! Started logfile: /scr/pima/rv119_uvs/J0958+6533_X_dfm.log on Sun Dec 17 11:34:59 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv119_uvs/J0958+6533_X_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0958+6533_X_uva.fits ! AN table 1: 40 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.578205 visibilities/baseline/integration-bin. ! Found source: J0958+6533 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7216 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0958+6533_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.287159Jy sigma=19.173903 ! Fit after self-cal, rms=0.260739Jy sigma=3.698123 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5199 mas, bmaj=0.9072 mas, bpa=-54.6 degrees ! Estimated noise=0.862105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.611937 Jy ! Component: 100 - total flux cleaned = 0.7735 Jy ! Total flux subtracted in 100 components = 0.7735 Jy ! Clean residual min=-0.014866 max=0.071655 Jy/beam ! Clean residual mean=-0.000014 rms=0.003457 Jy/beam ! Combined flux in latest and established models = 0.7735 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.7735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170787Jy sigma=2.468915 ! Fit after self-cal, rms=0.169814Jy sigma=2.457092 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0823206 Jy ! Component: 100 - total flux cleaned = 0.125286 Jy ! Total flux subtracted in 100 components = 0.125286 Jy ! Clean residual min=-0.009137 max=0.026830 Jy/beam ! Clean residual mean=-0.000007 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.898785 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.898785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109469Jy sigma=1.486012 ! Fit after self-cal, rms=0.108665Jy sigma=1.477051 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (-0.4, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297477 Jy ! Component: 100 - total flux cleaned = 0.0461372 Jy ! Total flux subtracted in 100 components = 0.0461372 Jy ! Clean residual min=-0.007285 max=0.013667 Jy/beam ! Clean residual mean=-0.000005 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.944922 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.944923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096098Jy sigma=1.265009 ! Fit after self-cal, rms=0.095781Jy sigma=1.260191 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126139 Jy ! Component: 100 - total flux cleaned = 0.020427 Jy ! Total flux subtracted in 100 components = 0.020427 Jy ! Clean residual min=-0.006581 max=0.009670 Jy/beam ! Clean residual mean=-0.000004 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.965349 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.965349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092749Jy sigma=1.208264 ! Fit after self-cal, rms=0.092637Jy sigma=1.206477 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590758 Jy ! Component: 100 - total flux cleaned = 0.0081786 Jy ! Total flux subtracted in 100 components = 0.0081786 Jy ! Clean residual min=-0.006602 max=0.008561 Jy/beam ! Clean residual mean=-0.000003 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.973528 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.973528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091231Jy sigma=1.185757 ! Fit after self-cal, rms=0.091129Jy sigma=1.184278 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (-2.2, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748991 Jy ! Component: 100 - total flux cleaned = 0.00884041 Jy ! Total flux subtracted in 100 components = 0.00884041 Jy ! Clean residual min=-0.006419 max=0.007081 Jy/beam ! Clean residual mean=-0.000003 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.982369 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.982369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089836Jy sigma=1.164975 ! Fit after self-cal, rms=0.089812Jy sigma=1.164479 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5946 mas, bmaj=1.004 mas, bpa=-55.95 degrees ! Estimated noise=0.577709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011707 Jy ! Component: 100 - total flux cleaned = 0.0194725 Jy ! Component: 150 - total flux cleaned = 0.0249234 Jy ! Component: 200 - total flux cleaned = 0.0275518 Jy ! Total flux subtracted in 200 components = 0.0275518 Jy ! Clean residual min=-0.007102 max=0.008596 Jy/beam ! Clean residual mean=-0.000000 