! Started logfile: /scr/pima/rv119_uvs/J2350+0227_S_dfm.log on Sun Dec 17 11:39:39 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J2350+0227_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J2350+0227_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924242 visibilities/baseline/integration-bin.
! Found source: J2350+0227
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2350+0227_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008538Jy  sigma=18.247318
! Fit after  self-cal, rms=0.964424Jy  sigma=17.527253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.891 mas, bmaj=6.662 mas, bpa=-2.865 degrees
! Estimated noise=0.746482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311163 Jy
! Component: 100  -  total flux cleaned = 0.0358879 Jy
! Total flux subtracted in 100 components = 0.0358879 Jy
! Clean residual min=-0.004930 max=0.006590 Jy/beam
! Clean residual mean=0.000001 rms=0.001342 Jy/beam
! Combined flux in latest and established models = 0.0358879 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0358879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108408Jy  sigma=1.213304
! Fit after  self-cal, rms=0.106951Jy  sigma=1.173202
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.396 mas, bmaj=7.287 mas, bpa=-2.347 degrees
! Estimated noise=0.487298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00399257 Jy
! Component: 100  -  total flux cleaned = 0.00421925 Jy
! Component: 150  -  total flux cleaned = 0.00414102 Jy
! Component: 200  -  total flux cleaned = 0.00409018 Jy
! Total flux subtracted in 200 components = 0.00409018 Jy
! Clean residual min=-0.004218 max=0.004261 Jy/beam
! Clean residual mean=-0.000004 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.039978 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.039978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106483Jy  sigma=1.167481
! Fit after  self-cal, rms=0.106468Jy  sigma=1.166933
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.396 x 7.287 at -2.347 degrees (North through East)
! Clean map  min=-0.0040004  max=0.043148 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.06     KP        1.03     
!   LA        1.02     MK        1.10     NL        1.01     OV        1.05     
!   PT        0.99     SC        1.35     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.03     KP        0.95     
!   LA        1.01     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.40     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        1.29     HN        1.29     KP        0.29     
!   LA        1.12     MK        0.90     NL        1.00*    OV        1.33     
!   PT        1.23     SC        0.39     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.06     KP        1.00     
!   LA        1.05     MK        1.15     NL        1.04     OV        1.01     
!   PT        1.02     SC        1.45     
! 
! 
! Fit before self-cal, rms=0.106468Jy  sigma=1.166933
! Fit after  self-cal, rms=0.063362Jy  sigma=1.092665
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=7.33 mas, bpa=-0.2571 degrees
! Estimated noise=0.483183 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214571 Jy
! Component: 100  -  total flux cleaned = 9.73809e-05 Jy
! Component: 150  -  total flux cleaned = 2.59922e-05 Jy
! Component: 200  -  total flux cleaned = -1.57092e-05 Jy
! Total flux subtracted in 200 components = -1.57092e-05 Jy
! Clean residual min=-0.002157 max=0.002202 Jy/beam
! Clean residual mean=-0.000005 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.0399623 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.0399623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063336Jy  sigma=1.092046
! Fit after  self-cal, rms=0.064897Jy  sigma=1.067889
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064897Jy  sigma=1.067889
! Fit after  self-cal, rms=0.073142Jy  sigma=1.053590
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.262 mas, bmaj=7.307 mas, bpa=1.755 degrees
! Estimated noise=0.488229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000659679 Jy
! Component: 100  -  total flux cleaned = -0.000742957 Jy
! Component: 150  -  total flux cleaned = -0.000770292 Jy
! Component: 200  -  total flux cleaned = -0.000769939 Jy
! Total flux subtracted in 200 components = -0.000769939 Jy
! Clean residual min=-0.001881 max=0.001954 Jy/beam
! Clean residual mean=-0.000003 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.0391924 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.0391924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073126Jy  sigma=1.053526
! Fit after  self-cal, rms=0.073973Jy  sigma=1.049284
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0011622 Jy
! Component: 100  -  total flux cleaned = -0.00128242 Jy
! Component: 150  -  total flux cleaned = -0.00131619 Jy
! Component: 200  -  total flux cleaned = -0.00130408 Jy
! Total flux subtracted in 200 components = -0.00130408 Jy
! Clean residual min=-0.001860 max=0.001950 Jy/beam
! Clean residual mean=-0.000003 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.0378883 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.0378883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073926Jy  sigma=1.048960
! Fit after  self-cal, rms=0.073976Jy  sigma=1.048863
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073976Jy  sigma=1.048863
! Fit after  self-cal, rms=0.094544Jy  sigma=1.046639
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.334 mas, bpa=2.013 degrees
