! Started logfile: /scr/pima/rv119_uvs/J1127-1857_X_dfm.log on Sun Dec 17 11:35:34 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv119_uvs/J1127-1857_X_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J1127-1857_X_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! AN table 2: 12 integrations on 10 of 10 possible baselines.
! AN table 3: 6 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.466184 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1127-1857
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 1544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1127-1857_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  A total of 8 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  A total of 8 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  A total of 8 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  A total of 8 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.413244Jy  sigma=18.721132
! Fit after  self-cal, rms=0.151964Jy  sigma=1.587686
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 3.69% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.7081 mas, bmaj=1.188 mas, bpa=6.207 degrees
! Estimated noise=1.76721 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.788029 Jy
! Component: 100  -  total flux cleaned = 0.962775 Jy
! Total flux subtracted in 100 components = 0.962775 Jy
! Clean residual min=-0.019800 max=0.054535 Jy/beam
! Clean residual mean=0.000038 rms=0.004472 Jy/beam
! Combined flux in latest and established models = 0.962775 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.962775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152916Jy  sigma=1.778877
! Fit after  self-cal, rms=0.152841Jy  sigma=1.778515
! Inverting map 
! Your choice of large map pixels excluded 3.69% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0541096 Jy
! Component: 100  -  total flux cleaned = 0.0830354 Jy
! Total flux subtracted in 100 components = 0.0830354 Jy
! Clean residual min=-0.013801 max=0.019091 Jy/beam
! Clean residual mean=0.000005 rms=0.003403 Jy/beam
! Combined flux in latest and established models = 1.04581 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 19 components and 1.04581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127905Jy  sigma=1.360813
! Fit after  self-cal, rms=0.127703Jy  sigma=1.359535
! Inverting map 
! Your choice of large map pixels excluded 3.69% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 3.69% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8532 mas, bmaj=1.437 mas, bpa=4.795 degrees
! Estimated noise=1.49981 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242149 Jy
! Component: 100  -  total flux cleaned = 0.0364555 Jy
! Component: 150  -  total flux cleaned = 0.0422841 Jy
! Component: 200  -  total flux cleaned = 0.0426574 Jy
! Total flux subtracted in 200 components = 0.0426574 Jy
! Clean residual min=-0.013854 max=0.017159 Jy/beam
! Clean residual mean=-0.000010 rms=0.003334 Jy/beam
! Combined flux in latest and established models = 1.08847 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 1.08847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122511Jy  sigma=1.284379
! Fit after  self-cal, rms=0.122427Jy  sigma=1.283842
! Inverting map 
! Your choice of large map pixels excluded 3.69% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8532 x 1.437 at 4.795 degrees (North through East)
! Clean map  min=-0.012536  max=0.99288 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.07     OV        0.97     
!   PT        0.99     SC        1.01     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.83     HN        1.70     ON        1.01     SC        1.01     
!   WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.98     HH        0.94     HN        1.06     KP        0.98     
!   LA        0.98     NL        1.01     PT        1.02     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.01     KP        0.97     
!   LA        0.99     MK        0.98     NL        1.10     OV        0.98     
!   PT        0.98     SC        1.00     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        1.02     HN        1.62     ON        1.01     SC        1.03     
!   WZ        0.96     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.99     HH        0.96     HN        1.06     KP        0.96     
