! Started logfile: /scr/pima/rv119_uvs/J0551+3751_S_dfm.log on Sun Dec 17 11:34:30 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J0551+3751_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J0551+3751_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.932323 visibilities/baseline/integration-bin.
! Found source: J0551+3751
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7384 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0551+3751_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011100Jy  sigma=19.761950
! Fit after  self-cal, rms=0.911317Jy  sigma=17.860570
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.088 mas, bmaj=4.036 mas, bpa=-0.5494 degrees
! Estimated noise=0.772886 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0701579 Jy
! Component: 100  -  total flux cleaned = 0.0868083 Jy
! Total flux subtracted in 100 components = 0.0868083 Jy
! Clean residual min=-0.005641 max=0.007556 Jy/beam
! Clean residual mean=0.000002 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.0868083 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0868083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088251Jy  sigma=1.266740
! Fit after  self-cal, rms=0.088005Jy  sigma=1.259127
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.955 mas, bmaj=5.017 mas, bpa=2.753 degrees
! Estimated noise=0.450904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00735157 Jy
! Component: 100  -  total flux cleaned = 0.0112238 Jy
! Component: 150  -  total flux cleaned = 0.0131147 Jy
! Component: 200  -  total flux cleaned = 0.0137011 Jy
! Total flux subtracted in 200 components = 0.0137011 Jy
! Clean residual min=-0.003393 max=0.003368 Jy/beam
! Clean residual mean=-0.000001 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.100509 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 23 components and 0.100509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087196Jy  sigma=1.245768
! Fit after  self-cal, rms=0.087141Jy  sigma=1.244779
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.955 x 5.017 at 2.753 degrees (North through East)
! Clean map  min=-0.0032148  max=0.088931 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        0.98     KP        0.96     
!   LA        0.99     MK        1.03     NL        1.02     OV        1.01     
!   PT        0.98     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.99     OV        1.03     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.96     HN        1.17     KP        0.49     
!   LA        1.04     MK        1.28     NL        1.00*    OV        1.01     
!   PT        1.10     SC        0.60     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.01     KP        1.05     
!   LA        1.00     MK        1.02     NL        1.01     OV        1.02     
!   PT        1.05     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.087141Jy  sigma=1.244779
! Fit after  self-cal, rms=0.059868Jy  sigma=1.200732
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.951 mas, bmaj=5.043 mas, bpa=6.344 degrees
! Estimated noise=0.446507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000962541 Jy
! Component: 100  -  total flux cleaned = 0.000966856 Jy
! Component: 150  -  total flux cleaned = 0.000861333 Jy
! Component: 200  -  total flux cleaned = 0.000801819 Jy
! Total flux subtracted in 200 components = 0.000801819 Jy
! Clean residual min=-0.002605 max=0.002442 Jy/beam
! Clean residual mean=-0.000000 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.101311 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.101311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059828Jy  sigma=1.199352
! Fit after  self-cal, rms=0.060404Jy  sigma=1.189246
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060404Jy  sigma=1.189246
! Fit after  self-cal, rms=0.060697Jy  sigma=1.178474
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.929 mas, bmaj=5.028 mas, bpa=4.32 degrees
! Estimated noise=0.446278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225649 Jy
! Component: 100  -  total flux cleaned = 0.000166186 Jy
! Component: 150  -  total flux cleaned = 0.000117299 Jy
! Component: 200  -  total flux cleaned = 7.37952e-05 Jy
! Total flux subtracted in 200 components = 7.37952e-05 Jy
! Clean residual min=-0.002564 max=0.002487 Jy/beam
! Clean residual mean=-0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.101385 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 0.101385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060662Jy  sigma=1.177928
