! Started logfile: /scr/pima/rv119_uvs/J1537+2300_S_dfm.log on Sun Dec 17 11:37:27 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J1537+2300_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J1537+2300_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.815152 visibilities/baseline/integration-bin.
! Found source: J1537+2300
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 6456 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1537+2300_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007927Jy  sigma=19.538827
! Fit after  self-cal, rms=0.940818Jy  sigma=18.332864
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.126 mas, bmaj=7.609 mas, bpa=-21.78 degrees
! Estimated noise=0.844952 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0465041 Jy
! Component: 100  -  total flux cleaned = 0.056776 Jy
! Total flux subtracted in 100 components = 0.056776 Jy
! Clean residual min=-0.005547 max=0.005100 Jy/beam
! Clean residual mean=-0.000003 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.056776 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.056776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082956Jy  sigma=1.196760
! Fit after  self-cal, rms=0.082016Jy  sigma=1.172198
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=8.378 mas, bpa=-18.54 degrees
! Estimated noise=0.481912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473725 Jy
! Component: 100  -  total flux cleaned = 0.00676369 Jy
! Component: 150  -  total flux cleaned = 0.00723866 Jy
! Component: 200  -  total flux cleaned = 0.00753103 Jy
! Total flux subtracted in 200 components = 0.00753103 Jy
! Clean residual min=-0.003494 max=0.003691 Jy/beam
! Clean residual mean=0.000013 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.0643071 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 32 components and 0.0643071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081563Jy  sigma=1.168437
! Fit after  self-cal, rms=0.081545Jy  sigma=1.168249
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.948 x 8.378 at -18.54 degrees (North through East)
! Clean map  min=-0.0034175  max=0.061041 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.03     KP        1.05     
!   LA        0.97     MK        1.09     NL        1.05     OV        1.05     
!   PT        1.04     SC        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.22     HN        1.03     KP        1.08     
!   LA        1.06     MK        1.02     NL        1.06     OV        1.04     
!   PT        1.00     SC        1.13     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.12     HN        1.15     KP        0.36     
!   LA        1.04     MK        0.79     NL        1.00*    OV        1.15     
!   PT        1.08     SC        0.44     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.02     KP        1.08     
!   LA        1.05     MK        1.10     NL        1.00     OV        1.01     
!   PT        1.08     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.081545Jy  sigma=1.168249
! Fit after  self-cal, rms=0.056304Jy  sigma=1.103863
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.901 mas, bmaj=8.399 mas, bpa=-18.13 degrees
! Estimated noise=0.478956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107128 Jy
! Component: 100  -  total flux cleaned = 0.00102319 Jy
! Component: 150  -  total flux cleaned = 0.000954439 Jy
! Component: 200  -  total flux cleaned = 0.000915934 Jy
! Total flux subtracted in 200 components = 0.000915934 Jy
! Clean residual min=-0.002067 max=0.002529 Jy/beam
! Clean residual mean=0.000005 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.065223 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.065223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056281Jy  sigma=1.102955
! Fit after  self-cal, rms=0.057073Jy  sigma=1.087635
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057073Jy  sigma=1.087635
! Fit after  self-cal, rms=0.058988Jy  sigma=1.078163
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.86 mas, bmaj=8.425 mas, bpa=-18.01 degrees
! Estimated noise=0.481345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105478 Jy
! Component: 100  -  total flux cleaned = 0.000975283 Jy
! Component: 150  -  total flux cleaned = 0.000869033 Jy
! Component: 200  -  total flux cleaned = 0.000833468 Jy
! Total flux subtracted in 200 components = 0.000833468 Jy
! Clean residual min=-0.001986 max=0.002229 Jy/beam
