! Started logfile: /scr/pima/rv119_uvs/J0953+3225_S_dfm.log on Sun Dec 17 11:35:38 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv119_uvs/J0953+3225_S_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0953+3225_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.858081 visibilities/baseline/integration-bin. ! Found source: J0953+3225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 6796 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0953+3225_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013948Jy sigma=20.887999 ! Fit after self-cal, rms=0.862097Jy sigma=17.982827 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=4.82 mas, bpa=-3.105 degrees ! Estimated noise=0.781404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104633 Jy ! Component: 100 - total flux cleaned = 0.127815 Jy ! Total flux subtracted in 100 components = 0.127815 Jy ! Clean residual min=-0.005060 max=0.007617 Jy/beam ! Clean residual mean=0.000009 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.127815 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.127815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101782Jy sigma=1.409184 ! Fit after self-cal, rms=0.101764Jy sigma=1.409043 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=5.65 mas, bpa=2.419 degrees ! Estimated noise=0.438479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107241 Jy ! Component: 100 - total flux cleaned = 0.0155296 Jy ! Component: 150 - total flux cleaned = 0.0183749 Jy ! Component: 200 - total flux cleaned = 0.0201695 Jy ! Total flux subtracted in 200 components = 0.0201695 Jy ! Clean residual min=-0.005545 max=0.004679 Jy/beam ! Clean residual mean=0.000018 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.147984 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.147984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100031Jy sigma=1.387974 ! Fit after self-cal, rms=0.100024Jy sigma=1.387635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 5.65 at 2.419 degrees (North through East) ! Clean map min=-0.0053193 max=0.13691 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.97 KP 1.01 ! LA 1.01 MK 1.04 NL 1.02 OV 1.03 ! PT 1.02 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 0.98 KP 1.03 ! LA 1.01 MK 1.04 NL 1.03 OV 1.03 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.14 KP 0.41 ! LA 1.08 MK 1.17 NL 1.00* OV 1.03 ! PT 1.00 SC 0.69 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.98 KP 1.02 ! LA 0.99 MK 1.02 NL 0.98 OV 1.01 ! PT 1.00 SC 1.04 ! ! ! Fit before self-cal, rms=0.100024Jy sigma=1.387635 ! Fit after self-cal, rms=0.057801Jy sigma=1.271589 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=5.674 mas, bpa=3.801 degrees ! Estimated noise=0.437304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103136 Jy ! Component: 100 - total flux cleaned = 4.2679e-05 Jy ! Component: 150 - total flux cleaned = 4.24992e-05 Jy ! Component: 200 - total flux cleaned = 4.29836e-05 Jy ! Total flux subtracted in 200 components = 4.29836e-05 Jy ! Clean residual min=-0.002703 max=0.003166 Jy/beam ! Clean residual mean=0.000005 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.148027 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.148027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057778Jy sigma=1.271107 ! Fit after self-cal, rms=0.058064Jy sigma=1.263654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058064Jy sigma=1.263654 ! Fit after self-cal, rms=0.058004Jy sigma=1.259757 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=5.676 mas, bpa=3.919 degrees ! Estimated noise=0.437372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136796 Jy ! Component: 100 - total flux cleaned = 2.71797e-05 Jy ! Component: 150 - total flux cleaned = -1.63763e-05 Jy ! Component: 200 - total flux cleaned = -2.98233e-05 Jy ! Total flux subtracted in 200 components = -2.98233e-05 Jy ! Clean residual min=-0.002621 max=0.003320 Jy/beam ! Clean residual mean=0.000006 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.147997 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.147997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057993Jy sigma=1.259542 ! Fit after self-cal, rms=0.058104Jy sigma=1.259280 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205982 Jy ! Component: 100 - total flux cleaned = 0.00164288 Jy ! Component: 150 - total flux cleaned = 0.00142517 Jy ! Component: 200 - total flux cleaned = 0.00131188 Jy ! Total flux subtracted in 200 components = 0.00131188 Jy ! Clean residual min=-0.002462 max=0.002803 Jy/beam ! Clean residual mean=0.000006 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.149309 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.149309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057997Jy sigma=1.255962 ! Fit after self-cal, rms=0.057977Jy