!   LA        0.99     NL        0.99     PT        1.02     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.02     KP        0.97     
!   LA        0.98     MK        0.98     NL        1.10     OV        0.97     
!   PT        0.99     SC        1.02     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.95     HN        1.59     ON        1.04     SC        1.02     
!   WZ        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.99     HH        1.07     HN        1.06     KP        0.96     
!   LA        1.00     NL        1.00     PT        1.01     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.04     KP        0.98     
!   LA        0.99     MK        0.98     NL        1.11     OV        0.97     
!   PT        0.98     SC        0.98     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        1.14     HN        1.62     ON        1.05     SC        1.02     
!   WZ        0.93     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00     HH        1.26     HN        1.03     KP        0.97     
!   LA        1.00     NL        1.00     PT        1.02     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.122427Jy  sigma=1.283842
! Fit after  self-cal, rms=0.101129Jy  sigma=1.050725
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8569 mas, bmaj=1.518 mas, bpa=3.465 degrees
! Estimated noise=1.50718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00518491 Jy
! Component: 100  -  total flux cleaned = -0.00533155 Jy
! Component: 150  -  total flux cleaned = -0.00545135 Jy
! Component: 200  -  total flux cleaned = -0.00544779 Jy
! Total flux subtracted in 200 components = -0.00544779 Jy
! Clean residual min=-0.010248 max=0.010318 Jy/beam
! Clean residual mean=-0.000001 rms=0.002345 Jy/beam
! Combined flux in latest and established models = 1.08302 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 28 components and 1.08302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100619Jy  sigma=1.046001
! Fit after  self-cal, rms=0.100889Jy  sigma=1.045638
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100889Jy  sigma=1.045638
! Fit after  self-cal, rms=0.091831Jy  sigma=0.896509
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8589 mas, bmaj=1.521 mas, bpa=3.486 degrees
! Estimated noise=1.50728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00270178 Jy
! Component: 100  -  total flux cleaned = -0.00287565 Jy
! Component: 150  -  total flux cleaned = -0.00295456 Jy
! Component: 200  -  total flux cleaned = -0.00295675 Jy
! Total flux subtracted in 200 components = -0.00295675 Jy
! Clean residual min=-0.006782 max=0.006919 Jy/beam
! Clean residual mean=-0.000015 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 1.08006 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 1.08006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091602Jy  sigma=0.894915
! Fit after  self-cal, rms=0.091591Jy  sigma=0.894799
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322286 Jy
! Component: 100  -  total flux cleaned = 0.00252008 Jy
! Component: 150  -  total flux cleaned = 0.00206995 Jy
! Component: 200  -  total flux cleaned = 0.0015507 Jy
! Total flux subtracted in 200 components = 0.0015507 Jy
! Clean residual min=-0.006492 max=0.006842 Jy/beam
! Clean residual mean=-0.000016 rms=0.001585 Jy/beam
! Combined flux in latest and established models = 1.08161 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 1.08161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090627Jy  sigma=0.887508
! Fit after  self-cal, rms=0.090637Jy  sigma=0.886900
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (-9, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440503 Jy
! Component: 100  -  total flux cleaned = 0.00427532 Jy
! Component: 150  -  total flux cleaned = 0.00365332 Jy
! Component: 200  -  total flux cleaned = 0.00330369 Jy
! Total flux subtracted in 200 components = 0.00330369 Jy
! Clean residual min=-0.006186 max=0.006543 Jy/beam
! Clean residual mean=-0.000016 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 1.08492 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 1.08492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089871Jy  sigma=0.881237
