! Started logfile: /scr/pima/rv119_uvs/J1107-4449_S_dfm.log on Sun Dec 17 11:36:17 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J1107-4449_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J1107-4449_S_uva.fits
! AN table 1: 6 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.444444 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1107-4449
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1107-4449_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.540823Jy  sigma=15.684949
! Fit after  self-cal, rms=1.505612Jy  sigma=8.672063
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.809 mas, bmaj=36.04 mas, bpa=-19 degrees
! Estimated noise=14.0172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.23197 Jy
! Component: 100  -  total flux cleaned = 1.75155 Jy
! Total flux subtracted in 100 components = 1.75155 Jy
! Clean residual min=-0.152913 max=0.233109 Jy/beam
! Clean residual mean=-0.002743 rms=0.055564 Jy/beam
! Combined flux in latest and established models = 1.75155 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 1.75155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.100600Jy  sigma=6.160810
! Fit after  self-cal, rms=1.100392Jy  sigma=6.159829
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.354 mas, bmaj=37.05 mas, bpa=-18.77 degrees
! Estimated noise=12.7813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.359158 Jy
! Component: 100  -  total flux cleaned = 0.535653 Jy
! Component: 150  -  total flux cleaned = 0.639616 Jy
! Component: 200  -  total flux cleaned = 0.702813 Jy
! Total flux subtracted in 200 components = 0.702813 Jy
! Clean residual min=-0.167977 max=0.148471 Jy/beam
! Clean residual mean=0.003929 rms=0.053917 Jy/beam
! Combined flux in latest and established models = 2.45437 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 105 components and 2.45437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.954181Jy  sigma=5.381638
! Fit after  self-cal, rms=0.954184Jy  sigma=5.381493
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.354 x 37.05 at -18.77 degrees (North through East)
! Clean map  min=-0.16637  max=1.6369 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        1.11     LA        1.07     MK        1.14     
!   OV        1.06     PT        1.09     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.10     LA        1.10     MK        1.18     
!   OV        1.07     PT        1.09     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        0.40     LA        1.06     MK        0.78     
!   OV        1.03     PT        1.10     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.10     LA        1.11     MK        1.07     
!   OV        1.04     PT        1.09     
! 
! 
! Fit before self-cal, rms=0.954184Jy  sigma=5.381493
! Fit after  self-cal, rms=0.080442Jy  sigma=0.471207
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.127 mas, bmaj=34.73 mas, bpa=-18.8 degrees
! Estimated noise=13.6031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196465 Jy
! Component: 100  -  total flux cleaned = 0.000904147 Jy
! Component: 150  -  total flux cleaned = 0.00151275 Jy
! Component: 200  -  total flux cleaned = 0.00242542 Jy
! Total flux subtracted in 200 components = 0.00242542 Jy
! Clean residual min=-0.017627 max=0.022728 Jy/beam
! Clean residual mean=-0.000563 rms=0.006444 Jy/beam
! Combined flux in latest and established models = 2.45679 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 122 components and 2.45679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078905Jy  sigma=0.458390
! Fit after  self-cal, rms=0.078939Jy  sigma=0.457445
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078939Jy  sigma=0.457445
! Fit after  self-cal, rms=0.079205Jy  sigma=0.456700
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.126 mas, bmaj=34.73 mas, bpa=-18.8 degrees
! Estimated noise=13.5859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020313 Jy
! Component: 100  -  total flux cleaned = 0.0028949 Jy
