! Started logfile: /scr/pima/rv120_uvs/J0136+4751_S_dfm.log on Fri Dec 22 22:29:30 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv120_uvs/J0136+4751_S_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J0136+4751_S_uva.fits ! AN table 1: 4 integrations on 6 of 6 possible baselines. ! AN table 2: 4 integrations on 28 of 28 possible baselines. ! AN table 3: 54 integrations on 6 of 6 possible baselines. ! AN table 4: 2 integrations on 3 of 3 possible baselines. ! AN table 5: 21 integrations on 15 of 15 possible baselines. ! AN table 6: 57 integrations on 66 of 66 possible baselines. ! AN table 7: 12 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.385374 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7188 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0136+4751_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 146 telescope corrections were flagged in sub-array 3. ! A total of 90 telescope corrections were flagged in sub-array 5. ! A total of 396 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 146 telescope corrections were flagged in sub-array 3. ! A total of 90 telescope corrections were flagged in sub-array 5. ! A total of 396 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 146 telescope corrections were flagged in sub-array 3. ! A total of 92 telescope corrections were flagged in sub-array 5. ! A total of 448 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 146 telescope corrections were flagged in sub-array 3. ! A total of 90 telescope corrections were flagged in sub-array 5. ! A total of 396 telescope corrections were flagged in sub-array 6. ! A total of 28 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.328397Jy sigma=20.032102 ! Fit after self-cal, rms=0.365660Jy sigma=5.925549 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=2.94 mas, bpa=-31.42 degrees ! Estimated noise=0.892021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.585791 Jy ! Component: 100 - total flux cleaned = 0.799369 Jy ! Total flux subtracted in 100 components = 0.799369 Jy ! Clean residual min=-0.019701 max=0.096613 Jy/beam ! Clean residual mean=0.000121 rms=0.005122 Jy/beam ! Combined flux in latest and established models = 0.799369 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.799369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286844Jy sigma=3.920882 ! Fit after self-cal, rms=0.286002Jy sigma=3.911769 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108933 Jy ! Component: 100 - total flux cleaned = 0.172307 Jy ! Total flux subtracted in 100 components = 0.172307 Jy ! Clean residual min=-0.012961 max=0.042343 Jy/beam ! Clean residual mean=0.000064 rms=0.003225 Jy/beam ! Combined flux in latest and established models = 0.971676 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.971675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196237Jy sigma=2.595002 ! Fit after self-cal, rms=0.195715Jy sigma=2.587062 ! Inverting map ! Added new window around map position (-1, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468388 Jy ! Component: 100 - total flux cleaned = 0.0786471 Jy ! Total flux subtracted in 100 components = 0.0786471 Jy ! Clean residual min=-0.010996 max=0.020548 Jy/beam ! Clean residual mean=0.000040 rms=0.002671 Jy/beam ! Combined flux in latest and established models = 1.05032 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 1.05032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166045Jy sigma=2.175985 ! Fit after self-cal, rms=0.165707Jy sigma=2.165373 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266929 Jy ! Component: 100 - total flux cleaned = 0.0458811 Jy ! Total flux subtracted in 100 components = 0.0458811 Jy ! Clean residual min=-0.010320 max=0.016678 Jy/beam ! Clean residual mean=0.000026 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 1.0962 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 1.0962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152573Jy sigma=1.990449 ! Fit after self-cal, rms=0.152365Jy sigma=1.983751 ! Inverting map ! Added new window around map position (-5.5, 5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190567 Jy ! Component: 100 - total flux cleaned = 0.033024 Jy ! Total flux subtracted in 100 components = 0.033024 Jy ! Clean residual min=-0.010006 max=0.012859 Jy/beam ! Clean residual mean=0.000016 rms=0.002314 Jy/beam ! Combined flux in latest and established models = 1.12923 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 1.12923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144909Jy sigma=1.887272 ! Fit after self-cal, rms=0.144757Jy sigma=1.882649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=3.274 mas, bpa=-5.318 degrees ! Estimated noise=0.688624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291115 Jy ! Component: 100 - total flux cleaned = 0.0481217 Jy ! Component: 150 - total flux cleaned = 0.0613162 Jy ! Component: 200 - total flux cleaned = 0.0705469 Jy ! Total flux subtracted in 200 components = 0.0705469 Jy ! Clean residual min=-0.010089 max=0.013152 Jy/beam ! Clean residual mean=-0.000071 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 1.19977 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 112 components and 1.19977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135270Jy sigma=1.774423 ! Fit after self-cal, rms=0.134823Jy sigma=1.764686 ! Inverting map ! Added new window around map position (0, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141175 Jy ! Component: 100 - total flux cleaned = 0.0223104 Jy ! Component: 150 - total flux cleaned = 0.0279385 Jy ! Component: 200 - total flux cleaned = 0.0318081 Jy ! Total flux subtracted in 200 components = 0.0318081 Jy ! Clean residual min=-0.008933 max=0.007676 Jy/beam ! Clean residual mean=-0.000061 rms=0.001811 Jy/beam ! Combined flux in latest and established models = 1.23158 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 1.23158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132475Jy sigma=1.742627 ! Fit after self-cal, rms=0.132259Jy sigma=1.739038 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 3.274 at -5.318 degrees (North through East) ! Clean map min=-0.0084242 max=0.76366 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 NY 1.01 ON 1.09 WZ 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 KP 1.00 LA 0.98 ! ON 0.99 OV 1.04 PT 1.00 SC 1.03 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KK 1.14 NY 1.02 ON 1.02 WZ 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.06 NL 1.04 NY 1.07 ON 1.03 ! SC 0.96 WZ 1.03 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 0.99 HN 1.03 KK 1.02 ! KP 0.99 LA 1.00 MK 0.97 NL 1.01 ! NY 1.00 OV 0.99 PT 1.00 SC 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 KK 1.05 MK 0.97 OV 1.02 ! WZ 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 NY 0.88 ON 1.05 WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 KP 1.01 LA 0.99 ! ON 1.03 OV 1.00 PT 1.01 SC 1.01 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KK 1.15 NY 0.94 ON 0.99 WZ 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.98 NL 1.09 NY 1.05 ON 0.99 ! SC 0.98 WZ 0.91 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.99 HN 1.02 KK 1.03 ! KP 0.98 LA 0.99 MK 0.95 NL 1.00 ! NY 0.99 OV 1.00 PT 0.99 SC 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 KK 1.03 MK 0.96 OV 0.99 ! WZ 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 NY 1.17 ON 0.99 WZ 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 KP 1.00* LA 1.05 ! ON 1.05 OV 1.05 PT 1.01 SC 0.77 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KK 1.08 NY 1.05 ON 0.95 WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.13 NL 1.00* NY 1.04 ON 1.09 ! SC 1.15 WZ 1.06 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.98 HN 0.99 KK 1.00 ! KP 1.00* LA 0.99 MK 1.22 NL 1.00* ! NY 1.01 OV 0.99 PT 0.99 SC 1.37 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.86 KK 1.07 MK 0.87 OV 1.09 ! WZ 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 NY 1.15 ON 0.93 WZ 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 KP 1.00 LA 1.01 ! ON 0.96 OV 1.02 PT 1.01 SC 0.95 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! KK 0.99 NY 1.12 ON 0.93 WZ 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* MK 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.95 NL 1.03 