! Started logfile: /scr/pima/rv119_uvs/J1802-3940_S_dfm.log on Sun Dec 17 11:38:25 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J1802-3940_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J1802-3940_S_uva.fits
! AN table 1: 4 integrations on 21 of 21 possible baselines.
! AN table 2: 8 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.634146 visibilities/baseline/integration-bin.
! Found source: J1802-3940
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1802-3940_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.687678Jy  sigma=18.329608
! Fit after  self-cal, rms=0.695922Jy  sigma=7.171882
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=15.65 mas, bpa=0.9796 degrees
! Estimated noise=4.16124 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.789336 Jy
! Component: 100  -  total flux cleaned = 1.03853 Jy
! Total flux subtracted in 100 components = 1.03853 Jy
! Clean residual min=-0.175173 max=0.197542 Jy/beam
! Clean residual mean=0.000166 rms=0.055968 Jy/beam
! Combined flux in latest and established models = 1.03853 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.03853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.677952Jy  sigma=6.948117
! Fit after  self-cal, rms=0.677928Jy  sigma=6.947981
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.622 mas, bmaj=19.47 mas, bpa=0.3456 degrees
! Estimated noise=3.29226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15346 Jy
! Component: 100  -  total flux cleaned = 0.230469 Jy
! Component: 150  -  total flux cleaned = 0.273898 Jy
! Component: 200  -  total flux cleaned = 0.298505 Jy
! Total flux subtracted in 200 components = 0.298505 Jy
! Clean residual min=-0.094944 max=0.118229 Jy/beam
! Clean residual mean=0.000801 rms=0.030120 Jy/beam
! Combined flux in latest and established models = 1.33703 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 61 components and 1.33703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.635358Jy  sigma=6.608718
! Fit after  self-cal, rms=0.635315Jy  sigma=6.608443
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.622 x 19.47 at 0.3456 degrees (North through East)
! Clean map  min=-0.09157  max=1.0274 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.05     LA        1.05     NL        1.17     
!   OV        1.09     PT        1.04     SC        1.63     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.04     LA        1.07     MK        1.14     OV        1.06     
!   PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.06     LA        1.04     NL        1.16     
!   OV        1.06     PT        1.05     SC        1.53     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.04     LA        1.08     MK        1.10     OV        1.05     
!   PT        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        0.44     LA        0.97     NL        1.00*    
!   OV        1.09     PT        1.02     SC        0.58     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.44     LA        0.95     MK        0.84     OV        1.04     
!   PT        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     KP        1.08     LA        1.03     NL        1.11     
!   OV        1.05     PT        1.08     SC        1.51     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.06     LA        1.07     MK        1.13     OV        1.00     
!   PT        1.07     
! 
! 
! Fit before self-cal, rms=0.635315Jy  sigma=6.608443
! Fit after  self-cal, rms=0.139107Jy  sigma=1.235557
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.427 mas, bmaj=19.26 mas, bpa=1.007 degrees
! Estimated noise=3.71557 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00963085 Jy
! Component: 100  -  total flux cleaned = -0.00966647 Jy
! Component: 150  -  total flux cleaned = -0.00967716 Jy
! Component: 200  -  total flux cleaned = -0.0103821 Jy
! Total flux subtracted in 200 components = -0.0103821 Jy
! Clean residual min=-0.031106 max=0.020246 Jy/beam
! Clean residual mean=0.000031 rms=0.005640 Jy/beam
