! Started logfile: /scr/pima/rv119_uvs/J0755+2542_S_dfm.log on Sun Dec 17 11:35:09 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J0755+2542_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J0755+2542_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.769697 visibilities/baseline/integration-bin.
! Found source: J0755+2542
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 6096 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0755+2542_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004853Jy  sigma=19.831438
! Fit after  self-cal, rms=0.971741Jy  sigma=19.231007
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.146 mas, bmaj=6.904 mas, bpa=20.38 degrees
! Estimated noise=0.796598 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024155 Jy
! Component: 100  -  total flux cleaned = 0.0251873 Jy
! Total flux subtracted in 100 components = 0.0251873 Jy
! Clean residual min=-0.006417 max=0.006469 Jy/beam
! Clean residual mean=0.000005 rms=0.001828 Jy/beam
! Combined flux in latest and established models = 0.0251873 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0251873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075508Jy  sigma=1.168162
! Fit after  self-cal, rms=0.073916Jy  sigma=1.128316
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.992 mas, bmaj=7.694 mas, bpa=18.96 degrees
! Estimated noise=0.493513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00456361 Jy
! Component: 100  -  total flux cleaned = 0.00444096 Jy
! Component: 150  -  total flux cleaned = 0.00443997 Jy
! Component: 200  -  total flux cleaned = 0.00471106 Jy
! Total flux subtracted in 200 components = 0.00471106 Jy
! Clean residual min=-0.004176 max=0.003703 Jy/beam
! Clean residual mean=0.000009 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.0298983 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.0298983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073200Jy  sigma=1.119241
! Fit after  self-cal, rms=0.073216Jy  sigma=1.118898
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.992 x 7.694 at 18.96 degrees (North through East)
! Clean map  min=-0.0039962  max=0.034266 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.21     HN        1.03     KP        1.00     
!   LA        0.98     MK        1.10     NL        1.18     OV        1.22     
!   PT        1.06     SC        1.53     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.11     KP        1.08     
!   LA        0.95     MK        1.00     NL        1.04     OV        0.93     
!   PT        1.05     SC        1.41     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.16     HN        1.27     KP        0.31     
!   LA        0.99     MK        0.70     NL        1.00*    OV        1.35     
!   PT        1.13     SC        0.29     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.03     HN        1.04     KP        0.96     
!   LA        1.00     MK        0.98     NL        0.93     OV        1.14     
!   PT        1.00     SC        1.27     
! 
! 
! Fit before self-cal, rms=0.073216Jy  sigma=1.118898
! Fit after  self-cal, rms=0.051186Jy  sigma=1.016678
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.636 mas, bmaj=7.807 mas, bpa=21.23 degrees
! Estimated noise=0.480707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495528 Jy
! Component: 100  -  total flux cleaned = 0.000595342 Jy
! Component: 150  -  total flux cleaned = 0.000596041 Jy
! Component: 200  -  total flux cleaned = 0.000596679 Jy
! Total flux subtracted in 200 components = 0.000596679 Jy
! Clean residual min=-0.001824 max=0.001829 Jy/beam
! Clean residual mean=0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.030495 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.030495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051171Jy  sigma=1.016059
! Fit after  self-cal, rms=0.052322Jy  sigma=0.993438
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052322Jy  sigma=0.993438
! Fit after  self-cal, rms=0.066572Jy  sigma=0.978298
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.546 mas, bmaj=7.893 mas, bpa=22.36 degrees
! Estimated noise=0.492895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.82277e-05 Jy
! Component: 100  -  total flux cleaned = -3.54646e-05 Jy
! Component: 150  -  total flux cleaned = 1.68437e-05 Jy
! Component: 200  -  total flux cleaned = 4.61323e-05 Jy
! Total flux subtracted in 200 components = 4.61323e-05 Jy
! Clean residual min=-0.001761 max=0.002168 Jy/beam
