! Started logfile: /scr/pima/rv119_uvs/J1439+3712_S_dfm.log on Sun Dec 17 11:37:07 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv119_uvs/J1439+3712_S_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J1439+3712_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.768687 visibilities/baseline/integration-bin. ! Found source: J1439+3712 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 6088 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1439+3712_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008726Jy sigma=19.053815 ! Fit after self-cal, rms=0.945329Jy sigma=18.057186 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=4.047 mas, bpa=-7.108 degrees ! Estimated noise=0.902009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440095 Jy ! Component: 100 - total flux cleaned = 0.0539036 Jy ! Total flux subtracted in 100 components = 0.0539036 Jy ! Clean residual min=-0.006840 max=0.007513 Jy/beam ! Clean residual mean=0.000003 rms=0.001838 Jy/beam ! Combined flux in latest and established models = 0.0539036 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0539036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107878Jy sigma=1.237668 ! Fit after self-cal, rms=0.107209Jy sigma=1.215800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=5.041 mas, bpa=-5.376 degrees ! Estimated noise=0.50961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376768 Jy ! Component: 100 - total flux cleaned = 0.00536898 Jy ! Component: 150 - total flux cleaned = 0.005728 Jy ! Component: 200 - total flux cleaned = 0.00592807 Jy ! Total flux subtracted in 200 components = 0.00592807 Jy ! Clean residual min=-0.004088 max=0.004000 Jy/beam ! Clean residual mean=0.000001 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.0598316 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0598316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106913Jy sigma=1.214974 ! Fit after self-cal, rms=0.106902Jy sigma=1.214847 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.907 x 5.041 at -5.376 degrees (North through East) ! Clean map min=-0.0038864 max=0.056919 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.95 KP 0.99 ! LA 1.05 MK 1.12 NL 1.02 OV 1.06 ! PT 1.01 SC 1.22 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.08 KP 1.06 ! LA 1.06 MK 1.06 NL 1.12 OV 1.03 ! PT 1.03 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.05 HN 1.18 KP 0.31 ! LA 1.43 MK 1.04 NL 1.00* OV 1.25 ! PT 1.15 SC 0.42 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 0.97 KP 1.04 ! LA 1.03 MK 1.07 NL 0.98 OV 1.00 ! PT 0.98 SC 1.32 ! ! ! Fit before self-cal, rms=0.106902Jy sigma=1.214847 ! Fit after self-cal, rms=0.060054Jy sigma=1.147237 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=4.999 mas, bpa=0.4837 degrees ! Estimated noise=0.509646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106778 Jy ! Component: 100 - total flux cleaned = 0.00112747 Jy ! Component: 150 - total flux cleaned = 0.0011507 Jy ! Component: 200 - total flux cleaned = 0.00119035 Jy ! Total flux subtracted in 200 components = 0.00119035 Jy ! Clean residual min=-0.002435 max=0.002668 Jy/beam ! Clean residual mean=-0.000005 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.061022 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.061022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060014Jy sigma=1.146309 ! Fit after self-cal, rms=0.061362Jy sigma=1.120182 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061362Jy sigma=1.120182 ! Fit after self-cal, rms=0.068749Jy sigma=1.105658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.749 mas, bmaj=5.015 mas, bpa=2.863 degrees ! Estimated noise=0.514838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378792 Jy ! Component: 100 - total flux cleaned = 0.000290894 Jy ! Component: 150 - total flux cleaned = 0.000255621 Jy ! Component: 200 - total flux cleaned = 0.000255066 Jy ! Total flux subtracted in 200 components = 0.000255066 Jy ! Clean residual min=-0.002306 max=0.002227 Jy/beam ! Clean residual mean=-0.000004 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0612771 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0612771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068733Jy sigma=1.105374 ! Fit after self-cal, rms=0.070434Jy sigma=1.100606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (100, -93.