! Started logfile: /scr/pima/rv119_uvs/J1107+7232_S_dfm.log on Sun Dec 17 11:36:12 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv119_uvs/J1107+7232_S_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J1107+7232_S_uva.fits ! AN table 1: 66 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847138 visibilities/baseline/integration-bin. ! Found source: J1107+7232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 10064 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1107+7232_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.024712Jy sigma=18.824106 ! Fit after self-cal, rms=0.851815Jy sigma=15.822031 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=4.295 mas, bpa=35.04 degrees ! Estimated noise=0.724875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110518 Jy ! Component: 100 - total flux cleaned = 0.14112 Jy ! Total flux subtracted in 100 components = 0.14112 Jy ! Clean residual min=-0.014586 max=0.064654 Jy/beam ! Clean residual mean=-0.000016 rms=0.003884 Jy/beam ! Combined flux in latest and established models = 0.14112 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.14112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130892Jy sigma=2.114575 ! Fit after self-cal, rms=0.130290Jy sigma=2.103246 ! Inverting map ! Added new window around map position (-12, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524831 Jy ! Component: 100 - total flux cleaned = 0.073008 Jy ! Total flux subtracted in 100 components = 0.073008 Jy ! Clean residual min=-0.008754 max=0.012219 Jy/beam ! Clean residual mean=-0.000009 rms=0.002254 Jy/beam ! Combined flux in latest and established models = 0.214128 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.214128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103729Jy sigma=1.506235 ! Fit after self-cal, rms=0.099548Jy sigma=1.421128 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193732 Jy ! Component: 100 - total flux cleaned = 0.0310453 Jy ! Total flux subtracted in 100 components = 0.0310453 Jy ! Clean residual min=-0.006651 max=0.010998 Jy/beam ! Clean residual mean=-0.000008 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.245174 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.245174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093230Jy sigma=1.277599 ! Fit after self-cal, rms=0.092877Jy sigma=1.270868 ! Inverting map ! Added new window around map position (-3.5, 5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122863 Jy ! Component: 100 - total flux cleaned = 0.0206128 Jy ! Total flux subtracted in 100 components = 0.0206128 Jy ! Clean residual min=-0.005976 max=0.005756 Jy/beam ! Clean residual mean=-0.000006 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.265786 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.265786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089813Jy sigma=1.201136 ! Fit after self-cal, rms=0.089710Jy sigma=1.199313 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=5.452 mas, bpa=34.64 degrees ! Estimated noise=0.40807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113557 Jy ! Component: 100 - total flux cleaned = 0.0182413 Jy ! Component: 150 - total flux cleaned = 0.0227846 Jy ! Component: 200 - total flux cleaned = 0.0259381 Jy ! Total flux subtracted in 200 components = 0.0259381 Jy ! Clean residual min=-0.004251 max=0.004053 Jy/beam ! Clean residual mean=0.000001 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.291724 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 57 components and 0.291724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087838Jy sigma=1.161404 ! Fit after self-cal, rms=0.087726Jy sigma=1.159250 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.605 x 5.452 at 34.64 degrees (North through East) ! Clean map min=-0.0039484 max=0.14163 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.01 KP 1.00 ! LA 0.98 MK 1.03 NL 1.00 OV 0.98 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.99 KP 1.01 ! LA 0.99 MK 1.03 NL 1.02 OV 1.00 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.03 KP 0.72 ! LA 1.02 MK 0.91 NL 1.00* OV 1.07 ! PT 1.01 SC 0.61 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.02 KP 1.03 ! LA 1.03 MK 1.05 NL 1.02 OV 1.01 ! PT 1.02 SC 1.11 ! ! ! Fit before self-cal, rms=0.087726Jy sigma=1.159250 ! Fit after self-cal, rms=0.069371Jy sigma=1.108551 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=5.493 mas, bpa=34.88 degrees ! Estimated noise=0.404097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360266 Jy ! Component: 100 - total flux cleaned = 0.000124282 Jy ! Component: 150 - total flux cleaned = 0.00059418 Jy ! Component: 200 - total flux cleaned = 0.000880174 Jy ! Total flux subtracted in 200 components = 0.000880174 Jy ! Clean residual min=-0.002833 max=0.002827 Jy/beam ! Clean residual mean=0.000009 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.292605 