! Started logfile: /scr/pima/rv119_uvs/J1033+071A_X_dfm.log on Sun Dec 17 11:35:04 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv119_uvs/J1033+071A_X_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J1033+071A_X_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.384588 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1033+071A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4292 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1033+071A_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 285 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 285 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 285 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 285 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.037891Jy sigma=18.461511 ! Fit after self-cal, rms=0.729664Jy sigma=12.951368 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8628 mas, bmaj=1.884 mas, bpa=-8.771 degrees ! Estimated noise=0.932314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205267 Jy ! Component: 100 - total flux cleaned = 0.256513 Jy ! Total flux subtracted in 100 components = 0.256513 Jy ! Clean residual min=-0.007388 max=0.020022 Jy/beam ! Clean residual mean=0.000014 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.256513 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.256513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072622Jy sigma=1.194893 ! Fit after self-cal, rms=0.072611Jy sigma=1.194716 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199216 Jy ! Component: 100 - total flux cleaned = 0.027997 Jy ! Total flux subtracted in 100 components = 0.027997 Jy ! Clean residual min=-0.005922 max=0.008606 Jy/beam ! Clean residual mean=0.000006 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.28451 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.28451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066640Jy sigma=1.070779 ! Fit after self-cal, rms=0.066636Jy sigma=1.070643 ! Inverting map ! Added new window around map position (2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817321 Jy ! Component: 100 - total flux cleaned = 0.0111192 Jy ! Total flux subtracted in 100 components = 0.0111192 Jy ! Clean residual min=-0.005342 max=0.005613 Jy/beam ! Clean residual mean=0.000003 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.29563 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.29563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065660Jy sigma=1.051030 ! Fit after self-cal, rms=0.065499Jy sigma=1.047814 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.138 mas, bmaj=2.185 mas, bpa=-10.14 degrees ! Estimated noise=0.657062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423364 Jy ! Component: 100 - total flux cleaned = 0.00553929 Jy ! Component: 150 - total flux cleaned = 0.00590491 Jy ! Component: 200 - total flux cleaned = 0.00608648 Jy ! Total flux subtracted in 200 components = 0.00608648 Jy ! Clean residual min=-0.003808 max=0.003815 Jy/beam ! Clean residual mean=-0.000005 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.301716 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.301716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065214Jy sigma=1.041780 ! Fit after self-cal, rms=0.065178Jy sigma=1.041139 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.138 x 2.185 at -10.14 degrees (North through East) ! Clean map min=-0.0037359 max=0.26701 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.03 KP 0.98 ! LA 0.99 MK 1.02 NL 1.03 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 0.97 ! LA 0.99 MK 1.01 NL 1.07 OV 0.97 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 KP 0.97 ! LA 1.00 MK 0.98 NL 1.07 OV 0.97 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.98 KP 0.97 ! LA 0.99 MK 0.97 NL 1.03 OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.065178Jy sigma=1.041139 ! Fit after self-cal, rms=0.063670Jy sigma=1.033267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.126 mas, bmaj=2.211 mas, bpa=-9.497 degrees ! Estimated noise=0.659308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149675 Jy ! Component: 100 - total flux cleaned = -0.00166907 Jy ! Component: 150 - total flux cleaned = -0.00174468 Jy ! Component: 200 - total flux cleaned = -0.00184826 Jy ! Total flux subtracted in 200 components = -0.00184826 Jy ! Clean residual min=-0.003201 max=0.003652 Jy/beam ! Clean residual mean=-0.000002 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.299868 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.299868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063608Jy sigma=1.032335 ! Fit after self-cal, rms=0.063604Jy