! Component: 150  -  total flux cleaned = 0.00353161 Jy
! Component: 200  -  total flux cleaned = 0.00412851 Jy
! Total flux subtracted in 200 components = 0.00412851 Jy
! Clean residual min=-0.016335 max=0.022485 Jy/beam
! Clean residual mean=-0.000569 rms=0.006257 Jy/beam
! Combined flux in latest and established models = 2.46092 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 135 components and 2.46092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078447Jy  sigma=0.453342
! Fit after  self-cal, rms=0.078452Jy  sigma=0.453122
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000419994 Jy
! Component: 100  -  total flux cleaned = 0.000972619 Jy
! Component: 150  -  total flux cleaned = 0.00149905 Jy
! Component: 200  -  total flux cleaned = 0.00162526 Jy
! Total flux subtracted in 200 components = 0.00162526 Jy
! Clean residual min=-0.015997 max=0.022402 Jy/beam
! Clean residual mean=-0.000558 rms=0.006122 Jy/beam
! Combined flux in latest and established models = 2.46255 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 146 components and 2.46255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077933Jy  sigma=0.450731
! Fit after  self-cal, rms=0.077967Jy  sigma=0.450514
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077967Jy  sigma=0.450514
! Fit after  self-cal, rms=0.078221Jy  sigma=0.449800
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.122 mas, bmaj=34.72 mas, bpa=-18.8 degrees
! Estimated noise=13.5631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00299989 Jy
! Component: 100  -  total flux cleaned = 0.0038418 Jy
! Component: 150  -  total flux cleaned = 0.00422427 Jy
! Component: 200  -  total flux cleaned = 0.00469855 Jy
! Total flux subtracted in 200 components = 0.00469855 Jy
! Clean residual min=-0.016177 max=0.022436 Jy/beam
! Clean residual mean=-0.000550 rms=0.006026 Jy/beam
! Combined flux in latest and established models = 2.46724 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 158 components and 2.46724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077638Jy  sigma=0.448355
! Fit after  self-cal, rms=0.077687Jy  sigma=0.448142
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000393842 Jy
! Component: 100  -  total flux cleaned = 6.7295e-05 Jy
! Component: 150  -  total flux cleaned = 0.000501845 Jy
! Component: 200  -  total flux cleaned = 0.000920771 Jy
! Total flux subtracted in 200 components = 0.000920771 Jy
! Clean residual min=-0.016227 max=0.022364 Jy/beam
! Clean residual mean=-0.000544 rms=0.005939 Jy/beam
! Combined flux in latest and established models = 2.46816 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 168 components and 2.46816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077289Jy  sigma=0.446817
! Fit after  self-cal, rms=0.077349Jy  sigma=0.446571
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077349Jy  sigma=0.446571
! Fit after  self-cal, rms=0.077519Jy  sigma=0.445902
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.48 mas, bmaj=42.06 mas, bpa=-6.327 degrees
! Estimated noise=18.3538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454772 Jy
! Component: 100  -  total flux cleaned = 0.00578356 Jy
! Component: 150  -  total flux cleaned = 0.00650248 Jy
! Component: 200  -  total flux cleaned = 0.00684495 Jy
! Total flux subtracted in 200 components = 0.00684495 Jy
! Clean residual min=-0.015713 max=0.017909 Jy/beam
! Clean residual mean=-0.000905 rms=0.006161 Jy/beam
! Combined flux in latest and established models = 2.47501 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 176 components and 2.47501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077245Jy  sigma=0.445386
! Fit after  self-cal, rms=0.077241Jy  sigma=0.445207
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361048 Jy
! Component: 100  -  total flux cleaned = 0.000578961 Jy
! Component: 150  -  total flux cleaned = 0.000896078 Jy
! Component: 200  -  total flux cleaned = 0.00120643 Jy