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118329 Jy ! Component: 100 - total flux cleaned = 0.000969205 Jy ! Component: 150 - total flux cleaned = 0.000694569 Jy ! Component: 200 - total flux cleaned = 0.000458537 Jy ! Total flux subtracted in 200 components = 0.000458537 Jy ! Clean residual min=-0.002180 max=0.002192 Jy/beam ! Clean residual mean=-0.000007 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0617356 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.0617356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070337Jy sigma=1.098531 ! Fit after self-cal, rms=0.070448Jy sigma=1.098174 ! Inverting map ! Added new window around map position (-19.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212434 Jy ! Component: 100 - total flux cleaned = 0.00287346 Jy ! Component: 150 - total flux cleaned = 0.00303585 Jy ! Component: 200 - total flux cleaned = 0.00300205 Jy ! Total flux subtracted in 200 components = 0.00300205 Jy ! Clean residual min=-0.002070 max=0.002037 Jy/beam ! Clean residual mean=-0.000007 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0647376 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 0.0647376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070374Jy sigma=1.096326 ! Fit after self-cal, rms=0.070374Jy sigma=1.096018 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070374Jy sigma=1.096018 ! Fit after self-cal, rms=0.077161Jy sigma=1.093016 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=5.028 mas, bpa=3.304 degrees ! Estimated noise=0.515002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102581 Jy ! Component: 100 - total flux cleaned = 0.00110521 Jy ! Component: 150 - total flux cleaned = 0.00114005 Jy ! Component: 200 - total flux cleaned = 0.00120315 Jy ! Total flux subtracted in 200 components = 0.00120315 Jy ! Clean residual min=-0.001953 max=0.001791 Jy/beam ! Clean residual mean=-0.000006 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0659408 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 88 components and 0.0659408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077134Jy sigma=1.091603 ! Fit after self-cal, rms=0.078034Jy sigma=1.090242 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526106 Jy ! Component: 100 - total flux cleaned = 0.000495944 Jy ! Component: 150 - total flux cleaned = 0.00044262 Jy ! Component: 200 - total flux cleaned = 0.000344623 Jy ! Total flux subtracted in 200 components = 0.000344623 Jy ! Clean residual min=-0.001915 max=0.001824 Jy/beam ! Clean residual mean=-0.000008 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0662854 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.0662854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078016Jy sigma=1.089681 ! Fit after self-cal, rms=0.078038Jy sigma=1.089632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078038Jy sigma=1.089632 ! Fit after self-cal, rms=0.085948Jy sigma=1.088457 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.234 mas, bmaj=8.905 mas, bpa=-8.329 degrees ! Estimated noise=0.662208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.70146e-05 Jy ! Component: 100 - total flux cleaned = 6.2733e-06 Jy ! Component: 150 - total flux cleaned = 6.32294e-06 Jy ! Component: 200 - total flux cleaned = 6.0752e-06 Jy ! Total flux subtracted in 200 components = 6.0752e-06 Jy ! Clean residual min=-0.002117 max=0.002101 Jy/beam ! Clean residual mean=-0.000015 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0662915 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.0662915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085948Jy sigma=1.088003 ! Fit after self-cal, rms=0.086784Jy sigma=1.087259 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00053328 Jy ! Component: 100 - total flux cleaned = -0.000519318 Jy ! Component: 150 - total flux cleaned = -0.000492068 Jy ! Component: 200 - total flux cleaned = -0.000441001 Jy ! Total flux subtracted in 200 components = -0.000441001 Jy ! Clean residual min=-0.002125 max=0.002151 Jy/beam ! Clean residual mean=-0.000018 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0658505 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 115 components and 0.0658505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086776Jy sigma=1.086992 ! Fit after self-cal, rms=0.086811Jy sigma=1.086942 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=5.034 mas, bpa=3.589 degrees ! Estimated noise=0.5156 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.704 x 5.034 at 3.589 degrees (North through East) ! Clean map min=-0.0019092 max=0.056414 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=4.067 mas, bpa=2.446 degrees ! Estimated noise=0.886523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435736 Jy ! Component: 100 - total flux cleaned = 0.0535904 Jy ! Component: 150 - total flux cleaned = 0.0567819 Jy ! Component: 200 - total flux cleaned = 0.0587917 Jy ! Total flux subtracted in 200 components = 0.0587917 Jy ! Clean residual min=-0.004860 max=0.004921 Jy/beam ! Clean residual mean=0.000001 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.0587917 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0587917 Jy ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=5.034 mas, bpa=3.589 degrees ! Estimated noise=0.5156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320288 Jy ! Component: 100 - total flux cleaned = 0.00416179 Jy ! Component: 150 - total flux cleaned = 0.00473307 Jy ! Component: 200 - total flux cleaned = 0.00521513 Jy ! Total flux subtracted in 200 components = 0.00521513 Jy ! Clean residual min=-0.002174 max=0.002048 Jy/beam ! Clean residual mean=-0.000007 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0640068 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 48 components and 0.0640068 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.234 mas, bmaj=8.905 mas, bpa=-8.329 degrees ! Estimated noise=0.662208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105304 Jy ! Component: 100 - total flux cleaned = 0.00146915 Jy ! Component: 150 - total flux cleaned = 0.00173552 Jy ! Component: 200 - total flux cleaned = 0.00187229 Jy ! Total flux subtracted in 200 components = 0.00187229 Jy ! Clean residual min=-0.002038 max=0.002106 Jy/beam ! Clean residual mean=-0.000018 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0658791 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.97561e-05 Jy ! Component: 100 - total flux cleaned = 0.000113528 Jy ! Component: 150 - total flux cleaned = 0.000147671 Jy ! Component: 200 - total flux cleaned = 0.000179787 Jy ! Total flux subtracted in 200 components = 0.000179787 Jy ! Clean residual min=-0.002038 max=0.002086 Jy/beam ! Clean residual mean=-0.000018 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0660589 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 76 components and 0.0660589 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=5.034 mas, bpa=3.589 degrees ! Estimated noise=0.5156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229352 Jy ! Component: 100 - total flux cleaned = 0.000153292 Jy ! Component: 150 - total flux cleaned = 0.000216783 Jy ! Component: 200 - total flux cleaned = 0.000273779 Jy ! Total flux subtracted in 200 components = 0.000273779 Jy ! Clean residual min=-0.001912 max=0.001949 Jy/beam ! Clean residual mean=-0.000008 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0663327 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.0663327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086822Jy sigma=1.088435 ! Fit after self-cal, rms=0.086875Jy sigma=1.088015 wmodel J1439+3712_S_map.mod ! Writing 96 model components to file: J1439+3712_S_map.mod wobs J1439+3712_S_uvs.fits ! Writing UV FITS file: J1439+3712_S_uvs.fits wwins J1439+3712_S_map.win ! wwins: Wrote 3 windows to J1439+3712_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641066 Jy ! Component: 100 - total flux cleaned = -0.0011432 Jy ! Component: 150 - total flux cleaned = -0.00146325 Jy ! Component: 200 - total flux cleaned = -0.00174142 Jy ! Component: 250 - total flux cleaned = -0.00198088 Jy ! Component: 300 - total flux cleaned = -0.00230056 Jy ! Component: 350 - total flux cleaned = -0.00249915 Jy ! Component: 400 - total flux cleaned = -0.00277651 Jy ! Component: 450 - total flux cleaned = -0.00304883 Jy ! Component: 500 - total flux cleaned = -0.00331564 Jy ! Component: 550 - total flux cleaned = -0.00365472 Jy ! Component: 600 - total flux cleaned = -0.00388493 Jy ! Component: 650 - total flux cleaned = -0.00408667 Jy ! Component: 700 - total flux cleaned = -0.00431008 Jy ! Component: 750 - total flux cleaned = -0.00450577 Jy ! Component: 800 - total flux cleaned = -0.00464993 Jy ! Component: 850 - total flux cleaned = -0.0048396 Jy ! Component: 900 - total flux cleaned = -0.00497971 Jy ! Component: 950 - total flux cleaned = -0.00507182 Jy ! Component: 1000 - total flux cleaned = -0.0052079 Jy ! Component: 1050 - total flux cleaned = -0.00531979 Jy ! Component: 1100 - total flux cleaned = -0.00536419 Jy ! Component: 1150 - total flux cleaned = -0.00543019 Jy ! Component: 1200 - total flux cleaned = -0.00558175 Jy ! Component: 