sigma=1.032245 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063604Jy sigma=1.032245 ! Fit after self-cal, rms=0.062579Jy sigma=1.012796 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=2.214 mas, bpa=-9.468 degrees ! Estimated noise=0.659379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.93002e-05 Jy ! Component: 100 - total flux cleaned = 3.99589e-06 Jy ! Component: 150 - total flux cleaned = -2.8786e-05 Jy ! Component: 200 - total flux cleaned = -2.82158e-05 Jy ! Total flux subtracted in 200 components = -2.82158e-05 Jy ! Clean residual min=-0.002868 max=0.003118 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.29984 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.29984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062519Jy sigma=1.012074 ! Fit after self-cal, rms=0.062530Jy sigma=1.011918 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-33.4, 49.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212444 Jy ! Component: 100 - total flux cleaned = 0.00185758 Jy ! Component: 150 - total flux cleaned = 0.001695 Jy ! Component: 200 - total flux cleaned = 0.00164309 Jy ! Total flux subtracted in 200 components = 0.00164309 Jy ! Clean residual min=-0.002989 max=0.002874 Jy/beam ! Clean residual mean=0.000000 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.301483 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.301483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062378Jy sigma=1.009062 ! Fit after self-cal, rms=0.062371Jy sigma=1.008859 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062371Jy sigma=1.008859 ! Fit after self-cal, rms=0.062324Jy sigma=1.007390 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=2.214 mas, bpa=-9.43 degrees ! Estimated noise=0.659613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047097 Jy ! Component: 100 - total flux cleaned = 0.000470595 Jy ! Component: 150 - total flux cleaned = 0.000394823 Jy ! Component: 200 - total flux cleaned = 0.00036164 Jy ! Total flux subtracted in 200 components = 0.00036164 Jy ! Clean residual min=-0.002815 max=0.002701 Jy/beam ! Clean residual mean=-0.000000 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.301844 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.301844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062271Jy sigma=1.006505 ! Fit after self-cal, rms=0.062271Jy sigma=1.006459 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.96533e-05 Jy ! Component: 100 - total flux cleaned = -0.000162867 Jy ! Component: 150 - total flux cleaned = -0.000220676 Jy ! Component: 200 - total flux cleaned = -0.000248374 Jy ! Total flux subtracted in 200 components = -0.000248374 Jy ! Clean residual min=-0.002787 max=0.002605 Jy/beam ! Clean residual mean=-0.000000 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.301596 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.301596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062243Jy sigma=1.006030 ! Fit after self-cal, rms=0.062243Jy sigma=1.006016 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062243Jy sigma=1.006016 ! Fit after self-cal, rms=0.062251Jy sigma=1.005942 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=3.14 mas, bpa=0.3143 degrees ! Estimated noise=0.767833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.83615e-05 Jy ! Component: 100 - total flux cleaned = -2.62321e-05 Jy ! Component: 150 - total flux cleaned = -4.89154e-05 Jy ! Component: 200 - total flux cleaned = -2.79288e-05 Jy ! Total flux subtracted in 200 components = -2.79288e-05 Jy ! Clean residual min=-0.002704 max=0.003359 Jy/beam ! Clean residual mean=-0.000000 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.301568 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.301568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062239Jy sigma=1.005769 ! Fit after self-cal, rms=0.062240Jy sigma=1.005745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.46114e-05 Jy ! Component: 100 - total flux cleaned = -6.48802e-05 Jy ! Component: 150 - total flux cleaned = -8.35197e-05 Jy ! Component: 200 - total flux cleaned = -0.000100414 Jy ! Total flux subtracted in 200 components = -0.000100414 Jy ! Clean residual min=-0.002701 max=0.003284 Jy/beam ! Clean residual mean=0.000000 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.301468 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.301468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062233Jy sigma=1.005667 ! Fit after self-cal, rms=0.062233Jy sigma=1.005657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=2.213 mas, bpa=-9.412 degrees ! Estimated noise=0.659802 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.125 