! Clean residual mean=-0.000000 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0305411 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 0.0305411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066556Jy  sigma=0.978108
! Fit after  self-cal, rms=0.067309Jy  sigma=0.973471
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.5, 20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110821 Jy
! Component: 100  -  total flux cleaned = 0.000561821 Jy
! Component: 150  -  total flux cleaned = 0.000179215 Jy
! Component: 200  -  total flux cleaned = 4.1932e-05 Jy
! Total flux subtracted in 200 components = 4.1932e-05 Jy
! Clean residual min=-0.001675 max=0.001694 Jy/beam
! Clean residual mean=-0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0305831 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 62 components and 0.0305831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067217Jy  sigma=0.972426
! Fit after  self-cal, rms=0.067222Jy  sigma=0.971968
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067222Jy  sigma=0.971968
! Fit after  self-cal, rms=0.093454Jy  sigma=0.970930
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.536 mas, bmaj=7.97 mas, bpa=22.39 degrees
! Estimated noise=0.512864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000845091 Jy
! Component: 100  -  total flux cleaned = 0.000918961 Jy
! Component: 150  -  total flux cleaned = 0.00104641 Jy
! Component: 200  -  total flux cleaned = 0.001103 Jy
! Total flux subtracted in 200 components = 0.001103 Jy
! Clean residual min=-0.001910 max=0.001562 Jy/beam
! Clean residual mean=-0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0316861 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.0316861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093415Jy  sigma=0.970315
! Fit after  self-cal, rms=0.093744Jy  sigma=0.969445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.65778e-06 Jy
! Component: 100  -  total flux cleaned = -7.48537e-06 Jy
! Component: 150  -  total flux cleaned = 4.41296e-05 Jy
! Component: 200  -  total flux cleaned = 4.44566e-05 Jy
! Total flux subtracted in 200 components = 4.44566e-05 Jy
! Clean residual min=-0.001862 max=0.001617 Jy/beam
! Clean residual mean=-0.000002 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.0317305 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.0317305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093717Jy  sigma=0.969268
! Fit after  self-cal, rms=0.093717Jy  sigma=0.969160
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093717Jy  sigma=0.969160
! Fit after  self-cal, rms=0.116403Jy  sigma=0.968939
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.226 mas, bmaj=9.859 mas, bpa=8.625 degrees
! Estimated noise=0.653759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000815484 Jy
! Component: 100  -  total flux cleaned = 0.00104506 Jy
! Component: 150  -  total flux cleaned = 0.00113614 Jy
! Component: 200  -  total flux cleaned = 0.00117486 Jy
! Total flux subtracted in 200 components = 0.00117486 Jy
! Clean residual min=-0.001924 max=0.001786 Jy/beam
! Clean residual mean=-0.000002 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.0329054 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 104 components and 0.0329054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116393Jy  sigma=0.968726
! Fit after  self-cal, rms=0.116501Jy  sigma=0.968489
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257228 Jy
! Component: 100  -  total flux cleaned = 0.000238024 Jy
! Component: 150  -  total flux cleaned = 0.000252637 Jy
! Component: 200  -  total flux cleaned = 0.000280787 Jy
! Total flux subtracted in 200 components = 0.000280787 Jy
! Clean residual min=-0.001890 max=0.001721 Jy/beam
! Clean residual mean=-0.000002 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.0331862 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.0331862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116493Jy  sigma=0.968527
! Fit after  self-cal, rms=0.116496Jy  sigma=0.968479
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=8.008 mas, bpa=22.35 degrees
! Estimated noise=0.523662 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.519 x 8.008 at 22.35 degrees (North through East)
! Clean map  min=-0.0025592  max=0.033783 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.789 mas, bmaj=7.296 mas, bpa=21.79 degrees
! Estimated noise=0.849183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278057 Jy
! Component: 100  -  total flux cleaned = 0.0318412 Jy
! Component: 150  -  total flux cleaned = 0.0320904 Jy