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.292605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069185Jy sigma=1.104674 ! Fit after self-cal, rms=0.069211Jy sigma=1.103191 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069211Jy sigma=1.103191 ! Fit after self-cal, rms=0.067890Jy sigma=1.066513 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=5.42 mas, bpa=35.89 degrees ! Estimated noise=0.400224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515932 Jy ! Component: 100 - total flux cleaned = 0.00051842 Jy ! Component: 150 - total flux cleaned = 0.000443922 Jy ! Component: 200 - total flux cleaned = 0.000344407 Jy ! Total flux subtracted in 200 components = 0.000344407 Jy ! Clean residual min=-0.001944 max=0.001856 Jy/beam ! Clean residual mean=0.000006 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.292949 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.292949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067836Jy sigma=1.065411 ! Fit after self-cal, rms=0.068006Jy sigma=1.064677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.97564e-05 Jy ! Component: 100 - total flux cleaned = 2.04695e-05 Jy ! Component: 150 - total flux cleaned = -6.00199e-05 Jy ! Component: 200 - total flux cleaned = -8.37611e-05 Jy ! Total flux subtracted in 200 components = -8.37611e-05 Jy ! Clean residual min=-0.001919 max=0.001814 Jy/beam ! Clean residual mean=0.000006 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.292865 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.292865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067982Jy sigma=1.064218 ! Fit after self-cal, rms=0.067984Jy sigma=1.064192 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067984Jy sigma=1.064192 ! Fit after self-cal, rms=0.068222Jy sigma=1.064061 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=5.426 mas, bpa=35.77 degrees ! Estimated noise=0.400131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.28387e-05 Jy ! Component: 100 - total flux cleaned = 6.30549e-05 Jy ! Component: 150 - total flux cleaned = 3.85549e-05 Jy ! Component: 200 - total flux cleaned = -5.53063e-06 Jy ! Total flux subtracted in 200 components = -5.53063e-06 Jy ! Clean residual min=-0.001872 max=0.001802 Jy/beam ! Clean residual mean=0.000006 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.29286 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.29286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068204Jy sigma=1.063732 ! Fit after self-cal, rms=0.068216Jy sigma=1.063717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79425e-05 Jy ! Component: 100 - total flux cleaned = 8.34593e-06 Jy ! Component: 150 - total flux cleaned = -2.91415e-05 Jy ! Component: 200 - total flux cleaned = -6.43698e-05 Jy ! Total flux subtracted in 200 components = -6.43698e-05 Jy ! Clean residual min=-0.001856 max=0.001797 Jy/beam ! Clean residual mean=0.000006 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.292795 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.292795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068205Jy sigma=1.063526 ! Fit after self-cal, rms=0.068206Jy sigma=1.063517 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068206Jy sigma=1.063517 ! Fit after self-cal, rms=0.068227Jy sigma=1.063443 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=10.17 mas, bpa=36.67 degrees ! Estimated noise=0.521385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.47551e-06 Jy ! Component: 100 - total flux cleaned = -1.12886e-05 Jy ! Component: 150 - total flux cleaned = -2.35277e-05 Jy ! Component: 200 - total flux cleaned = -4.60467e-05 Jy ! Total flux subtracted in 200 components = -4.60467e-05 Jy ! Clean residual min=-0.001848 max=0.001933 Jy/beam ! Clean residual mean=0.000015 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.292749 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 103 components and 0.292749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068223Jy sigma=1.063395 ! Fit after self-cal, rms=0.068225Jy sigma=1.063387 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.75282e-05 Jy ! Component: 100 - total flux cleaned = -5.77171e-05 Jy ! Component: 150 - total flux cleaned = -7.76944e-05 Jy ! Component: 200 - total flux cleaned = -8.67477e-05 Jy ! Total flux subtracted in 200 components = -8.67477e-05 Jy ! Clean residual min=-0.001834 max=0.001941 Jy/beam ! Clean residual mean=0.000015 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.292663 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.292663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068223Jy sigma=1.063381 ! Fit after self-cal, rms=0.068224Jy sigma=1.063376 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=5.431 mas, bpa=35.63 degrees ! Estimated noise=0.400172 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.541 x 5.431 at 35.63 degrees (North through