! Started logfile: /scr/pima/rv120_uvs/J0130+0842_X_dfm.log on Fri Dec 22 22:38:13 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv120_uvs/J0130+0842_X_uva.fits
! Reading UV FITS file: /scr/pima/rv120_uvs/J0130+0842_X_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.885926 visibilities/baseline/integration-bin.
! Found source: J0130+0842
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0130+0842_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007403Jy  sigma=21.619654
! Fit after  self-cal, rms=0.906111Jy  sigma=19.421934
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7196 mas, bmaj=1.744 mas, bpa=-1.352 degrees
! Estimated noise=0.724984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0751484 Jy
! Component: 100  -  total flux cleaned = 0.0915817 Jy
! Total flux subtracted in 100 components = 0.0915817 Jy
! Clean residual min=-0.004237 max=0.005015 Jy/beam
! Clean residual mean=0.000000 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.0915817 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0915817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057418Jy  sigma=0.960365
! Fit after  self-cal, rms=0.057379Jy  sigma=0.959412
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033311 Jy
! Component: 100  -  total flux cleaned = 0.00304706 Jy
! Total flux subtracted in 100 components = 0.00304706 Jy
! Clean residual min=-0.003653 max=0.003053 Jy/beam
! Clean residual mean=0.000000 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.0946288 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.0946288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057036Jy  sigma=0.949446
! Fit after  self-cal, rms=0.057032Jy  sigma=0.949303
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9011 mas, bmaj=1.961 mas, bpa=-0.9167 degrees
! Estimated noise=0.420881 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296217 Jy
! Component: 100  -  total flux cleaned = 0.00343605 Jy
! Component: 150  -  total flux cleaned = 0.0036897 Jy
! Component: 200  -  total flux cleaned = 0.00386111 Jy
! Total flux subtracted in 200 components = 0.00386111 Jy
! Clean residual min=-0.001936 max=0.002323 Jy/beam
! Clean residual mean=-0.000001 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0984899 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 33 components and 0.0984899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056867Jy  sigma=0.944218
! Fit after  self-cal, rms=0.056857Jy  sigma=0.943936
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9011 x 1.961 at -0.9167 degrees (North through East)
! Clean map  min=-0.0017989  max=0.095144 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.06     KP        1.03     
!   LA        0.99     MK        0.93     NL        1.02     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.08     KP        1.01     
!   LA        1.03     MK        0.93     NL        0.98     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        1.16     KP        1.04     
!   LA        0.96     MK        0.94     NL        0.97     OV        1.01     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.03     KP        1.01     
!   LA        0.92     MK        0.95     NL        0.97     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.056857Jy  sigma=0.943936
! Fit after  self-cal, rms=0.057574Jy  sigma=0.938928
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8925 mas, bmaj=1.964 mas, bpa=-1.144 degrees
! Estimated noise=0.418733 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423314 Jy
! Component: 100  -  total flux cleaned = 0.000549196 Jy
! Component: 150  -  total flux cleaned = 0.000657602 Jy
! Component: 200  -  total flux cleaned = 0.000704921 Jy
! Total flux subtracted in 200 components = 0.000704921 Jy
! Clean residual min=-0.001689 max=0.001834 Jy/beam
! Clean residual mean=-0.000001 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0991948 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.0991948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057537Jy  sigma=0.938297
! Fit after  self-cal, rms=0.057568Jy  sigma=0.938197
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057568Jy  sigma=0.938197
! Fit after  self-cal, rms=0.057723Jy  sigma=0.936536
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.891 mas, bmaj=1.962 mas, bpa=-1.118 degrees
! Estimated noise=0.418557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.78441e-05 Jy
! Component: 100  -  total flux cleaned = -5.25744e-05 Jy
! Component: 150  -  total flux cleaned = -3.30499e-05 Jy
! Component: 200  -  total flux cleaned = -3.30693e-05 Jy