! Clean residual mean=0.000009 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.0660565 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.0660565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058963Jy  sigma=1.077412
! Fit after  self-cal, rms=0.059316Jy  sigma=1.076066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00026976 Jy
! Component: 100  -  total flux cleaned = -0.00030312 Jy
! Component: 150  -  total flux cleaned = -0.000317437 Jy
! Component: 200  -  total flux cleaned = -0.000344273 Jy
! Total flux subtracted in 200 components = -0.000344273 Jy
! Clean residual min=-0.002071 max=0.002152 Jy/beam
! Clean residual mean=0.000009 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.0657122 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.0657122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059309Jy  sigma=1.075760
! Fit after  self-cal, rms=0.059312Jy  sigma=1.075749
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059312Jy  sigma=1.075749
! Fit after  self-cal, rms=0.059866Jy  sigma=1.075250
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.812 mas, bmaj=8.419 mas, bpa=-18.26 degrees
! Estimated noise=0.481905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00090663 Jy
! Component: 100  -  total flux cleaned = 0.00100753 Jy
! Component: 150  -  total flux cleaned = 0.000963544 Jy
! Component: 200  -  total flux cleaned = 0.00092579 Jy
! Total flux subtracted in 200 components = 0.00092579 Jy
! Clean residual min=-0.001985 max=0.002168 Jy/beam
! Clean residual mean=0.000009 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.066638 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 58 components and 0.066638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059850Jy  sigma=1.074908
! Fit after  self-cal, rms=0.059933Jy  sigma=1.074805
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.56376e-05 Jy
! Component: 100  -  total flux cleaned = -7.5842e-05 Jy
! Component: 150  -  total flux cleaned = -8.59006e-05 Jy
! Component: 200  -  total flux cleaned = -9.54834e-05 Jy
! Total flux subtracted in 200 components = -9.54834e-05 Jy
! Clean residual min=-0.001986 max=0.002130 Jy/beam
! Clean residual mean=0.000009 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.0665425 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 58 components and 0.0665425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059930Jy  sigma=1.074686
! Fit after  self-cal, rms=0.059932Jy  sigma=1.074682
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059932Jy  sigma=1.074682
! Fit after  self-cal, rms=0.060080Jy  sigma=1.074481
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.337 mas, bmaj=10.51 mas, bpa=-4.961 degrees
! Estimated noise=0.586778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000814639 Jy
! Component: 100  -  total flux cleaned = 0.000951631 Jy
! Component: 150  -  total flux cleaned = 0.000963005 Jy
! Component: 200  -  total flux cleaned = 0.000962873 Jy
! Total flux subtracted in 200 components = 0.000962873 Jy
! Clean residual min=-0.002144 max=0.002133 Jy/beam
! Clean residual mean=0.000017 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.0675054 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 65 components and 0.0675054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060077Jy  sigma=1.074577
! Fit after  self-cal, rms=0.060099Jy  sigma=1.074538
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.81045e-05 Jy
! Component: 100  -  total flux cleaned = 6.18367e-06 Jy
! Component: 150  -  total flux cleaned = -5.51807e-07 Jy
! Component: 200  -  total flux cleaned = -1.34676e-05 Jy
! Total flux subtracted in 200 components = -1.34676e-05 Jy
! Clean residual min=-0.002122 max=0.002096 Jy/beam
! Clean residual mean=0.000017 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.0674919 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.0674919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060101Jy  sigma=1.074637
! Fit after  self-cal, rms=0.060103Jy  sigma=1.074633
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=8.404 mas, bpa=-18.46 degrees
! Estimated noise=0.481837 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.771 x 8.404 at -18.46 degrees (North through East)
! Clean map  min=-0.0019304  max=0.060161 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.959 mas, bmaj=7.716 mas, bpa=-21.45 degrees
! Estimated noise=0.832152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0466628 Jy
! Component: 100  -  total flux cleaned = 0.0575918 Jy
! Component: 150  -  total flux cleaned = 0.0619512 Jy
