! Started logfile: /scr/pima/rv119_uvs/J1107+7232_X_dfm.log on Sun Dec 17 11:35:24 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv119_uvs/J1107+7232_X_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J1107+7232_X_uva.fits ! AN table 1: 66 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.839394 visibilities/baseline/integration-bin. ! Found source: J1107+7232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 9972 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1107+7232_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007779Jy sigma=19.293787 ! Fit after self-cal, rms=0.901288Jy sigma=17.220100 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7372 mas, bmaj=1.136 mas, bpa=36.23 degrees ! Estimated noise=0.695454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0677205 Jy ! Component: 100 - total flux cleaned = 0.0906731 Jy ! Total flux subtracted in 100 components = 0.0906731 Jy ! Clean residual min=-0.004681 max=0.010674 Jy/beam ! Clean residual mean=-0.000003 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.0906731 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0906731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061143Jy sigma=1.091094 ! Fit after self-cal, rms=0.061101Jy sigma=1.090122 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012409 Jy ! Component: 100 - total flux cleaned = 0.0193989 Jy ! Total flux subtracted in 100 components = 0.0193989 Jy ! Clean residual min=-0.003940 max=0.010671 Jy/beam ! Clean residual mean=-0.000003 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.110072 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.110072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057104Jy sigma=1.007361 ! Fit after self-cal, rms=0.057088Jy sigma=1.006926 ! Inverting map ! Added new window around map position (-12.6, 8.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00936202 Jy ! Component: 100 - total flux cleaned = 0.0143102 Jy ! Total flux subtracted in 100 components = 0.0143102 Jy ! Clean residual min=-0.003394 max=0.003442 Jy/beam ! Clean residual mean=-0.000000 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.124382 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.124382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055046Jy sigma=0.963271 ! Fit after self-cal, rms=0.054915Jy sigma=0.960307 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=1.497 mas, bpa=36.44 degrees ! Estimated noise=0.381903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695296 Jy ! Component: 100 - total flux cleaned = 0.011478 Jy ! Component: 150 - total flux cleaned = 0.0145822 Jy ! Component: 200 - total flux cleaned = 0.0167811 Jy ! Total flux subtracted in 200 components = 0.0167811 Jy ! Clean residual min=-0.002282 max=0.004863 Jy/beam ! Clean residual mean=0.000009 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.141163 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 0.141163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053866Jy sigma=0.939021 ! Fit after self-cal, rms=0.053821Jy sigma=0.937750 ! Inverting map ! Added new window around map position (-2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427552 Jy ! Component: 100 - total flux cleaned = 0.00650884 Jy ! Component: 150 - total flux cleaned = 0.00814222 Jy ! Component: 200 - total flux cleaned = 0.00940407 Jy ! Total flux subtracted in 200 components = 0.00940407 Jy ! Clean residual min=-0.001754 max=0.002390 Jy/beam ! Clean residual mean=0.000007 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.150567 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 0.150567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053469Jy sigma=0.929889 ! Fit after self-cal, rms=0.053422Jy sigma=0.928897 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.019 x 1.497 at 36.44 degrees (North through East) ! Clean map min=-0.0016678 max=0.098048 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 0.99 KP 0.98 ! LA 0.97 MK 1.00 NL 1.02 OV 1.06 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00 KP 0.97 ! LA 0.98 MK 1.01 NL 1.02 OV 1.03 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 1.02 KP 1.01 ! LA 0.97 MK 1.00 NL 0.99 OV 1.05 ! PT 0.98 SC 0.88 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.00 KP 1.01 ! LA 1.01 MK 1.02 NL 1.02 OV 1.04 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.053422Jy sigma=0.928897 ! Fit after self-cal, rms=0.052746Jy sigma=0.925157 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=1.503 mas, bpa=36.5 degrees ! Estimated noise=0.379855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225776 Jy ! Component: 100 - total flux cleaned = 0.00360841 Jy ! Component: 150 - total flux cleaned = 0.00459248 Jy ! Component: 200 - total flux cleaned = 0.00504357 Jy ! Total flux subtracted in 200 components = 0.00504357 Jy ! Clean residual min=-0.001699 max=0.001549 Jy/beam ! Clean residual mean=0.000005 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.155611 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 110 components