! Total flux subtracted in 200 components = -3.30693e-05 Jy
! Clean residual min=-0.001695 max=0.001800 Jy/beam
! Clean residual mean=-0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0991617 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.0991617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057706Jy  sigma=0.936228
! Fit after  self-cal, rms=0.057710Jy  sigma=0.936201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-18.6, -45.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143519 Jy
! Component: 100  -  total flux cleaned = 0.00162076 Jy
! Component: 150  -  total flux cleaned = 0.0016405 Jy
! Component: 200  -  total flux cleaned = 0.00164022 Jy
! Total flux subtracted in 200 components = 0.00164022 Jy
! Clean residual min=-0.001689 max=0.001574 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.100802 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 67 components and 0.100802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057654Jy  sigma=0.935430
! Fit after  self-cal, rms=0.057650Jy  sigma=0.935352
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057650Jy  sigma=0.935352
! Fit after  self-cal, rms=0.057594Jy  sigma=0.935255
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8906 mas, bmaj=1.96 mas, bpa=-1.096 degrees
! Estimated noise=0.418334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200191 Jy
! Component: 100  -  total flux cleaned = 0.00031762 Jy
! Component: 150  -  total flux cleaned = 0.000352902 Jy
! Component: 200  -  total flux cleaned = 0.000352919 Jy
! Total flux subtracted in 200 components = 0.000352919 Jy
! Clean residual min=-0.001666 max=0.001557 Jy/beam
! Clean residual mean=-0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.101155 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 74 components and 0.101155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057575Jy  sigma=0.935014
! Fit after  self-cal, rms=0.057573Jy  sigma=0.935006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.04666e-05 Jy
! Component: 100  -  total flux cleaned = 5.21289e-05 Jy
! Component: 150  -  total flux cleaned = 8.22399e-05 Jy
! Component: 200  -  total flux cleaned = 9.70205e-05 Jy
! Total flux subtracted in 200 components = 9.70205e-05 Jy
! Clean residual min=-0.001636 max=0.001570 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.101252 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 83 components and 0.101252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057562Jy  sigma=0.934876
! Fit after  self-cal, rms=0.057562Jy  sigma=0.934874
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057562Jy  sigma=0.934874
! Fit after  self-cal, rms=0.057508Jy  sigma=0.934848
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.124 mas, bmaj=3.01 mas, bpa=-0.7492 degrees
! Estimated noise=0.505851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.75959e-05 Jy
! Component: 100  -  total flux cleaned = -2.26429e-05 Jy
! Component: 150  -  total flux cleaned = 6.38839e-05 Jy
! Component: 200  -  total flux cleaned = 0.000140569 Jy
! Total flux subtracted in 200 components = 0.000140569 Jy
! Clean residual min=-0.001841 max=0.001699 Jy/beam
! Clean residual mean=-0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.101392 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.101392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057506Jy  sigma=0.934726
! Fit after  self-cal, rms=0.057503Jy  sigma=0.934713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.04172e-05 Jy
! Component: 100  -  total flux cleaned = 4.30011e-05 Jy
! Component: 150  -  total flux cleaned = 6.39259e-05 Jy
! Component: 200  -  total flux cleaned = 9.19575e-05 Jy
! Total flux subtracted in 200 components = 9.19575e-05 Jy
! Clean residual min=-0.001815 max=0.001711 Jy/beam
! Clean residual mean=-0.000002 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.101484 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 97 components and 0.101484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057502Jy  sigma=0.934697
! Fit after  self-cal, rms=0.057501Jy  sigma=0.934690
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8902 mas, bmaj=1.959 mas, bpa=-1.072 degrees
! Estimated noise=0.418277 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8902 x 1.959 at -1.072 degrees (North through East)
! Clean map  min=-0.001496  max=0.094853 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7114 mas, bmaj=1.746 mas, bpa=-1.33 degrees
! Estimated noise=0.715738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0742826 Jy
! Component: 100  -  total flux cleaned = 0.0906214 Jy