East) ! Clean map min=-0.0016842 max=0.13866 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=4.297 mas, bpa=35.87 degrees ! Estimated noise=0.705442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117877 Jy ! Component: 100 - total flux cleaned = 0.170228 Jy ! Component: 150 - total flux cleaned = 0.198782 Jy ! Component: 200 - total flux cleaned = 0.218537 Jy ! Total flux subtracted in 200 components = 0.218537 Jy ! Clean residual min=-0.004850 max=0.011219 Jy/beam ! Clean residual mean=-0.000008 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.218537 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.218537 Jy ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=5.431 mas, bpa=35.63 degrees ! Estimated noise=0.400172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238155 Jy ! Component: 100 - total flux cleaned = 0.0391324 Jy ! Component: 150 - total flux cleaned = 0.049412 Jy ! Component: 200 - total flux cleaned = 0.0566049 Jy ! Total flux subtracted in 200 components = 0.0566049 Jy ! Clean residual min=-0.002513 max=0.004649 Jy/beam ! Clean residual mean=-0.000002 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.275142 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 59 components and 0.275142 Jy ! Inverting map ! Added new window around map position (-6, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524743 Jy ! Component: 100 - total flux cleaned = 0.00898523 Jy ! Component: 150 - total flux cleaned = 0.0117302 Jy ! Component: 200 - total flux cleaned = 0.0137696 Jy ! Total flux subtracted in 200 components = 0.0137696 Jy ! Clean residual min=-0.001827 max=0.001853 Jy/beam ! Clean residual mean=0.000004 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.288912 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 91 components and 0.288912 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=10.17 mas, bpa=36.67 degrees ! Estimated noise=0.521385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220546 Jy ! Component: 100 - total flux cleaned = 0.00284533 Jy ! Component: 150 - total flux cleaned = 0.0030144 Jy ! Component: 200 - total flux cleaned = 0.00304225 Jy ! Total flux subtracted in 200 components = 0.00304225 Jy ! Clean residual min=-0.001820 max=0.001911 Jy/beam ! Clean residual mean=0.000014 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.291954 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.49783e-05 Jy ! Component: 100 - total flux cleaned = 4.67916e-05 Jy ! Component: 150 - total flux cleaned = 6.5367e-05 Jy ! Component: 200 - total flux cleaned = 8.21099e-05 Jy ! Total flux subtracted in 200 components = 8.21099e-05 Jy ! Clean residual min=-0.001730 max=0.001955 Jy/beam ! Clean residual mean=0.000014 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.292036 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 136 components and 0.292036 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=5.431 mas, bpa=35.63 degrees ! Estimated noise=0.400172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.24334e-05 Jy ! Component: 100 - total flux cleaned = -8.9932e-06 Jy ! Component: 150 - total flux cleaned = -9.31205e-05 Jy ! Component: 200 - total flux cleaned = -0.000119779 Jy ! Total flux subtracted in 200 components = -0.000119779 Jy ! Clean residual min=-0.001760 max=0.001699 Jy/beam ! Clean residual mean=0.000005 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.291916 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 151 components and 0.291916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068231Jy sigma=1.063249 ! Fit after self-cal, rms=0.068213Jy sigma=1.063063 wmodel J1107+7232_S_map.mod ! Writing 151 model components to file: J1107+7232_S_map.mod wobs J1107+7232_S_uvs.fits ! Writing UV FITS file: J1107+7232_S_uvs.fits wwins J1107+7232_S_map.win ! wwins: Wrote 4 windows to J1107+7232_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168113 Jy ! Component: 100 - total flux cleaned = -0.000167626 Jy ! Component: 150 - total flux cleaned = -0.000254789 Jy ! Component: 200 - total flux cleaned = -0.000368553 Jy ! Component: 250 - total flux cleaned = -0.000451284 Jy ! Component: 300 - total flux cleaned = -0.000505451 Jy ! Component: 350 - total flux cleaned = -0.000611342 Jy ! Component: 400 - total flux cleaned = -0.000663706 Jy ! Component: 450 - total flux cleaned = -0.000714813 Jy ! Component: 500 - total flux cleaned = -0.000665439 Jy ! Component: 550 - total flux cleaned = -0.000641388 Jy ! Component: 600 - total flux cleaned = -0.000641369 Jy ! Component: 650 - total flux cleaned = -0.000688596 Jy ! Component: 700 - total flux cleaned = -0.000641318 Jy ! Component: 750 - total flux cleaned = -0.00064135 Jy ! Component: 800 - total flux cleaned = -0.000687006 Jy ! Component: 850 - total flux cleaned = -0.0006871 Jy ! Component: 900 - total flux cleaned = -0.000799303 Jy ! Component: 950 - total