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 1.00992 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 1.00992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087706Jy sigma=1.137099 ! Fit after self-cal, rms=0.087616Jy sigma=1.135264 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (-2.4, -14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741741 Jy ! Component: 100 - total flux cleaned = 0.00983393 Jy ! Component: 150 - total flux cleaned = 0.0112411 Jy ! Component: 200 - total flux cleaned = 0.0118502 Jy ! Total flux subtracted in 200 components = 0.0118502 Jy ! Clean residual min=-0.007065 max=0.007099 Jy/beam ! Clean residual mean=0.000000 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 1.02177 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 1.02177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086851Jy sigma=1.123055 ! Fit after self-cal, rms=0.086817Jy sigma=1.122268 ! Inverting map ! Your choice of large map pixels excluded 0.472% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5946 x 1.004 at -55.95 degrees (North through East) ! Clean map min=-0.0060641 max=0.79344 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 0.99 ! LA 0.99 MK 1.01 NL 1.01 NY 1.10 ! ON 0.98 OV 1.01 PT 1.02 SC 1.01 ! WZ 1.00 ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 0.99 ! LA 0.99 MK 1.00 NL 1.01 NY 1.06 ! ON 0.99 OV 1.01 PT 1.02 SC 0.99 ! WZ 0.98 ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.99 KP 0.99 ! LA 0.99 MK 1.00 NL 1.01 NY 1.08 ! ON 0.99 OV 1.01 PT 1.01 SC 0.98 ! WZ 0.97 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.99 KP 0.98 ! LA 0.99 MK 0.99 NL 1.00 NY 1.08 ! ON 0.99 OV 1.00 PT 1.01 SC 0.96 ! WZ 0.97 ! ! ! Fit before self-cal, rms=0.086817Jy sigma=1.122268 ! Fit after self-cal, rms=0.084973Jy sigma=1.077956 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5914 mas, bmaj=1.005 mas, bpa=-55.62 degrees ! Estimated noise=0.581215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157277 Jy ! Component: 100 - total flux cleaned = -0.0021873 Jy ! Component: 150 - total flux cleaned = -0.00259853 Jy ! Component: 200 - total flux cleaned = -0.00312176 Jy ! Total flux subtracted in 200 components = -0.00312176 Jy ! Clean residual min=-0.004245 max=0.004269 Jy/beam ! Clean residual mean=-0.000001 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 1.01865 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 1.01865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084655Jy sigma=1.073537 ! Fit after self-cal, rms=0.084637Jy sigma=1.073238 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (31.2, 19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398675 Jy ! Component: 100 - total flux cleaned = 0.00462615 Jy ! Component: 150 - total flux cleaned = 0.00479781 Jy ! Component: 200 - total flux cleaned = 0.00510152 Jy ! Total flux subtracted in 200 components = 0.00510152 Jy ! Clean residual min=-0.003984 max=0.003623 Jy/beam ! Clean residual mean=-0.000002 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 1.02375 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 1.02375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084351Jy sigma=1.068960 ! Fit after self-cal, rms=0.084323Jy sigma=1.068418 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084323Jy sigma=1.068418 ! Fit after self-cal, rms=0.081291Jy sigma=1.016847 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5914 mas, bmaj=1.003 mas, bpa=-55.58 degrees ! Estimated noise=0.581471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205648 Jy ! Component: 100 - total flux cleaned = -0.00233996 Jy ! Component: 150 - total flux cleaned = -0.00225749 Jy ! Component: 200 - total flux cleaned = -0.00219043 Jy ! Total flux subtracted in 200 components = -0.00219043 Jy ! Clean residual min=-0.002862 max=0.002884 Jy/beam ! Clean residual mean=-0.000002 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 1.02156 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 1.02156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081090Jy sigma=1.013871 ! Fit after self-cal, rms=0.081083Jy sigma=1.013762 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283749 Jy ! Component: 100 - total flux cleaned = 0.00369578 Jy ! Component: 150 - total flux cleaned = 0.00412263 Jy ! Component: 200 - total flux cleaned = 0.00440551 Jy ! Total flux subtracted in 200 components = 0.00440551 Jy ! Clean residual min=-0.002717 max=0.002666 Jy/beam ! Clean residual mean=-0.000002 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 1.02597 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 105 components and 1.02597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080946Jy sigma=1.011574 ! Fit after self-cal, rms=0.080940Jy sigma=1.011503 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080940Jy sigma=1.011503 ! Fit after self-cal, rms=0.080897Jy sigma=1.009393 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5914 mas, bmaj=1.003 mas, bpa=-55.53 degrees ! Estimated noise=0.581072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000868376 Jy ! Component: 100 - total flux cleaned = -0.00086703 Jy ! Component: 150 - total flux cleaned = -0.000589649 Jy ! Component: 200 - total flux cleaned = -0.000387482 Jy ! Total flux subtracted in 200 components = -0.000387482 Jy ! Clean residual min=-0.002651 max=0.002528 Jy/beam ! Clean residual mean=-0.000002 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 1.02558 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 113 components and 1.02558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080813Jy sigma=1.008163 ! Fit after self-cal, rms=0.080809Jy sigma=1.008129 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.43182e-05 Jy ! Component: 100 - total flux cleaned = 8.59871e-05 Jy ! Component: 150 - total flux cleaned = 8.6629e-05 Jy ! Component: 200 - total flux cleaned = 8.69394e-05 Jy ! Total flux subtracted in 200 components = 8.69394e-05 Jy ! Clean residual min=-0.002634 max=0.002492 Jy/beam ! Clean residual mean=-0.000002 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 1.02566 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 120 components and 1.02566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080759Jy sigma=1.007457 ! Fit after self-cal, rms=0.080757Jy sigma=1.007438 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080757Jy sigma=1.007438 ! Fit after self-cal, rms=0.080849Jy sigma=1.007256 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=2.126 mas, bmaj=2.819 mas, bpa=-7.517 degrees ! Estimated noise=0.909136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.50859e-05 Jy ! Component: 100 - total flux cleaned = 0.000385466 Jy ! Component: 150 - total flux cleaned = 0.000887862 Jy ! Component: 200 - total flux cleaned = 0.00131189 Jy ! Total flux subtracted in 200 components = 0.00131189 Jy ! Clean residual min=-0.003721 max=0.004127 Jy/beam ! Clean residual mean=-0.000007 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 1.02698 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 129 components and 1.02698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080839Jy sigma=1.007244 ! Fit after self-cal, rms=0.080836Jy sigma=1.007173 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181241 Jy ! Component: 100 - total flux cleaned = 0.000521112 Jy ! Component: 150 - total flux cleaned = 0.000611629 Jy ! Component: 200 - total flux cleaned = 0.000667225 Jy ! Total flux subtracted in 200 components = 0.000667225 Jy ! Clean residual min=-0.003738 max=0.004074 Jy/beam ! Clean residual mean=-0.000007 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 1.02764 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 132 components and 1.02764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080841Jy sigma=1.007327 ! Fit after self-cal, rms=0.080842Jy sigma=1.007314 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5914 mas, bmaj=1.003 mas, bpa=-55.5 degrees ! Estimated noise=0.580864 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5914 x 1.003 at -55.5 degrees (North through East) ! Clean map min=-0.002746 max=0.79335 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080842Jy sigma=1.007314 ! Fit after self-cal, rms=0.066804Jy sigma=0.846534 ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5915 mas, bmaj=1.003 mas, bpa=-55.5 degrees ! Estimated noise=0.580814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156111 Jy ! Component: 100 - total flux cleaned = -0.00161645 Jy ! Component: 150 - total flux cleaned = -0.00171168 Jy ! Component: 200 - total flux cleaned = -0.00175639 Jy ! Total flux subtracted in 200 components = -0.00175639 Jy ! Clean residual min=-0.002429 max=0.002431 Jy/beam ! Clean residual mean=-0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 1.02589 