! Started logfile: /scr/pima/rv119_uvs/J0538-4405_S_dfm.log on Sun Dec 17 11:34:26 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv119_uvs/J0538-4405_S_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J0538-4405_S_uva.fits
! AN table 1: 12 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.531746 visibilities/baseline/integration-bin.
! Found source: J0538-4405
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 536 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0538-4405_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=4.390144Jy  sigma=31.387164
! Fit after  self-cal, rms=3.480302Jy  sigma=24.063584
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.181 mas, bmaj=7.08 mas, bpa=-4.032 degrees
! Estimated noise=4.95098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.47124 Jy
! Component: 100  -  total flux cleaned = 3.19394 Jy
! Total flux subtracted in 100 components = 3.19394 Jy
! Clean residual min=-0.340049 max=0.369329 Jy/beam
! Clean residual mean=-0.000785 rms=0.096966 Jy/beam
! Combined flux in latest and established models = 3.19394 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 3.19394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.236746Jy  sigma=14.447145
! Fit after  self-cal, rms=2.236581Jy  sigma=14.445206
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.907 mas, bmaj=8.827 mas, bpa=-3.445 degrees
! Estimated noise=4.13708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.455016 Jy
! Component: 100  -  total flux cleaned = 0.603898 Jy
! Component: 150  -  total flux cleaned = 0.628012 Jy
! Component: 200  -  total flux cleaned = 0.636768 Jy
! Total flux subtracted in 200 components = 0.636768 Jy
! Clean residual min=-0.316819 max=0.299828 Jy/beam
! Clean residual mean=0.002095 rms=0.077414 Jy/beam
! Combined flux in latest and established models = 3.83071 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 3.83071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.118720Jy  sigma=14.037438
! Fit after  self-cal, rms=2.118427Jy  sigma=14.032334
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.907 x 8.827 at -3.445 degrees (North through East)
! Clean map  min=-0.30476  max=3.4252 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        1.06     LA        1.04     MK        1.14     
!   OV        1.10     PT        1.05     SC        1.40     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        1.06     LA        1.05     MK        1.12     
!   OV        1.10     PT        1.05     SC        1.42     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        0.41     LA        1.10     MK        0.94     
!   OV        1.10     PT        1.06     SC        0.55     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        1.08     LA        1.05     MK        1.11     
!   OV        1.01     PT        1.04     SC        1.42     
! 
! 
! Fit before self-cal, rms=2.118427Jy  sigma=14.032334
! Fit after  self-cal, rms=0.314020Jy  sigma=2.127359
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.886 mas, bmaj=8.635 mas, bpa=-2.862 degrees
! Estimated noise=4.2664 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00511984 Jy
! Component: 100  -  total flux cleaned = 0.00397414 Jy
! Component: 150  -  total flux cleaned = 0.00387434 Jy
! Component: 200  -  total flux cleaned = 0.00468372 Jy
! Total flux subtracted in 200 components = 0.00468372 Jy
! Clean residual min=-0.037464 max=0.041323 Jy/beam
! Clean residual mean=-0.000890 rms=0.010412 Jy/beam
! Combined flux in latest and established models = 3.83539 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 28 components and 3.83539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.306230Jy  sigma=2.030728
! Fit after  self-cal, rms=0.305865Jy  sigma=2.022233
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.305865Jy  sigma=2.022233
! Fit after  self-cal, rms=0.293101Jy  sigma=1.901239
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.884 mas, bmaj=8.636 mas, bpa=-2.863 degrees
! Estimated noise=4.28032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126685 Jy