! Component: 150  -  total flux cleaned = 0.0958934 Jy
! Component: 200  -  total flux cleaned = 0.0981016 Jy
! Total flux subtracted in 200 components = 0.0981016 Jy
! Clean residual min=-0.002664 max=0.002915 Jy/beam
! Clean residual mean=-0.000000 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.0981016 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0981016 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8902 mas, bmaj=1.959 mas, bpa=-1.072 degrees
! Estimated noise=0.418277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195003 Jy
! Component: 100  -  total flux cleaned = 0.00237419 Jy
! Component: 150  -  total flux cleaned = 0.00266628 Jy
! Component: 200  -  total flux cleaned = 0.00275097 Jy
! Total flux subtracted in 200 components = 0.00275097 Jy
! Clean residual min=-0.001859 max=0.001583 Jy/beam
! Clean residual mean=-0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.100853 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 35 components and 0.100853 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.124 mas, bmaj=3.01 mas, bpa=-0.7492 degrees
! Estimated noise=0.505851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182861 Jy
! Component: 100  -  total flux cleaned = -0.000126787 Jy
! Component: 150  -  total flux cleaned = -7.71088e-05 Jy
! Component: 200  -  total flux cleaned = -3.28903e-05 Jy
! Total flux subtracted in 200 components = -3.28903e-05 Jy
! Clean residual min=-0.001797 max=0.001694 Jy/beam
! Clean residual mean=-0.000003 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.10082 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.18811e-05 Jy
! Component: 100  -  total flux cleaned = 0.0001187 Jy
! Component: 150  -  total flux cleaned = 0.00018757 Jy
! Component: 200  -  total flux cleaned = 0.000235235 Jy
! Total flux subtracted in 200 components = 0.000235235 Jy
! Clean residual min=-0.001787 max=0.001702 Jy/beam
! Clean residual mean=-0.000002 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.101055 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 55 components and 0.101055 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8902 mas, bmaj=1.959 mas, bpa=-1.072 degrees
! Estimated noise=0.418277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000444246 Jy
! Component: 100  -  total flux cleaned = 0.00044706 Jy
! Component: 150  -  total flux cleaned = 0.000394242 Jy
! Component: 200  -  total flux cleaned = 0.000318973 Jy
! Total flux subtracted in 200 components = 0.000318973 Jy
! Clean residual min=-0.001709 max=0.001558 Jy/beam
! Clean residual mean=-0.000001 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.101374 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 72 components and 0.101374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057542Jy  sigma=0.935482
! Fit after  self-cal, rms=0.057545Jy  sigma=0.935410
wmodel J0130+0842_X_map.mod
! Writing 72 model components to file: J0130+0842_X_map.mod
wobs   J0130+0842_X_uvs.fits
! Writing UV FITS file: J0130+0842_X_uvs.fits
wwins  J0130+0842_X_map.win
! wwins: Wrote 3 windows to J0130+0842_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284455 Jy
! Component: 100  -  total flux cleaned = -0.000425612 Jy
! Component: 150  -  total flux cleaned = -0.000641331 Jy
! Component: 200  -  total flux cleaned = -0.000796348 Jy
! Component: 250  -  total flux cleaned = -0.000896653 Jy
! Component: 300  -  total flux cleaned = -0.00101887 Jy
! Component: 350  -  total flux cleaned = -0.0010424 Jy
! Component: 400  -  total flux cleaned = -0.00106628 Jy
! Component: 450  -  total flux cleaned = -0.00108958 Jy
! Component: 500  -  total flux cleaned = -0.0011351 Jy
! Component: 550  -  total flux cleaned = -0.00111332 Jy
! Component: 600  -  total flux cleaned = -0.00120103 Jy
! Component: 650  -  total flux cleaned = -0.00120042 Jy
! Component: 700  -  total flux cleaned = -0.00115706 Jy
! Component: 750  -  total flux cleaned = -0.00117727 Jy
! Component: 800  -  total flux cleaned = -0.00117672 Jy
! Component: 850  -  total flux cleaned = -0.00123742 Jy
! Component: 900  -  total flux cleaned = -0.0011774 Jy
! Component: 950  -  total flux cleaned = -0.00129684 Jy
! Component: 1000  -  total flux cleaned = -0.00133622 Jy
! Component: 1050  -  total flux cleaned = -0.00137526 Jy
! Component: 1100  -  total flux cleaned = -0.00143331 Jy
! Component: 1150  -  total flux cleaned = -0.00150956 Jy
! Component: 1200  -  total flux cleaned = -0.00150953 Jy
! Component: 1250  -  total flux cleaned = -0.00160273 Jy
! Component: 1300  -  total flux cleaned = -0.00163943 Jy