! Fit after  self-cal, rms=0.089829Jy  sigma=0.880732
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089829Jy  sigma=0.880732
! Fit after  self-cal, rms=0.086868Jy  sigma=0.823969
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8593 mas, bmaj=1.52 mas, bpa=3.528 degrees
! Estimated noise=1.50716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00200224 Jy
! Component: 100  -  total flux cleaned = -0.00224898 Jy
! Component: 150  -  total flux cleaned = -0.00236451 Jy
! Component: 200  -  total flux cleaned = -0.00267649 Jy
! Total flux subtracted in 200 components = -0.00267649 Jy
! Clean residual min=-0.004856 max=0.005705 Jy/beam
! Clean residual mean=-0.000016 rms=0.001164 Jy/beam
! Combined flux in latest and established models = 1.08224 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 1.08224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086467Jy  sigma=0.820523
! Fit after  self-cal, rms=0.086499Jy  sigma=0.820392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.4, -17.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555443 Jy
! Component: 100  -  total flux cleaned = 0.00614842 Jy
! Component: 150  -  total flux cleaned = 0.00567765 Jy
! Component: 200  -  total flux cleaned = 0.00535147 Jy
! Total flux subtracted in 200 components = 0.00535147 Jy
! Clean residual min=-0.004781 max=0.005258 Jy/beam
! Clean residual mean=-0.000009 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 1.08759 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 1.08759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085796Jy  sigma=0.814727
! Fit after  self-cal, rms=0.085708Jy  sigma=0.814309
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (-4.6, -30.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316255 Jy
! Component: 100  -  total flux cleaned = 0.00317253 Jy
! Component: 150  -  total flux cleaned = 0.00317741 Jy
! Component: 200  -  total flux cleaned = 0.00317905 Jy
! Total flux subtracted in 200 components = 0.00317905 Jy
! Clean residual min=-0.004548 max=0.004964 Jy/beam
! Clean residual mean=-0.000009 rms=0.001107 Jy/beam
! Combined flux in latest and established models = 1.09077 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 82 components and 1.09077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085177Jy  sigma=0.810494
! Fit after  self-cal, rms=0.085138Jy  sigma=0.810284
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (-1.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147864 Jy
! Component: 100  -  total flux cleaned = 0.00161243 Jy
! Component: 150  -  total flux cleaned = 0.00161743 Jy
! Component: 200  -  total flux cleaned = 0.0013668 Jy
! Total flux subtracted in 200 components = 0.0013668 Jy
! Clean residual min=-0.004546 max=0.004992 Jy/beam
! Clean residual mean=-0.000010 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 1.09214 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 94 components and 1.09214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084301Jy  sigma=0.804697
! Fit after  self-cal, rms=0.084275Jy  sigma=0.804283
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (-28.2, -26.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316503 Jy
! Component: 100  -  total flux cleaned = 0.0031537 Jy
! Component: 150  -  total flux cleaned = 0.00292623 Jy
! Component: 200  -  total flux cleaned = 0.00271089 Jy
! Total flux subtracted in 200 components = 0.00271089 Jy
! Clean residual min=-0.004143 max=0.004730 Jy/beam
! Clean residual mean=-0.000008 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 1.09485 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 1.09485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083754Jy  sigma=0.799532
! Fit after  self-cal, rms=0.083723Jy  sigma=0.799273
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (48.4, 19).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407078 Jy
! Component: 100  -  total flux cleaned = 0.00460351 Jy
! Component: 150  -  total flux cleaned = 0.004702 Jy
! Component: 200  -  total flux cleaned = 0.00460741 Jy
! Total flux subtracted in 200 components = 0.00460741 Jy
! Clean residual min=-0.004209 max=0.004317 Jy/beam
