! Started logfile: /scr/pima/rv120_uvs/J0132-0804_S_dfm.log on Fri Dec 22 22:29:17 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv120_uvs/J0132-0804_S_uva.fits ! Reading UV FITS file: /scr/pima/rv120_uvs/J0132-0804_S_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.857683 visibilities/baseline/integration-bin. ! Found source: J0132-0804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7256 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0132-0804_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003814Jy sigma=21.378829 ! Fit after self-cal, rms=0.911302Jy sigma=19.349691 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=6.316 mas, bpa=-1.76 degrees ! Estimated noise=0.715419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.067952 Jy ! Component: 100 - total flux cleaned = 0.0833226 Jy ! Total flux subtracted in 100 components = 0.0833226 Jy ! Clean residual min=-0.008124 max=0.026331 Jy/beam ! Clean residual mean=-0.000012 rms=0.002298 Jy/beam ! Combined flux in latest and established models = 0.0833225 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0833225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071745Jy sigma=1.474779 ! Fit after self-cal, rms=0.071561Jy sigma=1.469977 ! Inverting map ! Added new window around map position (6.5, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218674 Jy ! Component: 100 - total flux cleaned = 0.0310993 Jy ! Total flux subtracted in 100 components = 0.0310993 Jy ! Clean residual min=-0.005860 max=0.009294 Jy/beam ! Clean residual mean=-0.000008 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.114422 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.114422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064036Jy sigma=1.293999 ! Fit after self-cal, rms=0.062464Jy sigma=1.264611 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948993 Jy ! Component: 100 - total flux cleaned = 0.0148781 Jy ! Total flux subtracted in 100 components = 0.0148781 Jy ! Clean residual min=-0.004512 max=0.005291 Jy/beam ! Clean residual mean=-0.000006 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.1293 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.1293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060632Jy sigma=1.217315 ! Fit after self-cal, rms=0.060362Jy sigma=1.212190 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.256 mas, bpa=-1.358 degrees ! Estimated noise=0.427074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721891 Jy ! Component: 100 - total flux cleaned = 0.0114351 Jy ! Component: 150 - total flux cleaned = 0.0143283 Jy ! Component: 200 - total flux cleaned = 0.0163301 Jy ! Total flux subtracted in 200 components = 0.0163301 Jy ! Clean residual min=-0.003766 max=0.004542 Jy/beam ! Clean residual mean=-0.000006 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.14563 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 65 components and 0.14563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059527Jy sigma=1.188650 ! Fit after self-cal, rms=0.059433Jy sigma=1.186707 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.099 x 7.256 at -1.358 degrees (North through East) ! Clean map min=-0.003356 max=0.087211 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.10 KP 0.94 ! LA 0.95 MK 1.02 NL 1.08 OV 0.96 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 1.08 KP 0.96 ! LA 0.96 MK 0.98 NL 0.99 OV 0.98 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 1.09 HN 1.08 KP 1.00* ! LA 1.54 MK 0.82 NL 1.00* OV 1.00 ! PT 1.05 SC 0.84 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.01 KP 0.97 ! LA 1.00 MK 0.99 NL 0.98 OV 0.84 ! PT 0.94 SC 1.10 ! ! ! Fit before self-cal, rms=0.059433Jy sigma=1.186707 ! Fit after self-cal, rms=0.061297Jy sigma=1.160937 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=7.283 mas, bpa=-1.642 degrees ! Estimated noise=0.422811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196241 Jy ! Component: 100 - total flux cleaned = 0.000405287 Jy ! Component: 150 - total flux cleaned = 0.000492175 Jy ! Component: 200 - total flux cleaned = 0.000492048 Jy ! Total flux subtracted in 200 components = 0.000492048 Jy ! Clean residual min=-0.002604 max=0.003237 Jy/beam ! Clean residual mean=0.000001 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.146122 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.146122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061220Jy sigma=1.158925 ! Fit after self-cal, rms=0.061553Jy sigma=1.157210 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061553Jy sigma=1.157210 ! Fit after self-cal, rms=0.069030Jy sigma=1.140173 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=7.284 mas, bpa=-1.511 degrees ! Estimated noise=0.421595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649528 Jy ! Component: 100 - total flux cleaned = 0.000708958 Jy ! Component: 150 - total flux cleaned = 0.000786665 Jy ! Component: 200 - total flux cleaned = 0.000854976 Jy ! Total flux subtracted in 200 components = 0.000854976 Jy ! Clean residual min=-0.002266 max=0.002528 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.146977 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.146977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069004Jy sigma=1.139289 ! Fit after self-cal, rms=0.069243Jy sigma=1.137406 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-56.5, 117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224562 Jy ! Component: 100 - total flux cleaned = 0.00260126 Jy ! Component: 150 - total flux cleaned = 0.00268583 Jy ! Component: 200 - total flux cleaned = 0.00272124 Jy ! Total flux subtracted in 200 components = 0.00272124 Jy ! Clean residual min=-0.002234 max=0.002359 Jy/beam ! Clean residual mean=0.000000 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.149698 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.149698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069107Jy sigma=1.135581 ! Fit after self-cal, rms=0.069118Jy sigma=1.135406 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069118Jy sigma=1.135406 ! Fit after self-cal, rms=0.069060Jy sigma=1.134902 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=7.278 mas, bpa=-1.641 degrees ! Estimated noise=0.420582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674699 Jy ! Component: 100 - total flux cleaned = 0.000960205 Jy ! Component: 150 - total flux cleaned = 0.0010856 Jy ! Component: 200 - total flux cleaned = 0.00117118 Jy ! Total flux subtracted in 200 components = 0.00117118 Jy ! Clean residual min=-0.002232 max=0.002333 Jy/beam ! Clean residual mean=0.000000 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.15087 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.15087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069015Jy sigma=1.134329 ! Fit after self-cal, rms=0.069152Jy sigma=1.134159 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018252 Jy ! Component: 100 - total flux cleaned = 0.000237388 Jy ! Component: 150 - total flux cleaned = 0.000314316 Jy ! Component: 200 - total flux cleaned = 0.000338741 Jy ! Total flux subtracted in 200 components = 0.000338741 Jy ! Clean residual min=-0.002234 max=0.002412 Jy/beam ! Clean residual mean=0.000000 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.151208 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 112 components and 0.151208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069124Jy sigma=1.133806 ! Fit after self-cal, rms=0.069134Jy sigma=1.133776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069134Jy sigma=1.133776 ! Fit after self-cal, rms=0.069078Jy sigma=1.133560 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=12.22 mas, bpa=2.286 degrees ! Estimated noise=0.539495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212198 Jy ! Component: 100 - total flux cleaned = 0.000455344 Jy ! Component: 150 - total flux cleaned = 0.000638879 Jy ! Component: 200 - total flux cleaned = 0.000788248 Jy ! Total flux subtracted in 200 components = 0.000788248 Jy ! Clean residual min=-0.002157 max=0.002605 Jy/beam ! Clean residual mean=0.000001 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.151997 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 0.151997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069057Jy sigma=1.133674 ! Fit after self-cal, rms=0.069118Jy sigma=1.133557 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.56254e-05 Jy ! Component: 100 - total flux cleaned = 7.58884e-05 Jy ! Component: 150 - total flux cleaned = 0.000129095 Jy ! Component: 200 - total flux cleaned = 0.00019182 Jy ! Total flux subtracted in 200 components = 0.00019182 Jy ! Clean residual min=-0.002194 max=0.002656 Jy/beam ! Clean residual mean=0.000001 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.152188 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 0.152188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069109Jy sigma=1.133671 ! Fit after self-cal, rms=0.069118Jy sigma=1.133645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=7.278 mas, bpa=-1.734 degrees ! Estimated noise=0.420779 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 