! Combined flux in latest and established models = 1.32665 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 69 components and 1.32665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126152Jy  sigma=1.119015
! Fit after  self-cal, rms=0.126597Jy  sigma=1.112322
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126597Jy  sigma=1.112322
! Fit after  self-cal, rms=0.125519Jy  sigma=1.093506
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=19.3 mas, bpa=1.026 degrees
! Estimated noise=3.69803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00626505 Jy
! Component: 100  -  total flux cleaned = -0.00627214 Jy
! Component: 150  -  total flux cleaned = -0.00681539 Jy
! Component: 200  -  total flux cleaned = -0.00682363 Jy
! Total flux subtracted in 200 components = -0.00682363 Jy
! Clean residual min=-0.027912 max=0.020045 Jy/beam
! Clean residual mean=0.000018 rms=0.005021 Jy/beam
! Combined flux in latest and established models = 1.31982 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 74 components and 1.31982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117613Jy  sigma=1.040227
! Fit after  self-cal, rms=0.117596Jy  sigma=1.039533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.45849e-05 Jy
! Component: 100  -  total flux cleaned = -4.87811e-05 Jy
! Component: 150  -  total flux cleaned = -3.02552e-05 Jy
! Component: 200  -  total flux cleaned = -5.41982e-05 Jy
! Total flux subtracted in 200 components = -5.41982e-05 Jy
! Clean residual min=-0.025112 max=0.020752 Jy/beam
! Clean residual mean=0.000018 rms=0.004889 Jy/beam
! Combined flux in latest and established models = 1.31977 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 78 components and 1.31977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113148Jy  sigma=1.021824
! Fit after  self-cal, rms=0.113155Jy  sigma=1.021134
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113155Jy  sigma=1.021134
! Fit after  self-cal, rms=0.111842Jy  sigma=0.981535
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.423 mas, bmaj=19.34 mas, bpa=1.053 degrees
! Estimated noise=3.6876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00401119 Jy
! Component: 100  -  total flux cleaned = -0.00402623 Jy
! Component: 150  -  total flux cleaned = -0.00440153 Jy
! Component: 200  -  total flux cleaned = -0.0043944 Jy
! Total flux subtracted in 200 components = -0.0043944 Jy
! Clean residual min=-0.021556 max=0.019009 Jy/beam
! Clean residual mean=0.000002 rms=0.004416 Jy/beam
! Combined flux in latest and established models = 1.31538 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 87 components and 1.31538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107588Jy  sigma=0.970911
! Fit after  self-cal, rms=0.107617Jy  sigma=0.969988
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222281 Jy
! Component: 100  -  total flux cleaned = -0.000202015 Jy
! Component: 150  -  total flux cleaned = -0.000213171 Jy
! Component: 200  -  total flux cleaned = -0.000447925 Jy
! Total flux subtracted in 200 components = -0.000447925 Jy
! Clean residual min=-0.019892 max=0.019582 Jy/beam
! Clean residual mean=0.000002 rms=0.004395 Jy/beam
! Combined flux in latest and established models = 1.31493 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 91 components and 1.31493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105123Jy  sigma=0.968796
! Fit after  self-cal, rms=0.105159Jy  sigma=0.967889
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105159Jy  sigma=0.967889
! Fit after  self-cal, rms=0.105317Jy  sigma=0.950656
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.245 mas, bmaj=35.04 mas, bpa=-4.365 degrees
! Estimated noise=4.63799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000570075 Jy
! Component: 100  -  total flux cleaned = -0.000427132 Jy
! Component: 150  -  total flux cleaned = -0.000440109 Jy
! Component: 200  -  total flux cleaned = -0.00044929 Jy
! Total flux subtracted in 200 components = -0.00044929 Jy
! Clean residual min=-0.014337 max=0.015513 Jy/beam
! Clean residual mean=0.000034 rms=0.004222 Jy/beam