! Component: 100  -  total flux cleaned = 0.0133265 Jy
! Component: 150  -  total flux cleaned = 0.0144761 Jy
! Component: 200  -  total flux cleaned = 0.0149978 Jy
! Total flux subtracted in 200 components = 0.0149978 Jy
! Clean residual min=-0.037468 max=0.040133 Jy/beam
! Clean residual mean=-0.000730 rms=0.009571 Jy/beam
! Combined flux in latest and established models = 3.85039 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 32 components and 3.85039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.289051Jy  sigma=1.871774
! Fit after  self-cal, rms=0.288938Jy  sigma=1.868349
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215171 Jy
! Component: 100  -  total flux cleaned = 0.001699 Jy
! Component: 150  -  total flux cleaned = 0.00166087 Jy
! Component: 200  -  total flux cleaned = 0.00125218 Jy
! Total flux subtracted in 200 components = 0.00125218 Jy
! Clean residual min=-0.036294 max=0.038330 Jy/beam
! Clean residual mean=-0.000724 rms=0.009410 Jy/beam
! Combined flux in latest and established models = 3.85164 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 3.85164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.287416Jy  sigma=1.856764
! Fit after  self-cal, rms=0.287378Jy  sigma=1.855399
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.287378Jy  sigma=1.855399
! Fit after  self-cal, rms=0.118662Jy  sigma=1.035533
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.883 mas, bmaj=8.627 mas, bpa=-2.917 degrees
! Estimated noise=4.28029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00529836 Jy
! Component: 100  -  total flux cleaned = 0.0049207 Jy
! Component: 150  -  total flux cleaned = 0.00457314 Jy
! Component: 200  -  total flux cleaned = 0.00426007 Jy
! Total flux subtracted in 200 components = 0.00426007 Jy
! Clean residual min=-0.028195 max=0.028146 Jy/beam
! Clean residual mean=0.000082 rms=0.005156 Jy/beam
! Combined flux in latest and established models = 3.8559 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 36 components and 3.8559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116560Jy  sigma=1.020137
! Fit after  self-cal, rms=0.116444Jy  sigma=1.018573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.5, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166553 Jy
! Component: 100  -  total flux cleaned = 0.0142724 Jy
! Component: 150  -  total flux cleaned = 0.0122907 Jy
! Component: 200  -  total flux cleaned = 0.0118934 Jy
! Total flux subtracted in 200 components = 0.0118934 Jy
! Clean residual min=-0.024041 max=0.018253 Jy/beam
! Clean residual mean=0.000144 rms=0.004459 Jy/beam
! Combined flux in latest and established models = 3.86779 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 3.86779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108587Jy  sigma=0.968492
! Fit after  self-cal, rms=0.108150Jy  sigma=0.963188
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108150Jy  sigma=0.963188
! Fit after  self-cal, rms=0.104083Jy  sigma=0.937062
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.26 mas, bmaj=35.52 mas, bpa=1.059 degrees
! Estimated noise=5.68724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401779 Jy
! Component: 100  -  total flux cleaned = 0.00449119 Jy
! Component: 150  -  total flux cleaned = 0.00468059 Jy
! Component: 200  -  total flux cleaned = 0.00476736 Jy
! Total flux subtracted in 200 components = 0.00476736 Jy
! Clean residual min=-0.011635 max=0.011962 Jy/beam
! Clean residual mean=0.000183 rms=0.004395 Jy/beam
! Combined flux in latest and established models = 3.87256 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 3.87256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102906Jy  sigma=0.933053
! Fit after  self-cal, rms=0.102800Jy  sigma=0.931660
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159553 Jy
! Component: 100  -  total flux cleaned = 0.00171153 Jy
! Component: 150  -  total flux cleaned = 0.00170509 Jy
! Component: 200  -  total flux cleaned = 0.00170141 Jy
! Total flux subtracted in 200 components = 0.00170141 Jy
! Clean residual min=-0.011371 max=0.011950 Jy/beam
! Clean residual mean=0.000199 rms=0.004428 Jy/beam
