! Started logfile: /scr/pima/rv119_uvs/J0642+3509_S_dfm.log on Sun Dec 17 11:34:45 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J0642+3509_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J0642+3509_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.881313 visibilities/baseline/integration-bin.
! Found source: J0642+3509
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 6980 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0642+3509_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013769Jy  sigma=20.150102
! Fit after  self-cal, rms=0.877287Jy  sigma=17.531495
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.706 mas, bmaj=4.624 mas, bpa=0.06743 degrees
! Estimated noise=0.779288 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0940412 Jy
! Component: 100  -  total flux cleaned = 0.115591 Jy
! Total flux subtracted in 100 components = 0.115591 Jy
! Clean residual min=-0.006476 max=0.007976 Jy/beam
! Clean residual mean=0.000008 rms=0.001541 Jy/beam
! Combined flux in latest and established models = 0.115591 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.115591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095581Jy  sigma=1.318013
! Fit after  self-cal, rms=0.095562Jy  sigma=1.317854
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=5.622 mas, bpa=0.08092 degrees
! Estimated noise=0.456957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106858 Jy
! Component: 100  -  total flux cleaned = 0.0152126 Jy
! Component: 150  -  total flux cleaned = 0.017757 Jy
! Component: 200  -  total flux cleaned = 0.0193199 Jy
! Total flux subtracted in 200 components = 0.0193199 Jy
! Clean residual min=-0.003997 max=0.003989 Jy/beam
! Clean residual mean=0.000009 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.134911 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.134911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094103Jy  sigma=1.292968
! Fit after  self-cal, rms=0.094082Jy  sigma=1.292732
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.38 x 5.622 at 0.08092 degrees (North through East)
! Clean map  min=-0.003747  max=0.1234 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.04     NL        1.06     OV        1.00     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.01     OV        1.00     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.02     HN        1.05     KP        0.47     
!   LA        1.06     MK        1.08     NL        1.00*    OV        1.09     
!   PT        1.07     SC        0.64     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.98     KP        1.02     
!   LA        1.03     MK        1.08     NL        1.04     OV        1.00     
!   PT        1.01     SC        1.11     
! 
! 
! Fit before self-cal, rms=0.094082Jy  sigma=1.292732
! Fit after  self-cal, rms=0.057507Jy  sigma=1.208371
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=5.63 mas, bpa=1.334 degrees
! Estimated noise=0.455644 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00066075 Jy
! Component: 100  -  total flux cleaned = 0.000747606 Jy
! Component: 150  -  total flux cleaned = 0.000726321 Jy
! Component: 200  -  total flux cleaned = 0.000681905 Jy
! Total flux subtracted in 200 components = 0.000681905 Jy
! Clean residual min=-0.002208 max=0.002169 Jy/beam
! Clean residual mean=0.000006 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.135593 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.135593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057482Jy  sigma=1.207801
! Fit after  self-cal, rms=0.058095Jy  sigma=1.199928
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058095Jy  sigma=1.199928
! Fit after  self-cal, rms=0.058358Jy  sigma=1.196101
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.343 mas, bmaj=5.625 mas, bpa=1.185 degrees
! Estimated noise=0.456952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565371 Jy
! Component: 100  -  total flux cleaned = 0.000584845 Jy
! Component: 150  -  total flux cleaned = 0.000552037 Jy
! Component: 200  -  total flux cleaned = 0.0005209 Jy
! Total flux subtracted in 200 components = 0.0005209 Jy
! Clean residual min=-0.002324 max=0.002382 Jy/beam
! Clean residual mean=0.000008 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.136113 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.136113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058339Jy  sigma=1.195927