! Component: 1350  -  total flux cleaned = -0.00163952 Jy
! Component: 1400  -  total flux cleaned = -0.00171205 Jy
! Component: 1450  -  total flux cleaned = -0.00176579 Jy
! Component: 1500  -  total flux cleaned = -0.00176588 Jy
! Component: 1550  -  total flux cleaned = -0.00180114 Jy
! Component: 1600  -  total flux cleaned = -0.0018361 Jy
! Component: 1650  -  total flux cleaned = -0.00183586 Jy
! Component: 1700  -  total flux cleaned = -0.00193921 Jy
! Component: 1750  -  total flux cleaned = -0.00193897 Jy
! Component: 1800  -  total flux cleaned = -0.00200661 Jy
! Component: 1850  -  total flux cleaned = -0.00198978 Jy
! Component: 1900  -  total flux cleaned = -0.0019733 Jy
! Component: 1950  -  total flux cleaned = -0.00207234 Jy
! Component: 2000  -  total flux cleaned = -0.00208856 Jy
! Component: 2050  -  total flux cleaned = -0.0021049 Jy
! Component: 2100  -  total flux cleaned = -0.00212093 Jy
! Component: 2150  -  total flux cleaned = -0.00210473 Jy
! Component: 2200  -  total flux cleaned = -0.00215271 Jy
! Component: 2250  -  total flux cleaned = -0.00216865 Jy
! Component: 2300  -  total flux cleaned = -0.00221573 Jy
! Component: 2350  -  total flux cleaned = -0.00220014 Jy
! Component: 2400  -  total flux cleaned = -0.00223127 Jy
! Component: 2450  -  total flux cleaned = -0.00226217 Jy
! Component: 2500  -  total flux cleaned = -0.00227741 Jy
! Component: 2550  -  total flux cleaned = -0.00224707 Jy
! Component: 2600  -  total flux cleaned = -0.00230767 Jy
! Component: 2650  -  total flux cleaned = -0.00235276 Jy
! Component: 2700  -  total flux cleaned = -0.00232297 Jy
! Component: 2750  -  total flux cleaned = -0.00239739 Jy
! Component: 2800  -  total flux cleaned = -0.00233828 Jy
! Component: 2850  -  total flux cleaned = -0.00241188 Jy
! Component: 2900  -  total flux cleaned = -0.00245577 Jy
! Component: 2950  -  total flux cleaned = -0.0024849 Jy
! Component: 3000  -  total flux cleaned = -0.00251392 Jy
! Component: 3050  -  total flux cleaned = -0.00254268 Jy
! Component: 3100  -  total flux cleaned = -0.0025426 Jy
! Component: 3150  -  total flux cleaned = -0.0025569 Jy
! Component: 3200  -  total flux cleaned = -0.00258525 Jy
! Component: 3250  -  total flux cleaned = -0.00258526 Jy
! Component: 3300  -  total flux cleaned = -0.00257129 Jy
! Component: 3350  -  total flux cleaned = -0.00258526 Jy
! Component: 3400  -  total flux cleaned = -0.00261313 Jy
! Component: 3450  -  total flux cleaned = -0.00258553 Jy
! Component: 3500  -  total flux cleaned = -0.00261306 Jy
! Component: 3550  -  total flux cleaned = -0.00268147 Jy
! Component: 3600  -  total flux cleaned = -0.00268145 Jy
! Component: 3650  -  total flux cleaned = -0.00269507 Jy
! Component: 3700  -  total flux cleaned = -0.00270849 Jy
! Component: 3750  -  total flux cleaned = -0.00272191 Jy
! Component: 3800  -  total flux cleaned = -0.0027353 Jy
! Component: 3850  -  total flux cleaned = -0.0027353 Jy
! Component: 3900  -  total flux cleaned = -0.00272214 Jy
! Component: 3950  -  total flux cleaned = -0.00276166 Jy
! Component: 4000  -  total flux cleaned = -0.00274861 Jy
! Component: 4050  -  total flux cleaned = -0.00278769 Jy
! Total flux subtracted in 4096 components = -0.00280069 Jy
! Clean residual min=-0.000907 max=0.000753 Jy/beam
! Clean residual mean=-0.000001 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.0985732 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 374 components and 0.0985732 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv120_uvs/J0130+0842_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8902 x 1.959 at -1.072 degrees (North through East)
! Clean map  min=-0.0012549  max=0.09449 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv120_uvs/J0130+0842_X_map.fits
wmodel /scr/pima/rv120_uvs/J0130+0842_X_map.mod
! Writing 374 model components to file: /scr/pima/rv120_uvs/J0130+0842_X_map.mod
wobs   /scr/pima/rv120_uvs/J0130+0842_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv120_uvs/J0130+0842_X_uvs.fits
wwins  /scr/pima/rv120_uvs/J0130+0842_X_map.win
! wwins: Wrote 4 windows to /scr/pima/rv120_uvs/J0130+0842_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0944897 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216769 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.688231 0.688231 1.37646 2.75292 5.50585 11.0117 22.0234 44.0468 88.0935
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.094 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  435.9 
quit
! Quitting program
! Log file /scr/pima/rv120_uvs/J0130+0842_X_dfm.log closed on Fri Dec 22 22:38:18 2017