! Estimated noise=0.490241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012621 Jy
! Component: 100  -  total flux cleaned = -0.00011332 Jy
! Component: 150  -  total flux cleaned = -8.86827e-05 Jy
! Component: 200  -  total flux cleaned = -6.59942e-05 Jy
! Total flux subtracted in 200 components = -6.59942e-05 Jy
! Clean residual min=-0.001817 max=0.001904 Jy/beam
! Clean residual mean=-0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.0378223 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 55 components and 0.0378223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094536Jy  sigma=1.046615
! Fit after  self-cal, rms=0.095023Jy  sigma=1.045161
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000831187 Jy
! Component: 100  -  total flux cleaned = -0.00099405 Jy
! Component: 150  -  total flux cleaned = -0.00103029 Jy
! Component: 200  -  total flux cleaned = -0.00104056 Jy
! Total flux subtracted in 200 components = -0.00104056 Jy
! Clean residual min=-0.001903 max=0.001926 Jy/beam
! Clean residual mean=-0.000002 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0367817 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.0367817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094998Jy  sigma=1.045066
! Fit after  self-cal, rms=0.095028Jy  sigma=1.045031
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095028Jy  sigma=1.045031
! Fit after  self-cal, rms=0.127630Jy  sigma=1.044033
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.337 mas, bmaj=11.22 mas, bpa=1.834 degrees
! Estimated noise=0.648602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.80836e-05 Jy
! Component: 100  -  total flux cleaned = 8.8428e-05 Jy
! Component: 150  -  total flux cleaned = 8.89539e-05 Jy
! Component: 200  -  total flux cleaned = 9.75115e-05 Jy
! Total flux subtracted in 200 components = 9.75115e-05 Jy
! Clean residual min=-0.002377 max=0.002600 Jy/beam
! Clean residual mean=-0.000004 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.0368793 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 63 components and 0.0368793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127632Jy  sigma=1.044039
! Fit after  self-cal, rms=0.127917Jy  sigma=1.043601
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000571584 Jy
! Component: 100  -  total flux cleaned = -0.000648453 Jy
! Component: 150  -  total flux cleaned = -0.000667671 Jy
! Component: 200  -  total flux cleaned = -0.000659617 Jy
! Total flux subtracted in 200 components = -0.000659617 Jy
! Clean residual min=-0.002363 max=0.002626 Jy/beam
! Clean residual mean=-0.000004 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.0362196 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.0362196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127909Jy  sigma=1.043615
! Fit after  self-cal, rms=0.127921Jy  sigma=1.043542
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.252 mas, bmaj=7.357 mas, bpa=2.013 degrees
! Estimated noise=0.490659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.252 x 7.357 at 2.013 degrees (North through East)
! Clean map  min=-0.0018423  max=0.040869 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.768 mas, bmaj=6.705 mas, bpa=0.8258 degrees
! Estimated noise=0.742865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327932 Jy
! Component: 100  -  total flux cleaned = 0.0371059 Jy
! Component: 150  -  total flux cleaned = 0.0369078 Jy
! Component: 200  -  total flux cleaned = 0.0368883 Jy
! Total flux subtracted in 200 components = 0.0368883 Jy
! Clean residual min=-0.002759 max=0.003091 Jy/beam
! Clean residual mean=0.000002 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.0368883 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0368883 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.252 mas, bmaj=7.357 mas, bpa=2.013 degrees
! Estimated noise=0.490659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000468867 Jy
! Component: 100  -  total flux cleaned = -0.000519429 Jy
! Component: 150  -  total flux cleaned = -0.000671179 Jy
! Component: 200  -  total flux cleaned = -0.000802118 Jy
! Total flux subtracted in 200 components = -0.000802118 Jy
! Clean residual min=-0.001993 max=0.001885 Jy/beam
! Clean residual mean=-0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.0360862 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.0360862 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.337 mas, bmaj=11.22 mas, bpa=1.834 degrees
! Estimated noise=0.648602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017765 Jy
! Component: 100  -  total flux cleaned = 6.54427e-05 Jy
! Component: 150  -  total flux cleaned = -1.75726e-05 Jy
! Component: 200  -  total flux cleaned = -7.86047e-05 Jy
! Total flux subtracted in 200 components = -7.86047e-05 Jy
! Clean residual min=-0.002315 max=0.002631 Jy/beam
! Clean residual mean=-0.000004 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.0360076 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.86435e-05 Jy
! Component: 100  -  total flux cleaned = -4.51286e-05 Jy
! Component: 150  -  total flux cleaned = -5.27797e-05 Jy
! Component: 200  -  total flux cleaned = -5.26411e-05 Jy
! Total flux subtracted in 200 components = -5.26411e-05 Jy
! Clean residual min=-0.002324 max=0.002620 Jy/beam
! Clean residual mean=-0.000004 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.0359549 Jy
! Adding 6 model components to the UV plane model.
