! Started logfile: /scr/pima/rv120_uvs/J0132-0804_X_dfm.log on Fri Dec 22 22:38:18 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv120_uvs/J0132-0804_X_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J0132-0804_X_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.854846 visibilities/baseline/integration-bin. ! Found source: J0132-0804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7232 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0132-0804_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006950Jy sigma=21.043398 ! Fit after self-cal, rms=0.940857Jy sigma=19.556600 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7154 mas, bmaj=1.79 mas, bpa=-1.269 degrees ! Estimated noise=0.76645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445622 Jy ! Component: 100 - total flux cleaned = 0.062369 Jy ! Total flux subtracted in 100 components = 0.062369 Jy ! Clean residual min=-0.004464 max=0.008402 Jy/beam ! Clean residual mean=-0.000008 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.062369 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.062369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062270Jy sigma=1.082488 ! Fit after self-cal, rms=0.061025Jy sigma=1.056130 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119124 Jy ! Component: 100 - total flux cleaned = 0.0178967 Jy ! Total flux subtracted in 100 components = 0.0178967 Jy ! Clean residual min=-0.003610 max=0.005953 Jy/beam ! Clean residual mean=-0.000005 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.0802656 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 17 components and 0.0802656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058544Jy sigma=0.985794 ! Fit after self-cal, rms=0.058434Jy sigma=0.984360 ! Inverting map ! Added new window around map position (6.8, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607576 Jy ! Component: 100 - total flux cleaned = 0.00994457 Jy ! Total flux subtracted in 100 components = 0.00994457 Jy ! Clean residual min=-0.003440 max=0.003605 Jy/beam ! Clean residual mean=-0.000004 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0902102 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.0902102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057671Jy sigma=0.960378 ! Fit after self-cal, rms=0.057614Jy sigma=0.959255 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8862 mas, bmaj=2.041 mas, bpa=-1.862 degrees ! Estimated noise=0.431463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537493 Jy ! Component: 100 - total flux cleaned = 0.00891377 Jy ! Component: 150 - total flux cleaned = 0.0115114 Jy ! Component: 200 - total flux cleaned = 0.0134391 Jy ! Total flux subtracted in 200 components = 0.0134391 Jy ! Clean residual min=-0.002275 max=0.002772 Jy/beam ! Clean residual mean=-0.000005 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.103649 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.103649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057088Jy sigma=0.941968 ! Fit after self-cal, rms=0.057013Jy sigma=0.940410 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8862 x 2.041 at -1.862 degrees (North through East) ! Clean map min=-0.0021286 max=0.061962 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.02 KP 1.04 ! LA 0.96 MK 0.92 NL 1.03 OV 0.98 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.09 KP 0.98 ! LA 0.97 MK 1.04 NL 1.02 OV 1.04 ! PT 0.91 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 KP 1.01 ! LA 0.90 MK 0.99 NL 1.05 OV 0.98 ! PT 0.97 SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 0.94 ! LA 0.96 MK 1.04 NL 1.07 OV 0.99 ! PT 0.93 SC 0.81 ! ! ! Fit before self-cal, rms=0.057013Jy sigma=0.940410 ! Fit after self-cal, rms=0.055760Jy sigma=0.936289 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8804 mas, bmaj=2.028 mas, bpa=-1.047 degrees ! Estimated noise=0.421365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152458 Jy ! Component: 100 - total flux cleaned = 0.00208582 Jy ! Component: 150 - total flux cleaned = 0.00249296 Jy ! Component: 200 - total flux cleaned = 0.00283261 Jy ! Total flux subtracted in 200 components = 0.00283261 Jy ! Clean residual min=-0.001941 max=0.002302 Jy/beam ! Clean residual mean=-0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.106482 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.106482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055683Jy sigma=0.933814 ! Fit after self-cal, rms=0.055690Jy sigma=0.933510 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055690Jy sigma=0.933510 ! Fit after self-cal, rms=0.055397Jy sigma=0.931297 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.875 mas, bmaj=2.021 mas, bpa=-0.6381 degrees ! Estimated noise=0.416846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.03161e-05 Jy ! Component: 100 - total flux cleaned = 0.000233806 Jy ! Component: 150 - total