! Started logfile: /scr/pima/rv119_uvs/J2348+0624_S_dfm.log on Sun Dec 17 11:39:35 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv119_uvs/J2348+0624_S_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J2348+0624_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.911616 visibilities/baseline/integration-bin. ! Found source: J2348+0624 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7220 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2348+0624_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.023007Jy sigma=18.618475 ! Fit after self-cal, rms=0.886974Jy sigma=16.360696 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=6.099 mas, bpa=-3.383 degrees ! Estimated noise=0.898883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0881032 Jy ! Component: 100 - total flux cleaned = 0.10935 Jy ! Total flux subtracted in 100 components = 0.10935 Jy ! Clean residual min=-0.007097 max=0.008336 Jy/beam ! Clean residual mean=-0.000017 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 0.10935 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.10935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137565Jy sigma=1.449907 ! Fit after self-cal, rms=0.137386Jy sigma=1.448833 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=6.963 mas, bpa=-1.453 degrees ! Estimated noise=0.49376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010129 Jy ! Component: 100 - total flux cleaned = 0.0147698 Jy ! Component: 150 - total flux cleaned = 0.0171151 Jy ! Component: 200 - total flux cleaned = 0.0182466 Jy ! Total flux subtracted in 200 components = 0.0182466 Jy ! Clean residual min=-0.006629 max=0.008508 Jy/beam ! Clean residual mean=-0.000047 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.127597 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.127597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136058Jy sigma=1.434359 ! Fit after self-cal, rms=0.135934Jy sigma=1.433548 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 6.963 at -1.453 degrees (North through East) ! Clean map min=-0.0063702 max=0.11484 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.01 KP 0.98 ! LA 0.95 MK 0.95 NL 1.09 OV 1.05 ! PT 1.00 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.01 KP 1.00 ! LA 0.99 MK 0.96 NL 1.06 OV 1.01 ! PT 1.05 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.04 KP 0.30 ! LA 1.06 MK 1.46 NL 1.00* OV 1.14 ! PT 1.13 SC 0.72 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.97 KP 1.09 ! LA 1.02 MK 0.93 NL 1.00 OV 0.93 ! PT 1.06 SC 1.07 ! ! ! Fit before self-cal, rms=0.135934Jy sigma=1.433548 ! Fit after self-cal, rms=0.072811Jy sigma=1.347459 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=7.009 mas, bpa=-0.5692 degrees ! Estimated noise=0.492395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295258 Jy ! Component: 100 - total flux cleaned = -0.000511287 Jy ! Component: 150 - total flux cleaned = -0.000716857 Jy ! Component: 200 - total flux cleaned = -0.000780148 Jy ! Total flux subtracted in 200 components = -0.000780148 Jy ! Clean residual min=-0.005748 max=0.007431 Jy/beam ! Clean residual mean=-0.000046 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.126816 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.126816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072770Jy sigma=1.346337 ! Fit after self-cal, rms=0.073191Jy sigma=1.330681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073191Jy sigma=1.330681 ! Fit after self-cal, rms=0.074618Jy sigma=1.306677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=6.989 mas, bpa=0.1113 degrees ! Estimated noise=0.494912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664644 Jy ! Component: 100 - total flux cleaned = 0.000928921 Jy ! Component: 150 - total flux cleaned = 0.00106855 Jy ! Component: 200 - total flux cleaned = 0.00114052 Jy ! Total flux subtracted in 200 components = 0.00114052 Jy ! Clean residual min=-0.004900 max=0.006993 Jy/beam ! Clean residual mean=-0.000037 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.127957 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.127957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074570Jy sigma=1.306232 ! Fit after self-cal, rms=0.074959Jy sigma=1.305094 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (114, -113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694439 