sigma=1.255766 ! Inverting map ! Added new window around map position (97.5, 57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204385 Jy ! Component: 100 - total flux cleaned = 0.00228507 Jy ! Component: 150 - total flux cleaned = 0.00213076 Jy ! Component: 200 - total flux cleaned = 0.00213139 Jy ! Total flux subtracted in 200 components = 0.00213139 Jy ! Clean residual min=-0.002448 max=0.002805 Jy/beam ! Clean residual mean=0.000006 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.151441 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.151441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057896Jy sigma=1.253097 ! Fit after self-cal, rms=0.057887Jy sigma=1.252992 ! Inverting map ! Added new window around map position (-69.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195863 Jy ! Component: 100 - total flux cleaned = 0.00208443 Jy ! Component: 150 - total flux cleaned = 0.00221953 Jy ! Component: 200 - total flux cleaned = 0.00230372 Jy ! Total flux subtracted in 200 components = 0.00230372 Jy ! Clean residual min=-0.002313 max=0.002553 Jy/beam ! Clean residual mean=0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.153744 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.153744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057788Jy sigma=1.249979 ! Fit after self-cal, rms=0.057785Jy sigma=1.249829 ! Inverting map ! Added new window around map position (-56.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106593 Jy ! Component: 100 - total flux cleaned = 0.00121288 Jy ! Component: 150 - total flux cleaned = 0.00157251 Jy ! Component: 200 - total flux cleaned = 0.00173834 Jy ! Total flux subtracted in 200 components = 0.00173834 Jy ! Clean residual min=-0.002299 max=0.002227 Jy/beam ! Clean residual mean=0.000005 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.155483 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.155483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057687Jy sigma=1.247351 ! Fit after self-cal, rms=0.057680Jy sigma=1.247230 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057680Jy sigma=1.247230 ! Fit after self-cal, rms=0.057363Jy sigma=1.246746 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.535 mas, bmaj=5.667 mas, bpa=4.071 degrees ! Estimated noise=0.435288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642825 Jy ! Component: 100 - total flux cleaned = 0.00113204 Jy ! Component: 150 - total flux cleaned = 0.00135581 Jy ! Component: 200 - total flux cleaned = 0.0013917 Jy ! Total flux subtracted in 200 components = 0.0013917 Jy ! Clean residual min=-0.002189 max=0.002156 Jy/beam ! Clean residual mean=0.000005 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.156874 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 128 components and 0.156874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057325Jy sigma=1.245520 ! Fit after self-cal, rms=0.057339Jy sigma=1.245485 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322782 Jy ! Component: 100 - total flux cleaned = 0.000357246 Jy ! Component: 150 - total flux cleaned = 0.000421413 Jy ! Component: 200 - total flux cleaned = 0.000451324 Jy ! Total flux subtracted in 200 components = 0.000451324 Jy ! Clean residual min=-0.002122 max=0.002136 Jy/beam ! Clean residual mean=0.000005 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.157326 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 140 components and 0.157326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057315Jy sigma=1.244664 ! Fit after self-cal, rms=0.057313Jy sigma=1.244657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057313Jy sigma=1.244657 ! Fit after self-cal, rms=0.057274Jy sigma=1.244614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.128 mas, bmaj=9.161 mas, bpa=4.599 degrees ! Estimated noise=0.549138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.74954e-05 Jy ! Component: 100 - total flux cleaned = 0.000189439 Jy ! Component: 150 - total flux cleaned = 0.00026908 Jy ! Component: 200 - total flux cleaned = 0.000317697 Jy ! Total flux subtracted in 200 components = 0.000317697 Jy ! Clean residual min=-0.002184 max=0.002358 Jy/beam ! Clean residual mean=0.000011 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.157644 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 158 components and 0.157644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057262Jy sigma=1.244350 ! Fit after self-cal, rms=0.057265Jy sigma=1.244333 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101929 Jy ! Component: 100 - total flux cleaned = 0.000125012 Jy ! Component: 150 - total flux cleaned = 0.000167632 Jy ! Component: 200 - total flux cleaned = 0.000228232 Jy ! Total flux subtracted in 200 components = 0.000228232 Jy ! Clean residual min=-0.002175 max=0.002345 