! Total flux subtracted in 200 components = 0.00120643 Jy
! Clean residual min=-0.015300 max=0.017516 Jy/beam
! Clean residual mean=-0.000887 rms=0.006029 Jy/beam
! Combined flux in latest and established models = 2.47622 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 179 components and 2.47622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076974Jy  sigma=0.445284
! Fit after  self-cal, rms=0.076986Jy  sigma=0.445118
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.119 mas, bmaj=34.72 mas, bpa=-18.81 degrees
! Estimated noise=13.5398 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.119 x 34.72 at -18.81 degrees (North through East)
! Clean map  min=-0.019865  max=1.5754 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076986Jy  sigma=0.445118
! Fit after  self-cal, rms=0.077163Jy  sigma=0.444151
! Inverting map and beam 
! Estimated beam: bmin=3.114 mas, bmaj=34.71 mas, bpa=-18.81 degrees
! Estimated noise=13.5125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018087 Jy
! Component: 100  -  total flux cleaned = 0.00289449 Jy
! Component: 150  -  total flux cleaned = 0.00383926 Jy
! Component: 200  -  total flux cleaned = 0.00431419 Jy
! Total flux subtracted in 200 components = 0.00431419 Jy
! Clean residual min=-0.016105 max=0.022573 Jy/beam
! Clean residual mean=-0.000497 rms=0.005782 Jy/beam
! Combined flux in latest and established models = 2.48053 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 188 components and 2.48053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076628Jy  sigma=0.443801
! Fit after  self-cal, rms=0.076693Jy  sigma=0.443593
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000571212 Jy
! Component: 100  -  total flux cleaned = -0.000101062 Jy
! Component: 150  -  total flux cleaned = 0.000248 Jy
! Component: 200  -  total flux cleaned = 0.000583747 Jy
! Total flux subtracted in 200 components = 0.000583747 Jy
! Clean residual min=-0.016100 max=0.022570 Jy/beam
! Clean residual mean=-0.000493 rms=0.005731 Jy/beam
! Combined flux in latest and established models = 2.48111 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 193 components and 2.48111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076403Jy  sigma=0.442935
! Fit after  self-cal, rms=0.076484Jy  sigma=0.442713
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076484Jy  sigma=0.442713
! Fit after  self-cal, rms=0.076608Jy  sigma=0.442111
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.704 mas, bmaj=35.09 mas, bpa=-19.02 degrees
! Estimated noise=15.2657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.18736 Jy
! Component: 100  -  total flux cleaned = 1.70084 Jy
! Component: 150  -  total flux cleaned = 1.96106 Jy
! Component: 200  -  total flux cleaned = 2.09964 Jy
! Total flux subtracted in 200 components = 2.09964 Jy
! Clean residual min=-0.055641 max=0.071878 Jy/beam
! Clean residual mean=-0.003236 rms=0.021480 Jy/beam
! Combined flux in latest and established models = 2.09964 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 57 model components to the UV plane model.
! The established model now contains 57 components and 2.09964 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.111 mas, bmaj=34.7 mas, bpa=-18.81 degrees
! Estimated noise=13.4931 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114096 Jy
! Component: 100  -  total flux cleaned = 0.189794 Jy
! Component: 150  -  total flux cleaned = 0.242471 Jy
! Component: 200  -  total flux cleaned = 0.279556 Jy
! Total flux subtracted in 200 components = 0.279556 Jy
! Clean residual min=-0.026014 max=0.025782 Jy/beam
! Clean residual mean=-0.001388 rms=0.008860 Jy/beam
! Combined flux in latest and established models = 2.3792 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 129 components and 2.3792 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.46 mas, bmaj=41.94 mas, bpa=-6.372 degrees
! Estimated noise=18.3511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0401671 Jy
! Component: 100  -  total flux cleaned = 0.0644619 Jy