! Clean residual mean=-0.000007 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 1.09946 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 111 components and 1.09946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083306Jy  sigma=0.795399
! Fit after  self-cal, rms=0.083295Jy  sigma=0.795231
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083295Jy  sigma=0.795231
! Fit after  self-cal, rms=0.083002Jy  sigma=0.792271
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=2.161 mas, bmaj=4.004 mas, bpa=2.413 degrees
! Estimated noise=1.84674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187018 Jy
! Component: 100  -  total flux cleaned = 0.00242336 Jy
! Component: 150  -  total flux cleaned = 0.00242442 Jy
! Component: 200  -  total flux cleaned = 0.00235772 Jy
! Total flux subtracted in 200 components = 0.00235772 Jy
! Clean residual min=-0.004750 max=0.003870 Jy/beam
! Clean residual mean=-0.000021 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 1.10182 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 130 components and 1.10181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082879Jy  sigma=0.791102
! Fit after  self-cal, rms=0.082862Jy  sigma=0.791032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217707 Jy
! Component: 100  -  total flux cleaned = 0.000218243 Jy
! Component: 150  -  total flux cleaned = 0.000157176 Jy
! Component: 200  -  total flux cleaned = 9.66812e-05 Jy
! Total flux subtracted in 200 components = 9.66812e-05 Jy
! Clean residual min=-0.004775 max=0.003821 Jy/beam
! Clean residual mean=-0.000020 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 1.10191 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 136 components and 1.10191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082797Jy  sigma=0.790477
! Fit after  self-cal, rms=0.082796Jy  sigma=0.790446
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8587 mas, bmaj=1.517 mas, bpa=3.539 degrees
! Estimated noise=1.5067 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8587 x 1.517 at 3.539 degrees (North through East)
! Clean map  min=-0.0059865  max=0.99699 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082796Jy  sigma=0.790446
! Fit after  self-cal, rms=0.076967Jy  sigma=0.687710
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8586 mas, bmaj=1.516 mas, bpa=3.557 degrees
! Estimated noise=1.50637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147705 Jy
! Component: 100  -  total flux cleaned = 0.0017776 Jy
! Component: 150  -  total flux cleaned = 0.00205542 Jy
! Component: 200  -  total flux cleaned = 0.00205577 Jy
! Total flux subtracted in 200 components = 0.00205577 Jy
! Clean residual min=-0.003986 max=0.004215 Jy/beam
! Clean residual mean=-0.000010 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 1.10397 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 142 components and 1.10397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076591Jy  sigma=0.685133
! Fit after  self-cal, rms=0.076551Jy  sigma=0.685049
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (23.4, 34).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267637 Jy
! Component: 100  -  total flux cleaned = 0.00351677 Jy
! Component: 150  -  total flux cleaned = 0.00385882 Jy
! Component: 200  -  total flux cleaned = 0.00393992 Jy
! Total flux subtracted in 200 components = 0.00393992 Jy
! Clean residual min=-0.003964 max=0.004259 Jy/beam
! Clean residual mean=-0.000010 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 1.10791 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 154 components and 1.10791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076118Jy  sigma=0.681916
! Fit after  self-cal, rms=0.076118Jy  sigma=0.681673
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (-47, 48.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220238 Jy
! Component: 100  -  total flux cleaned = 0.00219982 Jy
! Component: 150  -  total flux cleaned = 0.00246152 Jy
! Component: 200  -  total flux cleaned = 0.00295572 Jy
! Total flux subtracted in 200 components = 0.00295572 Jy
! Clean residual min=-0.003867 max=0.003963 Jy/beam
! Clean residual mean=-0.000010 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 1.11086 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 166 components and 1.11086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075686Jy  sigma=0.678008
