! Started logfile: /scr/pima/rv119_uvs/J1310+3233_S_dfm.log on Sun Dec 17 11:36:41 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv119_uvs/J1310+3233_S_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J1310+3233_S_uva.fits ! AN table 1: 41 integrations on 55 of 55 possible baselines. ! AN table 2: 133 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.241904 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1310+3233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 12220 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1310+3233_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 287 telescope corrections were flagged in sub-array 1. ! A total of 1107 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 287 telescope corrections were flagged in sub-array 1. ! A total of 1107 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 297 telescope corrections were flagged in sub-array 1. ! A total of 1174 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 287 telescope corrections were flagged in sub-array 1. ! A total of 1107 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.068602Jy sigma=14.668055 ! Fit after self-cal, rms=0.718605Jy sigma=9.668275 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.994 mas, bmaj=2.84 mas, bpa=32.56 degrees ! Estimated noise=0.816572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237086 Jy ! Component: 100 - total flux cleaned = 0.299134 Jy ! Total flux subtracted in 100 components = 0.299134 Jy ! Clean residual min=-0.011167 max=0.023108 Jy/beam ! Clean residual mean=-0.000021 rms=0.002959 Jy/beam ! Combined flux in latest and established models = 0.299134 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.299134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203169Jy sigma=1.602742 ! Fit after self-cal, rms=0.203159Jy sigma=1.602477 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023149 Jy ! Component: 100 - total flux cleaned = 0.035416 Jy ! Total flux subtracted in 100 components = 0.035416 Jy ! Clean residual min=-0.011156 max=0.012343 Jy/beam ! Clean residual mean=-0.000010 rms=0.002788 Jy/beam ! Combined flux in latest and established models = 0.33455 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.33455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199186Jy sigma=1.530338 ! Fit after self-cal, rms=0.199176Jy sigma=1.530111 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.172 mas, bmaj=3.188 mas, bpa=33.83 degrees ! Estimated noise=0.547489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107366 Jy ! Component: 100 - total flux cleaned = 0.0154254 Jy ! Component: 150 - total flux cleaned = 0.0161171 Jy ! Component: 200 - total flux cleaned = 0.0164023 Jy ! Total flux subtracted in 200 components = 0.0164023 Jy ! Clean residual min=-0.008483 max=0.008351 Jy/beam ! Clean residual mean=-0.000059 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.350952 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.350952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198272Jy sigma=1.520563 ! Fit after self-cal, rms=0.198259Jy sigma=1.520375 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.172 x 3.188 at 33.83 degrees (North through East) ! Clean map min=-0.0079351 max=0.30339 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.05 KP 1.01 ! LA 1.01 MK 1.03 NL 1.00 NY 0.93 ! OV 1.01 PT 1.01 SC 1.01 ! ! A total of 78 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HH 1.17 HN 1.02 ! KP 1.01 LA 1.00 NL 1.06 NY 0.98 ! ON 1.01 OV 1.01 PT 1.01 SC 1.05 ! WZ 1.00 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.05 KP 1.02 ! LA 1.03 MK 1.03 NL 1.04 NY 0.98 ! OV 1.02 PT 0.99 SC 1.02 ! ! A total of 78 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HH 1.10 HN 1.02 ! KP 1.01 LA 1.00 NL 1.07 NY 1.00 ! ON 1.01 OV 1.00 PT 1.01 SC 1.05 ! WZ 1.03 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.14 KP 0.48 ! LA 1.01 MK 1.51 NL 1.00* NY 1.04 ! OV 1.04 PT 0.99 SC 0.62 ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 HH 1.06 HN 1.08 ! KP 0.34 LA 0.99 NL 1.00* NY 1.09 ! ON 1.08 OV 1.00 PT 0.99 SC 0.43 ! WZ 1.00 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.04 KP 1.03 ! LA 1.03 MK 1.06 NL 1.05 NY 1.04 ! OV 1.02 PT 1.02 SC 1.05 ! ! A total of 78 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HH 1.01 HN 1.02 ! KP 1.02 LA 1.02 NL 1.07 NY 1.04 ! ON 1.09 OV 1.03 PT 1.01 SC 1.06 ! WZ 1.05 ! ! ! Fit before self-cal, rms=0.198259Jy sigma=1.520375 ! Fit after self-cal, rms=0.114009Jy sigma=1.159879 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.196 mas, bmaj=3.338 mas, bpa=31.39 degrees ! Estimated noise=0.553184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010227 Jy ! Component: 100 - total flux cleaned = -0.0012482 Jy ! Component: 150 - total flux cleaned = -0.00136989 Jy ! Component: 200 - total flux cleaned = -0.00136966 Jy ! Total flux subtracted in 200 components = -0.00136966 Jy ! Clean residual min=-0.003763 max=0.003722 Jy/beam ! Clean residual mean=0.000024 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.349583 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.349583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113878Jy sigma=1.158956 ! Fit after self-cal, rms=0.114609Jy sigma=1.153462 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114609Jy sigma=1.153462 ! Fit after self-cal, rms=0.117006Jy sigma=1.099767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.201 mas, bmaj=3.342 mas, bpa=31.08 degrees ! Estimated noise=0.555082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227026 Jy ! Component: 100 - total flux cleaned = 0.00029128 Jy ! Component: 150 - total flux cleaned = 0.000316163 Jy ! Component: 200 - total flux cleaned = 0.000316015 Jy ! Total flux subtracted in 200 components = 0.000316015 Jy ! Clean residual min=-0.003147 max=0.002771 Jy/beam ! Clean residual mean=-0.000004 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.349899 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.349899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116971Jy sigma=1.099585 ! Fit after self-cal, rms=0.117247Jy sigma=1.099037 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.82145e-05 Jy ! Component: 100 - total flux cleaned = 3.7901e-05 Jy ! Component: 150 - total flux cleaned = 1.92058e-05 Jy ! Component: 200 - total flux cleaned = 1.7706e-06 Jy ! Total flux subtracted in 200 components = 1.7706e-06 Jy ! Clean residual min=-0.003179 max=0.002763 Jy/beam ! Clean residual mean=-0.000003 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.3499 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.3499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117235Jy sigma=1.098923 ! Fit after self-cal, rms=0.117232Jy sigma=1.098884 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117232Jy sigma=1.098884 ! Fit after self-cal, rms=0.117242Jy sigma=1.072434 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.205 mas, bmaj=3.342 mas, bpa=31.1 degrees ! Estimated noise=0.555346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401783 Jy ! Component: 100 - total flux cleaned = 0.000374782 Jy ! Component: 150 - total flux cleaned = 0.000374487 Jy ! Component: 200 - total flux cleaned = 0.000356417 Jy ! Total flux subtracted in 200 components = 0.000356417 Jy ! Clean residual min=-0.002496 max=0.002624 Jy/beam ! Clean residual mean=-0.000005 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.350257 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.350257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117221Jy sigma=1.072315 ! Fit after self-cal, rms=0.117320Jy sigma=1.072180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-36.5, -84.