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 1.02589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066727Jy sigma=0.845366 ! Fit after self-cal, rms=0.066724Jy sigma=0.845341 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176606 Jy ! Component: 100 - total flux cleaned = -0.000216799 Jy ! Component: 150 - total flux cleaned = -0.00025536 Jy ! Component: 200 - total flux cleaned = -0.000291985 Jy ! Total flux subtracted in 200 components = -0.000291985 Jy ! Clean residual min=-0.002431 max=0.002393 Jy/beam ! Clean residual mean=-0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 1.02559 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 151 components and 1.0256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066677Jy sigma=0.844700 ! Fit after self-cal, rms=0.066676Jy sigma=0.844690 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066676Jy sigma=0.844690 ! Fit after self-cal, rms=0.066669Jy sigma=0.844539 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5133 mas, bmaj=0.9031 mas, bpa=-54.18 degrees ! Estimated noise=0.869818 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.611218 Jy ! Component: 100 - total flux cleaned = 0.781473 Jy ! Component: 150 - total flux cleaned = 0.866784 Jy ! Component: 200 - total flux cleaned = 0.911233 Jy ! Total flux subtracted in 200 components = 0.911233 Jy ! Clean residual min=-0.005875 max=0.021147 Jy/beam ! Clean residual mean=-0.000008 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.911233 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.911233 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5915 mas, bmaj=1.003 mas, bpa=-55.48 degrees ! Estimated noise=0.580553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335579 Jy ! Component: 100 - total flux cleaned = 0.0525722 Jy ! Component: 150 - total flux cleaned = 0.0656589 Jy ! Component: 200 - total flux cleaned = 0.0751904 Jy ! Total flux subtracted in 200 components = 0.0751904 Jy ! Clean residual min=-0.003375 max=0.006379 Jy/beam ! Clean residual mean=-0.000004 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.986423 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 32 components and 0.986423 Jy ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (-1.4, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725778 Jy ! Component: 100 - total flux cleaned = 0.0126441 Jy ! Component: 150 - total flux cleaned = 0.0168984 Jy ! Component: 200 - total flux cleaned = 0.0204351 Jy ! Total flux subtracted in 200 components = 0.0204351 Jy ! Clean residual min=-0.002740 max=0.003062 Jy/beam ! Clean residual mean=-0.000003 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 1.00686 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 1.00686 Jy ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (24, 26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325041 Jy ! Component: 100 - total flux cleaned = 0.00560745 Jy ! Component: 150 - total flux cleaned = 0.00760385 Jy ! Component: 200 - total flux cleaned = 0.00940224 Jy ! Total flux subtracted in 200 components = 0.00940224 Jy ! Clean residual min=-0.002651 max=0.002827 Jy/beam ! Clean residual mean=-0.000002 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 1.01626 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 76 components and 1.01626 Jy ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (-1.2, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215213 Jy ! Component: 100 - total flux cleaned = 0.00354466 Jy ! Component: 150 - total flux cleaned = 0.004622 Jy ! Component: 200 - total flux cleaned = 0.0054326 Jy ! Total flux subtracted in 200 components = 0.0054326 Jy ! Clean residual min=-0.002483 max=0.002587 Jy/beam ! Clean residual mean=-0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 1.02169 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 92 components and 1.02169 Jy ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (2.2, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236944 Jy ! Component: 100 - total flux cleaned = 0.00339071 Jy ! Component: 150 - total flux cleaned = 0.0039276 Jy ! Component: 200 - total flux cleaned = 0.00432677 Jy ! Total flux subtracted in 200 components = 0.00432677 Jy ! Clean residual min=-0.002414 max=0.002470 Jy/beam ! Clean residual mean=-0.000002 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 1.02602 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 105 