! Fit after  self-cal, rms=0.058617Jy  sigma=1.195483
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.89475e-05 Jy
! Component: 100  -  total flux cleaned = -8.41793e-05 Jy
! Component: 150  -  total flux cleaned = -9.90632e-05 Jy
! Component: 200  -  total flux cleaned = -0.000139694 Jy
! Total flux subtracted in 200 components = -0.000139694 Jy
! Clean residual min=-0.002330 max=0.002431 Jy/beam
! Clean residual mean=0.000008 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.135974 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.135974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058610Jy  sigma=1.195348
! Fit after  self-cal, rms=0.058608Jy  sigma=1.195340
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058608Jy  sigma=1.195340
! Fit after  self-cal, rms=0.058881Jy  sigma=1.195194
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.335 mas, bmaj=5.621 mas, bpa=1.214 degrees
! Estimated noise=0.457847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00059235 Jy
! Component: 100  -  total flux cleaned = 0.000592929 Jy
! Component: 150  -  total flux cleaned = 0.000593124 Jy
! Component: 200  -  total flux cleaned = 0.0005807 Jy
! Total flux subtracted in 200 components = 0.0005807 Jy
! Clean residual min=-0.002324 max=0.002467 Jy/beam
! Clean residual mean=0.000008 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.136554 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.136554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058869Jy  sigma=1.195123
! Fit after  self-cal, rms=0.058943Jy  sigma=1.195092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.16285e-05 Jy
! Component: 100  -  total flux cleaned = 3.79637e-05 Jy
! Component: 150  -  total flux cleaned = 4.53504e-06 Jy
! Component: 200  -  total flux cleaned = -1.60421e-05 Jy
! Total flux subtracted in 200 components = -1.60421e-05 Jy
! Clean residual min=-0.002316 max=0.002477 Jy/beam
! Clean residual mean=0.000008 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.136538 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 34 components and 0.136538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058938Jy  sigma=1.195018
! Fit after  self-cal, rms=0.058937Jy  sigma=1.195012
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058937Jy  sigma=1.195012
! Fit after  self-cal, rms=0.059082Jy  sigma=1.194964
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.975 mas, bmaj=9.071 mas, bpa=2.627 degrees
! Estimated noise=0.605567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.19293e-05 Jy
! Component: 100  -  total flux cleaned = 0.000134451 Jy
! Component: 150  -  total flux cleaned = 0.000154213 Jy
! Component: 200  -  total flux cleaned = 0.000161384 Jy
! Total flux subtracted in 200 components = 0.000161384 Jy
! Clean residual min=-0.002134 max=0.002797 Jy/beam
! Clean residual mean=0.000018 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.1367 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 43 components and 0.1367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059078Jy  sigma=1.195080
! Fit after  self-cal, rms=0.059107Jy  sigma=1.195047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.99015e-05 Jy
! Component: 100  -  total flux cleaned = -5.71754e-05 Jy
! Component: 150  -  total flux cleaned = -3.94623e-05 Jy
! Component: 200  -  total flux cleaned = -3.01722e-05 Jy
! Total flux subtracted in 200 components = -3.01722e-05 Jy
! Clean residual min=-0.002146 max=0.002791 Jy/beam
! Clean residual mean=0.000018 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.13667 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 47 components and 0.13667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059108Jy  sigma=1.195165
! Fit after  self-cal, rms=0.059106Jy  sigma=1.195147
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=5.614 mas, bpa=1.297 degrees
! Estimated noise=0.458632 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.329 x 5.614 at 1.297 degrees (North through East)
! Clean map  min=-0.0021913  max=0.12374 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.664 mas, bmaj=4.598 mas, bpa=1.685 degrees
! Estimated noise=0.782132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0942267 Jy
! Component: 100  -  total flux cleaned = 0.116361 Jy
! Component: 150  -  total flux cleaned = 0.125817 Jy
! Component: 200  -  total flux cleaned = 0.130552 Jy
! Total flux subtracted in 200 components = 0.130552 Jy