x 2.213 at -9.412 degrees (North through East) ! Clean map min=-0.0025627 max=0.26588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8523 mas, bmaj=1.931 mas, bpa=-8.115 degrees ! Estimated noise=0.932417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204119 Jy ! Component: 100 - total flux cleaned = 0.255446 Jy ! Component: 150 - total flux cleaned = 0.27591 Jy ! Component: 200 - total flux cleaned = 0.286664 Jy ! Total flux subtracted in 200 components = 0.286664 Jy ! Clean residual min=-0.004792 max=0.005373 Jy/beam ! Clean residual mean=0.000006 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.286664 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.286664 Jy ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=2.213 mas, bpa=-9.412 degrees ! Estimated noise=0.659802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775167 Jy ! Component: 100 - total flux cleaned = 0.0122941 Jy ! Component: 150 - total flux cleaned = 0.0151582 Jy ! Component: 200 - total flux cleaned = 0.0157796 Jy ! Total flux subtracted in 200 components = 0.0157796 Jy ! Clean residual min=-0.002960 max=0.002906 Jy/beam ! Clean residual mean=0.000001 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.302444 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 0.302444 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=3.14 mas, bpa=0.3143 degrees ! Estimated noise=0.767833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123732 Jy ! Component: 100 - total flux cleaned = -6.56873e-05 Jy ! Component: 150 - total flux cleaned = -0.000115403 Jy ! Component: 200 - total flux cleaned = -0.000200566 Jy ! Total flux subtracted in 200 components = -0.000200566 Jy ! Clean residual min=-0.002823 max=0.003375 Jy/beam ! Clean residual mean=-0.000002 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.302243 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.71028e-05 Jy ! Component: 100 - total flux cleaned = -0.000140462 Jy ! Component: 150 - total flux cleaned = -0.000203783 Jy ! Component: 200 - total flux cleaned = -0.000234025 Jy ! Total flux subtracted in 200 components = -0.000234025 Jy ! Clean residual min=-0.002792 max=0.003341 Jy/beam ! Clean residual mean=-0.000002 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.302009 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 52 components and 0.302009 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=2.213 mas, bpa=-9.412 degrees ! Estimated noise=0.659802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306622 Jy ! Component: 100 - total flux cleaned = -0.000406257 Jy ! Component: 150 - total flux cleaned = -0.000451638 Jy ! Component: 200 - total flux cleaned = -0.000410245 Jy ! Total flux subtracted in 200 components = -0.000410245 Jy ! Clean residual min=-0.002660 max=0.002555 Jy/beam ! Clean residual mean=-0.000000 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.301599 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.301599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062314Jy sigma=1.006794 ! Fit after self-cal, rms=0.062309Jy sigma=1.006630 wmodel J1033+071A_X_map.mod ! Writing 65 model components to file: J1033+071A_X_map.mod wobs J1033+071A_X_uvs.fits ! Writing UV FITS file: J1033+071A_X_uvs.fits wwins J1033+071A_X_map.win ! wwins: Wrote 3 windows to J1033+071A_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000602336 Jy ! Component: 100 - total flux cleaned = -0.000881178 Jy ! Component: 150 - total flux cleaned = -0.00115028 Jy ! Component: 200 - total flux cleaned = -0.00145254 Jy ! Component: 250 - total flux cleaned = -0.00161938 Jy ! Component: 300 - total flux cleaned = -0.00170156 Jy ! Component: 350 - total flux cleaned = -0.00162347 Jy ! Component: 400 - total flux cleaned = -0.00150788 Jy ! Component: 450 - total flux cleaned = -0.00139482 Jy ! Component: 500 - total flux cleaned = -0.00132077 Jy ! Component: 550 - total flux cleaned = -0.00114075 Jy ! Component: 600 - total flux cleaned = -0.00110615 Jy ! Component: 650 - total flux cleaned = -0.00100134 Jy ! Component: 700 - total flux cleaned = -0.000932773 Jy ! Component: 750 - total flux cleaned = -0.000932603 Jy ! Component: 800 - total flux cleaned = -0.000832712 Jy ! Component: 850 - total flux cleaned = -0.000997115 Jy ! Component: 900 - total flux cleaned = -0.000997058 Jy ! Component: 950 - total flux cleaned = -0.000965688 Jy ! Component: 1000 - total flux cleaned = -0.00106039 Jy ! Component: 1050 - total flux cleaned = -0.00102895 Jy ! Component: 1100 - total flux cleaned = -0.00102885 Jy ! Component: 1150 - total flux cleaned = -0.000998425 Jy ! Component: 