! Fit after  self-cal, rms=0.061618Jy  sigma=1.174180
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.5, 110.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253477 Jy
! Component: 100  -  total flux cleaned = 0.00371368 Jy
! Component: 150  -  total flux cleaned = 0.00372167 Jy
! Component: 200  -  total flux cleaned = 0.00361335 Jy
! Total flux subtracted in 200 components = 0.00361335 Jy
! Clean residual min=-0.002385 max=0.002193 Jy/beam
! Clean residual mean=0.000000 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.104998 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.104998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061514Jy  sigma=1.171103
! Fit after  self-cal, rms=0.061526Jy  sigma=1.170804
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061526Jy  sigma=1.170804
! Fit after  self-cal, rms=0.064248Jy  sigma=1.168551
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.917 mas, bmaj=5.028 mas, bpa=3.659 degrees
! Estimated noise=0.447627 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130604 Jy
! Component: 100  -  total flux cleaned = 0.00149547 Jy
! Component: 150  -  total flux cleaned = 0.00146365 Jy
! Component: 200  -  total flux cleaned = 0.0014071 Jy
! Total flux subtracted in 200 components = 0.0014071 Jy
! Clean residual min=-0.002340 max=0.002165 Jy/beam
! Clean residual mean=0.000001 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.106405 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 88 components and 0.106405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064206Jy  sigma=1.167554
! Fit after  self-cal, rms=0.065080Jy  sigma=1.166247
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.02444e-05 Jy
! Component: 100  -  total flux cleaned = -4.29918e-05 Jy
! Component: 150  -  total flux cleaned = -0.000165624 Jy
! Component: 200  -  total flux cleaned = -0.000233986 Jy
! Total flux subtracted in 200 components = -0.000233986 Jy
! Clean residual min=-0.002379 max=0.002236 Jy/beam
! Clean residual mean=-0.000001 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.106171 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 103 components and 0.106171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065063Jy  sigma=1.165810
! Fit after  self-cal, rms=0.065080Jy  sigma=1.165788
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065080Jy  sigma=1.165788
! Fit after  self-cal, rms=0.068296Jy  sigma=1.164913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.592 mas, bmaj=8.84 mas, bpa=2.325 degrees
! Estimated noise=0.565262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000530237 Jy
! Component: 100  -  total flux cleaned = 0.000664699 Jy
! Component: 150  -  total flux cleaned = 0.00069266 Jy
! Component: 200  -  total flux cleaned = 0.000695046 Jy
! Total flux subtracted in 200 components = 0.000695046 Jy
! Clean residual min=-0.002394 max=0.002768 Jy/beam
! Clean residual mean=0.000001 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.106866 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 113 components and 0.106866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068285Jy  sigma=1.164694
! Fit after  self-cal, rms=0.068976Jy  sigma=1.164163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.48967e-06 Jy
! Component: 100  -  total flux cleaned = -1.4689e-05 Jy
! Component: 150  -  total flux cleaned = -3.32113e-05 Jy
! Component: 200  -  total flux cleaned = -5.00853e-05 Jy
! Total flux subtracted in 200 components = -5.00853e-05 Jy
! Clean residual min=-0.002325 max=0.002724 Jy/beam
! Clean residual mean=-0.000001 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.106816 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 119 components and 0.106816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068977Jy  sigma=1.164103
! Fit after  self-cal, rms=0.068978Jy  sigma=1.164089
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.913 mas, bmaj=5.033 mas, bpa=3.545 degrees
! Estimated noise=0.448834 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.913 x 5.033 at 3.545 degrees (North through East)
! Clean map  min=-0.0022834  max=0.087619 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=4.035 mas, bpa=-1.046 degrees
! Estimated noise=0.757684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068467 Jy
! Component: 100  -  total flux cleaned = 0.0850005 Jy
! Component: 150  -  total flux cleaned = 0.092257 Jy
! Component: 200  -  total flux cleaned = 0.0969196 Jy
! Total flux subtracted in 200 components = 0.0969196 Jy