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115805 Jy ! Component: 100 - total flux cleaned = 0.00141067 Jy ! Component: 150 - total flux cleaned = 0.00151537 Jy ! Component: 200 - total flux cleaned = 0.00160903 Jy ! Total flux subtracted in 200 components = 0.00160903 Jy ! Clean residual min=-0.002404 max=0.002552 Jy/beam ! Clean residual mean=-0.000004 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.351866 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.351866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117224Jy sigma=1.070918 ! Fit after self-cal, rms=0.117224Jy sigma=1.070850 ! Inverting map ! Added new window around map position (11.5, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226997 Jy ! Component: 100 - total flux cleaned = 0.00226885 Jy ! Component: 150 - total flux cleaned = 0.00231708 Jy ! Component: 200 - total flux cleaned = 0.00241091 Jy ! Total flux subtracted in 200 components = 0.00241091 Jy ! Clean residual min=-0.002301 max=0.002315 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.354277 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 67 components and 0.354277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117136Jy sigma=1.069898 ! Fit after self-cal, rms=0.117113Jy sigma=1.069846 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117113Jy sigma=1.069846 ! Fit after self-cal, rms=0.116994Jy sigma=1.069138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.924 mas, bmaj=9.951 mas, bpa=77.3 degrees ! Estimated noise=0.734937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115495 Jy ! Component: 100 - total flux cleaned = 0.00146085 Jy ! Component: 150 - total flux cleaned = 0.00160943 Jy ! Component: 200 - total flux cleaned = 0.00167442 Jy ! Total flux subtracted in 200 components = 0.00167442 Jy ! Clean residual min=-0.002691 max=0.002659 Jy/beam ! Clean residual mean=0.000010 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.355951 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.355951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116990Jy sigma=1.069042 ! Fit after self-cal, rms=0.117002Jy sigma=1.068963 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.33073e-05 Jy ! Component: 100 - total flux cleaned = 0.000206235 Jy ! Component: 150 - total flux cleaned = 0.000302558 Jy ! Component: 200 - total flux cleaned = 0.000302154 Jy ! Total flux subtracted in 200 components = 0.000302154 Jy ! Clean residual min=-0.002711 max=0.002662 Jy/beam ! Clean residual mean=0.000010 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.356253 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.356253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117002Jy sigma=1.069014 ! Fit after self-cal, rms=0.117003Jy sigma=1.068960 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.341 mas, bpa=31.08 degrees ! Estimated noise=0.555141 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.208 x 3.341 at 31.08 degrees (North through East) ! Clean map min=-0.0023807 max=0.30388 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.017 mas, bmaj=2.938 mas, bpa=29.52 degrees ! Estimated noise=0.826682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238095 Jy ! Component: 100 - total flux cleaned = 0.298818 Jy ! Component: 150 - total flux cleaned = 0.321205 Jy ! Component: 200 - total flux cleaned = 0.332087 Jy ! Total flux subtracted in 200 components = 0.332087 Jy ! Clean residual min=-0.004823 max=0.005683 Jy/beam ! Clean residual mean=-0.000004 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.332087 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.332087 Jy ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.341 mas, bpa=31.08 degrees ! Estimated noise=0.555141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933063 Jy ! Component: 100 - total flux cleaned = 0.0140196 Jy ! Component: 150 - total flux cleaned = 0.0172152 Jy ! Component: 200 - total flux cleaned = 0.0187527 Jy ! Total flux subtracted in 200 components = 0.0187527 Jy ! Clean residual min=-0.002536 max=0.002693 Jy/beam ! Clean residual mean=-0.000004 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.350839 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 37 components and 0.350839 Jy ! Inverting map ! Added new window around map position (-5.