! Component: 200  -  total flux cleaned = 0.0320984 Jy
! Total flux subtracted in 200 components = 0.0320984 Jy
! Clean residual min=-0.003247 max=0.002939 Jy/beam
! Clean residual mean=0.000005 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.0320984 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0320984 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=8.008 mas, bpa=22.35 degrees
! Estimated noise=0.523662 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.71098e-06 Jy
! Component: 100  -  total flux cleaned = -9.8627e-06 Jy
! Component: 150  -  total flux cleaned = 0.000103886 Jy
! Component: 200  -  total flux cleaned = 0.000153573 Jy
! Total flux subtracted in 200 components = 0.000153573 Jy
! Clean residual min=-0.002094 max=0.001684 Jy/beam
! Clean residual mean=-0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.032252 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.032252 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.226 mas, bmaj=9.859 mas, bpa=8.625 degrees
! Estimated noise=0.653759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498341 Jy
! Component: 100  -  total flux cleaned = 0.000642744 Jy
! Component: 150  -  total flux cleaned = 0.00064576 Jy
! Component: 200  -  total flux cleaned = 0.000644779 Jy
! Total flux subtracted in 200 components = 0.000644779 Jy
! Clean residual min=-0.001905 max=0.001699 Jy/beam
! Clean residual mean=-0.000003 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.0328968 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.08885e-05 Jy
! Component: 100  -  total flux cleaned = 7.9872e-05 Jy
! Component: 150  -  total flux cleaned = 0.000115838 Jy
! Component: 200  -  total flux cleaned = 0.000149736 Jy
! Total flux subtracted in 200 components = 0.000149736 Jy
! Clean residual min=-0.001888 max=0.001702 Jy/beam
! Clean residual mean=-0.000003 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.0330465 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 0.0330465 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=8.008 mas, bpa=22.35 degrees
! Estimated noise=0.523662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.71167e-05 Jy
! Component: 100  -  total flux cleaned = -0.000132132 Jy
! Component: 150  -  total flux cleaned = -0.000132117 Jy
! Component: 200  -  total flux cleaned = -2.02772e-05 Jy
! Total flux subtracted in 200 components = -2.02772e-05 Jy
! Clean residual min=-0.001909 max=0.001611 Jy/beam
! Clean residual mean=-0.000002 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0330263 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.0330262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116510Jy  sigma=0.968929
! Fit after  self-cal, rms=0.116510Jy  sigma=0.968596
wmodel J0755+2542_S_map.mod
! Writing 64 model components to file: J0755+2542_S_map.mod
wobs   J0755+2542_S_uvs.fits
! Writing UV FITS file: J0755+2542_S_uvs.fits
wwins  J0755+2542_S_map.win
! wwins: Wrote 2 windows to J0755+2542_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000714578 Jy
! Component: 100  -  total flux cleaned = -0.00112137 Jy
! Component: 150  -  total flux cleaned = -0.00134017 Jy
! Component: 200  -  total flux cleaned = -0.00152558 Jy
! Component: 250  -  total flux cleaned = -0.00170474 Jy
! Component: 300  -  total flux cleaned = -0.00180414 Jy
! Component: 350  -  total flux cleaned = -0.00185315 Jy
! Component: 400  -  total flux cleaned = -0.00192466 Jy
! Component: 450  -  total flux cleaned = -0.00204051 Jy
! Component: 500  -  total flux cleaned = -0.00215363 Jy
! Component: 550  -  total flux cleaned = -0.00219785 Jy
! Component: 600  -  total flux cleaned = -0.00226373 Jy
! Component: 650  -  total flux cleaned = -0.00237157 Jy
! Component: 700  -  total flux cleaned = -0.00239267 Jy
! Component: 750  -  total flux cleaned = -0.00245529 Jy
! Component: 800  -  total flux cleaned = -0.00247613 Jy
! Component: 850  -  total flux cleaned = -0.00247627 Jy
! Component: 900  -  total flux cleaned = -0.00259666 Jy
! Component: 950  -  total flux cleaned = -0.00259676 Jy
! Component: 1000  -  total flux cleaned = -0.00269464 Jy
! Component: 1050  -  total flux cleaned = -0.00275285 Jy
! Component: 1100  -  total flux cleaned = -0.00282935 Jy
! Component: 1150  -  total flux cleaned = -0.00292369 Jy
! Component: 1200  -  total flux cleaned = -0.00296106 Jy
! Component: 1250  -  total flux cleaned = -0.00303476 Jy
! Component: 1300  -  total flux cleaned = -0.00308956 Jy
! Component: 1350  -  total flux cleaned = -0.00312572 Jy