! Component: 150  -  total flux cleaned = 0.0804567 Jy
! Component: 200  -  total flux cleaned = 0.091414 Jy
! Total flux subtracted in 200 components = 0.091414 Jy
! Clean residual min=-0.017459 max=0.017125 Jy/beam
! Clean residual mean=-0.001079 rms=0.006765 Jy/beam
! Combined flux in latest and established models = 2.47061 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768132 Jy
! Component: 100  -  total flux cleaned = 0.013076 Jy
! Component: 150  -  total flux cleaned = 0.0159324 Jy
! Component: 200  -  total flux cleaned = 0.016972 Jy
! Total flux subtracted in 200 components = 0.016972 Jy
! Clean residual min=-0.016828 max=0.018184 Jy/beam
! Clean residual mean=-0.000808 rms=0.006341 Jy/beam
! Combined flux in latest and established models = 2.48758 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 197 components and 2.48758 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.111 mas, bmaj=34.7 mas, bpa=-18.81 degrees
! Estimated noise=13.4931 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102388 Jy
! Component: 100  -  total flux cleaned = -0.00118872 Jy
! Component: 150  -  total flux cleaned = -0.00104626 Jy
! Component: 200  -  total flux cleaned = -0.000924902 Jy
! Total flux subtracted in 200 components = -0.000924902 Jy
! Clean residual min=-0.015834 max=0.022384 Jy/beam
! Clean residual mean=-0.000462 rms=0.005772 Jy/beam
! Combined flux in latest and established models = 2.48666 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 215 components and 2.48666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076962Jy  sigma=0.441896
! Fit after  self-cal, rms=0.076883Jy  sigma=0.441407
wmodel J1107-4449_S_map.mod
! Writing 215 model components to file: J1107-4449_S_map.mod
wobs   J1107-4449_S_uvs.fits
! Writing UV FITS file: J1107-4449_S_uvs.fits
wwins  J1107-4449_S_map.win
! wwins: Wrote 1 windows to J1107-4449_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00896478 Jy
! Component: 100  -  total flux cleaned = 0.00870638 Jy
! Component: 150  -  total flux cleaned = 0.00742138 Jy
! Component: 200  -  total flux cleaned = 0.00572137 Jy
! Component: 250  -  total flux cleaned = 0.00409065 Jy
! Component: 300  -  total flux cleaned = 0.00209499 Jy
! Component: 350  -  total flux cleaned = 0.00103477 Jy
! Component: 400  -  total flux cleaned = -0.00019283 Jy
! Component: 450  -  total flux cleaned = -0.00137112 Jy
! Component: 500  -  total flux cleaned = -0.00213002 Jy
! Component: 550  -  total flux cleaned = -0.00305164 Jy
! Component: 600  -  total flux cleaned = -0.0037693 Jy
! Component: 650  -  total flux cleaned = -0.00481076 Jy
! Component: 700  -  total flux cleaned = -0.00548974 Jy
! Component: 750  -  total flux cleaned = -0.00582454 Jy
! Component: 800  -  total flux cleaned = -0.00599026 Jy
! Component: 850  -  total flux cleaned = -0.00566637 Jy
! Component: 900  -  total flux cleaned = -0.00518614 Jy
! Component: 950  -  total flux cleaned = -0.00454941 Jy
! Component: 1000  -  total flux cleaned = -0.00391672 Jy
! Component: 1050  -  total flux cleaned = -0.00344548 Jy
! Component: 1100  -  total flux cleaned = -0.00297403 Jy
! Component: 1150  -  total flux cleaned = -0.00234675 Jy
! Component: 1200  -  total flux cleaned = -0.00172226 Jy
! Component: 1250  -  total flux cleaned = -0.00125482 Jy
! Component: 1300  -  total flux cleaned = -0.000315762 Jy
! Component: 1350  -  total flux cleaned = 0.000781569 Jy
! Component: 1400  -  total flux cleaned = 0.00156872 Jy
! Component: 1450  -  total flux cleaned = 0.00235746 Jy
! Component: 1500  -  total flux cleaned = 0.00315021 Jy
! Component: 1550  -  total flux cleaned = 0.003948 Jy
! Component: 1600  -  total flux cleaned = 0.00474919 Jy
! Component: 1650  -  total flux cleaned = 0.0052358 Jy
! Component: 1700  -  total flux cleaned = 0.00605816 Jy
! Component: 1750  -  total flux cleaned = 0.00672548 Jy
! Component: 1800  -  total flux cleaned = 0.00723181 Jy
! Component: 1850  -  total flux cleaned = 0.0079208 Jy