Jy ! Component: 100 - total flux cleaned = 0.0113744 Jy ! Component: 150 - total flux cleaned = 0.0145095 Jy ! Component: 200 - total flux cleaned = 0.016764 Jy ! Total flux subtracted in 200 components = 0.016764 Jy ! Clean residual min=-0.004323 max=0.005633 Jy/beam ! Clean residual mean=-0.000065 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.144721 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 95 components and 0.144721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074214Jy sigma=1.288921 ! Fit after self-cal, rms=0.074109Jy sigma=1.287477 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074109Jy sigma=1.287477 ! Fit after self-cal, rms=0.074524Jy sigma=1.285524 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=6.99 mas, bpa=0.1069 degrees ! Estimated noise=0.494992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311589 Jy ! Component: 100 - total flux cleaned = 0.005205 Jy ! Component: 150 - total flux cleaned = 0.00672356 Jy ! Component: 200 - total flux cleaned = 0.00790329 Jy ! Total flux subtracted in 200 components = 0.00790329 Jy ! Clean residual min=-0.004378 max=0.005658 Jy/beam ! Clean residual mean=-0.000052 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.152624 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 111 components and 0.152624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074375Jy sigma=1.281687 ! Fit after self-cal, rms=0.074414Jy sigma=1.281364 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126087 Jy ! Component: 100 - total flux cleaned = 0.00193622 Jy ! Component: 150 - total flux cleaned = 0.00234752 Jy ! Component: 200 - total flux cleaned = 0.00262444 Jy ! Total flux subtracted in 200 components = 0.00262444 Jy ! Clean residual min=-0.004363 max=0.005634 Jy/beam ! Clean residual mean=-0.000049 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.155249 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 122 components and 0.155249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074380Jy sigma=1.280522 ! Fit after self-cal, rms=0.074376Jy sigma=1.280490 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074376Jy sigma=1.280490 ! Fit after self-cal, rms=0.074833Jy sigma=1.279875 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.438 mas, bmaj=10.78 mas, bpa=0.7857 degrees ! Estimated noise=0.64352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252033 Jy ! Component: 100 - total flux cleaned = 0.00298286 Jy ! Component: 150 - total flux cleaned = 0.00355456 Jy ! Component: 200 - total flux cleaned = 0.00392608 Jy ! Total flux subtracted in 200 components = 0.00392608 Jy ! Clean residual min=-0.007231 max=0.008906 Jy/beam ! Clean residual mean=-0.000098 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 0.159175 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.159175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074838Jy sigma=1.279733 ! Fit after self-cal, rms=0.074844Jy sigma=1.279515 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606573 Jy ! Component: 100 - total flux cleaned = 0.000705865 Jy ! Component: 150 - total flux cleaned = 0.000795059 Jy ! Component: 200 - total flux cleaned = 0.000875858 Jy ! Total flux subtracted in 200 components = 0.000875858 Jy ! Clean residual min=-0.007219 max=0.008733 Jy/beam ! Clean residual mean=-0.000094 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.160051 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.160051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074864Jy sigma=1.279848 ! Fit after self-cal, rms=0.074866Jy sigma=1.279821 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=6.989 mas, bpa=0.06132 degrees ! Estimated noise=0.496212 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.418 x 6.989 at 0.06132 degrees (North through East) ! Clean map min=-0.0042551 max=0.11583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=6.137 mas, bpa=-2.476 degrees ! Estimated noise=0.907979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0889822 Jy ! Component: 100 - total flux cleaned = 0.110222 Jy ! Component: 150 - total flux cleaned = 0.119391 Jy ! Component: 200 - total flux cleaned = 0.125892 Jy ! Total flux subtracted in 200 components = 0.125892 Jy ! Clean residual min=-0.005131 max=0.005434 