! Started logfile: /scr/pima/rv119_uvs/J0811+0146_X_dfm.log on Sun Dec 17 11:34:21 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv119_uvs/J0811+0146_X_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0811+0146_X_uva.fits ! AN table 1: 33 integrations on 78 of 78 possible baselines. ! AN table 2: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.273229 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0811+0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3364 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0811+0146_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 299 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 299 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 299 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 299 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.253757Jy sigma=15.608431 ! Fit after self-cal, rms=0.283316Jy sigma=3.606080 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.5974 mas, bmaj=0.9956 mas, bpa=-5.35 degrees ! Estimated noise=1.4264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.578404 Jy ! Component: 100 - total flux cleaned = 0.704535 Jy ! Total flux subtracted in 100 components = 0.704535 Jy ! Clean residual min=-0.016339 max=0.035177 Jy/beam ! Clean residual mean=0.000003 rms=0.002767 Jy/beam ! Combined flux in latest and established models = 0.704535 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.704535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153328Jy sigma=1.361016 ! Fit after self-cal, rms=0.153325Jy sigma=1.361001 ! Inverting map ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233794 Jy ! Component: 100 - total flux cleaned = 0.0224379 Jy ! Total flux subtracted in 100 components = 0.0224379 Jy ! Clean residual min=-0.014938 max=0.018138 Jy/beam ! Clean residual mean=0.000004 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.726973 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.726973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139920Jy sigma=1.252766 ! Fit after self-cal, rms=0.139850Jy sigma=1.251935 ! Inverting map ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (0, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584034 Jy ! Component: 100 - total flux cleaned = 0.00659036 Jy ! Total flux subtracted in 100 components = 0.00659036 Jy ! Clean residual min=-0.013542 max=0.015391 Jy/beam ! Clean residual mean=0.000004 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 0.733563 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.733563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132456Jy sigma=1.207780 ! Fit after self-cal, rms=0.132423Jy sigma=1.207171 ! Inverting map ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (0.4, 3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398099 Jy ! Component: 100 - total flux cleaned = 0.004637 Jy ! Total flux subtracted in 100 components = 0.004637 Jy ! Clean residual min=-0.012477 max=0.013848 Jy/beam ! Clean residual mean=0.000004 rms=0.002253 Jy/beam ! Combined flux in latest and established models = 0.7382 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.7382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128206Jy sigma=1.179721 ! Fit after self-cal, rms=0.128178Jy sigma=1.179442 ! Inverting map ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec ! Added new window around map position (-0.4, -3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479194 Jy ! Component: 100 - total flux cleaned = 0.00588924 Jy ! Total flux subtracted in 100 components = 0.00588924 Jy ! Clean residual min=-0.011542 max=0.012606 Jy/beam ! Clean residual mean=0.000005 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.744089 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.744089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124980Jy sigma=1.157660 ! Fit after self-cal, rms=0.124939Jy sigma=1.157329 ! Inverting map ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec ! Estimated beam: bmin=0.6683 mas, bmaj=1.149 mas, bpa=-7.296 degrees ! Estimated noise=1.20398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143771 Jy ! Component: 100 - total flux cleaned = 0.00143569 Jy ! Component: 150 - total flux cleaned = 0.00144638 Jy ! Component: 200 - total flux cleaned = 0.00143677 Jy ! Total flux subtracted in 200 components = 0.00143677 Jy ! Clean residual min=-0.009180 max=0.010595 Jy/beam ! Clean residual mean=0.000002 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 0.745526 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.745526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121408Jy sigma=1.136982 ! Fit after self-cal, rms=0.121352Jy sigma=1.136607 ! Inverting map ! Your choice of large map pixels excluded 9.21% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1881 