! Started logfile: /scr/pima/rv120_uvs/J0217+7349_X_dfm.log on Fri Dec 22 22:38:36 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J0217+7349_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J0217+7349_X_uva.fits ! AN table 1: 19 integrations on 55 of 55 possible baselines. ! AN table 2: 23 integrations on 36 of 36 possible baselines. ! AN table 3: 3 integrations on 10 of 10 possible baselines. ! AN table 4: 7 integrations on 15 of 15 possible baselines. ! AN table 5: 17 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.345906 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0217+7349 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4072 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0217+7349_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 141 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 141 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 141 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 141 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.875904Jy sigma=22.123316 ! Fit after self-cal, rms=0.771590Jy sigma=8.840085 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.6389 mas, bmaj=0.8399 mas, bpa=-76.74 degrees ! Estimated noise=1.41116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.955422 Jy ! Component: 100 - total flux cleaned = 1.32138 Jy ! Total flux subtracted in 100 components = 1.32138 Jy ! Clean residual min=-0.055648 max=0.260935 Jy/beam ! Clean residual mean=-0.000017 rms=0.014584 Jy/beam ! Combined flux in latest and established models = 1.32138 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.32138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570779Jy sigma=6.507991 ! Fit after self-cal, rms=0.568466Jy sigma=6.492354 ! Inverting map ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Added new window around map position (1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26935 Jy ! Component: 100 - total flux cleaned = 0.42895 Jy ! Total flux subtracted in 100 components = 0.42895 Jy ! Clean residual min=-0.037427 max=0.100302 Jy/beam ! Clean residual mean=-0.000015 rms=0.008628 Jy/beam ! Combined flux in latest and established models = 1.75033 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 1.75033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321845Jy sigma=3.670989 ! Fit after self-cal, rms=0.309211Jy sigma=3.507950 ! Inverting map ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123414 Jy ! Component: 100 - total flux cleaned = 0.200952 Jy ! Total flux subtracted in 100 components = 0.200952 Jy ! Clean residual min=-0.032068 max=0.052572 Jy/beam ! Clean residual mean=-0.000015 rms=0.005983 Jy/beam ! Combined flux in latest and established models = 1.95128 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 1.95128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213862Jy sigma=2.445400 ! Fit after self-cal, rms=0.209418Jy sigma=2.375636 ! Inverting map ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0662439 Jy ! Component: 100 - total flux cleaned = 0.106941 Jy ! Total flux subtracted in 100 components = 0.106941 Jy ! Clean residual min=-0.029544 max=0.039734 Jy/beam ! Clean residual mean=-0.000015 rms=0.004954 Jy/beam ! Combined flux in latest and established models = 2.05822 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 2.05822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172271Jy sigma=1.982858 ! Fit after self-cal, rms=0.170178Jy sigma=1.941610 ! Inverting map ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Added new window around map position (2.4, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434347 Jy ! Component: 100 - total flux cleaned = 0.0710858 Jy ! Total flux subtracted in 100 components = 0.0710858 Jy ! Clean residual min=-0.027332 max=0.029559 Jy/beam ! Clean residual mean=-0.000015 rms=0.004399 Jy/beam ! Combined flux in latest and established models = 2.1293 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 2.1293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152863Jy sigma=1.764251 ! Fit after self-cal, rms=0.151585Jy sigma=1.743047 ! Inverting map ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Added new window around map position (2.