! Started logfile: /scr/pima/rv120_uvs/J0221+355A_S_dfm.log on Fri Dec 22 22:29:41 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv120_uvs/J0221+355A_S_uva.fits
! Reading UV FITS file: /scr/pima/rv120_uvs/J0221+355A_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.777778 visibilities/baseline/integration-bin.
! Found source: J0221+355A
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 6160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0221+355A_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 132 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007891Jy  sigma=23.661036
! Fit after  self-cal, rms=0.907146Jy  sigma=21.252859
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.03 mas, bmaj=6.659 mas, bpa=24.04 degrees
! Estimated noise=0.735626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0629566 Jy
! Component: 100  -  total flux cleaned = 0.0894595 Jy
! Total flux subtracted in 100 components = 0.0894595 Jy
! Clean residual min=-0.013573 max=0.015601 Jy/beam
! Clean residual mean=-0.000051 rms=0.003630 Jy/beam
! Combined flux in latest and established models = 0.0894596 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0894596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124765Jy  sigma=2.731841
! Fit after  self-cal, rms=0.123681Jy  sigma=2.709901
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.843 mas, bmaj=7.354 mas, bpa=21.78 degrees
! Estimated noise=0.419599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0352968 Jy
! Component: 100  -  total flux cleaned = 0.0589865 Jy
! Component: 150  -  total flux cleaned = 0.0756667 Jy
! Component: 200  -  total flux cleaned = 0.0875167 Jy
! Total flux subtracted in 200 components = 0.0875167 Jy
! Clean residual min=-0.013979 max=0.019707 Jy/beam
! Clean residual mean=-0.000124 rms=0.004911 Jy/beam
! Combined flux in latest and established models = 0.176976 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 72 components and 0.176976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109869Jy  sigma=2.401214
! Fit after  self-cal, rms=0.108684Jy  sigma=2.380378
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.843 x 7.354 at 21.78 degrees (North through East)
! Clean map  min=-0.014412  max=0.095312 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.48     FD        0.82     HN        1.26     KP        0.79     
!   LA        0.77     MK        1.08     NL        1.16     OV        1.50     
!   PT        0.93     SC        1.20     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.33     FD        0.72     HN        1.34     KP        0.96     
!   LA        0.81     MK        0.94     NL        0.91     OV        1.35     
!   PT        0.93     SC        1.36     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.94     HN        0.90     KP        1.00*    
!   LA        0.79     MK        0.78     NL        1.00*    OV        0.96     
!   PT        0.77     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.31     FD        0.81     HN        1.28     KP        1.19     
!   LA        0.62     MK        0.92     NL        1.03     OV        1.27     
!   PT        0.86     SC        1.27     
! 
! 
! Fit before self-cal, rms=0.108684Jy  sigma=2.380378
! Fit after  self-cal, rms=0.112967Jy  sigma=2.209294
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.019 mas, bmaj=7.792 mas, bpa=21.15 degrees
! Estimated noise=0.427317 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021779 Jy
! Component: 100  -  total flux cleaned = 0.00242404 Jy
! Component: 150  -  total flux cleaned = 0.00256146 Jy
! Component: 200  -  total flux cleaned = 0.00262215 Jy
! Total flux subtracted in 200 components = 0.00262215 Jy
! Clean residual min=-0.011470 max=0.018492 Jy/beam
! Clean residual mean=-0.000047 rms=0.004091 Jy/beam
! Combined flux in latest and established models = 0.179598 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 77 components and 0.179598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112845Jy  sigma=2.206727
! Fit after  self-cal, rms=0.114540Jy  sigma=2.186540
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114540Jy  sigma=2.186540
! Fit after  self-cal, rms=0.142056Jy  sigma=2.074211
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.048 mas, bmaj=7.592 mas, bpa=22.02 degrees
! Estimated noise=0.433306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168606 Jy
! Component: 100  -  total flux cleaned = 0.0022123 Jy
! Component: 150  -  total flux cleaned = 0.00249631 Jy
! Component: 200  -  total flux cleaned = 0.00268169 Jy