components and 1.02602 Jy ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Added new window around map position (-26, 34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182938 Jy ! Component: 100 - total flux cleaned = 0.00226667 Jy ! Component: 150 - total flux cleaned = 0.00262964 Jy ! Component: 200 - total flux cleaned = 0.00297714 Jy ! Total flux subtracted in 200 components = 0.00297714 Jy ! Clean residual min=-0.002352 max=0.002205 Jy/beam ! Clean residual mean=-0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 1.029 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 114 components and 1.029 Jy ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=2.126 mas, bmaj=2.819 mas, bpa=-7.476 degrees ! Estimated noise=0.908715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213948 Jy ! Component: 100 - total flux cleaned = 0.00331875 Jy ! Component: 150 - total flux cleaned = 0.0042878 Jy ! Component: 200 - total flux cleaned = 0.00505313 Jy ! Total flux subtracted in 200 components = 0.00505313 Jy ! Clean residual min=-0.003412 max=0.003195 Jy/beam ! Clean residual mean=-0.000005 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 1.03405 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626668 Jy ! Component: 100 - total flux cleaned = 0.00106962 Jy ! Component: 150 - total flux cleaned = 0.00147531 Jy ! Component: 200 - total flux cleaned = 0.00185098 Jy ! Total flux subtracted in 200 components = 0.00185098 Jy ! Clean residual min=-0.003237 max=0.003256 Jy/beam ! Clean residual mean=-0.000005 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 1.0359 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 142 components and 1.0359 Jy ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! Estimated beam: bmin=0.5915 mas, bmaj=1.003 mas, bpa=-55.48 degrees ! Estimated noise=0.580553 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163124 Jy ! Component: 100 - total flux cleaned = -0.00184182 Jy ! Component: 150 - total flux cleaned = -0.0019854 Jy ! Component: 200 - total flux cleaned = -0.00198608 Jy ! Total flux subtracted in 200 components = -0.00198608 Jy ! Clean residual min=-0.002312 max=0.002148 Jy/beam ! Clean residual mean=-0.000001 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 1.03391 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 153 components and 1.03391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066483Jy sigma=0.842394 ! Fit after self-cal, rms=0.066422Jy sigma=0.841398 wmodel J0958+6533_X_map.mod ! Writing 153 model components to file: J0958+6533_X_map.mod wobs J0958+6533_X_uvs.fits ! Writing UV FITS file: J0958+6533_X_uvs.fits wwins J0958+6533_X_map.win ! wwins: Wrote 12 windows to J0958+6533_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100512 Jy ! Component: 100 - total flux cleaned = -0.00132854 Jy ! Component: 150 - total flux cleaned = -0.00152261 Jy ! Component: 200 - total flux cleaned = -0.00175022 Jy ! Component: 250 - total flux cleaned = -0.00193508 Jy ! Component: 300 - total flux cleaned = -0.00215187 Jy ! Component: 350 - total flux cleaned = -0.00218672 Jy ! Component: 400 - total flux cleaned = -0.0022562 Jy ! Component: 450 - total flux cleaned = -0.00225602 Jy ! Component: 500 - total flux cleaned = -0.00229041 Jy ! Component: 550 - total flux cleaned = -0.00235787 Jy ! Component: 600 - total flux cleaned = -0.00245818 Jy ! Component: 650 - total flux cleaned = -0.0025905 Jy ! Component: 700 - total flux cleaned = -0.00259107 Jy ! Component: 750 - total flux cleaned = -0.00281785 Jy ! Component: 800 - total flux cleaned = -0.00288178 Jy ! Component: 850 - total flux cleaned = -0.00297764 Jy ! Component: 900 - total flux cleaned = -0.00307229 Jy ! Component: 950 - total flux cleaned = -0.00319771 Jy ! Component: 1000 - total flux cleaned = -0.00325985 Jy ! Component: 1050 - total flux cleaned = -0.00341436 Jy ! Component: 1100 - total flux cleaned = -0.00347567 Jy ! Component: 1150 - total flux cleaned = -0.0035975 Jy ! Component: 1200 - total flux cleaned = -0.00371817 Jy ! Component: 1250 - total flux cleaned = -0.00374829 Jy ! Component: 1300 - total flux cleaned = -0.00398671 Jy ! Component: 1350 - total flux cleaned = -0.00389782 Jy ! Component: 1400 - total flux cleaned = -0.00407437 Jy ! Component: 1450 - total flux cleaned = -0.00401582 Jy ! Component: 1500 - total flux cleaned = -0.00404495 Jy ! Component: 1550 - total flux