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289121 Jy ! Component: 100 - total flux cleaned = 0.0479005 Jy ! Total flux subtracted in 100 components = 0.0479005 Jy ! Clean residual min=-0.025280 max=0.025058 Jy/beam ! Clean residual mean=-0.000016 rms=0.004136 Jy/beam ! Combined flux in latest and established models = 2.1772 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 2.1772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143308Jy sigma=1.659145 ! Fit after self-cal, rms=0.142580Jy sigma=1.647398 ! Inverting map ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8339 mas, bmaj=1.047 mas, bpa=-54.34 degrees ! Estimated noise=1.08016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235458 Jy ! Component: 100 - total flux cleaned = 0.0358207 Jy ! Component: 150 - total flux cleaned = 0.0394322 Jy ! Component: 200 - total flux cleaned = 0.0416092 Jy ! Total flux subtracted in 200 components = 0.0416092 Jy ! Clean residual min=-0.024482 max=0.018910 Jy/beam ! Clean residual mean=-0.000047 rms=0.004255 Jy/beam ! Combined flux in latest and established models = 2.21881 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 2.21881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138252Jy sigma=1.601672 ! Fit after self-cal, rms=0.137374Jy sigma=1.587537 ! Inverting map ! Your choice of large map pixels excluded 0.504% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8339 x 1.047 at -54.34 degrees (North through East) ! Clean map min=-0.025422 max=1.2611 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 0.97 KP 0.98 ! LA 0.99 NL 1.00 NY 1.03 ON 1.01 ! OV 1.04 PT 1.03 SC 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 KK 1.07 KP 1.02 ! LA 0.98 MK 0.91 NL 0.97 OV 1.00 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 MK 0.98 ON 0.99 OV 1.04 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! KK 1.10 MK 0.94 NY 0.94 ON 0.98 ! OV 1.06 WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.01 HN 1.01 KK 0.98 ! KP 1.00 LA 0.98 NL 0.99 NY 0.94 ! ON 0.99 OV 1.02 PT 1.00 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.94 KP 0.97 ! LA 1.00 NL 0.99 NY 1.06 ON 1.00 ! OV 1.05 PT 1.03 SC 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KK 1.05 KP 1.00 ! LA 0.99 MK 0.91 NL 0.99 OV 1.00 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 MK 1.00 ON 1.00 OV 1.07 ! WZ 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! KK 1.01 MK 0.98 NY 0.96 ON 0.94 ! OV 1.06 WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.00 HN 1.07 KK 1.03 ! KP 0.99 LA 0.99 NL 1.00 NY 0.96 ! ON 0.98 OV 1.02 PT 0.99 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.93 KP 0.97 ! LA 1.01 NL 0.98 NY 1.04 ON 0.95 ! OV 1.02 PT 1.02 SC 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 KK 1.06 KP 1.02 ! LA 0.98 MK 0.90 NL 0.97 OV 0.98 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 MK 0.90 ON 0.94 OV 1.05 ! WZ 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! KK 1.00 MK 0.94 NY 0.95 ON 0.98 ! OV 0.99 WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.01 HN 1.03 KK 0.96 ! KP 1.01 LA 0.99 NL 0.99 NY 0.93 ! ON 0.99 OV 1.00 PT 1.02 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.92 KP 0.97 ! LA 0.99 NL 0.98 NY 1.03 ON 1.02 ! OV 1.02 PT 1.02 SC 1.06 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KK 1.06 KP 1.01 ! LA 0.98 MK 0.91 NL 0.97 OV 0.99 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 MK 0.89 ON 1.03 OV 1.03 ! WZ 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! KK 1.02 MK 0.93 NY 0.96 ON 0.98 ! OV 1.00 WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.01 HN 1.06 KK 0.94 ! KP 1.00 LA 0.98 NL 0.99 NY 0.92 ! ON 1.04 OV 1.01 PT 1.00 ! ! ! Fit before self-cal, rms=0.137374Jy sigma=1.587537 ! Fit after self-cal, rms=0.120972Jy sigma=1.368419 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8311 mas, bmaj=1.065 mas, bpa=-55.08 degrees ! Estimated noise=1.09207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493218 Jy ! Component: 100 - total flux cleaned = 0.00727365 Jy ! Component: 150 - total flux cleaned = 0.00727076 Jy ! Component: 200 - total flux cleaned = 0.00727494 Jy ! Total flux subtracted in 200 components = 0.00727494 Jy ! Clean residual min=-0.018238 max=0.015578 Jy/beam ! Clean residual mean=-0.000038 rms=0.003154 Jy/beam ! Combined flux in latest and established models = 2.22609 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 2.22609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118616Jy sigma=1.345393 ! Fit after self-cal, rms=0.118026Jy sigma=1.335707 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118026Jy