! The established model now contains 31 components and 0.0359549 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.252 mas, bmaj=7.357 mas, bpa=2.013 degrees
! Estimated noise=0.490659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000238879 Jy
! Component: 100  -  total flux cleaned = -0.000234096 Jy
! Component: 150  -  total flux cleaned = -0.000279081 Jy
! Component: 200  -  total flux cleaned = -0.0002983 Jy
! Total flux subtracted in 200 components = -0.0002983 Jy
! Clean residual min=-0.001964 max=0.001859 Jy/beam
! Clean residual mean=-0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.0356566 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.0356566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127923Jy  sigma=1.043803
! Fit after  self-cal, rms=0.127936Jy  sigma=1.043715
wmodel J2350+0227_S_map.mod
! Writing 39 model components to file: J2350+0227_S_map.mod
wobs   J2350+0227_S_uvs.fits
! Writing UV FITS file: J2350+0227_S_uvs.fits
wwins  J2350+0227_S_map.win
! wwins: Wrote 1 windows to J2350+0227_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.97183e-05 Jy
! Component: 100  -  total flux cleaned = -4.02436e-06 Jy
! Component: 150  -  total flux cleaned = -3.51505e-06 Jy
! Component: 200  -  total flux cleaned = 8.86722e-05 Jy
! Component: 250  -  total flux cleaned = 0.000236064 Jy
! Component: 300  -  total flux cleaned = 0.00032214 Jy
! Component: 350  -  total flux cleaned = 0.000518512 Jy
! Component: 400  -  total flux cleaned = 0.000709185 Jy
! Component: 450  -  total flux cleaned = 0.00073586 Jy
! Component: 500  -  total flux cleaned = 0.000840286 Jy
! Component: 550  -  total flux cleaned = 0.000839971 Jy
! Component: 600  -  total flux cleaned = 0.000890106 Jy
! Component: 650  -  total flux cleaned = 0.000865498 Jy
! Component: 700  -  total flux cleaned = 0.00088985 Jy
! Component: 750  -  total flux cleaned = 0.000889822 Jy
! Component: 800  -  total flux cleaned = 0.00088996 Jy
! Component: 850  -  total flux cleaned = 0.000867075 Jy
! Component: 900  -  total flux cleaned = 0.000844667 Jy
! Component: 950  -  total flux cleaned = 0.000800355 Jy
! Component: 1000  -  total flux cleaned = 0.000800678 Jy
! Component: 1050  -  total flux cleaned = 0.000692953 Jy
! Component: 1100  -  total flux cleaned = 0.000629422 Jy
! Component: 1150  -  total flux cleaned = 0.000525057 Jy
! Component: 1200  -  total flux cleaned = 0.000504569 Jy
! Component: 1250  -  total flux cleaned = 0.000525216 Jy
! Component: 1300  -  total flux cleaned = 0.000505224 Jy
! Component: 1350  -  total flux cleaned = 0.000525054 Jy
! Component: 1400  -  total flux cleaned = 0.000524979 Jy
! Component: 1450  -  total flux cleaned = 0.000524705 Jy
! Component: 1500  -  total flux cleaned = 0.000505304 Jy
! Component: 1550  -  total flux cleaned = 0.000485788 Jy
! Component: 1600  -  total flux cleaned = 0.000429555 Jy
! Component: 1650  -  total flux cleaned = 0.000392472 Jy
! Component: 1700  -  total flux cleaned = 0.000374336 Jy
! Component: 1750  -  total flux cleaned = 0.00030154 Jy
! Component: 1800  -  total flux cleaned = 0.000319382 Jy
! Component: 1850  -  total flux cleaned = 0.000247832 Jy
! Component: 1900  -  total flux cleaned = 0.000194753 Jy
! Component: 1950  -  total flux cleaned = 0.000212032 Jy
! Component: 2000  -  total flux cleaned = 0.000177243 Jy
! Component: 2050  -  total flux cleaned = 0.000159985 Jy
! Component: 2100  -  total flux cleaned = 0.000108873 Jy
! Component: 2150  -  total flux cleaned = 5.84422e-05 Jy
! Component: 2200  -  total flux cleaned = 8.30612e-06 Jy