1250 - total flux cleaned = -0.00564588 Jy ! Component: 1300 - total flux cleaned = -0.00570925 Jy ! Component: 1350 - total flux cleaned = -0.0057931 Jy ! Component: 1400 - total flux cleaned = -0.00589659 Jy ! Component: 1450 - total flux cleaned = -0.00593747 Jy ! Component: 1500 - total flux cleaned = -0.00607925 Jy ! Component: 1550 - total flux cleaned = -0.00599873 Jy ! Component: 1600 - total flux cleaned = -0.00607836 Jy ! Component: 1650 - total flux cleaned = -0.00615685 Jy ! Component: 1700 - total flux cleaned = -0.00621518 Jy ! Component: 1750 - total flux cleaned = -0.00635053 Jy ! Component: 1800 - total flux cleaned = -0.00644628 Jy ! Component: 1850 - total flux cleaned = -0.00644624 Jy ! Component: 1900 - total flux cleaned = -0.00655875 Jy ! Component: 1950 - total flux cleaned = -0.00665223 Jy ! Component: 2000 - total flux cleaned = -0.0067261 Jy ! Component: 2050 - total flux cleaned = -0.00679931 Jy ! Component: 2100 - total flux cleaned = -0.00694459 Jy ! Component: 2150 - total flux cleaned = -0.00694446 Jy ! Component: 2200 - total flux cleaned = -0.00698026 Jy ! Component: 2250 - total flux cleaned = -0.00706883 Jy ! Component: 2300 - total flux cleaned = -0.00712156 Jy ! Component: 2350 - total flux cleaned = -0.00719117 Jy ! Component: 2400 - total flux cleaned = -0.00727775 Jy ! Component: 2450 - total flux cleaned = -0.00731229 Jy ! Component: 2500 - total flux cleaned = -0.0073978 Jy ! Component: 2550 - total flux cleaned = -0.00743167 Jy ! Component: 2600 - total flux cleaned = -0.00749898 Jy ! Component: 2650 - total flux cleaned = -0.00758252 Jy ! Component: 2700 - total flux cleaned = -0.00758251 Jy ! Component: 2750 - total flux cleaned = -0.00763162 Jy ! Component: 2800 - total flux cleaned = -0.00766436 Jy ! Component: 2850 - total flux cleaned = -0.00771317 Jy ! Component: 2900 - total flux cleaned = -0.00777765 Jy ! Component: 2950 - total flux cleaned = -0.00774563 Jy ! Component: 3000 - total flux cleaned = -0.00780925 Jy ! Component: 3050 - total flux cleaned = -0.00777755 Jy ! Component: 3100 - total flux cleaned = -0.00782459 Jy ! Component: 3150 - total flux cleaned = -0.00784037 Jy ! Component: 3200 - total flux cleaned = -0.00791813 Jy ! Component: 3250 - total flux cleaned = -0.00796439 Jy ! Component: 3300 - total flux cleaned = -0.0080719 Jy ! Component: 3350 - total flux cleaned = -0.00810238 Jy ! Component: 3400 - total flux cleaned = -0.0081781 Jy ! Component: 3450 - total flux cleaned = -0.00817823 Jy ! Component: 3500 - total flux cleaned = -0.00828324 Jy ! Component: 3550 - total flux cleaned = -0.00829824 Jy ! Component: 3600 - total flux cleaned = -0.00835749 Jy ! Component: 3650 - total flux cleaned = -0.00841654 Jy ! Component: 3700 - total flux cleaned = -0.00843139 Jy ! Component: 3750 - total flux cleaned = -0.0085482 Jy ! Component: 3800 - total flux cleaned = -0.00859173 Jy ! Component: 3850 - total flux cleaned = -0.00867839 Jy ! Component: 3900 - total flux cleaned = -0.00869272 Jy ! Component: 3950 - total flux cleaned = -0.00882132 Jy ! Component: 4000 - total flux cleaned = -0.0088497 Jy ! Component: 4050 - total flux cleaned = -0.00890643 Jy ! Total flux subtracted in 4096 components = -0.00899098 Jy ! Clean residual min=-0.000819 max=0.001000 Jy/beam ! Clean residual mean=-0.000006 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.0573417 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 384 components and 0.0573417 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J1439+3712_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.704 x 5.034 at 3.589 degrees (North through East) ! Clean map min=-0.0016238 max=0.055895 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1439+3712_S_map.fits wmodel /scr/pima/rv119_uvs/J1439+3712_S_map.mod ! Writing 384 model components to file: /scr/pima/rv119_uvs/J1439+3712_S_map.mod wobs /scr/pima/rv119_uvs/J1439+3712_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J1439+3712_S_uvs.fits wwins /scr/pima/rv119_uvs/J1439+3712_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv119_uvs/J1439+3712_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0558955 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248516 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33382 1.33382 2.66765 5.33529 10.6706 21.3412 42.6823 85.3647 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 224.917 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J1439+3712_S_dfm.log closed on Sun Dec 17 11:37:11 2017