flux cleaned = 0.000416359 Jy ! Component: 200 - total flux cleaned = 0.000554357 Jy ! Total flux subtracted in 200 components = 0.000554357 Jy ! Clean residual min=-0.001802 max=0.002028 Jy/beam ! Clean residual mean=-0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.107036 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.107036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055371Jy sigma=0.930491 ! Fit after self-cal, rms=0.055368Jy sigma=0.930404 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.4, -16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208526 Jy ! Component: 100 - total flux cleaned = 0.00317192 Jy ! Component: 150 - total flux cleaned = 0.00364198 Jy ! Component: 200 - total flux cleaned = 0.0039927 Jy ! Total flux subtracted in 200 components = 0.0039927 Jy ! Clean residual min=-0.001726 max=0.001831 Jy/beam ! Clean residual mean=-0.000002 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.111029 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.111029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055279Jy sigma=0.928034 ! Fit after self-cal, rms=0.055262Jy sigma=0.927815 ! Inverting map ! Added new window around map position (28.2, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172312 Jy ! Component: 100 - total flux cleaned = 0.00248671 Jy ! Component: 150 - total flux cleaned = 0.00281911 Jy ! Component: 200 - total flux cleaned = 0.00306318 Jy ! Total flux subtracted in 200 components = 0.00306318 Jy ! Clean residual min=-0.001651 max=0.001512 Jy/beam ! Clean residual mean=-0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.114092 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 0.114092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055193Jy sigma=0.926242 ! Fit after self-cal, rms=0.055191Jy sigma=0.926130 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055191Jy sigma=0.926130 ! Fit after self-cal, rms=0.054872Jy sigma=0.925850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8727 mas, bmaj=2.014 mas, bpa=-0.2857 degrees ! Estimated noise=0.413406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393327 Jy ! Component: 100 - total flux cleaned = 0.00069184 Jy ! Component: 150 - total flux cleaned = 0.00086384 Jy ! Component: 200 - total flux cleaned = 0.000999942 Jy ! Total flux subtracted in 200 components = 0.000999942 Jy ! Clean residual min=-0.001603 max=0.001523 Jy/beam ! Clean residual mean=-0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.115092 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.115092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054845Jy sigma=0.925323 ! Fit after self-cal, rms=0.054844Jy sigma=0.925295 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228611 Jy ! Component: 100 - total flux cleaned = 0.000354751 Jy ! Component: 150 - total flux cleaned = 0.000453496 Jy ! Component: 200 - total flux cleaned = 0.000509467 Jy ! Total flux subtracted in 200 components = 0.000509467 Jy ! Clean residual min=-0.001585 max=0.001498 Jy/beam ! Clean residual mean=-0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.115602 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 0.115602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054828Jy sigma=0.924989 ! Fit after self-cal, rms=0.054825Jy sigma=0.924980 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054825Jy sigma=0.924980 ! Fit after self-cal, rms=0.054628Jy sigma=0.924903 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=3.57 mas, bpa=0.7145 degrees ! Estimated noise=0.506769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739648 Jy ! Component: 100 - total flux cleaned = 0.0010491 Jy ! Component: 150 - total flux cleaned = 0.001196 Jy ! Component: 200 - total flux cleaned = 0.00119633 Jy ! Total flux subtracted in 200 components = 0.00119633 Jy ! Clean residual min=-0.001380 max=0.001429 Jy/beam ! Clean residual mean=-0.000002 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.116798 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 113 components and 0.116798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054626Jy sigma=0.924751 ! Fit after self-cal, rms=0.054621Jy sigma=0.924716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144917 Jy ! Component: 100 - total flux cleaned = 0.00011393 Jy ! Component: 150 - total flux cleaned = 0.000114151 Jy ! Component: 200 - total flux cleaned = 9.97557e-05 Jy ! Total flux subtracted in 200 components = 9.97557e-05 Jy ! Clean residual min=-0.001349 max=0.001425 Jy/beam ! Clean residual mean=-0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.116898 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 121 components and 0.116898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054621Jy sigma=0.924670 ! Fit after self-cal, rms=0.054617Jy sigma=0.924656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.01 mas, bpa=-0.09892 degrees ! Estimated noise=0.411354 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.01 at -0.09892 degrees (North through East) ! Clean map min=-0.0013706 max=0.058906 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7025 mas, bmaj=1.769 mas, bpa=0.5076 degrees ! Estimated noise=0.725114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442978 Jy ! Component: 100 - total flux cleaned = 0.0638916 Jy ! Component: 150 - total flux cleaned = 0.0740912 Jy ! Component: 200 - total flux cleaned = 0.0809327 Jy ! Total flux subtracted in 200 components = 0.0809327 Jy ! Clean residual min=-0.003375 max=0.004419 Jy/beam ! Clean residual mean=-0.000004 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.0809326 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0809326 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.01 mas, bpa=-0.09892 degrees ! Estimated noise=0.411354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736998 Jy ! Component: 100 - total flux cleaned = 0.0125585 Jy ! Component: 150 - total flux cleaned = 0.0165678 Jy ! Component: 200 - total flux cleaned = 0.0197666 Jy ! Total flux subtracted in 200 components = 0.0197666 Jy ! Clean residual min=-0.002173 max=0.002445 Jy/beam ! Clean residual mean=-0.000004 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.100699 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 47 components and 0.100699 Jy ! Inverting map ! Added new window around map position (7.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271282 Jy ! Component: 100 - total flux cleaned = 0.00489035 Jy ! Component: 150 - total flux cleaned = 0.00672478 Jy ! Component: 200 - total flux cleaned = 0.00829071 Jy ! Total flux subtracted in 200 components = 0.00829071 Jy ! Clean residual min=-0.001771 max=0.001690 Jy/beam ! Clean residual mean=-0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.10899 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 74 components and 0.10899 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=3.57 mas, bpa=0.7145 degrees ! Estimated noise=0.506769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236851 Jy ! Component: 100 - total flux cleaned = 0.00401009 Jy ! Component: 150 - total flux cleaned = 0.00525072 Jy ! Component: 200 - total flux cleaned = 0.00622243 Jy ! Total flux subtracted in 200 components = 0.00622243 Jy ! Clean residual min=-0.001544 max=0.001464 Jy/beam ! Clean residual mean=-0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.115212 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775482 Jy ! Component: 100 - total flux cleaned = 0.00125977 Jy ! Component: 150 - total flux cleaned = 0.00148096 Jy ! Component: 200 - total flux cleaned = 0.00160069 Jy ! Total flux subtracted in 200 components = 0.00160069 Jy ! Clean residual min=-0.001445 max=0.001402 Jy/beam ! Clean residual mean=-0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.116813 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 110 components and 0.116813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.01 mas, bpa=-0.09892 degrees ! Estimated noise=0.411354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.78145e-06 Jy ! Component: 100 - total flux cleaned = -8.80405e-05 Jy ! Component: 150 - total flux cleaned = -8.80635e-05 Jy ! Component: 200 - total flux cleaned = -0.000113246 Jy ! Total flux subtracted in 200 components = -0.000113246 Jy ! Clean residual min=-0.001457 max=0.001481 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.1167 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.1167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054606Jy sigma=0.924434 ! Fit after self-cal, rms=0.054599Jy sigma=0.924201 wmodel J0132-0804_X_map.mod ! Writing 131 model components to file: J0132-0804_X_map.mod wobs J0132-0804_X_uvs.fits ! Writing UV FITS file: J0132-0804_X_uvs.fits wwins J0132-0804_X_map.win ! wwins: Wrote 5 windows to J0132-0804_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210874 Jy ! Component: 100 - total flux cleaned = -0.000387254 Jy ! Component: 150 - total flux cleaned = -0.000555579 Jy ! Component: 200 - total flux cleaned = -0.000717096 Jy ! Component: 250 - total flux cleaned = -0.000851056 Jy ! Component: 300 - total flux cleaned = -0.000960391 Jy ! Component: 350 - total flux cleaned = -0.00111044 Jy ! Component: 400 - total flux cleaned = -0.00121562 Jy ! Component: 450 - total flux cleaned = -0.00129814 Jy ! Component: 500 - total flux cleaned = -0.00137915 Jy ! Component: 550 - total flux cleaned = -0.00147867 Jy ! Component: 600 - total flux cleaned = -0.00155728 Jy ! Component: 650 - total flux cleaned = -0.00167343 Jy ! Component: 700 - total flux cleaned = -0.00171138 Jy ! Component: 750 - total flux cleaned = -0.0018434 Jy ! Component: 800 - total flux cleaned = -0.00186133 Jy ! Component: 850 - total flux cleaned = -0.00184284 Jy ! Component: 900 - total flux