sigma=1.335707 ! Fit after self-cal, rms=0.107889Jy sigma=1.218417 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8309 mas, bmaj=1.068 mas, bpa=-54.6 degrees ! Estimated noise=1.0907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038643 Jy ! Component: 100 - total flux cleaned = 0.00502036 Jy ! Component: 150 - total flux cleaned = 0.00457545 Jy ! Component: 200 - total flux cleaned = 0.00419641 Jy ! Total flux subtracted in 200 components = 0.00419641 Jy ! Clean residual min=-0.012076 max=0.014826 Jy/beam ! Clean residual mean=-0.000015 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 2.23028 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 2.23028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106290Jy sigma=1.197117 ! Fit after self-cal, rms=0.105717Jy sigma=1.188562 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738558 Jy ! Component: 100 - total flux cleaned = 0.000336492 Jy ! Component: 150 - total flux cleaned = 0.000527278 Jy ! Component: 200 - total flux cleaned = 0.000359369 Jy ! Total flux subtracted in 200 components = 0.000359369 Jy ! Clean residual min=-0.011949 max=0.014745 Jy/beam ! Clean residual mean=-0.000015 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 2.23064 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 2.23064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104577Jy sigma=1.174121 ! Fit after self-cal, rms=0.104053Jy sigma=1.166551 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Added new window around map position (14.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00922106 Jy ! Component: 100 - total flux cleaned = 0.0145198 Jy ! Component: 150 - total flux cleaned = 0.018888 Jy ! Component: 200 - total flux cleaned = 0.0219478 Jy ! Total flux subtracted in 200 components = 0.0219478 Jy ! Clean residual min=-0.011780 max=0.011926 Jy/beam ! Clean residual mean=-0.000008 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 2.25259 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 2.25259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101342Jy sigma=1.131947 ! Fit after self-cal, rms=0.100832Jy sigma=1.126065 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100832Jy sigma=1.126065 ! Fit after self-cal, rms=0.100143Jy sigma=1.119133 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8298 mas, bmaj=1.07 mas, bpa=-54.49 degrees ! Estimated noise=1.08994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195941 Jy ! Component: 100 - total flux cleaned = 0.00397817 Jy ! Component: 150 - total flux cleaned = 0.00683471 Jy ! Component: 200 - total flux cleaned = 0.00832243 Jy ! Total flux subtracted in 200 components = 0.00832243 Jy ! Clean residual min=-0.010442 max=0.012030 Jy/beam ! Clean residual mean=-0.000005 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 2.26091 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 2.26091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098821Jy sigma=1.102369 ! Fit after self-cal, rms=0.098447Jy sigma=1.097051 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633869 Jy ! Component: 100 - total flux cleaned = 6.66565e-05 Jy ! Component: 150 - total flux cleaned = 0.00151407 Jy ! Component: 200 - total flux cleaned = 0.00312639 Jy ! Total flux subtracted in 200 components = 0.00312639 Jy ! Clean residual min=-0.009796 max=0.011926 Jy/beam ! Clean residual mean=-0.000004 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 2.26404 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 2.26404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097474Jy sigma=1.085142 ! Fit after self-cal, rms=0.097125Jy sigma=1.079948 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097125Jy sigma=1.079948 ! Fit after self-cal, rms=0.097107Jy sigma=1.078710 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=2.114 mas, bmaj=3.323 mas, bpa=-17.67 degrees ! Estimated noise=1.59317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174547 Jy ! Component: 100 - total flux cleaned = 0.00479364 Jy ! Component: 150 - total flux cleaned = 0.00752437 Jy ! Component: 200 - total flux cleaned = 0.0096548 Jy ! Total flux subtracted in 200 components = 0.0096548 Jy ! Clean residual min=-0.007545 max=0.016538 Jy/beam ! Clean residual mean=-0.000007 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 2.2737 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 