! Combined flux in latest and established models = 3.87426 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 58 components and 3.87426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102612Jy  sigma=0.931535
! Fit after  self-cal, rms=0.102574Jy  sigma=0.930438
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.881 mas, bmaj=8.622 mas, bpa=-2.965 degrees
! Estimated noise=4.27359 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.881 x 8.622 at -2.965 degrees (North through East)
! Clean map  min=-0.022429  max=3.4224 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102574Jy  sigma=0.930438
! Fit after  self-cal, rms=0.091022Jy  sigma=0.687655
! Inverting map and beam 
! Estimated beam: bmin=2.882 mas, bmaj=8.624 mas, bpa=-3.003 degrees
! Estimated noise=4.27111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000824124 Jy
! Component: 100  -  total flux cleaned = -0.0005037 Jy
! Component: 150  -  total flux cleaned = -0.00160762 Jy
! Component: 200  -  total flux cleaned = -0.00137217 Jy
! Total flux subtracted in 200 components = -0.00137217 Jy
! Clean residual min=-0.019292 max=0.013712 Jy/beam
! Clean residual mean=0.000085 rms=0.003633 Jy/beam
! Combined flux in latest and established models = 3.87289 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 3.87289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089063Jy  sigma=0.670910
! Fit after  self-cal, rms=0.089029Jy  sigma=0.669102
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147418 Jy
! Component: 100  -  total flux cleaned = 0.00126966 Jy
! Component: 150  -  total flux cleaned = 0.0014435 Jy
! Component: 200  -  total flux cleaned = 0.00160784 Jy
! Total flux subtracted in 200 components = 0.00160784 Jy
! Clean residual min=-0.017660 max=0.013514 Jy/beam
! Clean residual mean=0.000093 rms=0.003552 Jy/beam
! Combined flux in latest and established models = 3.8745 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 3.8745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088256Jy  sigma=0.662275
! Fit after  self-cal, rms=0.088270Jy  sigma=0.661619
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088270Jy  sigma=0.661619
! Fit after  self-cal, rms=0.088101Jy  sigma=0.657647
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=6.961 mas, bpa=-4.037 degrees
! Estimated noise=5.29051 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.52301 Jy
! Component: 100  -  total flux cleaned = 3.29413 Jy
! Component: 150  -  total flux cleaned = 3.62267 Jy
! Component: 200  -  total flux cleaned = 3.76799 Jy
! Total flux subtracted in 200 components = 3.76799 Jy
! Clean residual min=-0.058466 max=0.067950 Jy/beam
! Clean residual mean=-0.000182 rms=0.012535 Jy/beam
! Combined flux in latest and established models = 3.76799 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 3.76799 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.881 mas, bmaj=8.627 mas, bpa=-3.013 degrees
! Estimated noise=4.26899 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0731545 Jy
! Component: 100  -  total flux cleaned = 0.0951416 Jy
! Component: 150  -  total flux cleaned = 0.0985547 Jy
! Component: 200  -  total flux cleaned = 0.10134 Jy
! Total flux subtracted in 200 components = 0.10134 Jy
! Clean residual min=-0.022821 max=0.023602 Jy/beam
! Clean residual mean=0.000040 rms=0.004888 Jy/beam
! Combined flux in latest and established models = 3.86933 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 3.86933 Jy
! Inverting map 
! Added new window around map position (-6.5, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123569 Jy
! Component: 100  -  total flux cleaned = 0.000334331 Jy
! Component: 150  -  total flux cleaned = 0.00245187 Jy
! Component: 200  -  total flux cleaned = 0.00307355 Jy
! Total flux subtracted in 200 components = 0.00307355 Jy
! Clean residual min=-0.014738 max=0.013710 Jy/beam
! Clean residual mean=0.000055 rms=0.003621 Jy/beam
! Combined flux in latest and established models = 3.8724 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 3.8724 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.25 mas, bmaj=35.51 mas, bpa=1.022 degrees