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6683 x 1.149 at -7.296 degrees (North through East) ! Clean map min=-0.0084216 max=0.73642 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HH 0.83 HN 1.00 ! KP 1.02 LA 0.99 NL 1.00 NY 1.02 ! ON 1.01 OV 0.97 PT 1.00 SC 0.99 ! WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.96 KP 0.98 LA 0.97 ! MK 0.99 NL 1.07 OV 0.97 PT 1.01 ! SC 1.02 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HH 0.84 HN 1.02 ! KP 1.02 LA 0.99 NL 0.99 NY 1.00 ! ON 0.98 OV 0.96 PT 1.01 SC 1.00 ! WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.97 KP 0.98 LA 0.97 ! MK 0.99 NL 1.06 OV 0.98 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HH 0.90 HN 0.99 ! KP 1.02 LA 0.98 NL 1.00 NY 1.03 ! ON 1.02 OV 0.98 PT 1.02 SC 0.99 ! WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.93 KP 1.00 LA 0.97 ! MK 0.99 NL 1.07 OV 0.97 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HH 1.07 HN 1.00 ! KP 1.01 LA 1.00 NL 1.02 NY 1.00 ! ON 1.00 OV 0.98 PT 1.01 SC 0.97 ! WZ 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.95 KP 0.99 LA 0.97 ! MK 0.99 NL 1.08 OV 0.98 PT 1.02 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.121352Jy sigma=1.136607 ! Fit after self-cal, rms=0.102894Jy sigma=1.031443 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.6618 mas, bmaj=1.141 mas, bpa=-5.384 degrees ! Estimated noise=1.20803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00343701 Jy ! Component: 100 - total flux cleaned = -0.00376081 Jy ! Component: 150 - total flux cleaned = -0.00420503 Jy ! Component: 200 - total flux cleaned = -0.00433937 Jy ! Total flux subtracted in 200 components = -0.00433937 Jy ! Clean residual min=-0.007776 max=0.007510 Jy/beam ! Clean residual mean=0.000001 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.741186 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.741187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102343Jy sigma=1.025099 ! Fit after self-cal, rms=0.102291Jy sigma=1.024832 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102291Jy sigma=1.024832 ! Fit after self-cal, rms=0.098125Jy sigma=0.940895 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.6616 mas, bmaj=1.138 mas, bpa=-5.318 degrees ! Estimated noise=1.20659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000557506 Jy ! Component: 100 - total flux cleaned = -0.00114486 Jy ! Component: 150 - total flux cleaned = -0.00135549 Jy ! Component: 200 - total flux cleaned = -0.00145353 Jy ! Total flux subtracted in 200 components = -0.00145353 Jy ! Clean residual min=-0.005945 max=0.006337 Jy/beam ! Clean residual mean=-0.000001 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.739733 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.739733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097888Jy sigma=0.938919 ! Fit after self-cal, rms=0.097859Jy sigma=0.938757 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.8, -48.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342006 Jy ! Component: 100 - total flux cleaned = 0.003781 Jy ! Component: 150 - total flux cleaned = 0.00400267 Jy ! Component: 200 - total flux cleaned = 0.00400246 Jy ! Total flux subtracted in 200 components = 0.00400246 Jy ! Clean residual min=-0.005806 max=0.005988 Jy/beam ! Clean residual mean=-0.000001 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.743735 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.743735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097458Jy sigma=0.934890 ! Fit after self-cal, rms=0.097430Jy sigma=0.934517 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Added new window around map position (-26.8, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528333 Jy ! Component: 100 - total flux cleaned = 0.00623603 Jy ! Component: 150 - total flux cleaned = 0.00663284 Jy ! Component: 200 - total flux cleaned = 0.00690862 Jy ! Total flux subtracted in 200 components = 0.00690862 Jy ! Clean residual min=-0.005705 max=0.005713 Jy/beam ! Clean residual mean=-0.000001 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.750644 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.750644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096982Jy sigma=0.930298 ! Fit after self-cal, rms=0.096952Jy sigma=0.929995 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096952Jy sigma=0.929995 ! Fit after self-cal, rms=0.092427Jy sigma=0.865965 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.661 mas, bmaj=1.136 mas, bpa=-5.306 degrees ! Estimated noise=1.20852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918825 Jy ! Component: 100 - total flux cleaned = 0.00109592 Jy ! Component: 150 - total flux cleaned = 0.00133664 Jy ! Component: 200 - total flux cleaned = 0.00163676 Jy ! Total flux subtracted