! Combined flux in latest and established models = 1.31448 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 95 components and 1.31448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104290Jy  sigma=0.948373
! Fit after  self-cal, rms=0.104115Jy  sigma=0.946271
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290473 Jy
! Component: 100  -  total flux cleaned = 0.000423142 Jy
! Component: 150  -  total flux cleaned = 0.000302601 Jy
! Component: 200  -  total flux cleaned = 0.000310275 Jy
! Total flux subtracted in 200 components = 0.000310275 Jy
! Clean residual min=-0.014340 max=0.015367 Jy/beam
! Clean residual mean=0.000035 rms=0.004201 Jy/beam
! Combined flux in latest and established models = 1.31479 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 96 components and 1.31479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103257Jy  sigma=0.946245
! Fit after  self-cal, rms=0.103137Jy  sigma=0.945118
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.419 mas, bmaj=19.4 mas, bpa=1.061 degrees
! Estimated noise=3.68162 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.419 x 19.4 at 1.061 degrees (North through East)
! Clean map  min=-0.018372  max=1.0014 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103137Jy  sigma=0.945118
! Fit after  self-cal, rms=0.099823Jy  sigma=0.863999
! Inverting map and beam 
! Estimated beam: bmin=3.42 mas, bmaj=19.42 mas, bpa=1.037 degrees
! Estimated noise=3.68021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00296676 Jy
! Component: 100  -  total flux cleaned = -0.00297746 Jy
! Component: 150  -  total flux cleaned = -0.00298455 Jy
! Component: 200  -  total flux cleaned = -0.00299631 Jy
! Total flux subtracted in 200 components = -0.00299631 Jy
! Clean residual min=-0.017440 max=0.017247 Jy/beam
! Clean residual mean=0.000021 rms=0.004085 Jy/beam
! Combined flux in latest and established models = 1.31179 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 101 components and 1.31179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097322Jy  sigma=0.859947
! Fit after  self-cal, rms=0.097355Jy  sigma=0.858879
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000420752 Jy
! Component: 100  -  total flux cleaned = -0.000415394 Jy
! Component: 150  -  total flux cleaned = -0.000419306 Jy
! Component: 200  -  total flux cleaned = -0.000603884 Jy
! Total flux subtracted in 200 components = -0.000603884 Jy
! Clean residual min=-0.016257 max=0.017325 Jy/beam
! Clean residual mean=0.000020 rms=0.004086 Jy/beam
! Combined flux in latest and established models = 1.31119 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 106 components and 1.31119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095807Jy  sigma=0.859929
! Fit after  self-cal, rms=0.095854Jy  sigma=0.858658
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095854Jy  sigma=0.858658
! Fit after  self-cal, rms=0.096337Jy  sigma=0.849094
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=16.75 mas, bpa=2.224 degrees
! Estimated noise=4.49757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.798595 Jy
! Component: 100  -  total flux cleaned = 1.01251 Jy
! Component: 150  -  total flux cleaned = 1.10896 Jy
! Component: 200  -  total flux cleaned = 1.16583 Jy
! Total flux subtracted in 200 components = 1.16583 Jy
! Clean residual min=-0.026871 max=0.039572 Jy/beam
! Clean residual mean=-0.000025 rms=0.007887 Jy/beam
! Combined flux in latest and established models = 1.16583 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 1.16583 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=19.46 mas, bpa=1.056 degrees
! Estimated noise=3.67731 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0667542 Jy
! Component: 100  -  total flux cleaned = 0.101714 Jy
! Component: 150  -  total flux cleaned = 0.121663 Jy
! Component: 200  -  total flux cleaned = 0.133902 Jy
! Total flux subtracted in 200 components = 0.133902 Jy
! Clean residual min=-0.014797 max=0.014094 Jy/beam
! Clean residual mean=0.000020 rms=0.003956 Jy/beam
! Combined flux in latest and established models = 1.29973 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 99 components and 1.29973 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.249 mas, bmaj=35.14 mas, bpa=-4.333 degrees