! Component: 2250  -  total flux cleaned = -8.3379e-06 Jy
! Component: 2300  -  total flux cleaned = -7.39988e-05 Jy
! Component: 2350  -  total flux cleaned = -0.000171665 Jy
! Component: 2400  -  total flux cleaned = -0.00018782 Jy
! Component: 2450  -  total flux cleaned = -0.000171811 Jy
! Component: 2500  -  total flux cleaned = -0.000266958 Jy
! Component: 2550  -  total flux cleaned = -0.000203668 Jy
! Component: 2600  -  total flux cleaned = -0.000219546 Jy
! Component: 2650  -  total flux cleaned = -0.00020402 Jy
! Component: 2700  -  total flux cleaned = -0.00025014 Jy
! Component: 2750  -  total flux cleaned = -0.000219529 Jy
! Component: 2800  -  total flux cleaned = -0.000189005 Jy
! Component: 2850  -  total flux cleaned = -0.000219309 Jy
! Component: 2900  -  total flux cleaned = -0.000114326 Jy
! Component: 2950  -  total flux cleaned = -0.000174065 Jy
! Component: 3000  -  total flux cleaned = -7.0419e-05 Jy
! Component: 3050  -  total flux cleaned = -0.000114718 Jy
! Component: 3100  -  total flux cleaned = -0.000100019 Jy
! Component: 3150  -  total flux cleaned = -0.000129161 Jy
! Component: 3200  -  total flux cleaned = -5.67545e-05 Jy
! Component: 3250  -  total flux cleaned = -7.12226e-05 Jy
! Component: 3300  -  total flux cleaned = -8.54256e-05 Jy
! Component: 3350  -  total flux cleaned = -8.54374e-05 Jy
! Component: 3400  -  total flux cleaned = -8.52694e-05 Jy
! Component: 3450  -  total flux cleaned = 1.3534e-05 Jy
! Component: 3500  -  total flux cleaned = -6.77855e-07 Jy
! Component: 3550  -  total flux cleaned = -6.61068e-07 Jy
! Component: 3600  -  total flux cleaned = 4.1113e-05 Jy
! Component: 3650  -  total flux cleaned = 8.26684e-05 Jy
! Component: 3700  -  total flux cleaned = 6.89688e-05 Jy
! Component: 3750  -  total flux cleaned = 6.89556e-05 Jy
! Component: 3800  -  total flux cleaned = 9.61441e-05 Jy
! Component: 3850  -  total flux cleaned = 0.000123373 Jy
! Component: 3900  -  total flux cleaned = 0.000177348 Jy
! Component: 3950  -  total flux cleaned = 0.00017735 Jy
! Component: 4000  -  total flux cleaned = 0.000190675 Jy
! Component: 4050  -  total flux cleaned = 0.000217323 Jy
! Total flux subtracted in 4096 components = 0.000204177 Jy
! Clean residual min=-0.000862 max=0.000795 Jy/beam
! Clean residual mean=0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0358608 Jy
keep
! Adding 324 model components to the UV plane model.
! The established model now contains 363 components and 0.0358608 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J2350+0227_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.252 x 7.357 at 2.013 degrees (North through East)
! Clean map  min=-0.0015108  max=0.040582 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J2350+0227_S_map.fits
wmodel /scr/pima/rv119_uvs/J2350+0227_S_map.mod
! Writing 363 model components to file: /scr/pima/rv119_uvs/J2350+0227_S_map.mod
wobs   /scr/pima/rv119_uvs/J2350+0227_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J2350+0227_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J2350+0227_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv119_uvs/J2350+0227_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0405824 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248982 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.84056 1.84056 3.68113 7.36226 14.7245 29.449 58.8981
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.04 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  162.993 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J2350+0227_S_dfm.log closed on Sun Dec 17 11:39:44 2017