! Clean residual min=-0.003909 max=0.004059 Jy/beam
! Clean residual mean=-0.000000 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.0969196 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0969196 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.913 mas, bmaj=5.033 mas, bpa=3.545 degrees
! Estimated noise=0.448834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.5, 19).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375351 Jy
! Component: 100  -  total flux cleaned = 0.00641757 Jy
! Component: 150  -  total flux cleaned = 0.00829204 Jy
! Component: 200  -  total flux cleaned = 0.00941154 Jy
! Total flux subtracted in 200 components = 0.00941154 Jy
! Clean residual min=-0.002462 max=0.002298 Jy/beam
! Clean residual mean=0.000001 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.106331 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 40 components and 0.106331 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.592 mas, bmaj=8.84 mas, bpa=2.325 degrees
! Estimated noise=0.565262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145962 Jy
! Component: 100  -  total flux cleaned = 0.00196278 Jy
! Component: 150  -  total flux cleaned = 0.00209016 Jy
! Component: 200  -  total flux cleaned = 0.00220199 Jy
! Total flux subtracted in 200 components = 0.00220199 Jy
! Clean residual min=-0.002570 max=0.002456 Jy/beam
! Clean residual mean=-0.000001 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.108533 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.5912e-05 Jy
! Component: 100  -  total flux cleaned = 6.66363e-05 Jy
! Component: 150  -  total flux cleaned = 9.65846e-05 Jy
! Component: 200  -  total flux cleaned = 0.000149802 Jy
! Total flux subtracted in 200 components = 0.000149802 Jy
! Clean residual min=-0.002552 max=0.002451 Jy/beam
! Clean residual mean=-0.000002 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.108683 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 95 components and 0.108683 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.913 mas, bmaj=5.033 mas, bpa=3.545 degrees
! Estimated noise=0.448834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000691392 Jy
! Component: 100  -  total flux cleaned = 0.000725013 Jy
! Component: 150  -  total flux cleaned = 0.000693471 Jy
! Component: 200  -  total flux cleaned = 0.000664127 Jy
! Total flux subtracted in 200 components = 0.000664127 Jy
! Clean residual min=-0.002433 max=0.002314 Jy/beam
! Clean residual mean=-0.000001 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.109347 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 117 components and 0.109347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068940Jy  sigma=1.164437
! Fit after  self-cal, rms=0.068937Jy  sigma=1.164214
wmodel J0551+3751_S_map.mod
! Writing 117 model components to file: J0551+3751_S_map.mod
wobs   J0551+3751_S_uvs.fits
! Writing UV FITS file: J0551+3751_S_uvs.fits
wwins  J0551+3751_S_map.win
! wwins: Wrote 4 windows to J0551+3751_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108261 Jy
! Component: 100  -  total flux cleaned = 5.04457e-05 Jy
! Component: 150  -  total flux cleaned = 0.000161228 Jy
! Component: 200  -  total flux cleaned = 0.000304155 Jy
! Component: 250  -  total flux cleaned = 0.000614039 Jy
! Component: 300  -  total flux cleaned = 0.000747235 Jy
! Component: 350  -  total flux cleaned = 0.000812036 Jy
! Component: 400  -  total flux cleaned = 0.000812369 Jy
! Component: 450  -  total flux cleaned = 0.000751156 Jy
! Component: 500  -  total flux cleaned = 0.000660895 Jy
! Component: 550  -  total flux cleaned = 0.000572079 Jy
! Component: 600  -  total flux cleaned = 0.000484696 Jy
! Component: 650  -  total flux cleaned = 0.000370841 Jy
! Component: 700  -  total flux cleaned = 0.000427065 Jy
! Component: 750  -  total flux cleaned = 0.000454242 Jy
! Component: 800  -  total flux cleaned = 0.000454268 Jy
! Component: 850  -  total flux cleaned = 0.000373598 Jy
! Component: 900  -  total flux cleaned = 0.000321165 Jy
! Component: 950  -  total flux cleaned = 0.000295571 Jy
! Component: 1000  -  total flux cleaned = 0.000295403 Jy
! Component: 1050  -  total flux cleaned = 0.000295307 Jy
! Component: 1100  -  total flux cleaned = 0.000245547 Jy
! Component: 1150  -  total flux cleaned = 0.000345267 Jy
! Component: 1200  -  total flux cleaned = 0.000394046 Jy
! Component: 1250  -  total flux cleaned = 0.000442788 Jy
! Component: 1300  -  total flux cleaned = 0.000490953 Jy
! Component: 1350  -  total flux cleaned = 0.000609542 Jy