! Total flux subtracted in 200 components = 0.00268169 Jy
! Clean residual min=-0.011632 max=0.015326 Jy/beam
! Clean residual mean=-0.000008 rms=0.003737 Jy/beam
! Combined flux in latest and established models = 0.18228 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 83 components and 0.18228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141938Jy  sigma=2.071458
! Fit after  self-cal, rms=0.143014Jy  sigma=2.065586
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124222 Jy
! Component: 100  -  total flux cleaned = 6.53279e-05 Jy
! Component: 150  -  total flux cleaned = -3.1558e-05 Jy
! Component: 200  -  total flux cleaned = -3.03889e-05 Jy
! Total flux subtracted in 200 components = -3.03889e-05 Jy
! Clean residual min=-0.011347 max=0.014897 Jy/beam
! Clean residual mean=-0.000009 rms=0.003745 Jy/beam
! Combined flux in latest and established models = 0.18225 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 88 components and 0.18225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142949Jy  sigma=2.064544
! Fit after  self-cal, rms=0.143035Jy  sigma=2.064126
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143035Jy  sigma=2.064126
! Fit after  self-cal, rms=0.157589Jy  sigma=2.062701
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.097 mas, bmaj=7.43 mas, bpa=21.51 degrees
! Estimated noise=0.435404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00295376 Jy
! Component: 100  -  total flux cleaned = 0.00343424 Jy
! Component: 150  -  total flux cleaned = 0.0036073 Jy
! Component: 200  -  total flux cleaned = 0.00381378 Jy
! Total flux subtracted in 200 components = 0.00381378 Jy
! Clean residual min=-0.011490 max=0.014751 Jy/beam
! Clean residual mean=-0.000007 rms=0.003742 Jy/beam
! Combined flux in latest and established models = 0.186064 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.186064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157501Jy  sigma=2.060613
! Fit after  self-cal, rms=0.157984Jy  sigma=2.059664
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000463299 Jy
! Component: 100  -  total flux cleaned = 0.00040714 Jy
! Component: 150  -  total flux cleaned = 0.000317822 Jy
! Component: 200  -  total flux cleaned = 0.00035741 Jy
! Total flux subtracted in 200 components = 0.00035741 Jy
! Clean residual min=-0.011412 max=0.014643 Jy/beam
! Clean residual mean=-0.000008 rms=0.003736 Jy/beam
! Combined flux in latest and established models = 0.186421 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 0.186421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157921Jy  sigma=2.058987
! Fit after  self-cal, rms=0.158001Jy  sigma=2.058576
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158001Jy  sigma=2.058576
! Fit after  self-cal, rms=0.160024Jy  sigma=2.057484
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.919 mas, bmaj=9.227 mas, bpa=2.092 degrees
! Estimated noise=0.481711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478811 Jy
! Component: 100  -  total flux cleaned = 0.00677547 Jy
! Component: 150  -  total flux cleaned = 0.00696 Jy
! Component: 200  -  total flux cleaned = 0.00713033 Jy
! Total flux subtracted in 200 components = 0.00713033 Jy
! Clean residual min=-0.017415 max=0.021576 Jy/beam
! Clean residual mean=-0.000002 rms=0.005816 Jy/beam
! Combined flux in latest and established models = 0.193551 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 99 components and 0.193551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160051Jy  sigma=2.058787
! Fit after  self-cal, rms=0.160139Jy  sigma=2.057898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000342522 Jy
! Component: 100  -  total flux cleaned = 0.000569505 Jy
! Component: 150  -  total flux cleaned = 0.0007224 Jy
! Component: 200  -  total flux cleaned = 0.000864598 Jy
! Total flux subtracted in 200 components = 0.000864598 Jy
! Clean residual min=-0.017422 max=0.021447 Jy/beam
! Clean residual mean=-0.000001 rms=0.005776 Jy/beam
! Combined flux in latest and established models = 0.194416 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 102 components and 0.194416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160168Jy  sigma=2.059342
! Fit after  self-cal, rms=0.160166Jy  sigma=2.058818
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=7.324 mas, bpa=21.29 degrees
! Estimated noise=0.436657 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.125 x 7.324 at 21.29 degrees (North through East)
! Clean map  min=-0.011431  max=0.095057 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=6.531 mas, bpa=23.13 degrees