! Fit after  self-cal, rms=0.075680Jy  sigma=0.677815
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (34.4, -50.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211898 Jy
! Component: 100  -  total flux cleaned = 0.00202508 Jy
! Component: 150  -  total flux cleaned = 0.00169493 Jy
! Component: 200  -  total flux cleaned = 0.00153387 Jy
! Total flux subtracted in 200 components = 0.00153387 Jy
! Clean residual min=-0.003785 max=0.004031 Jy/beam
! Clean residual mean=-0.000009 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 1.1124 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 178 components and 1.1124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075292Jy  sigma=0.675038
! Fit after  self-cal, rms=0.075273Jy  sigma=0.674868
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075273Jy  sigma=0.674868
! Fit after  self-cal, rms=0.075235Jy  sigma=0.673895
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.7113 mas, bmaj=1.245 mas, bpa=5 degrees
! Estimated noise=1.7823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.792186 Jy
! Component: 100  -  total flux cleaned = 0.968196 Jy
! Component: 150  -  total flux cleaned = 1.01928 Jy
! Component: 200  -  total flux cleaned = 1.04358 Jy
! Total flux subtracted in 200 components = 1.04358 Jy
! Clean residual min=-0.009260 max=0.014806 Jy/beam
! Clean residual mean=-0.000003 rms=0.001867 Jy/beam
! Combined flux in latest and established models = 1.04358 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.04358 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8582 mas, bmaj=1.515 mas, bpa=3.554 degrees
! Estimated noise=1.50635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0187263 Jy
! Component: 100  -  total flux cleaned = 0.0302118 Jy
! Component: 150  -  total flux cleaned = 0.0390217 Jy
! Component: 200  -  total flux cleaned = 0.0463786 Jy
! Total flux subtracted in 200 components = 0.0463786 Jy
! Clean residual min=-0.005217 max=0.005941 Jy/beam
! Clean residual mean=-0.000015 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 1.08996 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 43 components and 1.08996 Jy
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (0.2, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00595287 Jy
! Component: 100  -  total flux cleaned = 0.00996998 Jy
! Component: 150  -  total flux cleaned = 0.0136695 Jy
! Component: 200  -  total flux cleaned = 0.0160428 Jy
! Total flux subtracted in 200 components = 0.0160428 Jy
! Clean residual min=-0.004763 max=0.005013 Jy/beam
! Clean residual mean=-0.000014 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 1.106 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 56 components and 1.106 Jy
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (0.6, 10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00356367 Jy
! Component: 100  -  total flux cleaned = 0.00510594 Jy
! Component: 150  -  total flux cleaned = 0.00675936 Jy
! Component: 200  -  total flux cleaned = 0.00781241 Jy
! Total flux subtracted in 200 components = 0.00781241 Jy
! Clean residual min=-0.004444 max=0.004740 Jy/beam
! Clean residual mean=-0.000013 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 1.11381 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 71 components and 1.11381 Jy
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (-26, -24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00304561 Jy
! Component: 100  -  total flux cleaned = 0.00402658 Jy
! Component: 150  -  total flux cleaned = 0.00466017 Jy
! Component: 200  -  total flux cleaned = 0.00542285 Jy
! Total flux subtracted in 200 components = 0.00542285 Jy
! Clean residual min=-0.004068 max=0.004396 Jy/beam
! Clean residual mean=-0.000010 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 1.11924 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 85 components and 1.11924 Jy
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Added new window around map position (18.2, 29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218328 Jy
! Component: 100  -  total flux cleaned = 0.0030557 Jy
! Component: 150  -  total flux cleaned = 0.00376314 Jy
! Component: 200  -  total flux cleaned = 0.00417278 Jy
! Total flux subtracted in 200 components = 0.00417278 Jy