NY 1.03 ON 1.13 ! SC 0.98 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.98 HN 1.02 KK 1.03 ! KP 0.98 LA 1.00 MK 0.93 NL 0.97 ! NY 0.98 OV 1.00 PT 0.99 SC 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.06 KK 1.06 MK 0.94 OV 0.98 ! WZ 1.00 ! ! ! Fit before self-cal, rms=0.132259Jy sigma=1.739038 ! Fit after self-cal, rms=0.132478Jy sigma=1.570483 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=3.602 mas, bpa=-81.21 degrees ! Estimated noise=0.699473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00293275 Jy ! Component: 100 - total flux cleaned = -0.00242239 Jy ! Component: 150 - total flux cleaned = -0.0022771 Jy ! Component: 200 - total flux cleaned = -0.00228261 Jy ! Total flux subtracted in 200 components = -0.00228261 Jy ! Clean residual min=-0.007213 max=0.006658 Jy/beam ! Clean residual mean=-0.000037 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 1.2293 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 140 components and 1.2293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132032Jy sigma=1.564765 ! Fit after self-cal, rms=0.132012Jy sigma=1.563968 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132012Jy sigma=1.563968 ! Fit after self-cal, rms=0.127067Jy sigma=1.170807 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=3.606 mas, bpa=-83.86 degrees ! Estimated noise=0.697354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011697 Jy ! Component: 100 - total flux cleaned = 0.00105156 Jy ! Component: 150 - total flux cleaned = 0.00104857 Jy ! Component: 200 - total flux cleaned = 0.00114259 Jy ! Total flux subtracted in 200 components = 0.00114259 Jy ! Clean residual min=-0.004697 max=0.005517 Jy/beam ! Clean residual mean=-0.000018 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 1.23044 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 159 components and 1.23044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126854Jy sigma=1.165909 ! Fit after self-cal, rms=0.127045Jy sigma=1.165063 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511169 Jy ! Component: 100 - total flux cleaned = 0.0056408 Jy ! Component: 150 - total flux cleaned = 0.00609333 Jy ! Component: 200 - total flux cleaned = 0.00629353 Jy ! Total flux subtracted in 200 components = 0.00629353 Jy ! Clean residual min=-0.004652 max=0.004385 Jy/beam ! Clean residual mean=-0.000014 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 1.23674 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 172 components and 1.23674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126674Jy sigma=1.158451 ! Fit after self-cal, rms=0.126649Jy sigma=1.157784 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126649Jy sigma=1.157784 ! Fit after self-cal, rms=0.211732Jy sigma=1.021620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=3.603 mas, bpa=-83.69 degrees ! Estimated noise=0.696224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218477 Jy ! Component: 100 - total flux cleaned = 0.0024916 Jy ! Component: 150 - total flux cleaned = 0.0025782 Jy ! Component: 200 - total flux cleaned = 0.00265333 Jy ! Total flux subtracted in 200 components = 0.00265333 Jy ! Clean residual min=-0.002855 max=0.003444 Jy/beam ! Clean residual mean=-0.000006 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 1.23939 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 180 components and 1.23939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211633Jy sigma=1.017632 ! Fit after self-cal, rms=0.211676Jy sigma=1.017278 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43, -56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272713 Jy ! Component: 100 - total flux cleaned = 0.00339368 Jy ! Component: 150 - total flux cleaned = 0.00354691 Jy ! Component: 200 - total flux cleaned = 0.00361861 Jy ! Total flux subtracted in 200 components = 0.00361861 Jy ! Clean residual min=-0.002890 max=0.002977 Jy/beam ! Clean residual mean=-0.000007 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 1.24301 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 197 components and 1.24301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211552Jy sigma=1.014239 ! Fit after self-cal, rms=0.211535Jy sigma=1.014069 ! Inverting map ! Added new window around map position (-33, -98.