! Component: 1900  -  total flux cleaned = 0.00862085 Jy
! Component: 1950  -  total flux cleaned = 0.00915521 Jy
! Component: 2000  -  total flux cleaned = 0.00987968 Jy
! Component: 2050  -  total flux cleaned = 0.0104318 Jy
! Component: 2100  -  total flux cleaned = 0.0108062 Jy
! Component: 2150  -  total flux cleaned = 0.0111911 Jy
! Component: 2200  -  total flux cleaned = 0.0111918 Jy
! Component: 2250  -  total flux cleaned = 0.0115918 Jy
! Component: 2300  -  total flux cleaned = 0.0117991 Jy
! Component: 2350  -  total flux cleaned = 0.0118005 Jy
! Component: 2400  -  total flux cleaned = 0.0117975 Jy
! Component: 2450  -  total flux cleaned = 0.0117962 Jy
! Component: 2500  -  total flux cleaned = 0.0120227 Jy
! Component: 2550  -  total flux cleaned = 0.0120221 Jy
! Component: 2600  -  total flux cleaned = 0.0117816 Jy
! Component: 2650  -  total flux cleaned = 0.0117807 Jy
! Component: 2700  -  total flux cleaned = 0.0117754 Jy
! Component: 2750  -  total flux cleaned = 0.012034 Jy
! Component: 2800  -  total flux cleaned = 0.0120341 Jy
! Component: 2850  -  total flux cleaned = 0.0120296 Jy
! Component: 2900  -  total flux cleaned = 0.0120297 Jy
! Component: 2950  -  total flux cleaned = 0.0120239 Jy
! Component: 3000  -  total flux cleaned = 0.0120189 Jy
! Component: 3050  -  total flux cleaned = 0.0123178 Jy
! Component: 3100  -  total flux cleaned = 0.0123203 Jy
! Component: 3150  -  total flux cleaned = 0.0126413 Jy
! Component: 3200  -  total flux cleaned = 0.0126361 Jy
! Component: 3250  -  total flux cleaned = 0.0132994 Jy
! Component: 3300  -  total flux cleaned = 0.01295 Jy
! Component: 3350  -  total flux cleaned = 0.0136562 Jy
! Component: 3400  -  total flux cleaned = 0.0140176 Jy
! Component: 3450  -  total flux cleaned = 0.0136392 Jy
! Component: 3500  -  total flux cleaned = 0.0140191 Jy
! Component: 3550  -  total flux cleaned = 0.0140143 Jy
! Component: 3600  -  total flux cleaned = 0.0140145 Jy
! Component: 3650  -  total flux cleaned = 0.0140177 Jy
! Component: 3700  -  total flux cleaned = 0.0135889 Jy
! Component: 3750  -  total flux cleaned = 0.0135904 Jy
! Component: 3800  -  total flux cleaned = 0.0131284 Jy
! Component: 3850  -  total flux cleaned = 0.0135878 Jy
! Component: 3900  -  total flux cleaned = 0.013108 Jy
! Component: 3950  -  total flux cleaned = 0.0131043 Jy
! Component: 4000  -  total flux cleaned = 0.013102 Jy
! Component: 4050  -  total flux cleaned = 0.0125784 Jy
! Total flux subtracted in 4096 components = 0.0125743 Jy
! Clean residual min=-0.030873 max=0.028969 Jy/beam
! Clean residual mean=-0.000092 rms=0.010476 Jy/beam
! Combined flux in latest and established models = 2.49923 Jy
keep
! Adding 135 model components to the UV plane model.
! The established model now contains 350 components and 2.49923 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J1107-4449_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.111 x 34.7 at -18.81 degrees (North through East)
! Clean map  min=-0.059329  max=1.5408 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1107-4449_S_map.fits
wmodel /scr/pima/rv119_uvs/J1107-4449_S_map.mod
! Writing 350 model components to file: /scr/pima/rv119_uvs/J1107-4449_S_map.mod
wobs   /scr/pima/rv119_uvs/J1107-4449_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J1107-4449_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J1107-4449_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv119_uvs/J1107-4449_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.54079 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0123728 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.40905 2.40905 4.8181 9.6362 19.2724 38.5448 77.0896
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0371 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.54 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  124.53 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J1107-4449_S_dfm.log closed on Sun Dec 17 11:36:21 2017