2.2737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096298Jy sigma=1.074081 ! Fit after self-cal, rms=0.095830Jy sigma=1.067788 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950021 Jy ! Component: 100 - total flux cleaned = 0.0120149 Jy ! Component: 150 - total flux cleaned = 0.0151705 Jy ! Component: 200 - total flux cleaned = 0.0184054 Jy ! Total flux subtracted in 200 components = 0.0184054 Jy ! Clean residual min=-0.007021 max=0.006671 Jy/beam ! Clean residual mean=-0.000009 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 2.2921 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 2.2921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094892Jy sigma=1.062932 ! Fit after self-cal, rms=0.094479Jy sigma=1.055296 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8293 mas, bmaj=1.071 mas, bpa=-54.46 degrees ! Estimated noise=1.09021 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8293 x 1.071 at -54.46 degrees (North through East) ! Clean map min=-0.0073877 max=1.2567 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094479Jy sigma=1.055296 ! Fit after self-cal, rms=0.088637Jy sigma=0.962051 ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8282 mas, bmaj=1.074 mas, bpa=-54.14 degrees ! Estimated noise=1.08866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249642 Jy ! Component: 100 - total flux cleaned = 0.00383552 Jy ! Component: 150 - total flux cleaned = 0.0041309 Jy ! Component: 200 - total flux cleaned = 0.00412802 Jy ! Total flux subtracted in 200 components = 0.00412802 Jy ! Clean residual min=-0.009978 max=0.007213 Jy/beam ! Clean residual mean=-0.000005 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 2.29623 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 2.29623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086541Jy sigma=0.932686 ! Fit after self-cal, rms=0.086356Jy sigma=0.931178 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060266 Jy ! Component: 100 - total flux cleaned = 0.00137727 Jy ! Component: 150 - total flux cleaned = 0.00162022 Jy ! Component: 200 - total flux cleaned = 0.00231096 Jy ! Total flux subtracted in 200 components = 0.00231096 Jy ! Clean residual min=-0.008784 max=0.006858 Jy/beam ! Clean residual mean=-0.000006 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 2.29854 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 132 components and 2.29854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085007Jy sigma=0.912705 ! Fit after self-cal, rms=0.084851Jy sigma=0.911364 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084851Jy sigma=0.911364 ! Fit after self-cal, rms=0.084724Jy sigma=0.909882 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.6354 mas, bmaj=0.8449 mas, bpa=-75.24 degrees ! Estimated noise=1.41667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.968296 Jy ! Component: 100 - total flux cleaned = 1.38836 Jy ! Component: 150 - total flux cleaned = 1.627 Jy ! Component: 200 - total flux cleaned = 1.78031 Jy ! Total flux subtracted in 200 components = 1.78031 Jy ! Clean residual min=-0.024372 max=0.084327 Jy/beam ! Clean residual mean=-0.000004 rms=0.006373 Jy/beam ! Combined flux in latest and established models = 1.78031 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.78031 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8277 mas, bmaj=1.075 mas, bpa=-54.2 degrees ! Estimated noise=1.08902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155642 Jy ! Component: 100 - total flux cleaned = 0.247566 Jy ! Component: 150 - total flux cleaned = 0.306611 Jy ! Component: 200 - total flux cleaned = 0.34702 Jy ! Total flux subtracted in 200 components = 0.34702 Jy ! Clean residual min=-0.010945 max=0.024558 Jy/beam ! Clean residual mean=-0.000002 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 2.12733 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 2.12733 Jy ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Added new window around map position (-0.