Jy/beam ! Clean residual mean=0.000011 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.157872 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 170 components and 0.157872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057259Jy sigma=1.244165 ! Fit after self-cal, rms=0.057260Jy sigma=1.244160 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=5.664 mas, bpa=4.09 degrees ! Estimated noise=0.434947 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 5.664 at 4.09 degrees (North through East) ! Clean map min=-0.0020461 max=0.13643 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=4.796 mas, bpa=-1.235 degrees ! Estimated noise=0.787388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105149 Jy ! Component: 100 - total flux cleaned = 0.128468 Jy ! Component: 150 - total flux cleaned = 0.136999 Jy ! Component: 200 - total flux cleaned = 0.140541 Jy ! Total flux subtracted in 200 components = 0.140541 Jy ! Clean residual min=-0.004906 max=0.004884 Jy/beam ! Clean residual mean=0.000005 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.140541 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.140541 Jy ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=5.664 mas, bpa=4.09 degrees ! Estimated noise=0.434947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460773 Jy ! Component: 100 - total flux cleaned = 0.00780338 Jy ! Component: 150 - total flux cleaned = 0.0103682 Jy ! Component: 200 - total flux cleaned = 0.0123845 Jy ! Total flux subtracted in 200 components = 0.0123845 Jy ! Clean residual min=-0.002488 max=0.002427 Jy/beam ! Clean residual mean=0.000005 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.152926 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.152926 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.128 mas, bmaj=9.161 mas, bpa=4.599 degrees ! Estimated noise=0.549138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135816 Jy ! Component: 100 - total flux cleaned = 0.0019356 Jy ! Component: 150 - total flux cleaned = 0.00209996 Jy ! Component: 200 - total flux cleaned = 0.00209795 Jy ! Total flux subtracted in 200 components = 0.00209795 Jy ! Clean residual min=-0.002175 max=0.002573 Jy/beam ! Clean residual mean=0.000009 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.155024 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.47411e-05 Jy ! Component: 100 - total flux cleaned = 0.000281035 Jy ! Component: 150 - total flux cleaned = 0.00042408 Jy ! Component: 200 - total flux cleaned = 0.000522351 Jy ! Total flux subtracted in 200 components = 0.000522351 Jy ! Clean residual min=-0.002165 max=0.002449 Jy/beam ! Clean residual mean=0.000010 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.155546 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 76 components and 0.155546 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=5.664 mas, bpa=4.09 degrees ! Estimated noise=0.434947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479997 Jy ! Component: 100 - total flux cleaned = 0.000588618 Jy ! Component: 150 - total flux cleaned = 0.000640016 Jy ! Component: 200 - total flux cleaned = 0.000689828 Jy ! Total flux subtracted in 200 components = 0.000689828 Jy ! Clean residual min=-0.002134 max=0.002222 Jy/beam ! Clean residual mean=0.000004 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.156236 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 103 components and 0.156236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057373Jy sigma=1.248071 ! Fit after self-cal, rms=0.057326Jy sigma=1.247836 wmodel J0953+3225_S_map.mod ! Writing 103 model components to file: J0953+3225_S_map.mod wobs J0953+3225_S_uvs.fits ! Writing UV FITS file: J0953+3225_S_uvs.fits wwins J0953+3225_S_map.win ! wwins: Wrote 5 windows to J0953+3225_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.38451e-07 Jy ! Component: 100 - total flux cleaned = 0.000114077 Jy ! Component: 150 - total flux cleaned = 0.000366415 Jy ! Component: 200 - total flux cleaned = 0.000644377 Jy ! Component: 250 - total flux cleaned = 0.000911778 Jy ! Component: 300 - total flux cleaned = 0.00107344 Jy ! Component: 350 - total flux cleaned = 0.00129469 Jy ! Component: 400 - total flux cleaned = 0.00148013 Jy ! Component: 450 - total flux cleaned = 0.00172088 Jy ! Component: 500 - total flux cleaned = 0.00178021 Jy ! Component: 550 - total flux cleaned = 0.00201218 Jy ! Component: 600 - total flux cleaned = 0.00218298 Jy ! Component: 650 - total flux cleaned = 0.00232278 Jy ! Component: 700 - total flux cleaned = 0.00254232 Jy ! Component: 750 - total flux cleaned = 0.00270419 Jy ! Component: 800 - total flux cleaned = 0.00281023 Jy ! Component: 850 - total flux cleaned = 0.00294026 Jy ! Component: 900 - total flux cleaned = 0.00301703 Jy ! Component: 950 - total flux cleaned = 0.00311907 Jy ! Component: 1000 - total flux cleaned = 0.00324451 Jy ! Component: 1050 - total flux cleaned = 0.00326945 Jy ! Component: 1100 - total flux cleaned = 0.00341614 Jy ! Component: 1150 - total flux cleaned = 0.00348828 Jy ! Component: 1200 - total flux cleaned = 0.00358373 Jy ! Component: 1250 - total flux cleaned = 0.0037014 Jy ! Component: 1300 - total flux cleaned = 0.00388716 Jy ! Component: 1350 - total flux cleaned = 0.00393255 Jy ! Component: 1400 - total flux cleaned = 0.00404586 Jy ! Component: 1450 - total flux cleaned = 0.00409104 Jy ! Component: 1500 - total flux cleaned = 0.00429105 Jy ! Component: 1550 - total flux cleaned = 0.00437888 Jy ! Component: 1600 - total flux cleaned = 0.00446572 Jy ! Component: 1650 - total flux cleaned = 0.00450874 Jy ! Component: 1700 - total flux cleaned = 0.00467891 Jy ! Component: 1750 - total flux cleaned = 0.00474185 Jy ! Component: 1800 - total flux cleaned = 0.00470002 Jy ! Component: 1850 - total flux cleaned = 0.00482424 Jy ! Component: 1900 - total flux cleaned = 0.00484463 Jy ! Component: 1950 - total flux cleaned = 0.00494635 Jy ! Component: 2000 - total flux cleaned = 0.00508743 Jy ! Component: 2050 - total flux cleaned = 0.00510712 Jy ! Component: 2100 - total flux cleaned = 0.00512696 Jy ! Component: 2150 - total flux cleaned = 0.00520567 Jy ! Component: 2200 - total flux cleaned = 0.0053225 Jy ! Component: 2250 - total flux cleaned = 0.00538033 Jy ! Component: 2300 - total flux cleaned = 0.00541862 Jy ! Component: 2350 - total flux cleaned = 0.00551355 Jy ! Component: 2400 - total flux cleaned = 0.00555178 Jy ! Component: 2450 - total flux cleaned = 0.0056456 Jy ! Component: 2500 - total flux cleaned = 0.0057012 Jy ! Component: 2550 - total flux cleaned = 0.0057932 Jy ! Component: 2600 - total flux cleaned = 0.00584783 Jy ! Component: 2650 - total flux cleaned = 0.00586583 Jy ! Component: 2700 - total flux cleaned = 0.00593807 Jy ! Component: 2750 - total flux cleaned = 0.00601016 Jy ! Component: 2800 - total flux cleaned = 0.00611707 Jy ! Component: 2850 - total flux cleaned = 0.00611715 Jy ! Component: 2900 - total flux cleaned = 0.00611721 Jy ! Component: 2950 - total flux cleaned = 0.00623945 Jy ! Component: 3000 - total flux cleaned = 0.00629157 Jy ! Component: 3050 - total flux cleaned = 0.00634313 Jy ! Component: 3100 - total flux cleaned = 0.0064803 Jy ! Component: 3150 - total flux cleaned = 0.00648007 Jy ! Component: 3200 - total flux cleaned = 0.00654789 Jy ! Component: 3250 - total flux cleaned = 0.00664892 Jy ! Component: 3300 - total flux cleaned = 0.00666573 Jy ! Component: 3350 - total flux cleaned = 0.00676526 Jy ! Component: 3400 - total flux cleaned = 0.00683134 Jy ! Component: 3450 - total flux cleaned = 0.00689692 Jy ! Component: 3500 - total flux cleaned = 0.00688068 Jy ! Component: 3550 - total flux cleaned = 0.00696192 Jy ! Component: 3600 - total flux cleaned = 0.00697806 Jy ! Component: 3650 - total flux cleaned = 0.00697816 Jy ! Component: 3700 - total flux cleaned = 0.00705812 Jy ! Component: 3750 - total flux cleaned = 0.00710583 Jy ! Component: 3800 - total flux cleaned = 0.00709007 Jy ! Component: 3850 - total flux cleaned = 0.00716869 Jy ! Component: 3900 - total flux cleaned = 0.00720002 Jy ! Component: 3950 - total flux cleaned = 0.00724651 Jy ! Component: 4000 - total flux cleaned = 0.00724657 Jy ! Component: 4050 - total flux cleaned = 0.00727737 Jy ! Total flux subtracted in 4096 components = 0.00729264 Jy ! Clean residual min=-0.000854 max=0.000954 Jy/beam ! Clean residual mean=0.000003 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.163529 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 421 components and 0.163529 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0953+3225_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 5.664 at 4.09 degrees (North through East) ! Clean map min=-0.0014662 max=0.1365 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0953+3225_S_map.fits wmodel /scr/pima/rv119_uvs/J0953+3225_S_map.mod ! Writing 421 model components to file: /scr/pima/rv119_uvs/J0953+3225_S_map.mod wobs /scr/pima/rv119_uvs/J0953+3225_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0953+3225_S_uvs.fits wwins /scr/pima/rv119_uvs/J0953+3225_S_map.win ! wwins: Wrote 6 windows to /scr/pima/rv119_uvs/J0953+3225_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.136501 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000272554 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.599014 0.599014 1.19803 2.39606 4.79211 9.58423 19.1685 38.3369 76.6738 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.136 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 500.822 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0953+3225_S_dfm.log closed on Sun Dec 17 11:35:43 2017