! Estimated noise=0.808408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0664457 Jy
! Component: 100  -  total flux cleaned = 0.0959669 Jy
! Component: 150  -  total flux cleaned = 0.115959 Jy
! Component: 200  -  total flux cleaned = 0.130762 Jy
! Total flux subtracted in 200 components = 0.130762 Jy
! Clean residual min=-0.014025 max=0.015963 Jy/beam
! Clean residual mean=-0.000027 rms=0.003499 Jy/beam
! Combined flux in latest and established models = 0.130762 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.130762 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=7.324 mas, bpa=21.29 degrees
! Estimated noise=0.436657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204588 Jy
! Component: 100  -  total flux cleaned = 0.0334849 Jy
! Component: 150  -  total flux cleaned = 0.042051 Jy
! Component: 200  -  total flux cleaned = 0.0477156 Jy
! Total flux subtracted in 200 components = 0.0477156 Jy
! Clean residual min=-0.012496 max=0.014531 Jy/beam
! Clean residual mean=-0.000023 rms=0.003778 Jy/beam
! Combined flux in latest and established models = 0.178478 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 67 components and 0.178478 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.919 mas, bmaj=9.227 mas, bpa=2.092 degrees
! Estimated noise=0.481711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00834758 Jy
! Component: 100  -  total flux cleaned = 0.0123867 Jy
! Component: 150  -  total flux cleaned = 0.0142681 Jy
! Component: 200  -  total flux cleaned = 0.0145457 Jy
! Total flux subtracted in 200 components = 0.0145457 Jy
! Clean residual min=-0.017479 max=0.021402 Jy/beam
! Clean residual mean=-0.000003 rms=0.005777 Jy/beam
! Combined flux in latest and established models = 0.193023 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152872 Jy
! Component: 100  -  total flux cleaned = 0.000250371 Jy
! Component: 150  -  total flux cleaned = 0.000345514 Jy
! Component: 200  -  total flux cleaned = 0.000484056 Jy
! Total flux subtracted in 200 components = 0.000484056 Jy
! Clean residual min=-0.017469 max=0.021409 Jy/beam
! Clean residual mean=-0.000002 rms=0.005773 Jy/beam
! Combined flux in latest and established models = 0.193507 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 0.193507 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=7.324 mas, bpa=21.29 degrees
! Estimated noise=0.436657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00343015 Jy
! Component: 100  -  total flux cleaned = -0.00414819 Jy
! Component: 150  -  total flux cleaned = -0.00414288 Jy
! Component: 200  -  total flux cleaned = -0.00413962 Jy
! Total flux subtracted in 200 components = -0.00413962 Jy
! Clean residual min=-0.011895 max=0.014798 Jy/beam
! Clean residual mean=-0.000010 rms=0.003735 Jy/beam
! Combined flux in latest and established models = 0.189368 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 77 components and 0.189368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160247Jy  sigma=2.057693
! Fit after  self-cal, rms=0.160369Jy  sigma=2.056236
wmodel J0221+355A_S_map.mod
! Writing 77 model components to file: J0221+355A_S_map.mod
wobs   J0221+355A_S_uvs.fits
! Writing UV FITS file: J0221+355A_S_uvs.fits
wwins  J0221+355A_S_map.win
! wwins: Wrote 1 windows to J0221+355A_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00665539 Jy
! Component: 100  -  total flux cleaned = 0.0126003 Jy
! Component: 150  -  total flux cleaned = 0.0176571 Jy
! Component: 200  -  total flux cleaned = 0.0209854 Jy
! Component: 250  -  total flux cleaned = 0.023577 Jy
! Component: 300  -  total flux cleaned = 0.0260786 Jy
! Component: 350  -  total flux cleaned = 0.0284993 Jy
! Component: 400  -  total flux cleaned = 0.0312025 Jy
! Component: 450  -  total flux cleaned = 0.0336518 Jy
! Component: 500  -  total flux cleaned = 0.0360375 Jy
! Component: 550  -  total flux cleaned = 0.0386956 Jy
! Component: 600  -  total flux cleaned = 0.0409666 Jy
! Component: 650  -  total flux cleaned = 0.0436597 Jy
! Component: 700  -  total flux cleaned = 0.0461373 Jy
! Component: 750  -  total flux cleaned = 0.0479599 Jy
! Component: 800  -  total flux cleaned = 0.0500411 Jy
! Component: 850  -  total flux cleaned = 0.0520807 Jy
! Component: 900  -  total flux cleaned = 0.0540801 Jy
! Component: 950  -  total flux cleaned = 0.0560452 Jy
! Component: 1000  -  total flux cleaned = 0.0578342 Jy
! Component: 1050  -  total flux cleaned = 0.0597275 Jy
! Component: 1100  -  total flux cleaned = 0.0615886 Jy
! Component: 1150  -  total flux cleaned = 0.0631565 Jy
! Component: 1200  -  total flux cleaned = 0.0648274 Jy