! Clean residual min=-0.003880 max=0.003771 Jy/beam
! Clean residual mean=0.000006 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.130552 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.130552 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=5.614 mas, bpa=1.297 degrees
! Estimated noise=0.458632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00303971 Jy
! Component: 100  -  total flux cleaned = 0.00437979 Jy
! Component: 150  -  total flux cleaned = 0.00521116 Jy
! Component: 200  -  total flux cleaned = 0.00569501 Jy
! Total flux subtracted in 200 components = 0.00569501 Jy
! Clean residual min=-0.002302 max=0.002487 Jy/beam
! Clean residual mean=0.000009 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.136247 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.136247 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.975 mas, bmaj=9.071 mas, bpa=2.627 degrees
! Estimated noise=0.605567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232826 Jy
! Component: 100  -  total flux cleaned = 0.000279678 Jy
! Component: 150  -  total flux cleaned = 0.000313808 Jy
! Component: 200  -  total flux cleaned = 0.00032717 Jy
! Total flux subtracted in 200 components = 0.00032717 Jy
! Clean residual min=-0.002171 max=0.002779 Jy/beam
! Clean residual mean=0.000018 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.136574 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.68391e-06 Jy
! Component: 100  -  total flux cleaned = 5.9155e-06 Jy
! Component: 150  -  total flux cleaned = 5.93042e-06 Jy
! Component: 200  -  total flux cleaned = 1.06846e-05 Jy
! Total flux subtracted in 200 components = 1.06846e-05 Jy
! Clean residual min=-0.002172 max=0.002779 Jy/beam
! Clean residual mean=0.000018 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.136585 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 45 components and 0.136585 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=5.614 mas, bpa=1.297 degrees
! Estimated noise=0.458632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251474 Jy
! Component: 100  -  total flux cleaned = 0.000219666 Jy
! Component: 150  -  total flux cleaned = 0.000233071 Jy
! Component: 200  -  total flux cleaned = 0.000244306 Jy
! Total flux subtracted in 200 components = 0.000244306 Jy
! Clean residual min=-0.002289 max=0.002483 Jy/beam
! Clean residual mean=0.000008 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.136829 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 50 components and 0.136829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059103Jy  sigma=1.195133
! Fit after  self-cal, rms=0.059093Jy  sigma=1.195082
wmodel J0642+3509_S_map.mod
! Writing 50 model components to file: J0642+3509_S_map.mod
wobs   J0642+3509_S_uvs.fits
! Writing UV FITS file: J0642+3509_S_uvs.fits
wwins  J0642+3509_S_map.win
! wwins: Wrote 1 windows to J0642+3509_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000928111 Jy
! Component: 100  -  total flux cleaned = 0.00160276 Jy
! Component: 150  -  total flux cleaned = 0.0019637 Jy
! Component: 200  -  total flux cleaned = 0.00227132 Jy
! Component: 250  -  total flux cleaned = 0.00249407 Jy
! Component: 300  -  total flux cleaned = 0.00270932 Jy
! Component: 350  -  total flux cleaned = 0.00288299 Jy
! Component: 400  -  total flux cleaned = 0.00295068 Jy
! Component: 450  -  total flux cleaned = 0.00301609 Jy
! Component: 500  -  total flux cleaned = 0.00301576 Jy
! Component: 550  -  total flux cleaned = 0.00301628 Jy
! Component: 600  -  total flux cleaned = 0.00307845 Jy
! Component: 650  -  total flux cleaned = 0.00310904 Jy
! Component: 700  -  total flux cleaned = 0.0031689 Jy
! Component: 750  -  total flux cleaned = 0.00311064 Jy
! Component: 800  -  total flux cleaned = 0.00311087 Jy
! Component: 850  -  total flux cleaned = 0.00316773 Jy
! Component: 900  -  total flux cleaned = 0.0031677 Jy
! Component: 950  -  total flux cleaned = 0.00319509 Jy
! Component: 1000  -  total flux cleaned = 0.00314033 Jy
! Component: 1050  -  total flux cleaned = 0.0031134 Jy
! Component: 1100  -  total flux cleaned = 0.00316577 Jy
! Component: 1150  -  total flux cleaned = 0.00308738 Jy
! Component: 1200  -  total flux cleaned = 0.00308775 Jy
! Component: 1250  -  total flux cleaned = 0.00311299 Jy
! Component: 1300  -  total flux cleaned = 0.00311287 Jy
! Component: 1350  -  total flux cleaned = 0.00308807 Jy