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245646 Jy ! Component: 100 - total flux cleaned = 0.00307918 Jy ! Component: 150 - total flux cleaned = 0.00356086 Jy ! Component: 200 - total flux cleaned = 0.00381553 Jy ! Total flux subtracted in 200 components = 0.00381553 Jy ! Clean residual min=-0.002441 max=0.002373 Jy/beam ! Clean residual mean=0.000002 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.354655 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.354655 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.924 mas, bmaj=9.951 mas, bpa=77.3 degrees ! Estimated noise=0.734937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131285 Jy ! Component: 100 - total flux cleaned = 0.00196091 Jy ! Component: 150 - total flux cleaned = 0.00220942 Jy ! Component: 200 - total flux cleaned = 0.00230971 Jy ! Total flux subtracted in 200 components = 0.00230971 Jy ! Clean residual min=-0.002706 max=0.002723 Jy/beam ! Clean residual mean=0.000015 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.356964 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-51, -91). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200043 Jy ! Component: 100 - total flux cleaned = 0.00224311 Jy ! Component: 150 - total flux cleaned = 0.00246008 Jy ! Component: 200 - total flux cleaned = 0.00270581 Jy ! Total flux subtracted in 200 components = 0.00270581 Jy ! Clean residual min=-0.002325 max=0.002213 Jy/beam ! Clean residual mean=0.000005 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.35967 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 92 components and 0.35967 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.341 mas, bpa=31.08 degrees ! Estimated noise=0.555141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508485 Jy ! Component: 100 - total flux cleaned = 0.000782181 Jy ! Component: 150 - total flux cleaned = 0.000719212 Jy ! Component: 200 - total flux cleaned = 0.000779527 Jy ! Total flux subtracted in 200 components = 0.000779527 Jy ! Clean residual min=-0.002332 max=0.002255 Jy/beam ! Clean residual mean=-0.000000 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.36045 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 129 components and 0.36045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116903Jy sigma=1.067358 ! Fit after self-cal, rms=0.116876Jy sigma=1.066997 wmodel J1310+3233_S_map.mod ! Writing 129 model components to file: J1310+3233_S_map.mod wobs J1310+3233_S_uvs.fits ! Writing UV FITS file: J1310+3233_S_uvs.fits wwins J1310+3233_S_map.win ! wwins: Wrote 5 windows to J1310+3233_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126005 Jy ! Component: 100 - total flux cleaned = -0.000249126 Jy ! Component: 150 - total flux cleaned = -0.000406296 Jy ! Component: 200 - total flux cleaned = -0.000596424 Jy ! Component: 250 - total flux cleaned = -0.00070844 Jy ! Component: 300 - total flux cleaned = -0.000855294 Jy ! Component: 350 - total flux cleaned = -0.000999744 Jy ! Component: 400 - total flux cleaned = -0.001106 Jy ! Component: 450 - total flux cleaned = -0.00110559 Jy ! Component: 500 - total flux cleaned = -0.00117553 Jy ! Component: 550 - total flux cleaned = -0.00124484 Jy ! Component: 600 - total flux cleaned = -0.00134689 Jy ! Component: 650 - total flux cleaned = -0.00154885 Jy ! Component: 700 - total flux cleaned = -0.00151503 Jy ! Component: 750 - total flux cleaned = -0.00161506 Jy ! Component: 800 - total flux cleaned = -0.0017138 Jy ! Component: 850 - total flux cleaned = -0.00177915 Jy ! Component: 900 - total flux cleaned = -0.0018764 Jy ! Component: 950 - total flux cleaned = -0.00187671 Jy ! Component: 1000 - total flux cleaned = -0.0020685 Jy ! Component: 1050 - total flux cleaned = -0.00216341 Jy ! Component: 1100 - total flux cleaned = -0.00219471 Jy ! Component: 1150 - total flux cleaned = -0.0022259 Jy ! Component: 1200 - total flux cleaned = -0.00225739 Jy ! Component: 1250 - total flux cleaned = -0.00228833 Jy ! Component: 1300 - total flux cleaned = -0.00241143 Jy ! Component: 1350 - total flux cleaned = -0.00244203 Jy ! Component: 1400 - total flux cleaned = -0.00259389 Jy ! Component: 1450 - total flux cleaned = -0.00274453 Jy ! Component: 1500 - total flux cleaned = -0.00286424 Jy ! Component: 1550 - total flux cleaned = -0.00292359 Jy ! Component: 1600 - total flux cleaned = -0.00298313 Jy ! Component: 1650 - total flux