7.278 at -1.734 degrees (North through East) ! Clean map min=-0.0021157 max=0.085501 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=6.352 mas, bpa=-2.378 degrees ! Estimated noise=0.704856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0688121 Jy ! Component: 100 - total flux cleaned = 0.0961955 Jy ! Component: 150 - total flux cleaned = 0.110455 Jy ! Component: 200 - total flux cleaned = 0.12005 Jy ! Total flux subtracted in 200 components = 0.12005 Jy ! Clean residual min=-0.003814 max=0.005262 Jy/beam ! Clean residual mean=-0.000004 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.12005 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.12005 Jy ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=7.278 mas, bpa=-1.734 degrees ! Estimated noise=0.420779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985022 Jy ! Component: 100 - total flux cleaned = 0.0159064 Jy ! Component: 150 - total flux cleaned = 0.0200013 Jy ! Component: 200 - total flux cleaned = 0.0229805 Jy ! Total flux subtracted in 200 components = 0.0229805 Jy ! Clean residual min=-0.002584 max=0.002722 Jy/beam ! Clean residual mean=-0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.143031 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.143031 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=12.22 mas, bpa=2.286 degrees ! Estimated noise=0.539495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338882 Jy ! Component: 100 - total flux cleaned = 0.00547933 Jy ! Component: 150 - total flux cleaned = 0.00629638 Jy ! Component: 200 - total flux cleaned = 0.00687281 Jy ! Total flux subtracted in 200 components = 0.00687281 Jy ! Clean residual min=-0.002410 max=0.002729 Jy/beam ! Clean residual mean=0.000000 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.149904 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395892 Jy ! Component: 100 - total flux cleaned = 0.000733814 Jy ! Component: 150 - total flux cleaned = 0.00102191 Jy ! Component: 200 - total flux cleaned = 0.00124293 Jy ! Total flux subtracted in 200 components = 0.00124293 Jy ! Clean residual min=-0.002243 max=0.002744 Jy/beam ! Clean residual mean=0.000001 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.151147 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 100 components and 0.151147 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=7.278 mas, bpa=-1.734 degrees ! Estimated noise=0.420779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00061111 Jy ! Component: 100 - total flux cleaned = 0.000789915 Jy ! Component: 150 - total flux cleaned = 0.000788894 Jy ! Component: 200 - total flux cleaned = 0.000752465 Jy ! Total flux subtracted in 200 components = 0.000752465 Jy ! Clean residual min=-0.002220 max=0.002469 Jy/beam ! Clean residual mean=0.000000 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.151899 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.151899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069168Jy sigma=1.135008 ! Fit after self-cal, rms=0.069189Jy sigma=1.134755 wmodel J0132-0804_S_map.mod ! Writing 113 model components to file: J0132-0804_S_map.mod wobs J0132-0804_S_uvs.fits ! Writing UV FITS file: J0132-0804_S_uvs.fits wwins J0132-0804_S_map.win ! wwins: Wrote 3 windows to J0132-0804_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809588 Jy ! Component: 100 - total flux cleaned = 0.00150931 Jy ! Component: 150 - total flux cleaned = 0.00193981 Jy ! Component: 200 - total flux cleaned = 0.00227602 Jy ! Component: 250 - total flux cleaned = 0.00259958 Jy ! Component: 300 - total flux cleaned = 0.00287964 Jy ! Component: 350 - total flux cleaned = 0.00318639 Jy ! Component: 400 - total flux cleaned = 0.0033856 Jy ! Component: 450 - total flux cleaned = 0.00348373 Jy ! Component: 500 - total flux cleaned = 0.00364295 Jy ! Component: 550 - total flux cleaned = 0.00379885 Jy ! Component: 600 - total flux cleaned = 0.00398175 Jy ! Component: 650 - total flux cleaned = 0.00407194 Jy ! Component: 700 - total flux cleaned = 0.00424921 Jy ! Component: 750 - total flux cleaned = 0.00442271 Jy ! Component: 800 - total flux cleaned = 0.00453647 Jy ! Component: 850 - total flux cleaned = 0.00462024 Jy ! Component: 900 - total flux cleaned = 0.00464804 Jy ! Component: 950 - total flux cleaned = 0.00470289 Jy ! Component: 1000 - total flux cleaned = 0.00486427 Jy ! Component: 1050 - total flux cleaned = 0.00491715 Jy ! Component: 1100 - total flux cleaned = 0.004996 Jy ! Component: 1150 - total flux cleaned = 0.00507373 Jy ! Component: 