1200 - total flux cleaned = -0.00099884 Jy ! Component: 1250 - total flux cleaned = -0.00117762 Jy ! Component: 1300 - total flux cleaned = -0.00117764 Jy ! Component: 1350 - total flux cleaned = -0.00123558 Jy ! Component: 1400 - total flux cleaned = -0.00126493 Jy ! Component: 1450 - total flux cleaned = -0.00137923 Jy ! Component: 1500 - total flux cleaned = -0.00152014 Jy ! Component: 1550 - total flux cleaned = -0.00163195 Jy ! Component: 1600 - total flux cleaned = -0.00168739 Jy ! Component: 1650 - total flux cleaned = -0.00182473 Jy ! Component: 1700 - total flux cleaned = -0.0018792 Jy ! Component: 1750 - total flux cleaned = -0.00204043 Jy ! Component: 1800 - total flux cleaned = -0.00193378 Jy ! Component: 1850 - total flux cleaned = -0.00203949 Jy ! Component: 1900 - total flux cleaned = -0.002118 Jy ! Component: 1950 - total flux cleaned = -0.00224755 Jy ! Component: 2000 - total flux cleaned = -0.00237592 Jy ! Component: 2050 - total flux cleaned = -0.00240145 Jy ! Component: 2100 - total flux cleaned = -0.00245159 Jy ! Component: 2150 - total flux cleaned = -0.00252696 Jy ! Component: 2200 - total flux cleaned = -0.00257641 Jy ! Component: 2250 - total flux cleaned = -0.00260081 Jy ! Component: 2300 - total flux cleaned = -0.00260069 Jy ! Component: 2350 - total flux cleaned = -0.00264942 Jy ! Component: 2400 - total flux cleaned = -0.00276992 Jy ! Component: 2450 - total flux cleaned = -0.0027938 Jy ! Component: 2500 - total flux cleaned = -0.00288882 Jy ! Component: 2550 - total flux cleaned = -0.00288875 Jy ! Component: 2600 - total flux cleaned = -0.00305238 Jy ! Component: 2650 - total flux cleaned = -0.00298286 Jy ! Component: 2700 - total flux cleaned = -0.00309769 Jy ! Component: 2750 - total flux cleaned = -0.00321175 Jy ! Component: 2800 - total flux cleaned = -0.00316642 Jy ! Component: 2850 - total flux cleaned = -0.00323405 Jy ! Component: 2900 - total flux cleaned = -0.00334559 Jy ! Component: 2950 - total flux cleaned = -0.00338996 Jy ! Component: 3000 - total flux cleaned = -0.00334625 Jy ! Component: 3050 - total flux cleaned = -0.00341179 Jy ! Component: 3100 - total flux cleaned = -0.00354145 Jy ! Component: 3150 - total flux cleaned = -0.00356257 Jy ! Component: 3200 - total flux cleaned = -0.0036479 Jy ! Component: 3250 - total flux cleaned = -0.00360527 Jy ! Component: 3300 - total flux cleaned = -0.00358455 Jy ! Component: 3350 - total flux cleaned = -0.00373083 Jy ! Component: 3400 - total flux cleaned = -0.00371024 Jy ! Component: 3450 - total flux cleaned = -0.0037515 Jy ! Component: 3500 - total flux cleaned = -0.00389496 Jy ! Component: 3550 - total flux cleaned = -0.00383387 Jy ! Component: 3600 - total flux cleaned = -0.00387428 Jy ! Component: 3650 - total flux cleaned = -0.00389428 Jy ! Component: 3700 - total flux cleaned = -0.00393408 Jy ! Component: 3750 - total flux cleaned = -0.00395387 Jy ! Component: 3800 - total flux cleaned = -0.0039736 Jy ! Component: 3850 - total flux cleaned = -0.00393448 Jy ! Component: 3900 - total flux cleaned = -0.00397336 Jy ! Component: 3950 - total flux cleaned = -0.00399254 Jy ! Component: 4000 - total flux cleaned = -0.00395421 Jy ! Component: 4050 - total flux cleaned = -0.00399244 Jy ! Total flux subtracted in 4096 components = -0.00399264 Jy ! Clean residual min=-0.001120 max=0.001171 Jy/beam ! Clean residual mean=0.000000 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.297606 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 377 components and 0.297606 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J1033+071A_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.125 x 2.213 at -9.412 degrees (North through East) ! Clean map min=-0.0019213 max=0.26581 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J1033+071A_X_map.fits wmodel /scr/pima/rv119_uvs/J1033+071A_X_map.mod ! Writing 377 model components to file: /scr/pima/rv119_uvs/J1033+071A_X_map.mod wobs /scr/pima/rv119_uvs/J1033+071A_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J1033+071A_X_uvs.fits wwins /scr/pima/rv119_uvs/J1033+071A_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv119_uvs/J1033+071A_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.265815 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000337292 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.380669 0.380669 0.761338 1.52268 3.04535 6.0907 12.1814 24.3628 48.7256 97.4512 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.265 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 788.086 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J1033+071A_X_dfm.log closed on Sun Dec 17 11:35:09 2017