! Estimated noise=5.67902 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102597 Jy
! Component: 100  -  total flux cleaned = 0.000312451 Jy
! Component: 150  -  total flux cleaned = 0.00049039 Jy
! Component: 200  -  total flux cleaned = 0.000566721 Jy
! Total flux subtracted in 200 components = 0.000566721 Jy
! Clean residual min=-0.010706 max=0.010822 Jy/beam
! Clean residual mean=0.000098 rms=0.003751 Jy/beam
! Combined flux in latest and established models = 3.87297 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.1375e-05 Jy
! Component: 100  -  total flux cleaned = 5.84433e-05 Jy
! Component: 150  -  total flux cleaned = 5.83097e-05 Jy
! Component: 200  -  total flux cleaned = 0.000121934 Jy
! Total flux subtracted in 200 components = 0.000121934 Jy
! Clean residual min=-0.010704 max=0.010762 Jy/beam
! Clean residual mean=0.000098 rms=0.003736 Jy/beam
! Combined flux in latest and established models = 3.87309 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 3.87309 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.881 mas, bmaj=8.627 mas, bpa=-3.013 degrees
! Estimated noise=4.26899 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00036704 Jy
! Component: 100  -  total flux cleaned = 0.000363478 Jy
! Component: 150  -  total flux cleaned = 0.00037024 Jy
! Component: 200  -  total flux cleaned = 0.000701724 Jy
! Total flux subtracted in 200 components = 0.000701724 Jy
! Clean residual min=-0.013056 max=0.012373 Jy/beam
! Clean residual mean=0.000060 rms=0.003166 Jy/beam
! Combined flux in latest and established models = 3.87379 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 3.87379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085877Jy  sigma=0.636317
! Fit after  self-cal, rms=0.084717Jy  sigma=0.621897
wmodel J0538-4405_S_map.mod
! Writing 69 model components to file: J0538-4405_S_map.mod
wobs   J0538-4405_S_uvs.fits
! Writing UV FITS file: J0538-4405_S_uvs.fits
wwins  J0538-4405_S_map.win
! wwins: Wrote 3 windows to J0538-4405_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128988 Jy
! Component: 100  -  total flux cleaned = -0.00167994 Jy
! Component: 150  -  total flux cleaned = -0.00113046 Jy
! Component: 200  -  total flux cleaned = -0.00095152 Jy
! Component: 250  -  total flux cleaned = -0.000790524 Jy
! Component: 300  -  total flux cleaned = 0.000151471 Jy
! Component: 350  -  total flux cleaned = 0.00106185 Jy
! Component: 400  -  total flux cleaned = 0.00150658 Jy
! Component: 450  -  total flux cleaned = 0.00235105 Jy
! Component: 500  -  total flux cleaned = 0.00275767 Jy
! Component: 550  -  total flux cleaned = 0.00289258 Jy
! Component: 600  -  total flux cleaned = 0.00314985 Jy
! Component: 650  -  total flux cleaned = 0.00327563 Jy
! Component: 700  -  total flux cleaned = 0.00363951 Jy
! Component: 750  -  total flux cleaned = 0.00375678 Jy
! Component: 800  -  total flux cleaned = 0.0037568 Jy
! Component: 850  -  total flux cleaned = 0.00386881 Jy
! Component: 900  -  total flux cleaned = 0.00397648 Jy
! Component: 950  -  total flux cleaned = 0.00365309 Jy
! Component: 1000  -  total flux cleaned = 0.00344121 Jy
! Component: 1050  -  total flux cleaned = 0.00292923 Jy
! Component: 1100  -  total flux cleaned = 0.00282847 Jy
! Component: 1150  -  total flux cleaned = 0.00243611 Jy
! Component: 1200  -  total flux cleaned = 0.00243742 Jy
! Component: 1250  -  total flux cleaned = 0.00224601 Jy
! Component: 1300  -  total flux cleaned = 0.0020601 Jy
! Component: 1350  -  total flux cleaned = 0.00178795 Jy
! Component: 1400  -  total flux cleaned = 0.00161113 Jy
! Component: 1450  -  total flux cleaned = 0.00152572 Jy
! Component: 1500  -  total flux cleaned = 0.00118287 Jy
! Component: 1550  -  total flux cleaned = 0.00101565 Jy
! Component: 1600  -  total flux cleaned = 0.00109766 Jy
! Component: 1650  -  total flux cleaned = 0.000932535 Jy
! Component: 1700  -  total flux cleaned = 0.000854354 Jy
! Component: 1750  -  total flux cleaned = 0.000774484 Jy
! Component: 1800  -  total flux cleaned = 0.000695367 Jy