! Estimated noise=4.6363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103948 Jy
! Component: 100  -  total flux cleaned = 0.0118041 Jy
! Component: 150  -  total flux cleaned = 0.0130955 Jy
! Component: 200  -  total flux cleaned = 0.0139387 Jy
! Total flux subtracted in 200 components = 0.0139387 Jy
! Clean residual min=-0.013684 max=0.015443 Jy/beam
! Clean residual mean=0.000064 rms=0.004176 Jy/beam
! Combined flux in latest and established models = 1.31367 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000687203 Jy
! Component: 100  -  total flux cleaned = 0.00115496 Jy
! Component: 150  -  total flux cleaned = 0.00146252 Jy
! Component: 200  -  total flux cleaned = 0.00174398 Jy
! Total flux subtracted in 200 components = 0.00174398 Jy
! Clean residual min=-0.013878 max=0.015905 Jy/beam
! Clean residual mean=0.000067 rms=0.004150 Jy/beam
! Combined flux in latest and established models = 1.31541 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 139 components and 1.31541 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=19.46 mas, bpa=1.056 degrees
! Estimated noise=3.67731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114881 Jy
! Component: 100  -  total flux cleaned = -0.000231003 Jy
! Component: 150  -  total flux cleaned = -0.000381176 Jy
! Component: 200  -  total flux cleaned = -0.000636677 Jy
! Total flux subtracted in 200 components = -0.000636677 Jy
! Clean residual min=-0.013746 max=0.015007 Jy/beam
! Clean residual mean=0.000038 rms=0.003667 Jy/beam
! Combined flux in latest and established models = 1.31477 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 160 components and 1.31477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083339Jy  sigma=0.820960
! Fit after  self-cal, rms=0.082557Jy  sigma=0.812004
wmodel J1802-3940_S_map.mod
! Writing 160 model components to file: J1802-3940_S_map.mod
wobs   J1802-3940_S_uvs.fits
! Writing UV FITS file: J1802-3940_S_uvs.fits
wwins  J1802-3940_S_map.win
! wwins: Wrote 2 windows to J1802-3940_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284807 Jy
! Component: 100  -  total flux cleaned = 0.00240725 Jy
! Component: 150  -  total flux cleaned = 0.00355118 Jy
! Component: 200  -  total flux cleaned = 0.00462931 Jy
! Component: 250  -  total flux cleaned = 0.0046322 Jy
! Component: 300  -  total flux cleaned = 0.00399871 Jy
! Component: 350  -  total flux cleaned = 0.00369419 Jy
! Component: 400  -  total flux cleaned = 0.00251399 Jy
! Component: 450  -  total flux cleaned = 0.00137857 Jy
! Component: 500  -  total flux cleaned = 0.000418329 Jy
! Component: 550  -  total flux cleaned = -0.000507684 Jy
! Component: 600  -  total flux cleaned = -0.00140533 Jy
! Component: 650  -  total flux cleaned = -0.00264764 Jy
! Component: 700  -  total flux cleaned = -0.00336999 Jy
! Component: 750  -  total flux cleaned = -0.0040739 Jy
! Component: 800  -  total flux cleaned = -0.00452976 Jy
! Component: 850  -  total flux cleaned = -0.00464357 Jy
! Component: 900  -  total flux cleaned = -0.00507909 Jy
! Component: 950  -  total flux cleaned = -0.0056083 Jy
! Component: 1000  -  total flux cleaned = -0.00591816 Jy
! Component: 1050  -  total flux cleaned = -0.00601926 Jy
! Component: 1100  -  total flux cleaned = -0.00602048 Jy
! Component: 1150  -  total flux cleaned = -0.00621309 Jy
! Component: 1200  -  total flux cleaned = -0.0064946 Jy
! Component: 1250  -  total flux cleaned = -0.00668011 Jy
! Component: 1300  -  total flux cleaned = -0.00695152 Jy
! Component: 1350  -  total flux cleaned = -0.00722108 Jy
! Component: 1400  -  total flux cleaned = -0.00765776 Jy
! Component: 1450  -  total flux cleaned = -0.00774474 Jy
! Component: 1500  -  total flux cleaned = -0.00816889 Jy
! Component: 1550  -  total flux cleaned = -0.00850093 Jy
! Component: 1600  -  total flux cleaned = -0.00882791 Jy
! Component: 1650  -  total flux cleaned = -0.00930892 Jy
! Component: 1700  -  total flux cleaned = -0.00938727 Jy
! Component: 1750  -  total flux cleaned = -0.00969923 Jy