! Component: 1250  -  total flux cleaned = 0.0663473 Jy
! Component: 1300  -  total flux cleaned = 0.0678418 Jy
! Component: 1350  -  total flux cleaned = 0.0690702 Jy
! Component: 1400  -  total flux cleaned = 0.0704033 Jy
! Component: 1450  -  total flux cleaned = 0.071121 Jy
! Component: 1500  -  total flux cleaned = 0.0718304 Jy
! Component: 1550  -  total flux cleaned = 0.0725294 Jy
! Component: 1600  -  total flux cleaned = 0.0732204 Jy
! Component: 1650  -  total flux cleaned = 0.0733329 Jy
! Component: 1700  -  total flux cleaned = 0.0742354 Jy
! Component: 1750  -  total flux cleaned = 0.0742361 Jy
! Component: 1800  -  total flux cleaned = 0.0752269 Jy
! Component: 1850  -  total flux cleaned = 0.075663 Jy
! Component: 1900  -  total flux cleaned = 0.0763094 Jy
! Component: 1950  -  total flux cleaned = 0.076843 Jy
! Component: 2000  -  total flux cleaned = 0.0773699 Jy
! Component: 2050  -  total flux cleaned = 0.0775793 Jy
! Component: 2100  -  total flux cleaned = 0.0779928 Jy
! Component: 2150  -  total flux cleaned = 0.0786072 Jy
! Component: 2200  -  total flux cleaned = 0.0790123 Jy
! Component: 2250  -  total flux cleaned = 0.0794143 Jy
! Component: 2300  -  total flux cleaned = 0.0799118 Jy
! Component: 2350  -  total flux cleaned = 0.0803066 Jy
! Component: 2400  -  total flux cleaned = 0.0805017 Jy
! Component: 2450  -  total flux cleaned = 0.0811802 Jy
! Component: 2500  -  total flux cleaned = 0.0812761 Jy
! Component: 2550  -  total flux cleaned = 0.0818488 Jy
! Component: 2600  -  total flux cleaned = 0.0824146 Jy
! Component: 2650  -  total flux cleaned = 0.0825998 Jy
! Component: 2700  -  total flux cleaned = 0.0831569 Jy
! Component: 2750  -  total flux cleaned = 0.0836171 Jy
! Component: 2800  -  total flux cleaned = 0.0839816 Jy
! Component: 2850  -  total flux cleaned = 0.0844355 Jy
! Component: 2900  -  total flux cleaned = 0.0849763 Jy
! Component: 2950  -  total flux cleaned = 0.0853344 Jy
! Component: 3000  -  total flux cleaned = 0.0858672 Jy
! Component: 3050  -  total flux cleaned = 0.0863962 Jy
! Component: 3100  -  total flux cleaned = 0.087097 Jy
! Component: 3150  -  total flux cleaned = 0.087444 Jy
! Component: 3200  -  total flux cleaned = 0.0879606 Jy
! Component: 3250  -  total flux cleaned = 0.088217 Jy
! Component: 3300  -  total flux cleaned = 0.0883878 Jy
! Component: 3350  -  total flux cleaned = 0.0890649 Jy
! Component: 3400  -  total flux cleaned = 0.0894008 Jy
! Component: 3450  -  total flux cleaned = 0.089818 Jy
! Component: 3500  -  total flux cleaned = 0.0899836 Jy
! Component: 3550  -  total flux cleaned = 0.0903131 Jy
! Component: 3600  -  total flux cleaned = 0.0906408 Jy
! Component: 3650  -  total flux cleaned = 0.0909658 Jy
! Component: 3700  -  total flux cleaned = 0.0912889 Jy
! Component: 3750  -  total flux cleaned = 0.0920117 Jy
! Component: 3800  -  total flux cleaned = 0.0920112 Jy
! Component: 3850  -  total flux cleaned = 0.0923285 Jy
! Component: 3900  -  total flux cleaned = 0.0927223 Jy
! Component: 3950  -  total flux cleaned = 0.093193 Jy
! Component: 4000  -  total flux cleaned = 0.0937384 Jy
! Component: 4050  -  total flux cleaned = 0.0938926 Jy
! Total flux subtracted in 4096 components = 0.0941237 Jy
! Clean residual min=-0.004337 max=0.004029 Jy/beam
! Clean residual mean=-0.000015 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 0.283492 Jy
keep
! Adding 362 model components to the UV plane model.
! The established model now contains 439 components and 0.283491 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv120_uvs/J0221+355A_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.125 x 7.324 at 21.29 degrees (North through East)
! Clean map  min=-0.0090822  max=0.096108 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0221+355A_S_map.fits
wmodel /scr/pima/rv120_uvs/J0221+355A_S_map.mod
! Writing 439 model components to file: /scr/pima/rv120_uvs/J0221+355A_S_map.mod
wobs   /scr/pima/rv120_uvs/J0221+355A_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv120_uvs/J0221+355A_S_uvs.fits
wwins  /scr/pima/rv120_uvs/J0221+355A_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv120_uvs/J0221+355A_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0961079 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00150866 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.70926 4.70926 9.41853 18.8371 37.6741 75.3482
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0045 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  63.704 
quit
! Quitting program
! Log file /scr/pima/rv120_uvs/J0221+355A_S_dfm.log closed on Fri Dec 22 22:29:46 2017