flux cleaned = -0.000843355 Jy ! Component: 1000 - total flux cleaned = -0.000930748 Jy ! Component: 1050 - total flux cleaned = -0.000952772 Jy ! Component: 1100 - total flux cleaned = -0.00110319 Jy ! Component: 1150 - total flux cleaned = -0.00114576 Jy ! Component: 1200 - total flux cleaned = -0.00125114 Jy ! Component: 1250 - total flux cleaned = -0.00129298 Jy ! Component: 1300 - total flux cleaned = -0.00141715 Jy ! Component: 1350 - total flux cleaned = -0.00147863 Jy ! Component: 1400 - total flux cleaned = -0.0015397 Jy ! Component: 1450 - total flux cleaned = -0.00160019 Jy ! Component: 1500 - total flux cleaned = -0.00158037 Jy ! Component: 1550 - total flux cleaned = -0.00165984 Jy ! Component: 1600 - total flux cleaned = -0.00158105 Jy ! Component: 1650 - total flux cleaned = -0.00167898 Jy ! Component: 1700 - total flux cleaned = -0.0016594 Jy ! Component: 1750 - total flux cleaned = -0.00162051 Jy ! Component: 1800 - total flux cleaned = -0.00163984 Jy ! Component: 1850 - total flux cleaned = -0.00169711 Jy ! Component: 1900 - total flux cleaned = -0.00167834 Jy ! Component: 1950 - total flux cleaned = -0.0016409 Jy ! Component: 2000 - total flux cleaned = -0.00171576 Jy ! Component: 2050 - total flux cleaned = -0.00177145 Jy ! Component: 2100 - total flux cleaned = -0.00177142 Jy ! Component: 2150 - total flux cleaned = -0.00178963 Jy ! Component: 2200 - total flux cleaned = -0.00175341 Jy ! Component: 2250 - total flux cleaned = -0.00175348 Jy ! Component: 2300 - total flux cleaned = -0.00175352 Jy ! Component: 2350 - total flux cleaned = -0.00173574 Jy ! Component: 2400 - total flux cleaned = -0.00171797 Jy ! Component: 2450 - total flux cleaned = -0.00178836 Jy ! Component: 2500 - total flux cleaned = -0.0017358 Jy ! Component: 2550 - total flux cleaned = -0.00171838 Jy ! Component: 2600 - total flux cleaned = -0.0017357 Jy ! Component: 2650 - total flux cleaned = -0.00176998 Jy ! Component: 2700 - total flux cleaned = -0.00168445 Jy ! Component: 2750 - total flux cleaned = -0.00175264 Jy ! Component: 2800 - total flux cleaned = -0.00171882 Jy ! Component: 2850 - total flux cleaned = -0.00178626 Jy ! Component: 2900 - total flux cleaned = -0.00180296 Jy ! Component: 2950 - total flux cleaned = -0.0018029 Jy ! Component: 3000 - total flux cleaned = -0.00178625 Jy ! Component: 3050 - total flux cleaned = -0.00175316 Jy ! Component: 3100 - total flux cleaned = -0.00178601 Jy ! Component: 3150 - total flux cleaned = -0.00176976 Jy ! Component: 3200 - total flux cleaned = -0.00176978 Jy ! Component: 3250 - total flux cleaned = -0.001786 Jy ! Component: 3300 - total flux cleaned = -0.00178612 Jy ! Component: 3350 - total flux cleaned = -0.00173822 Jy ! Component: 3400 - total flux cleaned = -0.00173827 Jy ! Component: 3450 - total flux cleaned = -0.00173834 Jy ! Component: 3500 - total flux cleaned = -0.00178557 Jy ! Component: 3550 - total flux cleaned = -0.00167578 Jy ! Component: 3600 - total flux cleaned = -0.00164458 Jy ! Component: 3650 - total flux cleaned = -0.00166016 Jy ! Component: 3700 - total flux cleaned = -0.00164482 Jy ! Component: 3750 - total flux cleaned = -0.00162935 Jy ! Component: 3800 - total flux cleaned = -0.00156796 Jy ! Component: 3850 - total flux cleaned = -0.00153748 Jy ! Component: 3900 - total flux cleaned = -0.00150709 Jy ! Component: 3950 - total flux cleaned = -0.00146171 Jy ! Component: 4000 - total flux cleaned = -0.00144651 Jy ! Component: 4050 - total flux cleaned = -0.00140141 Jy ! Total flux subtracted in 4096 components = -0.0013864 Jy ! Clean residual min=-0.000918 max=0.000985 Jy/beam ! Clean residual mean=0.000005 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.29053 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 462 components and 0.29053 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J1107+7232_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.541 x 5.431 at 35.63 degrees (North through East) ! Clean map min=-0.0015675 max=0.139 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1107+7232_S_map.fits wmodel /scr/pima/rv119_uvs/J1107+7232_S_map.mod ! Writing 462 model components to file: /scr/pima/rv119_uvs/J1107+7232_S_map.mod wobs /scr/pima/rv119_uvs/J1107+7232_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J1107+7232_S_uvs.fits wwins /scr/pima/rv119_uvs/J1107+7232_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv119_uvs/J1107+7232_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.138998 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276148 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.596011 0.596011 1.19202 2.38404 4.76809 9.53618 19.0724 38.1447 76.2894 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.138 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 503.346 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J1107+7232_S_dfm.log closed on Sun Dec 17 11:36:16 2017