in 200 components = 0.00163676 Jy ! Clean residual min=-0.004383 max=0.004110 Jy/beam ! Clean residual mean=0.000002 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.752281 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.752281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092255Jy sigma=0.864193 ! Fit after self-cal, rms=0.092255Jy sigma=0.864092 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.36748e-05 Jy ! Component: 100 - total flux cleaned = 1.65552e-05 Jy ! Component: 150 - total flux cleaned = 0.000145037 Jy ! Component: 200 - total flux cleaned = 0.000206752 Jy ! Total flux subtracted in 200 components = 0.000206752 Jy ! Clean residual min=-0.004327 max=0.004079 Jy/beam ! Clean residual mean=0.000002 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.752487 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 0.752487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092135Jy sigma=0.863133 ! Fit after self-cal, rms=0.092131Jy sigma=0.863115 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092131Jy sigma=0.863115 ! Fit after self-cal, rms=0.092118Jy sigma=0.862895 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=2.503 mas, bmaj=3.051 mas, bpa=-8.11 degrees ! Estimated noise=1.58386 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083477 Jy ! Component: 100 - total flux cleaned = 0.0010189 Jy ! Component: 150 - total flux cleaned = 0.00113488 Jy ! Component: 200 - total flux cleaned = 0.00124465 Jy ! Total flux subtracted in 200 components = 0.00124465 Jy ! Clean residual min=-0.004626 max=0.004160 Jy/beam ! Clean residual mean=0.000004 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.753732 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.753732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092114Jy sigma=0.862788 ! Fit after self-cal, rms=0.092113Jy sigma=0.862740 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188668 Jy ! Component: 100 - total flux cleaned = 0.000187417 Jy ! Component: 150 - total flux cleaned = 0.0002195 Jy ! Component: 200 - total flux cleaned = 0.00024949 Jy ! Total flux subtracted in 200 components = 0.00024949 Jy ! Clean residual min=-0.004631 max=0.004194 Jy/beam ! Clean residual mean=0.000004 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.753981 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.753981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092122Jy sigma=0.862776 ! Fit after self-cal, rms=0.092119Jy sigma=0.862754 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.6607 mas, bmaj=1.135 mas, bpa=-5.281 degrees ! Estimated noise=1.20946 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6607 x 1.135 at -5.281 degrees (North through East) ! Clean map min=-0.0073693 max=0.73325 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092119Jy sigma=0.862754 ! Fit after self-cal, rms=0.086054Jy sigma=0.781368 ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.661 mas, bmaj=1.136 mas, bpa=-5.335 degrees ! Estimated noise=1.20935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674997 Jy ! Component: 100 - total flux cleaned = 0.000810281 Jy ! Component: 150 - total flux cleaned = 0.000746354 Jy ! Component: 200 - total flux cleaned = 0.000572252 Jy ! Total flux subtracted in 200 components = 0.000572252 Jy ! Clean residual min=-0.004117 max=0.003957 Jy/beam ! Clean residual mean=0.000001 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.754554 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.754554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085932Jy sigma=0.780347 ! Fit after self-cal, rms=0.085925Jy sigma=0.780314 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.78259e-05 Jy ! Component: 100 - total flux cleaned = 1.24528e-05 Jy ! Component: 150 - total flux cleaned = -9.4617e-05 Jy ! Component: 200 - total flux cleaned = -0.000195563 Jy ! Total flux subtracted in 200 components = -0.000195563 Jy ! Clean residual min=-0.004070 max=0.003941 Jy/beam ! Clean residual mean=0.000001 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.754358 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 0.754358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085843Jy sigma=0.779607 ! Fit after self-cal, rms=0.085840Jy sigma=0.779594 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085840Jy sigma=0.779594 ! Fit after self-cal, rms=0.085831Jy sigma=0.779497 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.5889 mas, bmaj=1.006 mas, bpa=-3.131 degrees ! Estimated noise=1.41501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.571276 Jy ! Component: 100 - total flux cleaned = 0.695851 Jy ! Component: 150 - total flux cleaned = 0.72786 Jy ! Component: 200 - total flux cleaned = 0.735191 Jy ! Total flux subtracted in 200 components = 0.735191 Jy ! Clean residual min=-0.009682 max=0.010808 Jy/beam ! Clean residual mean=0.000001 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.735191 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.735191 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.6608 mas, bmaj=1.136 mas, bpa=-5.32 degrees ! Estimated noise=1.20993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380616 Jy ! Component: 100 - total flux cleaned = 0.00521644 Jy ! Component: 150 - total flux cleaned = 0.00650722 Jy ! Component: 200 - total flux cleaned = 0.0076787 Jy ! Total flux subtracted in 200 components = 0.0076787 Jy ! Clean residual min=-0.005879 max=0.005895 Jy/beam ! Clean residual mean=0.000001 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.74287 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.74287 Jy ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Added new window around map position (-1, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000964696 Jy ! Component: 100 - total flux cleaned = 0.00175241 Jy ! Component: 150 - total flux cleaned = 0.00273593 Jy ! Component: 200 - total flux cleaned = 0.00365454 Jy ! Total flux subtracted in 200 components = 0.00365454 Jy ! Clean residual min=-0.004932 max=0.004652 Jy/beam ! Clean residual mean=0.000001 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.746525 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.746525 Jy ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=2.503 mas, bmaj=3.05 mas, bpa=-8.201 degrees ! Estimated noise=1.58517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344956 Jy ! Component: 100 - total flux cleaned = 0.0048132 Jy ! Component: 150 - total flux cleaned = 0.00551972 Jy ! Component: 200 - total flux cleaned = 0.00614772 Jy ! Total flux subtracted in 200 components = 0.00614772 Jy ! Clean residual min=-0.004661 max=0.003973 Jy/beam ! Clean residual mean=0.000003 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.752672 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057117 Jy ! Component: 100 - total flux cleaned = 0.00115125 Jy ! Component: 150 - total flux cleaned = 0.00144757 Jy ! Component: 200 - total flux cleaned = 0.00166851 Jy ! Total flux subtracted in 200 components = 0.00166851 Jy ! Clean residual min=-0.004624 max=0.004070 Jy/beam ! Clean residual mean=0.000003 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.754341 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 57 components and 0.754341 Jy ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! Estimated beam: bmin=0.6608 mas, bmaj=1.136 mas, bpa=-5.32 degrees ! Estimated noise=1.20993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000742064 Jy ! Component: 100 - total flux cleaned = -0.000754428 Jy ! Component: 150 - total flux cleaned = -0.000954507 Jy ! Component: 200 - total flux cleaned = -0.000956294 Jy ! Total flux subtracted in 200 components = -0.000956294 Jy ! Clean residual min=-0.004307 max=0.004313 Jy/beam ! Clean residual mean=0.000001 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.753385 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.753385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090252Jy sigma=0.812144 ! Fit after self-cal, rms=0.090079Jy sigma=0.810477 wmodel J0811+0146_X_map.mod ! Writing 60 model components to file: J0811+0146_X_map.mod wobs J0811+0146_X_uvs.fits ! Writing UV FITS file: J0811+0146_X_uvs.fits wwins J0811+0146_X_map.win ! wwins: Wrote 7 windows to J0811+0146_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000496859 Jy ! Component: 100 - total flux cleaned = -0.000656239 Jy ! Component: 150 - total flux cleaned = -0.00065794 Jy ! Component: 200 - total flux cleaned = -0.000657604 Jy ! Component: 250 - total flux cleaned = -0.000584734 Jy ! Component: 300 - total flux cleaned = -0.000656649 Jy ! Component: 350 - total flux cleaned = -0.000939349 Jy ! Component: 400 - total flux cleaned = -0.0010087 Jy ! Component: 450 - total flux cleaned = -0.00121609 Jy ! Component: 500 - total flux cleaned = -0.00135287 Jy ! Component: 550 - total flux cleaned = -0.00148779 Jy ! Component: 600 - total flux cleaned = -0.00195249 Jy ! Component: 650 - total flux cleaned = -0.00188602 Jy ! Component: 700 - total flux cleaned = -0.00195092 Jy ! Component: 750 - total flux cleaned = -0.0021444 Jy ! Component: 800 - total flux cleaned = -0.00220865 Jy ! Component: 850 - total flux cleaned = -0.00252459 Jy ! Component: 900 - total flux cleaned = -0.00246184 Jy ! Component: 950 - total flux cleaned = -0.00271163 Jy ! Component: 1000 - total flux cleaned = -0.00264911 Jy ! Component: 1050 - total flux cleaned = -0.00252662 Jy ! Component: 1100 - total flux cleaned = -0.0027707 Jy ! Component: 1150 - total flux cleaned = -0.00295179 Jy ! Component: 1200 - total flux cleaned = -0.00295166 Jy ! Component: 1250 - total flux cleaned = -0.00301174 Jy ! Component: 1300 - total flux cleaned = -0.00318899 Jy ! Component: 1350 - total flux cleaned = -0.00324772 Jy ! Component: 1400 - total flux cleaned = -0.00324761 Jy ! Component: 1450 - total flux cleaned = -0.00336358 Jy ! Component: 1500 - total flux cleaned = -0.00336391 Jy ! Component: 1550 - total flux cleaned = -0.00359232 Jy ! Component: 1600 - total flux cleaned = -0.00370605 Jy ! Component: 1650 - total flux cleaned = -0.00370574 Jy ! Component: 1700 - total flux cleaned = -0.00381803 Jy ! Component: 1750 - total flux cleaned = -0.00392947 Jy ! Component: 1800 - total flux cleaned = -0.00415144 Jy ! Component: 1850 - total flux cleaned = -0.00420658 Jy ! Component: 1900 - total flux cleaned = -0.00437103 Jy ! Component: 1950 - total flux cleaned = -0.00464454 Jy ! Component: 2000 - total flux cleaned = -0.00442716 Jy ! Component: 2050 - total flux cleaned = -0.00453542 Jy ! Component: 2100 - total flux cleaned = -0.00464268 Jy ! Component: 2150 - total flux cleaned = -0.00480277 Jy ! Component: 2200 - total flux cleaned = -0.0049092 Jy ! Component: 2250 - total flux cleaned = -0.00506828 Jy ! Component: 2300 - total flux cleaned = -0.00501526 Jy ! Component: 2350 - total flux cleaned = -0.0049101 Jy ! Component: 2400 - total flux cleaned = -0.00517117 Jy ! Component: 2450 - total flux cleaned = -0.00517124 Jy ! Component: 2500 - total flux cleaned = -0.00542973 Jy ! Component: 2550 - total flux cleaned = -0.00573858 Jy ! Component: 2600 - total flux cleaned = -0.00548235 Jy ! Component: 2650 - total flux cleaned = -0.00573704 Jy ! Component: 2700 - total flux cleaned = -0.00599046 Jy ! Component: 2750 - total flux cleaned = -0.00604119 Jy ! Component: 2800 - total flux cleaned = -0.00604149 Jy ! Component: 2850 - total flux cleaned = -0.00634211 Jy ! Component: 2900 - total flux cleaned = -0.00644182 Jy ! Component: 2950 - total flux cleaned = -0.00644213 Jy ! Component: 3000 - total flux cleaned = -0.00659085 Jy ! Component: 3050 - total flux cleaned = -0.00659108 Jy ! Component: 3100 - total flux cleaned = -0.00693387 Jy ! Component: 3150 - total flux cleaned = -0.00703157 Jy ! Component: 3200 - total flux cleaned = -0.00683731 Jy ! Component: 3250 - total flux cleaned = -0.00703126 Jy ! Component: 3300 - total flux cleaned = -0.00736861 Jy ! Component: 3350 - total flux cleaned = -0.00741652 Jy ! Component: 3400 - total flux cleaned = -0.00755994 Jy ! Component: 3450 - total flux cleaned = -0.007417 Jy ! Component: 3500 - total flux cleaned = -0.00765429 Jy ! Component: 3550 - total flux cleaned = -0.00765494 Jy ! Component: 3600 - total flux cleaned = -0.00798456 Jy ! Component: 3650 - total flux cleaned = -0.00793771 Jy ! Component: 3700 - total flux cleaned = -0.00784441 Jy ! Component: 3750 - total flux cleaned = -0.00812338 Jy ! Component: 3800 - total flux cleaned = -0.00835489 Jy ! Component: 3850 - total flux cleaned = -0.00853952 Jy ! Component: 3900 - total flux cleaned = -0.00840162 Jy ! Component: 3950 - total flux cleaned = -0.00863056 Jy ! Component: 4000 - total flux cleaned = -0.00881286 Jy ! Component: 4050 - total flux cleaned = -0.00899505 Jy ! Total flux subtracted in 4096 components = -0.00908555 Jy ! Clean residual min=-0.002652 max=0.002951 Jy/beam ! Clean residual mean=0.000001 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.744299 Jy keep ! Adding 351 model components to the UV plane model. ! The established model now contains 408 components and 0.744298 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0811+0146_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6608 x 1.136 at -5.32 degrees (North through East) ! Clean map min=-0.0057448 max=0.72877 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0811+0146_X_map.fits wmodel /scr/pima/rv119_uvs/J0811+0146_X_map.mod ! Writing 408 model components to file: /scr/pima/rv119_uvs/J0811+0146_X_map.mod wobs /scr/pima/rv119_uvs/J0811+0146_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0811+0146_X_uvs.fits wwins /scr/pima/rv119_uvs/J0811+0146_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv119_uvs/J0811+0146_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.728767 invert ! Inverting map ! Your choice of large map pixels excluded 8.98% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1885 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000735857 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.302918 0.302918 0.605837 1.21167 2.42335 4.84669 9.69339 19.3868 38.7735 77.5471 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.728 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 990.366 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0811+0146_X_dfm.log closed on Sun Dec 17 11:34:26 2017