cleaned = -0.00298318 Jy ! Component: 1700 - total flux cleaned = -0.00310049 Jy ! Component: 1750 - total flux cleaned = -0.00324611 Jy ! Component: 1800 - total flux cleaned = -0.00313037 Jy ! Component: 1850 - total flux cleaned = -0.0031881 Jy ! Component: 1900 - total flux cleaned = -0.0033606 Jy ! Component: 1950 - total flux cleaned = -0.00330359 Jy ! Component: 2000 - total flux cleaned = -0.00336041 Jy ! Component: 2050 - total flux cleaned = -0.00344513 Jy ! Component: 2100 - total flux cleaned = -0.00350143 Jy ! Component: 2150 - total flux cleaned = -0.00350121 Jy ! Component: 2200 - total flux cleaned = -0.0035011 Jy ! Component: 2250 - total flux cleaned = -0.00352877 Jy ! Component: 2300 - total flux cleaned = -0.00352854 Jy ! Component: 2350 - total flux cleaned = -0.003501 Jy ! Component: 2400 - total flux cleaned = -0.00355558 Jy ! Component: 2450 - total flux cleaned = -0.00363744 Jy ! Component: 2500 - total flux cleaned = -0.00369177 Jy ! Component: 2550 - total flux cleaned = -0.00374572 Jy ! Component: 2600 - total flux cleaned = -0.00379965 Jy ! Component: 2650 - total flux cleaned = -0.00379964 Jy ! Component: 2700 - total flux cleaned = -0.00385311 Jy ! Component: 2750 - total flux cleaned = -0.00393305 Jy ! Component: 2800 - total flux cleaned = -0.004039 Jy ! Component: 2850 - total flux cleaned = -0.00406528 Jy ! Component: 2900 - total flux cleaned = -0.00401296 Jy ! Component: 2950 - total flux cleaned = -0.00411784 Jy ! Component: 3000 - total flux cleaned = -0.00419626 Jy ! Component: 3050 - total flux cleaned = -0.00409219 Jy ! Component: 3100 - total flux cleaned = -0.00414397 Jy ! Component: 3150 - total flux cleaned = -0.0041957 Jy ! Component: 3200 - total flux cleaned = -0.0042985 Jy ! Component: 3250 - total flux cleaned = -0.0044009 Jy ! Component: 3300 - total flux cleaned = -0.00429868 Jy ! Component: 3350 - total flux cleaned = -0.00424772 Jy ! Component: 3400 - total flux cleaned = -0.00439979 Jy ! Component: 3450 - total flux cleaned = -0.00445031 Jy ! Component: 3500 - total flux cleaned = -0.00447543 Jy ! Component: 3550 - total flux cleaned = -0.00455065 Jy ! Component: 3600 - total flux cleaned = -0.00455056 Jy ! Component: 3650 - total flux cleaned = -0.00460037 Jy ! Component: 3700 - total flux cleaned = -0.00455057 Jy ! Component: 3750 - total flux cleaned = -0.00457521 Jy ! Component: 3800 - total flux cleaned = -0.0046244 Jy ! Component: 3850 - total flux cleaned = -0.00452604 Jy ! Component: 3900 - total flux cleaned = -0.00469757 Jy ! Component: 3950 - total flux cleaned = -0.00474637 Jy ! Component: 4000 - total flux cleaned = -0.00484376 Jy ! Component: 4050 - total flux cleaned = -0.00484362 Jy ! Total flux subtracted in 4096 components = -0.0047952 Jy ! Clean residual min=-0.001249 max=0.001599 Jy/beam ! Clean residual mean=-0.000003 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.355654 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 461 components and 0.355655 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J1310+3233_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.208 x 3.341 at 31.08 degrees (North through East) ! Clean map min=-0.0019382 max=0.30426 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1310+3233_S_map.fits wmodel /scr/pima/rv119_uvs/J1310+3233_S_map.mod ! Writing 461 model components to file: /scr/pima/rv119_uvs/J1310+3233_S_map.mod wobs /scr/pima/rv119_uvs/J1310+3233_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J1310+3233_S_uvs.fits wwins /scr/pima/rv119_uvs/J1310+3233_S_map.win ! wwins: Wrote 6 windows to /scr/pima/rv119_uvs/J1310+3233_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.304265 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000407047 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.401342 0.401342 0.802683 1.60537 3.21073 6.42146 12.8429 25.6859 51.3717 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.304 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 747.493 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J1310+3233_S_dfm.log closed on Sun Dec 17 11:36:46 2017