! Component: 1400  -  total flux cleaned = -0.00317948 Jy
! Component: 1450  -  total flux cleaned = -0.00326856 Jy
! Component: 1500  -  total flux cleaned = -0.00337399 Jy
! Component: 1550  -  total flux cleaned = -0.00337394 Jy
! Component: 1600  -  total flux cleaned = -0.00340862 Jy
! Component: 1650  -  total flux cleaned = -0.00347706 Jy
! Component: 1700  -  total flux cleaned = -0.00352778 Jy
! Component: 1750  -  total flux cleaned = -0.0035277 Jy
! Component: 1800  -  total flux cleaned = -0.00359446 Jy
! Component: 1850  -  total flux cleaned = -0.00364394 Jy
! Component: 1900  -  total flux cleaned = -0.0036929 Jy
! Component: 1950  -  total flux cleaned = -0.00369282 Jy
! Component: 2000  -  total flux cleaned = -0.00367667 Jy
! Component: 2050  -  total flux cleaned = -0.00372491 Jy
! Component: 2100  -  total flux cleaned = -0.00377257 Jy
! Component: 2150  -  total flux cleaned = -0.00377235 Jy
! Component: 2200  -  total flux cleaned = -0.00380377 Jy
! Component: 2250  -  total flux cleaned = -0.00377251 Jy
! Component: 2300  -  total flux cleaned = -0.00381917 Jy
! Component: 2350  -  total flux cleaned = -0.00388066 Jy
! Component: 2400  -  total flux cleaned = -0.00388045 Jy
! Component: 2450  -  total flux cleaned = -0.00386533 Jy
! Component: 2500  -  total flux cleaned = -0.00388046 Jy
! Component: 2550  -  total flux cleaned = -0.00389539 Jy
! Component: 2600  -  total flux cleaned = -0.00391038 Jy
! Component: 2650  -  total flux cleaned = -0.00393985 Jy
! Component: 2700  -  total flux cleaned = -0.00392525 Jy
! Component: 2750  -  total flux cleaned = -0.00394002 Jy
! Component: 2800  -  total flux cleaned = -0.00395469 Jy
! Component: 2850  -  total flux cleaned = -0.00404126 Jy
! Component: 2900  -  total flux cleaned = -0.00409842 Jy
! Component: 2950  -  total flux cleaned = -0.00409844 Jy
! Component: 3000  -  total flux cleaned = -0.00415489 Jy
! Component: 3050  -  total flux cleaned = -0.00419712 Jy
! Component: 3100  -  total flux cleaned = -0.00422514 Jy
! Component: 3150  -  total flux cleaned = -0.00426675 Jy
! Component: 3200  -  total flux cleaned = -0.00439092 Jy
! Component: 3250  -  total flux cleaned = -0.00439076 Jy
! Component: 3300  -  total flux cleaned = -0.0043907 Jy
! Component: 3350  -  total flux cleaned = -0.00441781 Jy
! Component: 3400  -  total flux cleaned = -0.00448528 Jy
! Component: 3450  -  total flux cleaned = -0.00451222 Jy
! Component: 3500  -  total flux cleaned = -0.004619 Jy
! Component: 3550  -  total flux cleaned = -0.0046721 Jy
! Component: 3600  -  total flux cleaned = -0.00469848 Jy
! Component: 3650  -  total flux cleaned = -0.0046985 Jy
! Component: 3700  -  total flux cleaned = -0.004816 Jy
! Component: 3750  -  total flux cleaned = -0.00484205 Jy
! Component: 3800  -  total flux cleaned = -0.00490668 Jy
! Component: 3850  -  total flux cleaned = -0.00491964 Jy
! Component: 3900  -  total flux cleaned = -0.00500928 Jy
! Component: 3950  -  total flux cleaned = -0.00504756 Jy
! Component: 4000  -  total flux cleaned = -0.00511112 Jy
! Component: 4050  -  total flux cleaned = -0.00519947 Jy
! Total flux subtracted in 4096 components = -0.00526234 Jy
! Clean residual min=-0.000690 max=0.000943 Jy/beam
! Clean residual mean=-0.000001 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0277639 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 362 components and 0.0277639 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J0755+2542_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.519 x 8.008 at 22.35 degrees (North through East)
! Clean map  min=-0.0024376  max=0.033174 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0755+2542_S_map.fits
wmodel /scr/pima/rv119_uvs/J0755+2542_S_map.mod
! Writing 362 model components to file: /scr/pima/rv119_uvs/J0755+2542_S_map.mod
wobs   /scr/pima/rv119_uvs/J0755+2542_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J0755+2542_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J0755+2542_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv119_uvs/J0755+2542_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0331736 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000238746 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.15906 2.15906 4.31812 8.63623 17.2725 34.5449 69.0899
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.033 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  138.949 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J0755+2542_S_dfm.log closed on Sun Dec 17 11:35:13 2017