cleaned = -0.00418939 Jy ! Component: 1600 - total flux cleaned = -0.00421811 Jy ! Component: 1650 - total flux cleaned = -0.00436101 Jy ! Component: 1700 - total flux cleaned = -0.00433233 Jy ! Component: 1750 - total flux cleaned = -0.00444566 Jy ! Component: 1800 - total flux cleaned = -0.00461417 Jy ! Component: 1850 - total flux cleaned = -0.00455812 Jy ! Component: 1900 - total flux cleaned = -0.00466951 Jy ! Component: 1950 - total flux cleaned = -0.00483578 Jy ! Component: 2000 - total flux cleaned = -0.00480815 Jy ! Component: 2050 - total flux cleaned = -0.00502738 Jy ! Component: 2100 - total flux cleaned = -0.00510921 Jy ! Component: 2150 - total flux cleaned = -0.00508219 Jy ! Component: 2200 - total flux cleaned = -0.00521742 Jy ! Component: 2250 - total flux cleaned = -0.0053787 Jy ! Component: 2300 - total flux cleaned = -0.00540545 Jy ! Component: 2350 - total flux cleaned = -0.00548528 Jy ! Component: 2400 - total flux cleaned = -0.00553828 Jy ! Component: 2450 - total flux cleaned = -0.00551225 Jy ! Component: 2500 - total flux cleaned = -0.0056171 Jy ! Component: 2550 - total flux cleaned = -0.00564315 Jy ! Component: 2600 - total flux cleaned = -0.00574739 Jy ! Component: 2650 - total flux cleaned = -0.0057474 Jy ! Component: 2700 - total flux cleaned = -0.00566976 Jy ! Component: 2750 - total flux cleaned = -0.00561823 Jy ! Component: 2800 - total flux cleaned = -0.00572083 Jy ! Component: 2850 - total flux cleaned = -0.00569532 Jy ! Component: 2900 - total flux cleaned = -0.00564445 Jy ! Component: 2950 - total flux cleaned = -0.00574603 Jy ! Component: 3000 - total flux cleaned = -0.00569553 Jy ! Component: 3050 - total flux cleaned = -0.00572067 Jy ! Component: 3100 - total flux cleaned = -0.00569588 Jy ! Component: 3150 - total flux cleaned = -0.00572097 Jy ! Component: 3200 - total flux cleaned = -0.00579563 Jy ! Component: 3250 - total flux cleaned = -0.00572134 Jy ! Component: 3300 - total flux cleaned = -0.00562277 Jy ! Component: 3350 - total flux cleaned = -0.00581976 Jy ! Component: 3400 - total flux cleaned = -0.0058199 Jy ! Component: 3450 - total flux cleaned = -0.00572201 Jy ! Component: 3500 - total flux cleaned = -0.00577074 Jy ! Component: 3550 - total flux cleaned = -0.00577069 Jy ! Component: 3600 - total flux cleaned = -0.00584326 Jy ! Component: 3650 - total flux cleaned = -0.00579517 Jy ! Component: 3700 - total flux cleaned = -0.00591541 Jy ! Component: 3750 - total flux cleaned = -0.00589161 Jy ! Component: 3800 - total flux cleaned = -0.00582002 Jy ! Component: 3850 - total flux cleaned = -0.00596274 Jy ! Component: 3900 - total flux cleaned = -0.00598629 Jy ! Component: 3950 - total flux cleaned = -0.005939 Jy ! Component: 4000 - total flux cleaned = -0.00596257 Jy ! Component: 4050 - total flux cleaned = -0.00586854 Jy ! Total flux subtracted in 4096 components = -0.00591536 Jy ! Clean residual min=-0.001631 max=0.001576 Jy/beam ! Clean residual mean=-0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 1.028 Jy keep ! Adding 369 model components to the UV plane model. ! The established model now contains 522 components and 1.028 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0958+6533_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5915 x 1.003 at -55.48 degrees (North through East) ! Clean map min=-0.0016619 max=0.79585 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0958+6533_X_map.fits wmodel /scr/pima/rv119_uvs/J0958+6533_X_map.mod ! Writing 522 model components to file: /scr/pima/rv119_uvs/J0958+6533_X_map.mod wobs /scr/pima/rv119_uvs/J0958+6533_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0958+6533_X_uvs.fits wwins /scr/pima/rv119_uvs/J0958+6533_X_map.win ! wwins: Wrote 13 windows to /scr/pima/rv119_uvs/J0958+6533_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.795847 invert ! Inverting map ! Your choice of large map pixels excluded 0.478% of the data. ! The x-axis pixel size should ideally be below 0.1704 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000389748 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.146918 0.146918 0.293836 0.587673 1.17535 2.35069 4.70138 9.40277 18.8055 37.6111 75.2221 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.795 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2041.95 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0958+6533_X_dfm.log closed on Sun Dec 17 11:35:04 2017