! Component: 200  -  total flux cleaned = 0.063636 Jy
! Total flux subtracted in 200 components = 0.063636 Jy
! Clean residual min=-0.003689 max=0.004225 Jy/beam
! Clean residual mean=-0.000002 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.063636 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.063636 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=8.404 mas, bpa=-18.46 degrees
! Estimated noise=0.481837 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237122 Jy
! Component: 100  -  total flux cleaned = 0.00314311 Jy
! Component: 150  -  total flux cleaned = 0.0035372 Jy
! Component: 200  -  total flux cleaned = 0.00382179 Jy
! Total flux subtracted in 200 components = 0.00382179 Jy
! Clean residual min=-0.002055 max=0.001953 Jy/beam
! Clean residual mean=0.000008 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0674578 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.0674578 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.337 mas, bmaj=10.51 mas, bpa=-4.961 degrees
! Estimated noise=0.586778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027412 Jy
! Component: 100  -  total flux cleaned = 0.00025579 Jy
! Component: 150  -  total flux cleaned = 0.000220896 Jy
! Component: 200  -  total flux cleaned = 0.000206854 Jy
! Total flux subtracted in 200 components = 0.000206854 Jy
! Clean residual min=-0.002199 max=0.002065 Jy/beam
! Clean residual mean=0.000016 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.0676646 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.91983e-07 Jy
! Component: 100  -  total flux cleaned = 1.20164e-05 Jy
! Component: 150  -  total flux cleaned = 1.21755e-05 Jy
! Component: 200  -  total flux cleaned = 2.05069e-05 Jy
! Total flux subtracted in 200 components = 2.05069e-05 Jy
! Clean residual min=-0.002169 max=0.002074 Jy/beam
! Clean residual mean=0.000016 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.0676851 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 73 components and 0.0676851 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=8.404 mas, bpa=-18.46 degrees
! Estimated noise=0.481837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.03653e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107629 Jy
! Component: 150  -  total flux cleaned = 0.000160781 Jy
! Component: 200  -  total flux cleaned = 0.000186271 Jy
! Total flux subtracted in 200 components = 0.000186271 Jy
! Clean residual min=-0.001989 max=0.001930 Jy/beam
! Clean residual mean=0.000009 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.0678714 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 85 components and 0.0678714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060014Jy  sigma=1.074275
! Fit after  self-cal, rms=0.059996Jy  sigma=1.074018
wmodel J1537+2300_S_map.mod
! Writing 85 model components to file: J1537+2300_S_map.mod
wobs   J1537+2300_S_uvs.fits
! Writing UV FITS file: J1537+2300_S_uvs.fits
wwins  J1537+2300_S_map.win
! wwins: Wrote 2 windows to J1537+2300_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.61369e-05 Jy
! Component: 100  -  total flux cleaned = 0.000220918 Jy
! Component: 150  -  total flux cleaned = 0.000437386 Jy
! Component: 200  -  total flux cleaned = 0.000585647 Jy
! Component: 250  -  total flux cleaned = 0.000756586 Jy
! Component: 300  -  total flux cleaned = 0.00086692 Jy
! Component: 350  -  total flux cleaned = 0.000947326 Jy
! Component: 400  -  total flux cleaned = 0.000895275 Jy
! Component: 450  -  total flux cleaned = 0.000971357 Jy
! Component: 500  -  total flux cleaned = 0.000921538 Jy
! Component: 550  -  total flux cleaned = 0.000971 Jy
! Component: 600  -  total flux cleaned = 0.000970835 Jy
! Component: 650  -  total flux cleaned = 0.000922527 Jy
! Component: 700  -  total flux cleaned = 0.000922451 Jy
! Component: 750  -  total flux cleaned = 0.000922319 Jy
! Component: 800  -  total flux cleaned = 0.000899706 Jy
! Component: 850  -  total flux cleaned = 0.000921682 Jy
! Component: 900  -  total flux cleaned = 0.0008338 Jy
! Component: 950  -  total flux cleaned = 0.000855746 Jy
! Component: 1000  -  total flux cleaned = 0.000855967 Jy
! Component: 1050  -  total flux cleaned = 0.000898398 Jy
! Component: 1100  -  total flux cleaned = 0.000919199 Jy
! Component: 1150  -  total flux cleaned = 0.000981004 Jy
! Component: 1200  -  total flux cleaned = 0.000981325 Jy
! Component: 1250  -  total flux cleaned = 0.0010418 Jy
! Component: 1300  -  total flux cleaned = 0.00106158 Jy