! Component: 1800  -  total flux cleaned = -0.00992842 Jy
! Component: 1850  -  total flux cleaned = -0.0100797 Jy
! Component: 1900  -  total flux cleaned = -0.010453 Jy
! Component: 1950  -  total flux cleaned = -0.0108211 Jy
! Component: 2000  -  total flux cleaned = -0.0110394 Jy
! Component: 2050  -  total flux cleaned = -0.01154 Jy
! Component: 2100  -  total flux cleaned = -0.0116812 Jy
! Component: 2150  -  total flux cleaned = -0.0120299 Jy
! Component: 2200  -  total flux cleaned = -0.0123062 Jy
! Component: 2250  -  total flux cleaned = -0.0125117 Jy
! Component: 2300  -  total flux cleaned = -0.0126477 Jy
! Component: 2350  -  total flux cleaned = -0.0129823 Jy
! Component: 2400  -  total flux cleaned = -0.0129151 Jy
! Component: 2450  -  total flux cleaned = -0.0131122 Jy
! Component: 2500  -  total flux cleaned = -0.0133084 Jy
! Component: 2550  -  total flux cleaned = -0.0135674 Jy
! Component: 2600  -  total flux cleaned = -0.01376 Jy
! Component: 2650  -  total flux cleaned = -0.0139505 Jy
! Component: 2700  -  total flux cleaned = -0.0140766 Jy
! Component: 2750  -  total flux cleaned = -0.0141397 Jy
! Component: 2800  -  total flux cleaned = -0.014264 Jy
! Component: 2850  -  total flux cleaned = -0.014326 Jy
! Component: 2900  -  total flux cleaned = -0.0145096 Jy
! Component: 2950  -  total flux cleaned = -0.0146922 Jy
! Component: 3000  -  total flux cleaned = -0.014692 Jy
! Component: 3050  -  total flux cleaned = -0.0147524 Jy
! Component: 3100  -  total flux cleaned = -0.0149915 Jy
! Component: 3150  -  total flux cleaned = -0.0151692 Jy
! Component: 3200  -  total flux cleaned = -0.0152284 Jy
! Component: 3250  -  total flux cleaned = -0.0154628 Jy
! Component: 3300  -  total flux cleaned = -0.0156373 Jy
! Component: 3350  -  total flux cleaned = -0.0158107 Jy
! Component: 3400  -  total flux cleaned = -0.0159254 Jy
! Component: 3450  -  total flux cleaned = -0.0162117 Jy
! Component: 3500  -  total flux cleaned = -0.0164399 Jy
! Component: 3550  -  total flux cleaned = -0.016724 Jy
! Component: 3600  -  total flux cleaned = -0.0170075 Jy
! Component: 3650  -  total flux cleaned = -0.0171202 Jy
! Component: 3700  -  total flux cleaned = -0.0174588 Jy
! Component: 3750  -  total flux cleaned = -0.0177963 Jy
! Component: 3800  -  total flux cleaned = -0.018021 Jy
! Component: 3850  -  total flux cleaned = -0.018245 Jy
! Component: 3900  -  total flux cleaned = -0.0185806 Jy
! Component: 3950  -  total flux cleaned = -0.0189156 Jy
! Component: 4000  -  total flux cleaned = -0.0191384 Jy
! Component: 4050  -  total flux cleaned = -0.0193607 Jy
! Total flux subtracted in 4096 components = -0.0196385 Jy
! Clean residual min=-0.003877 max=0.002957 Jy/beam
! Clean residual mean=0.000009 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 1.29514 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 450 components and 1.29514 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J1802-3940_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.416 x 19.46 at 1.056 degrees (North through East)
! Clean map  min=-0.012678  max=1.0124 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1802-3940_S_map.fits
wmodel /scr/pima/rv119_uvs/J1802-3940_S_map.mod
! Writing 450 model components to file: /scr/pima/rv119_uvs/J1802-3940_S_map.mod
wobs   /scr/pima/rv119_uvs/J1802-3940_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J1802-3940_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J1802-3940_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv119_uvs/J1802-3940_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.01244 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00104283 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.309004 0.309004 0.618008 1.23602 2.47203 4.94406 9.88812 19.7762 39.5525 79.105
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0031 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.012 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  970.861 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J1802-3940_S_dfm.log closed on Sun Dec 17 11:38:29 2017