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141806 Jy ! Component: 100 - total flux cleaned = 0.00133148 Jy ! Component: 150 - total flux cleaned = 0.00163068 Jy ! Component: 200 - total flux cleaned = 0.00170383 Jy ! Total flux subtracted in 200 components = 0.00170383 Jy ! Clean residual min=-0.002824 max=0.002970 Jy/beam ! Clean residual mean=-0.000006 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 1.24471 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 213 components and 1.24471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211417Jy sigma=1.010841 ! Fit after self-cal, rms=0.211408Jy sigma=1.010682 ! Inverting map ! Added new window around map position (-6, 27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201774 Jy ! Component: 100 - total flux cleaned = 0.00187483 Jy ! Component: 150 - total flux cleaned = 0.0016696 Jy ! Component: 200 - total flux cleaned = 0.00160373 Jy ! Total flux subtracted in 200 components = 0.00160373 Jy ! Clean residual min=-0.002739 max=0.002758 Jy/beam ! Clean residual mean=-0.000006 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 1.24632 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 228 components and 1.24632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211303Jy sigma=1.008059 ! Fit after self-cal, rms=0.211294Jy sigma=1.007950 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211294Jy sigma=1.007950 ! Fit after self-cal, rms=0.206531Jy sigma=1.007114 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.19 mas, bmaj=10.16 mas, bpa=-82.53 degrees ! Estimated noise=1.03713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159172 Jy ! Component: 100 - total flux cleaned = 0.00213064 Jy ! Component: 150 - total flux cleaned = 0.00255929 Jy ! Component: 200 - total flux cleaned = 0.00280451 Jy ! Total flux subtracted in 200 components = 0.00280451 Jy ! Clean residual min=-0.002447 max=0.002798 Jy/beam ! Clean residual mean=-0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 1.24912 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 237 components and 1.24912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206523Jy sigma=1.007216 ! Fit after self-cal, rms=0.206521Jy sigma=1.007145 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268476 Jy ! Component: 100 - total flux cleaned = 0.00356893 Jy ! Component: 150 - total flux cleaned = 0.0037454 Jy ! Component: 200 - total flux cleaned = 0.00389688 Jy ! Total flux subtracted in 200 components = 0.00389688 Jy ! Clean residual min=-0.002360 max=0.002050 Jy/beam ! Clean residual mean=0.000009 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.25302 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 267 components and 1.25302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206466Jy sigma=1.006530 ! Fit after self-cal, rms=0.206470Jy sigma=1.006421 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=3.604 mas, bpa=-84.14 degrees ! Estimated noise=0.69585 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 3.604 at -84.14 degrees (North through East) ! Clean map min=-0.0025865 max=0.77459 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206470Jy sigma=1.006421 ! Fit after self-cal, rms=0.203396Jy sigma=0.895044 ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=3.605 mas, bpa=-84.19 degrees ! Estimated noise=0.695698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203562 Jy ! Component: 100 - total flux cleaned = 0.0022874 Jy ! Component: 150 - total flux cleaned = 0.00236899 Jy ! Component: 200 - total flux cleaned = 0.00236874 Jy ! Total flux subtracted in 200 components = 0.00236874 Jy ! Clean residual min=-0.002517 max=0.002787 Jy/beam ! Clean residual mean=0.000003 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 1.25539 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 290 components and 1.25539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203288Jy sigma=0.891616 ! Fit after self-cal, rms=0.203291Jy sigma=0.891526 ! Inverting map ! Added new window around map position (-75, 110). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168069 Jy ! Component: 100 - total flux cleaned = 0.00176152 Jy ! Component: 150 - total flux cleaned = 0.00175986 Jy ! Component: 200 - total flux cleaned = 0.00154589 Jy ! Total flux subtracted in 200 components = 0.00154589 Jy ! Clean residual min=-0.002529 max=0.002707 Jy/beam ! Clean residual mean=0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 1.25693 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 305 components and 1.25693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203202Jy sigma=0.888673 ! Fit after self-cal, rms=0.203193Jy sigma=0.888591 ! Inverting map ! Added new window around map position (-97, 84.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121897 Jy ! Component: 100 - total flux cleaned = 0.0018182 Jy ! Component: 150 - total flux cleaned = 0.00188916 Jy ! Component: 200 - total flux cleaned = 0.00175473 Jy ! Total flux subtracted in 200 components = 0.00175473 Jy ! Clean residual min=-0.002506 max=0.002736 Jy/beam ! Clean residual mean=-0.000000 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 1.25869 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 320 components and 1.25869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203089Jy sigma=0.885573 ! Fit after self-cal, rms=0.203080Jy sigma=0.885493 ! Inverting map ! Added new window around map position (-92, -120.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397297 Jy ! Component: 100 - total flux cleaned = 0.0003101 Jy ! Component: 150 - total flux cleaned = 0.000308659 Jy ! Component: 200 - total flux cleaned = 0.000519851 Jy ! Total flux subtracted in 200 components = 0.000519851 Jy ! Clean residual min=-0.002434 max=0.002441 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 1.25921 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 333 components and 1.25921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202930Jy sigma=0.881788 ! Fit after self-cal, rms=0.202932Jy sigma=0.881682 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202932Jy sigma=0.881682 ! Fit after self-cal, rms=0.198948Jy sigma=0.881125 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.681 mas, bmaj=3.046 mas, bpa=-48.34 degrees ! Estimated noise=0.909916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.593393 Jy ! Component: 100 - total flux cleaned = 0.814407 Jy ! Component: 150 - total flux cleaned = 0.923585 Jy ! Component: 200 - total flux cleaned = 0.9908 Jy ! Total flux subtracted in 200 components = 0.9908 Jy ! Clean residual min=-0.008292 max=0.036008 Jy/beam ! Clean residual mean=0.000078 rms=0.002441 Jy/beam ! Combined flux in latest and established models = 0.9908 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.9908 Jy ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=3.605 mas, bpa=-84.46 degrees ! Estimated noise=0.695379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0793717 Jy ! Component: 100 - total flux cleaned = 0.126613 Jy ! Component: 150 - total flux cleaned = 0.157604 Jy ! Component: 200 - total flux cleaned = 0.178799 Jy ! Total flux subtracted in 200 components = 0.178799 Jy ! Clean residual min=-0.004709 max=0.011871 Jy/beam ! Clean residual mean=-0.000026 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 1.1696 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 91 components and 1.1696 Jy ! Inverting map ! Added new window around map position (-7.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152375 Jy ! Component: 100 - total flux cleaned = 0.0267582 Jy ! Component: 150 - total flux cleaned = 0.0357759 Jy ! Component: 200 - total flux cleaned = 0.0428699 Jy ! Total flux subtracted in 200 components = 0.0428699 Jy ! Clean residual min=-0.003308 max=0.005006 Jy/beam ! Clean residual mean=-0.000012 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 1.21247 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 129 components and 1.21247 Jy ! Inverting map ! Added new window around map position (0.