! Component: 1400  -  total flux cleaned = 0.000562415 Jy
! Component: 1450  -  total flux cleaned = 0.000678863 Jy
! Component: 1500  -  total flux cleaned = 0.000678814 Jy
! Component: 1550  -  total flux cleaned = 0.000701765 Jy
! Component: 1600  -  total flux cleaned = 0.000768747 Jy
! Component: 1650  -  total flux cleaned = 0.000723884 Jy
! Component: 1700  -  total flux cleaned = 0.000745633 Jy
! Component: 1750  -  total flux cleaned = 0.000657637 Jy
! Component: 1800  -  total flux cleaned = 0.000614565 Jy
! Component: 1850  -  total flux cleaned = 0.000636243 Jy
! Component: 1900  -  total flux cleaned = 0.000615017 Jy
! Component: 1950  -  total flux cleaned = 0.000572687 Jy
! Component: 2000  -  total flux cleaned = 0.000510013 Jy
! Component: 2050  -  total flux cleaned = 0.00048948 Jy
! Component: 2100  -  total flux cleaned = 0.000468686 Jy
! Component: 2150  -  total flux cleaned = 0.000427884 Jy
! Component: 2200  -  total flux cleaned = 0.000387434 Jy
! Component: 2250  -  total flux cleaned = 0.000367103 Jy
! Component: 2300  -  total flux cleaned = 0.000327275 Jy
! Component: 2350  -  total flux cleaned = 0.00032744 Jy
! Component: 2400  -  total flux cleaned = 0.000307529 Jy
! Component: 2450  -  total flux cleaned = 0.00032677 Jy
! Component: 2500  -  total flux cleaned = 0.000268363 Jy
! Component: 2550  -  total flux cleaned = 0.000133431 Jy
! Component: 2600  -  total flux cleaned = 0.000133594 Jy
! Component: 2650  -  total flux cleaned = 3.86263e-05 Jy
! Component: 2700  -  total flux cleaned = 1.98769e-05 Jy
! Component: 2750  -  total flux cleaned = -1.73783e-05 Jy
! Component: 2800  -  total flux cleaned = -3.61272e-05 Jy
! Component: 2850  -  total flux cleaned = -7.30585e-05 Jy
! Component: 2900  -  total flux cleaned = -7.32699e-05 Jy
! Component: 2950  -  total flux cleaned = -0.000201162 Jy
! Component: 3000  -  total flux cleaned = -0.000201091 Jy
! Component: 3050  -  total flux cleaned = -0.000219172 Jy
! Component: 3100  -  total flux cleaned = -0.000255032 Jy
! Component: 3150  -  total flux cleaned = -0.000255021 Jy
! Component: 3200  -  total flux cleaned = -0.000255066 Jy
! Component: 3250  -  total flux cleaned = -0.000272827 Jy
! Component: 3300  -  total flux cleaned = -0.000307767 Jy
! Component: 3350  -  total flux cleaned = -0.000359959 Jy
! Component: 3400  -  total flux cleaned = -0.000325229 Jy
! Component: 3450  -  total flux cleaned = -0.000393962 Jy
! Component: 3500  -  total flux cleaned = -0.000359847 Jy
! Component: 3550  -  total flux cleaned = -0.000444962 Jy
! Component: 3600  -  total flux cleaned = -0.000411088 Jy
! Component: 3650  -  total flux cleaned = -0.000478457 Jy
! Component: 3700  -  total flux cleaned = -0.000495181 Jy
! Component: 3750  -  total flux cleaned = -0.000561742 Jy
! Component: 3800  -  total flux cleaned = -0.000561742 Jy
! Component: 3850  -  total flux cleaned = -0.000627641 Jy
! Component: 3900  -  total flux cleaned = -0.000676717 Jy
! Component: 3950  -  total flux cleaned = -0.000676676 Jy
! Component: 4000  -  total flux cleaned = -0.000692914 Jy
! Component: 4050  -  total flux cleaned = -0.000628522 Jy
! Total flux subtracted in 4096 components = -0.000676589 Jy
! Clean residual min=-0.001130 max=0.001031 Jy/beam
! Clean residual mean=0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.108671 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 412 components and 0.108671 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J0551+3751_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.913 x 5.033 at 3.545 degrees (North through East)
! Clean map  min=-0.0018825  max=0.087427 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0551+3751_S_map.fits
wmodel /scr/pima/rv119_uvs/J0551+3751_S_map.mod
! Writing 412 model components to file: /scr/pima/rv119_uvs/J0551+3751_S_map.mod
wobs   /scr/pima/rv119_uvs/J0551+3751_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J0551+3751_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J0551+3751_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rv119_uvs/J0551+3751_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0874273 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000290369 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.996379 0.996379 1.99276 3.98552 7.97103 15.9421 31.8841 63.7682
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  301.09 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J0551+3751_S_dfm.log closed on Sun Dec 17 11:34:35 2017