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290789 Jy ! Component: 100 - total flux cleaned = 0.051247 Jy ! Component: 150 - total flux cleaned = 0.0694589 Jy ! Component: 200 - total flux cleaned = 0.0847462 Jy ! Total flux subtracted in 200 components = 0.0847462 Jy ! Clean residual min=-0.008680 max=0.010329 Jy/beam ! Clean residual mean=-0.000005 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 2.21207 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 68 components and 2.21207 Jy ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Added new window around map position (0, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131554 Jy ! Component: 100 - total flux cleaned = 0.0244352 Jy ! Component: 150 - total flux cleaned = 0.0342828 Jy ! Component: 200 - total flux cleaned = 0.0426263 Jy ! Total flux subtracted in 200 components = 0.0426263 Jy ! Clean residual min=-0.007922 max=0.007660 Jy/beam ! Clean residual mean=-0.000005 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 2.2547 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 92 components and 2.2547 Jy ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=2.113 mas, bmaj=3.327 mas, bpa=-17.71 degrees ! Estimated noise=1.59049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126898 Jy ! Component: 100 - total flux cleaned = 0.0218731 Jy ! Component: 150 - total flux cleaned = 0.0281191 Jy ! Component: 200 - total flux cleaned = 0.0322208 Jy ! Total flux subtracted in 200 components = 0.0322208 Jy ! Clean residual min=-0.006028 max=0.006158 Jy/beam ! Clean residual mean=-0.000003 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 2.28692 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308683 Jy ! Component: 100 - total flux cleaned = 0.00575962 Jy ! Component: 150 - total flux cleaned = 0.00754061 Jy ! Component: 200 - total flux cleaned = 0.00902236 Jy ! Total flux subtracted in 200 components = 0.00902236 Jy ! Clean residual min=-0.005796 max=0.005843 Jy/beam ! Clean residual mean=-0.000001 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 2.29594 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 147 components and 2.29595 Jy ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! Estimated beam: bmin=0.8277 mas, bmaj=1.075 mas, bpa=-54.2 degrees ! Estimated noise=1.08902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203101 Jy ! Component: 100 - total flux cleaned = -0.00227959 Jy ! Component: 150 - total flux cleaned = -0.00204229 Jy ! Component: 200 - total flux cleaned = -0.00159281 Jy ! Total flux subtracted in 200 components = -0.00159281 Jy ! Clean residual min=-0.007183 max=0.006548 Jy/beam ! Clean residual mean=-0.000000 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 2.29435 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 174 components and 2.29435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083368Jy sigma=0.881966 ! Fit after self-cal, rms=0.081713Jy sigma=0.858195 wmodel J0217+7349_X_map.mod ! Writing 174 model components to file: J0217+7349_X_map.mod wobs J0217+7349_X_uvs.fits ! Writing UV FITS file: J0217+7349_X_uvs.fits wwins J0217+7349_X_map.win ! wwins: Wrote 8 windows to J0217+7349_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000577236 Jy ! Component: 100 - total flux cleaned = 0.00113157 Jy ! Component: 150 - total flux cleaned = 0.0018775 Jy ! Component: 200 - total flux cleaned = 0.00239063 Jy ! Component: 250 - total flux cleaned = 0.0025887 Jy ! Component: 300 - total flux cleaned = 0.00268543 Jy ! Component: 350 - total flux cleaned = 0.0027829 Jy ! Component: 400 - total flux cleaned = 0.0028782 Jy ! Component: 450 - total flux cleaned = 0.00260265 Jy ! Component: 500 - total flux cleaned = 0.00305839 Jy ! Component: 550 - total flux cleaned = 0.0034155 Jy ! Component: 600 - total flux cleaned = 0.00385641 Jy ! Component: 650 - total flux cleaned = 0.00385688 Jy ! Component: 700 - total flux cleaned = 0.00402832 Jy ! Component: 750 - total flux cleaned = 0.00411273 Jy ! Component: 800 - total flux cleaned = 0.00411171 Jy ! Component: 850 - total flux cleaned = 0.00419447 Jy ! Component: 900 - total flux cleaned = 0.00435738 Jy ! Component: 950 - total flux cleaned = 0.00443756 Jy ! Component: 1000 - total flux cleaned = 0.00451745 Jy ! Component: 1050 - total flux cleaned = 0.00443756 Jy ! Component: 1100 - total flux cleaned = 0.0046731 Jy ! Component: 1150 - total flux cleaned = 0.00467245 Jy ! Component: 1200 - total flux cleaned = 0.00474847 Jy ! Component: 1250 - total flux cleaned = 0.00490156 Jy ! Component: 1300 - total flux cleaned = 0.00512809 Jy ! Component: 1350 - total flux cleaned = 0.00520369 Jy ! Component: 1400 - total flux cleaned = 0.00550209 Jy ! Component: 1450 - total flux cleaned = 0.00550185 Jy ! Component: 1500 - total flux cleaned = 0.00579531 