! Component: 1350  -  total flux cleaned = 0.0011205 Jy
! Component: 1400  -  total flux cleaned = 0.00112076 Jy
! Component: 1450  -  total flux cleaned = 0.00115946 Jy
! Component: 1500  -  total flux cleaned = 0.00125466 Jy
! Component: 1550  -  total flux cleaned = 0.00140462 Jy
! Component: 1600  -  total flux cleaned = 0.00131142 Jy
! Component: 1650  -  total flux cleaned = 0.00136704 Jy
! Component: 1700  -  total flux cleaned = 0.00149439 Jy
! Component: 1750  -  total flux cleaned = 0.00147632 Jy
! Component: 1800  -  total flux cleaned = 0.00156559 Jy
! Component: 1850  -  total flux cleaned = 0.0016189 Jy
! Component: 1900  -  total flux cleaned = 0.00165365 Jy
! Component: 1950  -  total flux cleaned = 0.00168829 Jy
! Component: 2000  -  total flux cleaned = 0.00177397 Jy
! Component: 2050  -  total flux cleaned = 0.00180782 Jy
! Component: 2100  -  total flux cleaned = 0.00184153 Jy
! Component: 2150  -  total flux cleaned = 0.00194185 Jy
! Component: 2200  -  total flux cleaned = 0.00195827 Jy
! Component: 2250  -  total flux cleaned = 0.00199118 Jy
! Component: 2300  -  total flux cleaned = 0.00207251 Jy
! Component: 2350  -  total flux cleaned = 0.00204045 Jy
! Component: 2400  -  total flux cleaned = 0.00205634 Jy
! Component: 2450  -  total flux cleaned = 0.00205635 Jy
! Component: 2500  -  total flux cleaned = 0.00210344 Jy
! Component: 2550  -  total flux cleaned = 0.00197853 Jy
! Component: 2600  -  total flux cleaned = 0.00204055 Jy
! Component: 2650  -  total flux cleaned = 0.0020711 Jy
! Component: 2700  -  total flux cleaned = 0.00202525 Jy
! Component: 2750  -  total flux cleaned = 0.00201016 Jy
! Component: 2800  -  total flux cleaned = 0.00199517 Jy
! Component: 2850  -  total flux cleaned = 0.00199524 Jy
! Component: 2900  -  total flux cleaned = 0.00202488 Jy
! Component: 2950  -  total flux cleaned = 0.0019806 Jy
! Component: 3000  -  total flux cleaned = 0.00199527 Jy
! Component: 3050  -  total flux cleaned = 0.00203867 Jy
! Component: 3100  -  total flux cleaned = 0.00202429 Jy
! Component: 3150  -  total flux cleaned = 0.00200989 Jy
! Component: 3200  -  total flux cleaned = 0.0019815 Jy
! Component: 3250  -  total flux cleaned = 0.00203775 Jy
! Component: 3300  -  total flux cleaned = 0.00198179 Jy
! Component: 3350  -  total flux cleaned = 0.00196804 Jy
! Component: 3400  -  total flux cleaned = 0.0019403 Jy
! Component: 3450  -  total flux cleaned = 0.00189938 Jy
! Component: 3500  -  total flux cleaned = 0.00196756 Jy
! Component: 3550  -  total flux cleaned = 0.00192677 Jy
! Component: 3600  -  total flux cleaned = 0.00188632 Jy
! Component: 3650  -  total flux cleaned = 0.00194005 Jy
! Component: 3700  -  total flux cleaned = 0.00188685 Jy
! Component: 3750  -  total flux cleaned = 0.00188685 Jy
! Component: 3800  -  total flux cleaned = 0.00184746 Jy
! Component: 3850  -  total flux cleaned = 0.00191284 Jy
! Component: 3900  -  total flux cleaned = 0.0019257 Jy
! Component: 3950  -  total flux cleaned = 0.00191274 Jy
! Component: 4000  -  total flux cleaned = 0.00193841 Jy
! Component: 4050  -  total flux cleaned = 0.00196391 Jy
! Total flux subtracted in 4096 components = 0.00192585 Jy
! Clean residual min=-0.000758 max=0.000665 Jy/beam
! Clean residual mean=0.000004 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0697973 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 398 components and 0.0697972 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J1537+2300_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.771 x 8.404 at -18.46 degrees (North through East)
! Clean map  min=-0.0013925  max=0.06056 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1537+2300_S_map.fits
wmodel /scr/pima/rv119_uvs/J1537+2300_S_map.mod
! Writing 398 model components to file: /scr/pima/rv119_uvs/J1537+2300_S_map.mod
wobs   /scr/pima/rv119_uvs/J1537+2300_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J1537+2300_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J1537+2300_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv119_uvs/J1537+2300_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0605599 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000243411 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.2058 1.2058 2.4116 4.82321 9.64642 19.2928 38.5857 77.1713
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.06 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  248.797 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J1537+2300_S_dfm.log closed on Sun Dec 17 11:37:32 2017