! Component: 1850  -  total flux cleaned = 0.000467166 Jy
! Component: 1900  -  total flux cleaned = 0.000318105 Jy
! Component: 1950  -  total flux cleaned = 0.0001704 Jy
! Component: 2000  -  total flux cleaned = -0.000119608 Jy
! Component: 2050  -  total flux cleaned = -0.000475204 Jy
! Component: 2100  -  total flux cleaned = -0.00061438 Jy
! Component: 2150  -  total flux cleaned = -0.000614431 Jy
! Component: 2200  -  total flux cleaned = -0.000957438 Jy
! Component: 2250  -  total flux cleaned = -0.00102443 Jy
! Component: 2300  -  total flux cleaned = -0.00128967 Jy
! Component: 2350  -  total flux cleaned = -0.00142142 Jy
! Component: 2400  -  total flux cleaned = -0.00180878 Jy
! Component: 2450  -  total flux cleaned = -0.00187307 Jy
! Component: 2500  -  total flux cleaned = -0.00218926 Jy
! Component: 2550  -  total flux cleaned = -0.00200153 Jy
! Component: 2600  -  total flux cleaned = -0.00224945 Jy
! Component: 2650  -  total flux cleaned = -0.00206581 Jy
! Component: 2700  -  total flux cleaned = -0.00212821 Jy
! Component: 2750  -  total flux cleaned = -0.00224731 Jy
! Component: 2800  -  total flux cleaned = -0.0020724 Jy
! Component: 2850  -  total flux cleaned = -0.00224658 Jy
! Component: 2900  -  total flux cleaned = -0.00224773 Jy
! Component: 2950  -  total flux cleaned = -0.00247609 Jy
! Component: 3000  -  total flux cleaned = -0.00247565 Jy
! Component: 3050  -  total flux cleaned = -0.00247598 Jy
! Component: 3100  -  total flux cleaned = -0.00258573 Jy
! Component: 3150  -  total flux cleaned = -0.00258543 Jy
! Component: 3200  -  total flux cleaned = -0.00258514 Jy
! Component: 3250  -  total flux cleaned = -0.00253143 Jy
! Component: 3300  -  total flux cleaned = -0.00253148 Jy
! Component: 3350  -  total flux cleaned = -0.00258397 Jy
! Component: 3400  -  total flux cleaned = -0.00253221 Jy
! Component: 3450  -  total flux cleaned = -0.00248074 Jy
! Component: 3500  -  total flux cleaned = -0.00248049 Jy
! Component: 3550  -  total flux cleaned = -0.00238012 Jy
! Component: 3600  -  total flux cleaned = -0.00253024 Jy
! Component: 3650  -  total flux cleaned = -0.0023315 Jy
! Component: 3700  -  total flux cleaned = -0.00223402 Jy
! Component: 3750  -  total flux cleaned = -0.0022342 Jy
! Component: 3800  -  total flux cleaned = -0.0021371 Jy
! Component: 3850  -  total flux cleaned = -0.00199256 Jy
! Component: 3900  -  total flux cleaned = -0.00184963 Jy
! Component: 3950  -  total flux cleaned = -0.00175507 Jy
! Component: 4000  -  total flux cleaned = -0.001615 Jy
! Component: 4050  -  total flux cleaned = -0.00147621 Jy
! Total flux subtracted in 4096 components = -0.0012467 Jy
! Clean residual min=-0.002745 max=0.002995 Jy/beam
! Clean residual mean=0.000000 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 3.87254 Jy
keep
! Adding 245 model components to the UV plane model.
! The established model now contains 314 components and 3.87254 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J0538-4405_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.881 x 8.627 at -3.013 degrees (North through East)
! Clean map  min=-0.023382  max=3.3933 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0538-4405_S_map.fits
wmodel /scr/pima/rv119_uvs/J0538-4405_S_map.mod
! Writing 314 model components to file: /scr/pima/rv119_uvs/J0538-4405_S_map.mod
wobs   /scr/pima/rv119_uvs/J0538-4405_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J0538-4405_S_uvs.fits
wwins  /scr/pima/rv119_uvs/J0538-4405_S_map.win
! wwins: Wrote 4 windows to /scr/pima/rv119_uvs/J0538-4405_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 3.39329 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000874261 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0772933 0.0772933 0.154587 0.309173 0.618347 1.23669 2.47339 4.94677 9.89355 19.7871 39.5742 79.1484
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0026 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       3.393 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3881.32 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J0538-4405_S_dfm.log closed on Sun Dec 17 11:34:30 2017