Jy/beam ! Clean residual mean=-0.000009 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.125892 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.125892 Jy ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=6.989 mas, bpa=0.06132 degrees ! Estimated noise=0.496212 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794869 Jy ! Component: 100 - total flux cleaned = 0.0133447 Jy ! Component: 150 - total flux cleaned = 0.0175505 Jy ! Component: 200 - total flux cleaned = 0.0209255 Jy ! Total flux subtracted in 200 components = 0.0209255 Jy ! Clean residual min=-0.004706 max=0.005821 Jy/beam ! Clean residual mean=-0.000056 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.146818 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 65 components and 0.146818 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.438 mas, bmaj=10.78 mas, bpa=0.7857 degrees ! Estimated noise=0.64352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00531562 Jy ! Component: 100 - total flux cleaned = 0.00850537 Jy ! Component: 150 - total flux cleaned = 0.0104299 Jy ! Component: 200 - total flux cleaned = 0.0113361 Jy ! Total flux subtracted in 200 components = 0.0113361 Jy ! Clean residual min=-0.007352 max=0.008798 Jy/beam ! Clean residual mean=-0.000111 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.158154 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732952 Jy ! Component: 100 - total flux cleaned = 0.00115218 Jy ! Component: 150 - total flux cleaned = 0.00142663 Jy ! Component: 200 - total flux cleaned = 0.00166131 Jy ! Total flux subtracted in 200 components = 0.00166131 Jy ! Clean residual min=-0.007217 max=0.008816 Jy/beam ! Clean residual mean=-0.000112 rms=0.002409 Jy/beam ! Combined flux in latest and established models = 0.159815 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 108 components and 0.159815 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=6.989 mas, bpa=0.06132 degrees ! Estimated noise=0.496212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512515 Jy ! Component: 100 - total flux cleaned = -0.000447855 Jy ! Component: 150 - total flux cleaned = -0.000501183 Jy ! Component: 200 - total flux cleaned = -0.000409614 Jy ! Total flux subtracted in 200 components = -0.000409614 Jy ! Clean residual min=-0.004575 max=0.005716 Jy/beam ! Clean residual mean=-0.000043 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.159405 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.159405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074862Jy sigma=1.279569 ! Fit after self-cal, rms=0.074838Jy sigma=1.279327 wmodel J2348+0624_S_map.mod ! Writing 127 model components to file: J2348+0624_S_map.mod wobs J2348+0624_S_uvs.fits ! Writing UV FITS file: J2348+0624_S_uvs.fits wwins J2348+0624_S_map.win ! wwins: Wrote 2 windows to J2348+0624_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240254 Jy ! Component: 100 - total flux cleaned = 0.00393375 Jy ! Component: 150 - total flux cleaned = 0.0052128 Jy ! Component: 200 - total flux cleaned = 0.00642794 Jy ! Component: 250 - total flux cleaned = 0.00758531 Jy ! Component: 300 - total flux cleaned = 0.00855431 Jy ! Component: 350 - total flux cleaned = 0.00941915 Jy ! Component: 400 - total flux cleaned = 0.0101884 Jy ! Component: 450 - total flux cleaned = 0.0108094 Jy ! Component: 500 - total flux cleaned = 0.0114723 Jy ! Component: 550 - total flux cleaned = 0.0118248 Jy ! Component: 600 - total flux cleaned = 0.0121681 Jy ! Component: 650 - total flux cleaned = 0.0125571 Jy ! Component: 700 - total flux cleaned = 0.0128275 Jy ! Component: 750 - total flux cleaned = 0.0129869 Jy ! Component: 800 - total flux cleaned = 0.0134012 Jy ! Component: 850 - total flux cleaned = 0.0137041 Jy ! Component: 900 - total flux cleaned = 0.0140502 Jy ! Component: 950 - total flux cleaned = 0.0140988 Jy ! Component: 1000 - total flux cleaned = 0.0144297 Jy ! Component: 1050 - total flux cleaned = 0.0145209 Jy ! Component: 1100 - total flux cleaned = 0.0147034 Jy ! Component: 1150 - total flux cleaned = 0.014882 Jy ! Component: 1200 - total flux cleaned = 0.0150579 Jy ! Component: 1250 - total flux cleaned = 0.015101 Jy ! Component: 1300 - total flux cleaned = 0.0151861 Jy ! Component: 1350 - total flux cleaned = 0.0153115 Jy ! Component: 1400 - total