total flux cleaned = 0.00327942 Jy ! Component: 3300 - total flux cleaned = 0.00325691 Jy ! Component: 3350 - total flux cleaned = 0.00327183 Jy ! Component: 3400 - total flux cleaned = 0.00327185 Jy ! Component: 3450 - total flux cleaned = 0.0032792 Jy ! Component: 3500 - total flux cleaned = 0.00327187 Jy ! Component: 3550 - total flux cleaned = 0.00328642 Jy ! Component: 3600 - total flux cleaned = 0.00327195 Jy ! Component: 3650 - total flux cleaned = 0.00327915 Jy ! Component: 3700 - total flux cleaned = 0.00327212 Jy ! Component: 3750 - total flux cleaned = 0.00330046 Jy ! Component: 3800 - total flux cleaned = 0.00328639 Jy ! Component: 3850 - total flux cleaned = 0.00329334 Jy ! Component: 3900 - total flux cleaned = 0.00330028 Jy ! Component: 3950 - total flux cleaned = 0.00330029 Jy ! Component: 4000 - total flux cleaned = 0.0033071 Jy ! Component: 4050 - total flux cleaned = 0.00330707 Jy ! Total flux subtracted in 4096 components = 0.00330031 Jy ! Clean residual min=-0.000377 max=0.000398 Jy/beam ! Clean residual mean=-0.000000 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.0391009 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 411 components and 0.0391009 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J0230+8141_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 3.945 at 74.66 degrees (North through East) ! Clean map min=-0.00079621 max=0.027391 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0230+8141_X_map.fits wmodel /scr/pima/rv120_uvs/J0230+8141_X_map.mod ! Writing 411 model components to file: /scr/pima/rv120_uvs/J0230+8141_X_map.mod wobs /scr/pima/rv120_uvs/J0230+8141_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J0230+8141_X_uvs.fits wwins /scr/pima/rv120_uvs/J0230+8141_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv120_uvs/J0230+8141_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.027391 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135618 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48536 1.48536 2.97072 5.94145 11.8829 23.7658 47.5316 95.0632 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.027 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 201.97 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J0230+8141_X_dfm.log closed on Fri Dec 22 22:39:06 2017