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593727 Jy ! Component: 100 - total flux cleaned = 0.010957 Jy ! Component: 150 - total flux cleaned = 0.0150163 Jy ! Component: 200 - total flux cleaned = 0.0181899 Jy ! Total flux subtracted in 200 components = 0.0181899 Jy ! Clean residual min=-0.002838 max=0.003131 Jy/beam ! Clean residual mean=-0.000005 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 1.23066 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 162 components and 1.23066 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.188 mas, bmaj=10.16 mas, bpa=-82.58 degrees ! Estimated noise=1.03699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608174 Jy ! Component: 100 - total flux cleaned = 0.0100406 Jy ! Component: 150 - total flux cleaned = 0.0130466 Jy ! Component: 200 - total flux cleaned = 0.0154648 Jy ! Total flux subtracted in 200 components = 0.0154648 Jy ! Clean residual min=-0.002133 max=0.002225 Jy/beam ! Clean residual mean=0.000006 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 1.24612 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208574 Jy ! Component: 100 - total flux cleaned = 0.00392595 Jy ! Component: 150 - total flux cleaned = 0.00556224 Jy ! Component: 200 - total flux cleaned = 0.00696422 Jy ! Total flux subtracted in 200 components = 0.00696422 Jy ! Clean residual min=-0.002000 max=0.002045 Jy/beam ! Clean residual mean=0.000008 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 1.25309 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 280 components and 1.25309 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=3.605 mas, bpa=-84.46 degrees ! Estimated noise=0.695379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163753 Jy ! Component: 100 - total flux cleaned = 0.00229318 Jy ! Component: 150 - total flux cleaned = 0.00269233 Jy ! Component: 200 - total flux cleaned = 0.00297631 Jy ! Total flux subtracted in 200 components = 0.00297631 Jy ! Clean residual min=-0.002505 max=0.002629 Jy/beam ! Clean residual mean=0.000000 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 1.25606 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 297 components and 1.25607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199113Jy sigma=0.888298 ! Fit after self-cal, rms=0.199079Jy sigma=0.885487 wmodel J0136+4751_S_map.mod ! Writing 297 model components to file: J0136+4751_S_map.mod wobs J0136+4751_S_uvs.fits ! Writing UV FITS file: J0136+4751_S_uvs.fits wwins J0136+4751_S_map.win ! wwins: Wrote 14 windows to J0136+4751_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481189 Jy ! Component: 100 - total flux cleaned = 0.000480026 Jy ! Component: 150 - total flux cleaned = 0.00026159 Jy ! Component: 200 - total flux cleaned = 0.000261604 Jy ! Component: 250 - total flux cleaned = 0.00034535 Jy ! Component: 300 - total flux cleaned = 0.000221099 Jy ! Component: 350 - total flux cleaned = 5.84409e-05 Jy ! Component: 400 - total flux cleaned = 9.97556e-05 Jy ! Component: 450 - total flux cleaned = 0.000139716 Jy ! Component: 500 - total flux cleaned = 0.00017927 Jy ! Component: 550 - total flux cleaned = 0.000218037 Jy ! Component: 600 - total flux cleaned = 0.000256879 Jy ! Component: 650 - total flux cleaned = 0.000333852 Jy ! Component: 700 - total flux cleaned = 0.000525044 Jy ! Component: 750 - total flux cleaned = 0.00060142 Jy ! Component: 800 - total flux cleaned = 0.000714803 Jy ! Component: 850 - total flux cleaned = 0.000902167 Jy ! Component: 900 - total flux cleaned = 0.000976442 Jy ! Component: 950 - total flux cleaned = 0.0010507 Jy ! Component: 1000 - total flux cleaned = 0.0011606 Jy ! Component: 1050 - total flux cleaned = 0.00130662 Jy ! Component: 1100 - total flux cleaned = 0.00119746 Jy ! Component: 1150 - total flux cleaned = 0.00130603 Jy ! Component: 1200 - total flux cleaned = 0.00148606 Jy ! Component: 1250 - total flux cleaned = 0.00141477 Jy ! Component: 1300 - total flux cleaned = 0.00166331 Jy ! Component: 1350 - total flux cleaned = 0.00166322 Jy ! Component: 1400 - total flux cleaned = 0.00173353 Jy ! Component: 1450 - total flux cleaned = 0.00183908 Jy ! Component: 1500 - total flux cleaned = 0.00183903 Jy ! Component: 1550 - total flux cleaned = 0.00197772 Jy ! Component: 1600 - total flux cleaned = 