and 0.155611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052635Jy sigma=0.922838 ! Fit after self-cal, rms=0.052615Jy sigma=0.922598 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052615Jy sigma=0.922598 ! Fit after self-cal, rms=0.052878Jy sigma=0.919995 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.497 mas, bpa=36.28 degrees ! Estimated noise=0.380672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838951 Jy ! Component: 100 - total flux cleaned = 0.00109067 Jy ! Component: 150 - total flux cleaned = 0.00125773 Jy ! Component: 200 - total flux cleaned = 0.00142221 Jy ! Total flux subtracted in 200 components = 0.00142221 Jy ! Clean residual min=-0.001430 max=0.001449 Jy/beam ! Clean residual mean=0.000004 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.157033 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.157033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052856Jy sigma=0.919604 ! Fit after self-cal, rms=0.052862Jy sigma=0.919552 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.6, 34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141859 Jy ! Component: 100 - total flux cleaned = 0.00212732 Jy ! Component: 150 - total flux cleaned = 0.00225243 Jy ! Component: 200 - total flux cleaned = 0.00236309 Jy ! Total flux subtracted in 200 components = 0.00236309 Jy ! Clean residual min=-0.001302 max=0.001297 Jy/beam ! Clean residual mean=0.000005 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.159396 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 138 components and 0.159396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052813Jy sigma=0.918739 ! Fit after self-cal, rms=0.052812Jy sigma=0.918691 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052812Jy sigma=0.918691 ! Fit after self-cal, rms=0.052894Jy sigma=0.918614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.496 mas, bpa=36.21 degrees ! Estimated noise=0.380681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597539 Jy ! Component: 100 - total flux cleaned = 0.000856037 Jy ! Component: 150 - total flux cleaned = 0.000993629 Jy ! Component: 200 - total flux cleaned = 0.00114028 Jy ! Total flux subtracted in 200 components = 0.00114028 Jy ! Clean residual min=-0.001301 max=0.001323 Jy/beam ! Clean residual mean=0.000004 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.160537 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 0.160537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052877Jy sigma=0.918349 ! Fit after self-cal, rms=0.052878Jy sigma=0.918340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205472 Jy ! Component: 100 - total flux cleaned = 0.000291246 Jy ! Component: 150 - total flux cleaned = 0.000357311 Jy ! Component: 200 - total flux cleaned = 0.000437485 Jy ! Total flux subtracted in 200 components = 0.000437485 Jy ! Clean residual min=-0.001302 max=0.001317 Jy/beam ! Clean residual mean=0.000004 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.160974 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 152 components and 0.160974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052867Jy sigma=0.918176 ! Fit after self-cal, rms=0.052867Jy sigma=0.918174 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052867Jy sigma=0.918174 ! Fit after self-cal, rms=0.052911Jy sigma=0.918140 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=2.859 mas, bpa=36.02 degrees ! Estimated noise=0.474737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537679 Jy ! Component: 100 - total flux cleaned = 0.000839438 Jy ! Component: 150 - total flux cleaned = 0.00104376 Jy ! Component: 200 - total flux cleaned = 0.00121415 Jy ! Total flux subtracted in 200 components = 0.00121415 Jy ! Clean residual min=-0.001294 max=0.001645 Jy/beam ! Clean residual mean=0.000008 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.162188 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 165 components and 0.162188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052906Jy sigma=0.918099 ! Fit after self-cal, rms=0.052906Jy sigma=0.918089 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122842 Jy ! Component: 100 - total flux cleaned = 0.000248571 Jy ! Component: 150 - total flux cleaned = 0.000342241 Jy ! Component: 200 - total flux cleaned = 0.000388769 Jy ! Total flux subtracted in 200 components = 0.000388769 Jy ! Clean residual min=-0.001291 max=0.001636 Jy/beam ! Clean residual mean=0.000008 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.162577 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 179 components and 0.162577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052904Jy sigma=0.918077 ! Fit after self-cal, rms=0.052904Jy sigma=0.918071 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.496 mas, bpa=36.18 degrees ! Estimated noise=0.380798 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 1.496 at 36.18 degrees (North through East) ! Clean map min=-0.0012416 max=0.097608 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7367 mas, bmaj=1.134 mas, bpa=36 degrees ! Estimated noise=0.693764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673546 Jy ! Component: 100 - total flux cleaned = 0.0910596 Jy ! Component: 150 - total flux cleaned = 0.105096 Jy ! Component: 200 - total flux cleaned = 0.114472 Jy ! Total flux subtracted in 200 components = 0.114472 Jy ! Clean residual min=-0.003315 max=0.005168 Jy/beam ! Clean residual mean=-0.000002 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.114472 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.114472 Jy ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.496 mas, bpa=36.18 degrees ! Estimated noise=0.380798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107025 Jy ! Component: 100 - total flux cleaned = 0.0178966 Jy ! Component: 150 - total flux cleaned = 0.0230802 Jy ! Component: 200 - total flux cleaned = 0.0269497 Jy ! Total flux subtracted in 200 components = 0.0269497 Jy ! Clean residual min=-0.001747 max=0.002422 Jy/beam ! Clean residual mean=0.000005 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.141422 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 52 components and 0.141422 Jy ! Inverting map ! Added new window around map position (-11.6, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307831 Jy ! Component: 100 - total flux cleaned = 0.00556274 Jy ! Component: 150 - total flux cleaned = 0.00763741 Jy ! Component: 200 - total flux cleaned = 0.00940461 Jy ! Total flux subtracted in 200 components = 0.00940461 Jy ! Clean residual min=-0.001499 max=0.001590 Jy/beam ! Clean residual mean=0.000005 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.150826 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 86 components and 0.150826 Jy ! Inverting map ! Added new window around map position (30.2, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166671 Jy ! Component: 100 - total flux cleaned = 0.00304458 Jy ! Component: 150 - total flux cleaned = 0.00425621 Jy ! Component: 200 - total flux cleaned = 0.00516604 Jy ! Total flux subtracted in 200 components = 0.00516604 Jy ! Clean residual min=-0.001380 max=0.001386 Jy/beam ! Clean residual mean=0.000005 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.155992 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 110 components and 0.155992 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=2.859 mas, bpa=36.02 degrees ! Estimated noise=0.474737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147859 Jy ! Component: 100 - total flux cleaned = 0.002559 Jy ! Component: 150 - total flux cleaned = 0.00344004 Jy ! Component: 200 - total flux cleaned = 0.00417338 Jy ! Total flux subtracted in 200 components = 0.00417338 Jy ! Clean residual min=-0.001303 max=0.001592 Jy/beam ! Clean residual mean=0.000009 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.160166 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618727 Jy ! Component: 100 - total flux cleaned = 0.000983728 Jy ! Component: 150 - total flux cleaned = 0.00123467 Jy ! Component: 200 - total flux cleaned = 0.00142875 Jy ! Total flux subtracted in 200 components = 0.00142875 Jy ! Clean residual min=-0.001256 max=0.001546 Jy/beam ! Clean residual mean=0.000008 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.161594 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 170 components and 0.161594 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.496 mas, bpa=36.18 degrees ! Estimated noise=0.380798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217697 Jy ! Component: 100 - total flux cleaned = -0.000162656 Jy ! Component: 150 - total flux cleaned = -6.05938e-05 Jy ! Component: 200 - total flux cleaned = 5.98055e-05 Jy ! Total flux subtracted in 200 components = 5.98055e-05 Jy ! Clean residual min=-0.001358 max=0.001338 Jy/beam ! Clean residual mean=0.000004 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.161654 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 184 components and 0.161654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052891Jy sigma=0.917977 ! Fit after self-cal, rms=0.052879Jy sigma=0.917817 wmodel J1107+7232_X_map.mod ! Writing 184 model components to file: J1107+7232_X_map.mod wobs J1107+7232_X_uvs.fits ! Writing UV FITS file: J1107+7232_X_uvs.fits wwins J1107+7232_X_map.win ! wwins: Wrote 7 windows to J1107+7232_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119347 Jy ! Component: 100 - total flux cleaned = -7.38949e-05 Jy ! Component: 150 - total flux cleaned = -2.97762e-05 Jy ! Component: 200 - total flux cleaned = -8.17424e-06 Jy ! Component: 250 - total flux cleaned = 7.54303e-05 Jy ! Component: 300 - total flux cleaned = 0.000198623 Jy ! Component: 350 - total flux cleaned = 0.000259235 Jy ! Component: 400 - total flux cleaned = 0.000338999 Jy ! Component: 450 - total flux cleaned = 0.000456071 Jy ! Component: 500 - total flux cleaned = 0.000532645 Jy ! Component: 550 - total flux cleaned = 0.000627419 Jy ! Component: 600 - total flux cleaned = 0.000702471 Jy ! Component: 650 - total flux cleaned = 0.000758157 Jy ! Component: 700 - total flux cleaned = 0.000795134 Jy ! Component: 750 - total flux cleaned = 0.000940553 Jy ! Component: 800 - total flux cleaned = 0.000976481 Jy ! Component: 850 - total flux cleaned = 0.00108331 Jy ! Component: 900 - total flux cleaned = 0.00104782 Jy ! Component: 950 - total flux cleaned = 0.00110025 Jy ! Component: 1000 - total flux cleaned = 0.00111765 Jy ! Component: 1050 - total flux cleaned = 0.0011524 Jy ! Component: 1100 - total flux cleaned = 0.00125502 Jy ! Component: 1150 - total flux cleaned = 0.00123802 Jy ! Component: 1200 - total flux cleaned = 0.00135615 Jy ! Component: 1250 - total flux cleaned = 0.00135613 Jy ! Component: 1300 - total flux cleaned = 0.00135628 Jy ! Component: 1350 - total flux cleaned = 0.00145554 Jy ! Component: 1400 - total flux cleaned = 0.00143901 Jy ! Component: 1450 - total flux cleaned = 0.00152081 Jy ! Component: 1500 - total flux cleaned = 0.00155351 Jy ! Component: 1550 - total flux cleaned = 0.00158603 Jy ! Component: 1600 - total flux cleaned = 0.00168233 Jy ! Component: 1650 - total flux cleaned = 0.00165045 Jy ! Component: 1700 - total flux cleaned = 0.00177761 Jy ! Component: 1750 - total flux cleaned = 0.00179318 Jy ! Component: 1800 - total flux cleaned = 0.00184024 Jy ! Component: 1850 - total flux cleaned = 0.00179334 Jy ! Component: 1900 - total flux cleaned = 0.00182455 Jy ! Component: 1950 - total flux cleaned = 0.00184006 Jy ! Component: 2000 - total flux cleaned = 0.00188631 Jy ! Component: 2050 - total flux cleaned = 0.00187107 Jy ! Component: 2100 - total flux cleaned = 0.00196247 Jy ! Component: 2150 - total flux cleaned = 0.00200788 Jy ! Component: 2200 - total flux cleaned = 0.00197763 Jy ! Component: 2250 - total flux cleaned = 0.00206771 Jy ! Component: 2300 - total flux cleaned = 0.00202277 Jy ! Component: 2350 - total flux cleaned = 0.00212693 Jy ! Component: 2400 - total flux cleaned = 0.00205281 Jy ! Component: 2450 - total flux cleaned = 0.00208237 Jy ! Component: 2500 - total flux cleaned = 0.00211174 Jy ! Component: 2550 - total flux cleaned = 0.00212641 Jy ! Component: 2600 - total flux cleaned = 0.00215546 Jy ! Component: 2650 - total flux cleaned = 0.00214094 Jy ! Component: 2700 - total flux cleaned = 0.00222742 Jy ! Component: 2750 - total flux cleaned = 0.00219875 Jy ! Component: 2800 - total flux cleaned = 0.00225592 Jy ! Component: 2850 - total flux cleaned = 0.00228437 Jy ! Component: 2900 - total flux cleaned = 0.0023125 Jy ! Component: 2950 - total flux cleaned = 0.00236895 Jy ! Component: 3000 - total flux cleaned = 0.00229867 Jy ! Component: 3050 - total flux cleaned = 0.00234066 Jy ! Component: 3100 - total flux cleaned = 0.0023546 Jy ! Component: 3150 - total flux cleaned = 0.00235461 Jy ! Component: 3200 - total flux cleaned = 0.00235458 Jy ! Component: 3250 - total flux cleaned = 0.00235453 Jy ! Component: 3300 - total flux cleaned = 0.00232718 Jy ! Component: 3350 - total flux cleaned = 0.00234082 Jy ! Component: 3400 - total flux cleaned = 0.0024225 Jy ! Component: 3450 - total flux cleaned = 0.00240882 Jy ! Component: 3500 - total flux cleaned = 0.00236832 Jy ! Component: 3550 - total flux cleaned = 0.00239525 Jy ! Component: 3600 - total flux cleaned = 0.00238188 Jy ! Component: 3650 - total flux cleaned = 0.0024219 Jy ! Component: 3700 - total flux cleaned = 0.00235539 Jy ! Component: 3750 - total flux cleaned = 0.00232885 Jy ! Component: 3800 - total flux cleaned = 0.00232884 Jy ! Component: 3850 - total flux cleaned = 0.00235523 Jy ! Component: 3900 - total flux cleaned = 0.00231588 Jy ! Component: 3950 - total flux cleaned = 0.00227671 Jy ! Component: 4000 - total flux cleaned = 0.00230263 Jy ! Component: 4050 - total flux cleaned = 0.00225071 Jy ! Total flux subtracted in 4096 components = 0.00230246 Jy ! Clean residual min=-0.000895 max=0.000752 Jy/beam ! Clean residual mean=0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.163957 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 522 components and 0.163956 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J1107+7232_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 1.496 at 36.18 degrees (North through East) ! Clean map min=-0.00099198 max=0.097651 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1107+7232_X_map.fits wmodel /scr/pima/rv119_uvs/J1107+7232_X_map.mod ! Writing 522 model components to file: /scr/pima/rv119_uvs/J1107+7232_X_map.mod wobs /scr/pima/rv119_uvs/J1107+7232_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J1107+7232_X_uvs.fits wwins /scr/pima/rv119_uvs/J1107+7232_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv119_uvs/J1107+7232_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0976512 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021953 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.674432 0.674432 1.34886 2.69773 5.39546 10.7909 21.5818 43.1636 86.3273 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 444.818 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J1107+7232_X_dfm.log closed on Sun Dec 17 11:35:29 2017