! Clean residual min=-0.003963 max=0.004143 Jy/beam
! Clean residual mean=-0.000009 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 1.12341 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 97 components and 1.12341 Jy
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=2.161 mas, bmaj=4.003 mas, bpa=2.373 degrees
! Estimated noise=1.84763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114871 Jy
! Component: 100  -  total flux cleaned = -0.00103829 Jy
! Component: 150  -  total flux cleaned = -0.000844546 Jy
! Component: 200  -  total flux cleaned = -0.00066349 Jy
! Total flux subtracted in 200 components = -0.00066349 Jy
! Clean residual min=-0.004092 max=0.003909 Jy/beam
! Clean residual mean=-0.000019 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 1.12275 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.62906e-05 Jy
! Component: 100  -  total flux cleaned = 0.000167602 Jy
! Component: 150  -  total flux cleaned = 0.000166036 Jy
! Component: 200  -  total flux cleaned = 0.00016392 Jy
! Total flux subtracted in 200 components = 0.00016392 Jy
! Clean residual min=-0.004002 max=0.003850 Jy/beam
! Clean residual mean=-0.000019 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 1.12291 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 136 components and 1.12291 Jy
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! Estimated beam: bmin=0.8582 mas, bmaj=1.515 mas, bpa=3.554 degrees
! Estimated noise=1.50635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389699 Jy
! Component: 100  -  total flux cleaned = 0.00139494 Jy
! Component: 150  -  total flux cleaned = 0.00151593 Jy
! Component: 200  -  total flux cleaned = 0.00175027 Jy
! Total flux subtracted in 200 components = 0.00175027 Jy
! Clean residual min=-0.003730 max=0.003922 Jy/beam
! Clean residual mean=-0.000008 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 1.12466 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 151 components and 1.12466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076848Jy  sigma=0.681803
! Fit after  self-cal, rms=0.076559Jy  sigma=0.679944
wmodel J1127-1857_X_map.mod
! Writing 151 model components to file: J1127-1857_X_map.mod
wobs   J1127-1857_X_uvs.fits
! Writing UV FITS file: J1127-1857_X_uvs.fits
wwins  J1127-1857_X_map.win
! wwins: Wrote 16 windows to J1127-1857_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135346 Jy
! Component: 100  -  total flux cleaned = 0.00156102 Jy
! Component: 150  -  total flux cleaned = 0.00156173 Jy
! Component: 200  -  total flux cleaned = 0.00110346 Jy
! Component: 250  -  total flux cleaned = 0.000974916 Jy
! Component: 300  -  total flux cleaned = 0.000911596 Jy
! Component: 350  -  total flux cleaned = 0.00097332 Jy
! Component: 400  -  total flux cleaned = 0.000787202 Jy
! Component: 450  -  total flux cleaned = 0.000725807 Jy
! Component: 500  -  total flux cleaned = 0.000665293 Jy
! Component: 550  -  total flux cleaned = 0.000486624 Jy
! Component: 600  -  total flux cleaned = 0.000426841 Jy
! Component: 650  -  total flux cleaned = 0.000310944 Jy
! Component: 700  -  total flux cleaned = 0.000481964 Jy
! Component: 750  -  total flux cleaned = 0.000424409 Jy
! Component: 800  -  total flux cleaned = 0.000424001 Jy
! Component: 850  -  total flux cleaned = 0.000480093 Jy
! Component: 900  -  total flux cleaned = 0.000645348 Jy
! Component: 950  -  total flux cleaned = 0.000590574 Jy
! Component: 1000  -  total flux cleaned = 0.000754971 Jy
! Component: 1050  -  total flux cleaned = 0.000862405 Jy
! Component: 1100  -  total flux cleaned = 0.000862467 Jy
! Component: 1150  -  total flux cleaned = 0.00096872 Jy
! Component: 1200  -  total flux cleaned = 0.00107402 Jy
! Component: 1250  -  total flux cleaned = 0.00123009 Jy
! Component: 1300  -  total flux cleaned = 0.00143756 Jy
! Component: 1350  -  total flux cleaned = 0.00148869 Jy
! Component: 1400  -  total flux cleaned = 0.00154041 Jy
! Component: 1450  -  total flux cleaned = 0.00174332 Jy
! Component: 1500  -  total flux cleaned = 0.00189351 Jy
! Component: 1550  -  total flux cleaned = 0.00184343 Jy
! Component: 1600  -  total flux cleaned = 0.00179368 Jy
! Component: 1650  -  total flux cleaned = 0.00184312 Jy
! Component: 1700  -  total flux cleaned = 0.00189243 Jy