0.00204653 Jy ! Component: 1650 - total flux cleaned = 0.00215003 Jy ! Component: 1700 - total flux cleaned = 0.00225246 Jy ! Component: 1750 - total flux cleaned = 0.00225256 Jy ! Component: 1800 - total flux cleaned = 0.0024223 Jy ! Component: 1850 - total flux cleaned = 0.00259095 Jy ! Component: 1900 - total flux cleaned = 0.00262441 Jy ! Component: 1950 - total flux cleaned = 0.00259109 Jy ! Component: 2000 - total flux cleaned = 0.00282422 Jy ! Component: 2050 - total flux cleaned = 0.00292395 Jy ! Component: 2100 - total flux cleaned = 0.00302319 Jy ! Component: 2150 - total flux cleaned = 0.00322089 Jy ! Component: 2200 - total flux cleaned = 0.00322077 Jy ! Component: 2250 - total flux cleaned = 0.00328603 Jy ! Component: 2300 - total flux cleaned = 0.00338367 Jy ! Component: 2350 - total flux cleaned = 0.0034809 Jy ! Component: 2400 - total flux cleaned = 0.0036104 Jy ! Component: 2450 - total flux cleaned = 0.00354586 Jy ! Component: 2500 - total flux cleaned = 0.0036422 Jy ! Component: 2550 - total flux cleaned = 0.00380205 Jy ! Component: 2600 - total flux cleaned = 0.00389763 Jy ! Component: 2650 - total flux cleaned = 0.00392957 Jy ! Component: 2700 - total flux cleaned = 0.00392958 Jy ! Component: 2750 - total flux cleaned = 0.00402419 Jy ! Component: 2800 - total flux cleaned = 0.00405556 Jy ! Component: 2850 - total flux cleaned = 0.00427482 Jy ! Component: 2900 - total flux cleaned = 0.0043062 Jy ! Component: 2950 - total flux cleaned = 0.00430622 Jy ! Component: 3000 - total flux cleaned = 0.00443054 Jy ! Component: 3050 - total flux cleaned = 0.00446122 Jy ! Component: 3100 - total flux cleaned = 0.00452284 Jy ! Component: 3150 - total flux cleaned = 0.00443074 Jy ! Component: 3200 - total flux cleaned = 0.00455355 Jy ! Component: 3250 - total flux cleaned = 0.00470632 Jy ! Component: 3300 - total flux cleaned = 0.00464537 Jy ! Component: 3350 - total flux cleaned = 0.00473661 Jy ! Component: 3400 - total flux cleaned = 0.00473656 Jy ! Component: 3450 - total flux cleaned = 0.00482721 Jy ! Component: 3500 - total flux cleaned = 0.00488754 Jy ! Component: 3550 - total flux cleaned = 0.0048275 Jy ! Component: 3600 - total flux cleaned = 0.00482748 Jy ! Component: 3650 - total flux cleaned = 0.00500664 Jy ! Component: 3700 - total flux cleaned = 0.00494707 Jy ! Component: 3750 - total flux cleaned = 0.00494708 Jy ! Component: 3800 - total flux cleaned = 0.0050062 Jy ! Component: 3850 - total flux cleaned = 0.00512441 Jy ! Component: 3900 - total flux cleaned = 0.00518309 Jy ! Component: 3950 - total flux cleaned = 0.00521259 Jy ! Component: 4000 - total flux cleaned = 0.00518332 Jy ! Component: 4050 - total flux cleaned = 0.00524174 Jy ! Total flux subtracted in 4096 components = 0.0053002 Jy ! Clean residual min=-0.001709 max=0.002023 Jy/beam ! Clean residual mean=-0.000004 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 1.26137 Jy keep ! Adding 360 model components to the UV plane model. ! The established model now contains 657 components and 1.26137 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J0136+4751_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.286 x 3.605 at -84.46 degrees (North through East) ! Clean map min=-0.0022099 max=0.77521 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0136+4751_S_map.fits wmodel /scr/pima/rv120_uvs/J0136+4751_S_map.mod ! Writing 657 model components to file: /scr/pima/rv120_uvs/J0136+4751_S_map.mod wobs /scr/pima/rv120_uvs/J0136+4751_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J0136+4751_S_uvs.fits wwins /scr/pima/rv120_uvs/J0136+4751_S_map.win ! wwins: Wrote 15 windows to /scr/pima/rv120_uvs/J0136+4751_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.775209 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000508305 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.19671 0.19671 0.393421 0.786842 1.57368 3.14737 6.29473 12.5895 25.1789 50.3579 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.775 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1525.08 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J0136+4751_S_dfm.log closed on Fri Dec 22 22:29:36 2017