Jy ! Component: 1550 - total flux cleaned = 0.00579545 Jy ! Component: 1600 - total flux cleaned = 0.00637534 Jy ! Component: 1650 - total flux cleaned = 0.00673353 Jy ! Component: 1700 - total flux cleaned = 0.00680509 Jy ! Component: 1750 - total flux cleaned = 0.00701737 Jy ! Component: 1800 - total flux cleaned = 0.00708741 Jy ! Component: 1850 - total flux cleaned = 0.00715732 Jy ! Component: 1900 - total flux cleaned = 0.00743596 Jy ! Component: 1950 - total flux cleaned = 0.00750564 Jy ! Component: 2000 - total flux cleaned = 0.00771228 Jy ! Component: 2050 - total flux cleaned = 0.00791632 Jy ! Component: 2100 - total flux cleaned = 0.00811952 Jy ! Component: 2150 - total flux cleaned = 0.00811914 Jy ! Component: 2200 - total flux cleaned = 0.00845488 Jy ! Component: 2250 - total flux cleaned = 0.00858824 Jy ! Component: 2300 - total flux cleaned = 0.00885404 Jy ! Component: 2350 - total flux cleaned = 0.00898543 Jy ! Component: 2400 - total flux cleaned = 0.0091163 Jy ! Component: 2450 - total flux cleaned = 0.00911585 Jy ! Component: 2500 - total flux cleaned = 0.0093103 Jy ! Component: 2550 - total flux cleaned = 0.0091809 Jy ! Component: 2600 - total flux cleaned = 0.00937388 Jy ! Component: 2650 - total flux cleaned = 0.00943784 Jy ! Component: 2700 - total flux cleaned = 0.00943815 Jy ! Component: 2750 - total flux cleaned = 0.00969134 Jy ! Component: 2800 - total flux cleaned = 0.00956558 Jy ! Component: 2850 - total flux cleaned = 0.00969071 Jy ! Component: 2900 - total flux cleaned = 0.00981523 Jy ! Component: 2950 - total flux cleaned = 0.00969111 Jy ! Component: 3000 - total flux cleaned = 0.00999988 Jy ! Component: 3050 - total flux cleaned = 0.0101837 Jy ! Component: 3100 - total flux cleaned = 0.0101835 Jy ! Component: 3150 - total flux cleaned = 0.0101834 Jy ! Component: 3200 - total flux cleaned = 0.0102443 Jy ! Component: 3250 - total flux cleaned = 0.010063 Jy ! Component: 3300 - total flux cleaned = 0.0103635 Jy ! Component: 3350 - total flux cleaned = 0.0106034 Jy ! Component: 3400 - total flux cleaned = 0.0103653 Jy ! Component: 3450 - total flux cleaned = 0.010247 Jy ! Component: 3500 - total flux cleaned = 0.010306 Jy ! Component: 3550 - total flux cleaned = 0.0104821 Jy ! Component: 3600 - total flux cleaned = 0.0105988 Jy ! Component: 3650 - total flux cleaned = 0.0106573 Jy ! Component: 3700 - total flux cleaned = 0.0108895 Jy ! Component: 3750 - total flux cleaned = 0.0107743 Jy ! Component: 3800 - total flux cleaned = 0.0108893 Jy ! Component: 3850 - total flux cleaned = 0.0108892 Jy ! Component: 3900 - total flux cleaned = 0.0107174 Jy ! Component: 3950 - total flux cleaned = 0.0108308 Jy ! Component: 4000 - total flux cleaned = 0.0108307 Jy ! Component: 4050 - total flux cleaned = 0.0106618 Jy ! Total flux subtracted in 4096 components = 0.0106617 Jy ! Clean residual min=-0.003634 max=0.002805 Jy/beam ! Clean residual mean=-0.000001 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 2.30501 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 495 components and 2.30501 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J0217+7349_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8277 x 1.075 at -54.2 degrees (North through East) ! Clean map min=-0.0051076 max=1.2534 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0217+7349_X_map.fits wmodel /scr/pima/rv120_uvs/J0217+7349_X_map.mod ! Writing 495 model components to file: /scr/pima/rv120_uvs/J0217+7349_X_map.mod wobs /scr/pima/rv120_uvs/J0217+7349_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J0217+7349_X_uvs.fits wwins /scr/pima/rv120_uvs/J0217+7349_X_map.win ! wwins: Wrote 9 windows to /scr/pima/rv120_uvs/J0217+7349_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.25344 invert ! Inverting map ! Your choice of large map pixels excluded 0.519% of the data. ! The x-axis pixel size should ideally be below 0.1852 milli-arcsec ! The y-axis pixel size should ideally be below 0.1757 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000916706 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.219405 0.219405 0.43881 0.877621 1.75524 3.51048 7.02097 14.0419 28.0839 56.1677 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.253 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1367.33 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J0217+7349_X_dfm.log closed on Fri Dec 22 22:38:41 2017