! Component: 1750  -  total flux cleaned = 0.00179542 Jy
! Component: 1800  -  total flux cleaned = 0.00194084 Jy
! Component: 1850  -  total flux cleaned = 0.00170045 Jy
! Component: 1900  -  total flux cleaned = 0.00189155 Jy
! Component: 1950  -  total flux cleaned = 0.00170083 Jy
! Component: 2000  -  total flux cleaned = 0.00184264 Jy
! Component: 2050  -  total flux cleaned = 0.00179559 Jy
! Component: 2100  -  total flux cleaned = 0.00193515 Jy
! Component: 2150  -  total flux cleaned = 0.00179573 Jy
! Component: 2200  -  total flux cleaned = 0.00198037 Jy
! Component: 2250  -  total flux cleaned = 0.00170506 Jy
! Component: 2300  -  total flux cleaned = 0.00175068 Jy
! Component: 2350  -  total flux cleaned = 0.00156907 Jy
! Component: 2400  -  total flux cleaned = 0.00147895 Jy
! Component: 2450  -  total flux cleaned = 0.00138942 Jy
! Component: 2500  -  total flux cleaned = 0.00147853 Jy
! Component: 2550  -  total flux cleaned = 0.00143404 Jy
! Component: 2600  -  total flux cleaned = 0.00156657 Jy
! Component: 2650  -  total flux cleaned = 0.00147867 Jy
! Component: 2700  -  total flux cleaned = 0.00143474 Jy
! Component: 2750  -  total flux cleaned = 0.00156478 Jy
! Component: 2800  -  total flux cleaned = 0.00143468 Jy
! Component: 2850  -  total flux cleaned = 0.0015209 Jy
! Component: 2900  -  total flux cleaned = 0.00139255 Jy
! Component: 2950  -  total flux cleaned = 0.0013074 Jy
! Component: 3000  -  total flux cleaned = 0.00147747 Jy
! Component: 3050  -  total flux cleaned = 0.00135067 Jy
! Component: 3100  -  total flux cleaned = 0.00135069 Jy
! Component: 3150  -  total flux cleaned = 0.00135044 Jy
! Component: 3200  -  total flux cleaned = 0.00126672 Jy
! Component: 3250  -  total flux cleaned = 0.00126645 Jy
! Component: 3300  -  total flux cleaned = 0.00105961 Jy
! Component: 3350  -  total flux cleaned = 0.000977602 Jy
! Component: 3400  -  total flux cleaned = 0.000895658 Jy
! Component: 3450  -  total flux cleaned = 0.000813996 Jy
! Component: 3500  -  total flux cleaned = 0.000814438 Jy
! Component: 3550  -  total flux cleaned = 0.000693146 Jy
! Component: 3600  -  total flux cleaned = 0.00073353 Jy
! Component: 3650  -  total flux cleaned = 0.000493037 Jy
! Component: 3700  -  total flux cleaned = 0.000373093 Jy
! Component: 3750  -  total flux cleaned = 0.000214261 Jy
! Component: 3800  -  total flux cleaned = 0.000214372 Jy
! Component: 3850  -  total flux cleaned = 9.64827e-05 Jy
! Component: 3900  -  total flux cleaned = 1.78859e-05 Jy
! Component: 3950  -  total flux cleaned = 1.80864e-05 Jy
! Component: 4000  -  total flux cleaned = -9.89119e-05 Jy
! Component: 4050  -  total flux cleaned = -6.01161e-05 Jy
! Total flux subtracted in 4096 components = -0.000214818 Jy
! Clean residual min=-0.002199 max=0.002247 Jy/beam
! Clean residual mean=-0.000004 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 1.12444 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 462 components and 1.12444 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J1127-1857_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8582 x 1.515 at 3.554 degrees (North through East)
! Clean map  min=-0.0050994  max=1.0045 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1127-1857_X_map.fits
wmodel /scr/pima/rv119_uvs/J1127-1857_X_map.mod
! Writing 462 model components to file: /scr/pima/rv119_uvs/J1127-1857_X_map.mod
wobs   /scr/pima/rv119_uvs/J1127-1857_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J1127-1857_X_uvs.fits
wwins  /scr/pima/rv119_uvs/J1127-1857_X_map.win
! wwins: Wrote 17 windows to /scr/pima/rv119_uvs/J1127-1857_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.00451 
invert
! Inverting map 
! Your choice of large map pixels excluded 3.75% of the data.
!  The x-axis pixel size should ideally be below 0.1648 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000644322 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.192428 0.192428 0.384856 0.769712 1.53942 3.07885 6.15769 12.3154 24.6308 49.2616 98.5231
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.004 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1559.03 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J1127-1857_X_dfm.log closed on Sun Dec 17 11:35:39 2017