flux cleaned = 0.0153939 Jy ! Component: 1450 - total flux cleaned = 0.0155145 Jy ! Component: 1500 - total flux cleaned = 0.0157134 Jy ! Component: 1550 - total flux cleaned = 0.0159078 Jy ! Component: 1600 - total flux cleaned = 0.015908 Jy ! Component: 1650 - total flux cleaned = 0.0162481 Jy ! Component: 1700 - total flux cleaned = 0.0164345 Jy ! Component: 1750 - total flux cleaned = 0.016509 Jy ! Component: 1800 - total flux cleaned = 0.016835 Jy ! Component: 1850 - total flux cleaned = 0.016942 Jy ! Component: 1900 - total flux cleaned = 0.0171181 Jy ! Component: 1950 - total flux cleaned = 0.0172569 Jy ! Component: 2000 - total flux cleaned = 0.0173258 Jy ! Component: 2050 - total flux cleaned = 0.0175301 Jy ! Component: 2100 - total flux cleaned = 0.0177313 Jy ! Component: 2150 - total flux cleaned = 0.0178639 Jy ! Component: 2200 - total flux cleaned = 0.0179951 Jy ! Component: 2250 - total flux cleaned = 0.018157 Jy ! Component: 2300 - total flux cleaned = 0.0182219 Jy ! Component: 2350 - total flux cleaned = 0.0183173 Jy ! Component: 2400 - total flux cleaned = 0.018505 Jy ! Component: 2450 - total flux cleaned = 0.0185363 Jy ! Component: 2500 - total flux cleaned = 0.0186287 Jy ! Component: 2550 - total flux cleaned = 0.0187504 Jy ! Component: 2600 - total flux cleaned = 0.0189304 Jy ! Component: 2650 - total flux cleaned = 0.0190493 Jy ! Component: 2700 - total flux cleaned = 0.0191379 Jy ! Component: 2750 - total flux cleaned = 0.0191962 Jy ! Component: 2800 - total flux cleaned = 0.0193119 Jy ! Component: 2850 - total flux cleaned = 0.019312 Jy ! Component: 2900 - total flux cleaned = 0.0194255 Jy ! Component: 2950 - total flux cleaned = 0.0195099 Jy ! Component: 3000 - total flux cleaned = 0.0194538 Jy ! Component: 3050 - total flux cleaned = 0.0197023 Jy ! Component: 3100 - total flux cleaned = 0.0195925 Jy ! Component: 3150 - total flux cleaned = 0.0196464 Jy ! Component: 3200 - total flux cleaned = 0.0196463 Jy ! Component: 3250 - total flux cleaned = 0.0195926 Jy ! Component: 3300 - total flux cleaned = 0.0196452 Jy ! Component: 3350 - total flux cleaned = 0.0196186 Jy ! Component: 3400 - total flux cleaned = 0.0196708 Jy ! Component: 3450 - total flux cleaned = 0.0197224 Jy ! Component: 3500 - total flux cleaned = 0.0197738 Jy ! Component: 3550 - total flux cleaned = 0.0196466 Jy ! Component: 3600 - total flux cleaned = 0.0196969 Jy ! Component: 3650 - total flux cleaned = 0.0196719 Jy ! Component: 3700 - total flux cleaned = 0.0197959 Jy ! Component: 3750 - total flux cleaned = 0.0198207 Jy ! Component: 3800 - total flux cleaned = 0.019821 Jy ! Component: 3850 - total flux cleaned = 0.0198208 Jy ! Component: 3900 - total flux cleaned = 0.0199174 Jy ! Component: 3950 - total flux cleaned = 0.0198936 Jy ! Component: 4000 - total flux cleaned = 0.0200127 Jy ! Component: 4050 - total flux cleaned = 0.0201542 Jy ! Total flux subtracted in 4096 components = 0.0202244 Jy ! Clean residual min=-0.001593 max=0.001356 Jy/beam ! Clean residual mean=-0.000001 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.17963 Jy keep ! Adding 398 model components to the UV plane model. ! The established model now contains 525 components and 0.17963 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J2348+0624_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.418 x 6.989 at 0.06132 degrees (North through East) ! Clean map min=-0.0026339 max=0.11665 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J2348+0624_S_map.fits wmodel /scr/pima/rv119_uvs/J2348+0624_S_map.mod ! Writing 525 model components to file: /scr/pima/rv119_uvs/J2348+0624_S_map.mod wobs /scr/pima/rv119_uvs/J2348+0624_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J2348+0624_S_uvs.fits wwins /scr/pima/rv119_uvs/J2348+0624_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv119_uvs/J2348+0624_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.116651 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0004535 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1663 1.1663 2.3326 4.66521 9.33041 18.6608 37.3217 74.6433 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.116 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 257.223 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J2348+0624_S_dfm.log closed on Sun Dec 17 11:39:39 2017