! Component: 1400  -  total flux cleaned = 0.00308866 Jy
! Component: 1450  -  total flux cleaned = 0.00318601 Jy
! Component: 1500  -  total flux cleaned = 0.00328196 Jy
! Component: 1550  -  total flux cleaned = 0.00332947 Jy
! Component: 1600  -  total flux cleaned = 0.00335317 Jy
! Component: 1650  -  total flux cleaned = 0.00342318 Jy
! Component: 1700  -  total flux cleaned = 0.00346916 Jy
! Component: 1750  -  total flux cleaned = 0.00346918 Jy
! Component: 1800  -  total flux cleaned = 0.00353728 Jy
! Component: 1850  -  total flux cleaned = 0.00358194 Jy
! Component: 1900  -  total flux cleaned = 0.00358179 Jy
! Component: 1950  -  total flux cleaned = 0.00366915 Jy
! Component: 2000  -  total flux cleaned = 0.00366864 Jy
! Component: 2050  -  total flux cleaned = 0.00362539 Jy
! Component: 2100  -  total flux cleaned = 0.00356135 Jy
! Component: 2150  -  total flux cleaned = 0.00366679 Jy
! Component: 2200  -  total flux cleaned = 0.00364558 Jy
! Component: 2250  -  total flux cleaned = 0.00368729 Jy
! Component: 2300  -  total flux cleaned = 0.00379017 Jy
! Component: 2350  -  total flux cleaned = 0.00374924 Jy
! Component: 2400  -  total flux cleaned = 0.00378964 Jy
! Component: 2450  -  total flux cleaned = 0.00374989 Jy
! Component: 2500  -  total flux cleaned = 0.00376999 Jy
! Component: 2550  -  total flux cleaned = 0.00384908 Jy
! Component: 2600  -  total flux cleaned = 0.00384931 Jy
! Component: 2650  -  total flux cleaned = 0.00390769 Jy
! Component: 2700  -  total flux cleaned = 0.00390784 Jy
! Component: 2750  -  total flux cleaned = 0.00392697 Jy
! Component: 2800  -  total flux cleaned = 0.00404095 Jy
! Component: 2850  -  total flux cleaned = 0.00407837 Jy
! Component: 2900  -  total flux cleaned = 0.00413435 Jy
! Component: 2950  -  total flux cleaned = 0.00409708 Jy
! Component: 3000  -  total flux cleaned = 0.00411571 Jy
! Component: 3050  -  total flux cleaned = 0.00420711 Jy
! Component: 3100  -  total flux cleaned = 0.00424337 Jy
! Component: 3150  -  total flux cleaned = 0.00427939 Jy
! Component: 3200  -  total flux cleaned = 0.00429728 Jy
! Component: 3250  -  total flux cleaned = 0.00429723 Jy
! Component: 3300  -  total flux cleaned = 0.00442085 Jy
! Component: 3350  -  total flux cleaned = 0.00442059 Jy
! Component: 3400  -  total flux cleaned = 0.00450763 Jy
! Component: 3450  -  total flux cleaned = 0.00459408 Jy
! Component: 3500  -  total flux cleaned = 0.00466302 Jy
! Component: 3550  -  total flux cleaned = 0.00474848 Jy
! Component: 3600  -  total flux cleaned = 0.0047655 Jy
! Component: 3650  -  total flux cleaned = 0.00484971 Jy
! Component: 3700  -  total flux cleaned = 0.00495038 Jy
! Component: 3750  -  total flux cleaned = 0.00498358 Jy
! Component: 3800  -  total flux cleaned = 0.00504995 Jy
! Component: 3850  -  total flux cleaned = 0.00514865 Jy
! Component: 3900  -  total flux cleaned = 0.0051813 Jy
! Component: 3950  -  total flux cleaned = 0.00531154 Jy
! Component: 4000  -  total flux cleaned = 0.00531148 Jy
! Component: 4050  -  total flux cleaned = 0.00540797 Jy
! Total flux subtracted in 4096 components = 0.00542399 Jy
! Clean residual min=-0.000992 max=0.001128 Jy/beam
! Clean residual mean=0.000003 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.142253 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 341 components and 0.142253 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J0642+3509_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.329 x 5.614 at 1.297 degrees (North through East)
! Clean map  min=-0.0015008  max=0.12354 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0642+3509_S_map.fits
wmodel /scr/pima/rv119_uvs/J0642+3509_S_map.mod
! Writing 341 model components to file: /scr/pima/rv119_uvs/J0642+3509_S_map.mod
wobs   /scr/pima/rv119_uvs/J0642+3509_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J0642+3509_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J0642+3509_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv119_uvs/J0642+3509_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123542 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277817 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.67463 0.67463 1.34926 2.69852 5.39704 10.7941 21.5882 43.1763 86.3526
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  444.688 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J0642+3509_S_dfm.log closed on Sun Dec 17 11:34:50 2017