cleaned = -0.00186116 Jy ! Component: 950 - total flux cleaned = -0.0018074 Jy ! Component: 1000 - total flux cleaned = -0.00187899 Jy ! Component: 1050 - total flux cleaned = -0.00189654 Jy ! Component: 1100 - total flux cleaned = -0.00191402 Jy ! Component: 1150 - total flux cleaned = -0.00193128 Jy ! Component: 1200 - total flux cleaned = -0.00186294 Jy ! Component: 1250 - total flux cleaned = -0.00193092 Jy ! Component: 1300 - total flux cleaned = -0.00194767 Jy ! Component: 1350 - total flux cleaned = -0.00198072 Jy ! Component: 1400 - total flux cleaned = -0.00198084 Jy ! Component: 1450 - total flux cleaned = -0.00202974 Jy ! Component: 1500 - total flux cleaned = -0.00206205 Jy ! Component: 1550 - total flux cleaned = -0.00207801 Jy ! Component: 1600 - total flux cleaned = -0.00206208 Jy ! Component: 1650 - total flux cleaned = -0.00207792 Jy ! Component: 1700 - total flux cleaned = -0.0021094 Jy ! Component: 1750 - total flux cleaned = -0.00214042 Jy ! Component: 1800 - total flux cleaned = -0.00220183 Jy ! Component: 1850 - total flux cleaned = -0.00211014 Jy ! Component: 1900 - total flux cleaned = -0.00214031 Jy ! Component: 1950 - total flux cleaned = -0.00220058 Jy ! Component: 2000 - total flux cleaned = -0.00218564 Jy ! Component: 2050 - total flux cleaned = -0.00220032 Jy ! Component: 2100 - total flux cleaned = -0.00220048 Jy ! Component: 2150 - total flux cleaned = -0.00224418 Jy ! Component: 2200 - total flux cleaned = -0.00228741 Jy ! Component: 2250 - total flux cleaned = -0.00224422 Jy ! Component: 2300 - total flux cleaned = -0.002273 Jy ! Component: 2350 - total flux cleaned = -0.00231542 Jy ! Component: 2400 - total flux cleaned = -0.00227313 Jy ! Component: 2450 - total flux cleaned = -0.00235714 Jy ! Component: 2500 - total flux cleaned = -0.00235721 Jy ! Component: 2550 - total flux cleaned = -0.00239876 Jy ! Component: 2600 - total flux cleaned = -0.00242635 Jy ! Component: 2650 - total flux cleaned = -0.00241291 Jy ! Component: 2700 - total flux cleaned = -0.00249419 Jy ! Component: 2750 - total flux cleaned = -0.00253455 Jy ! Component: 2800 - total flux cleaned = -0.00256127 Jy ! Component: 2850 - total flux cleaned = -0.00256124 Jy ! Component: 2900 - total flux cleaned = -0.0026405 Jy ! Component: 2950 - total flux cleaned = -0.00273237 Jy ! Component: 3000 - total flux cleaned = -0.00270613 Jy ! Component: 3050 - total flux cleaned = -0.00275804 Jy ! Component: 3100 - total flux cleaned = -0.00282249 Jy ! Component: 3150 - total flux cleaned = -0.0027841 Jy ! Component: 3200 - total flux cleaned = -0.00288614 Jy ! Component: 3250 - total flux cleaned = -0.00287344 Jy ! Component: 3300 - total flux cleaned = -0.00293657 Jy ! Component: 3350 - total flux cleaned = -0.00297421 Jy ! Component: 3400 - total flux cleaned = -0.00299913 Jy ! Component: 3450 - total flux cleaned = -0.00302386 Jy ! Component: 3500 - total flux cleaned = -0.00306091 Jy ! Component: 3550 - total flux cleaned = -0.00308526 Jy ! Component: 3600 - total flux cleaned = -0.00313401 Jy ! Component: 3650 - total flux cleaned = -0.00321887 Jy ! Component: 3700 - total flux cleaned = -0.00323096 Jy ! Component: 3750 - total flux cleaned = -0.00326693 Jy ! Component: 3800 - total flux cleaned = -0.00335033 Jy ! Component: 3850 - total flux cleaned = -0.00335033 Jy ! Component: 3900 - total flux cleaned = -0.00340935 Jy ! Component: 3950 - total flux cleaned = -0.00345625 Jy ! Component: 4000 - total flux cleaned = -0.00353796 Jy ! Component: 4050 - total flux cleaned = -0.0036076 Jy ! Total flux subtracted in 4096 components = -0.00361912 Jy ! Clean residual min=-0.000779 max=0.000706 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.113081 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 448 components and 0.113081 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J0132-0804_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.01 at -0.09892 degrees (North through East) ! Clean map min=-0.0010628 max=0.058937 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0132-0804_X_map.fits wmodel /scr/pima/rv120_uvs/J0132-0804_X_map.mod ! Writing 448 model components to file: /scr/pima/rv120_uvs/J0132-0804_X_map.mod wobs /scr/pima/rv120_uvs/J0132-0804_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J0132-0804_X_uvs.fits wwins /scr/pima/rv120_uvs/J0132-0804_X_map.win ! wwins: Wrote 6 windows to /scr/pima/rv120_uvs/J0132-0804_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0589368 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196561 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00053 1.00053 2.00107 4.00214 8.00427 16.0085 32.0171 64.0342 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.058 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 299.839 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J0132-0804_X_dfm.log closed on Fri Dec 22 22:38:23 2017