1200 - total flux cleaned = 0.00515044 Jy ! Component: 1250 - total flux cleaned = 0.00525112 Jy ! Component: 1300 - total flux cleaned = 0.00535035 Jy ! Component: 1350 - total flux cleaned = 0.00552216 Jy ! Component: 1400 - total flux cleaned = 0.00561897 Jy ! Component: 1450 - total flux cleaned = 0.00571482 Jy ! Component: 1500 - total flux cleaned = 0.00585775 Jy ! Component: 1550 - total flux cleaned = 0.00599826 Jy ! Component: 1600 - total flux cleaned = 0.00613726 Jy ! Component: 1650 - total flux cleaned = 0.00627477 Jy ! Component: 1700 - total flux cleaned = 0.00647862 Jy ! Component: 1750 - total flux cleaned = 0.00650083 Jy ! Component: 1800 - total flux cleaned = 0.00656759 Jy ! Component: 1850 - total flux cleaned = 0.00665556 Jy ! Component: 1900 - total flux cleaned = 0.00678592 Jy ! Component: 1950 - total flux cleaned = 0.00676415 Jy ! Component: 2000 - total flux cleaned = 0.00682836 Jy ! Component: 2050 - total flux cleaned = 0.00699747 Jy ! Component: 2100 - total flux cleaned = 0.00703972 Jy ! Component: 2150 - total flux cleaned = 0.00712285 Jy ! Component: 2200 - total flux cleaned = 0.00728793 Jy ! Component: 2250 - total flux cleaned = 0.00743044 Jy ! Component: 2300 - total flux cleaned = 0.00751123 Jy ! Component: 2350 - total flux cleaned = 0.00761203 Jy ! Component: 2400 - total flux cleaned = 0.00781116 Jy ! Component: 2450 - total flux cleaned = 0.00788999 Jy ! Component: 2500 - total flux cleaned = 0.00804659 Jy ! Component: 2550 - total flux cleaned = 0.00818269 Jy ! Component: 2600 - total flux cleaned = 0.00831781 Jy ! Component: 2650 - total flux cleaned = 0.00847078 Jy ! Component: 2700 - total flux cleaned = 0.00862256 Jy ! Component: 2750 - total flux cleaned = 0.00873571 Jy ! Component: 2800 - total flux cleaned = 0.00881066 Jy ! Component: 2850 - total flux cleaned = 0.00897802 Jy ! Component: 2900 - total flux cleaned = 0.00912558 Jy ! Component: 2950 - total flux cleaned = 0.00919884 Jy ! Component: 3000 - total flux cleaned = 0.00938062 Jy ! Component: 3050 - total flux cleaned = 0.00950707 Jy ! Component: 3100 - total flux cleaned = 0.00954299 Jy ! Component: 3150 - total flux cleaned = 0.00966768 Jy ! Component: 3200 - total flux cleaned = 0.00977394 Jy ! Component: 3250 - total flux cleaned = 0.00987929 Jy ! Component: 3300 - total flux cleaned = 0.00991429 Jy ! Component: 3350 - total flux cleaned = 0.00996633 Jy ! Component: 3400 - total flux cleaned = 0.00996649 Jy ! Component: 3450 - total flux cleaned = 0.0101208 Jy ! Component: 3500 - total flux cleaned = 0.0101549 Jy ! Component: 3550 - total flux cleaned = 0.0102732 Jy ! Component: 3600 - total flux cleaned = 0.0103739 Jy ! Component: 3650 - total flux cleaned = 0.010491 Jy ! Component: 3700 - total flux cleaned = 0.010524 Jy ! Component: 3750 - total flux cleaned = 0.0106066 Jy ! Component: 3800 - total flux cleaned = 0.0107541 Jy ! Component: 3850 - total flux cleaned = 0.0108356 Jy ! Component: 3900 - total flux cleaned = 0.0109165 Jy ! Component: 3950 - total flux cleaned = 0.0110294 Jy ! Component: 4000 - total flux cleaned = 0.0111095 Jy ! Component: 4050 - total flux cleaned = 0.0111414 Jy ! Total flux subtracted in 4096 components = 0.0112683 Jy ! Clean residual min=-0.001152 max=0.000952 Jy/beam ! Clean residual mean=-0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.163167 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 438 components and 0.163167 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv120_uvs/J0132-0804_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 7.278 at -1.734 degrees (North through East) ! Clean map min=-0.0014679 max=0.08545 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0132-0804_S_map.fits wmodel /scr/pima/rv120_uvs/J0132-0804_S_map.mod ! Writing 438 model components to file: /scr/pima/rv120_uvs/J0132-0804_S_map.mod wobs /scr/pima/rv120_uvs/J0132-0804_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv120_uvs/J0132-0804_S_uvs.fits wwins /scr/pima/rv120_uvs/J0132-0804_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv120_uvs/J0132-0804_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0854502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000287479 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00929 1.00929 2.01857 4.03714 8.07428 16.1486 32.2971 64.5943 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.085 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 297.24 quit ! Quitting program ! Log file /scr/pima/rv120_uvs/J0132-0804_S_dfm.log closed on Fri Dec 22 22:29:22 2017